Documente Academic
Documente Profesional
Documente Cultură
4. SCADA systems encompass the transfer of data between a central host computer and a number of
______________and/or Programmable Logic Controllers (PLCs), and the central host and the
operator terminals.
a] Remote Terminal Units (RTUs) b] DCS c] Microcontroller
5. A SCADA system performs Data acquisition, Networked data communication, _________ and
Control.
a]Data representation b] DCS c] Microcontroller
8. A collection of standard and/or custom software systems used to provide the SCADA
central host and operator terminal application, support the communications system, and
monitor and control remotely located field data interface devices called as______
a] Human Machine Interface (HMI) b] DCS c] PLC
9. combine communications paths to and from many RTUs into a single bit stream, usually
using time division multiplexing (TDM) or other such bit stream manipulation
techniques.
a] Human Machine Interface (HMI) b] Multiplexers c] PLC
10. _______may employ one or more workstations and can be configured at the workstation
or by an off-line personal computer.
3. PLCs having less than ______ inputs and outputs are called as Small PLC
A]50 b]200 c]100
4. Small PLCs have a memory from ___________ to store the user’s logic programs.
A] 2KB to 10KB b] 10KB to 20KB c] 20KB to 30KB
5. Medium PLC have ____________ inputs and outputs.
A]4000 to 8000 b] 1000to 4000 c] 100 to 200
6. To protect a PLC from any incoming surges from the field , isolated devices such as
_________are used.
A]Transformer b]ADC c]Transducer
8. ________ language can be generated separately and then downloaded separately in the
PC.
A]online b]offline c]Basic
9. The__________ instruction is used to turn an output on or off after its timer has been on
for a preset time interval.
A] Retentive Time b]timer on delay c]Timer off delay