Documente Academic
Documente Profesional
Documente Cultură
LABORATORY SINKS
Sinks and cup sinks made of Technical Ceramics
Technical description
www.friatec.com/ceramics
TABLE OF CONTENTS
INTRODUCTION 05
ACCESSORIES 18
MOUNTING INSTRUCTIONS 20
Built-in versions 22
Free-standing versions 23
03
INTRODUCTION
LABORATORY SINKS
FRIDURIT sinks made of Technical Ceramics have been used for many years
in a wide variety of laboratory applications. FRIDURIT Technical Ceramics is a
superior-quality siliceous material produced using natural raw materials such as
clay, kaolin and feldpar in a special kilning process at temperatures exceeding
1200 °C.
FRIDURIT wall-mounted sinks with FRIDURIT sinks for installation in FRIDURIT cup sinks for installation in
integrated backsplash laboratory benchtops laboratory benchtops
Thanks to its pore-free surface FRIDURIT sodium hydroxide, even when used at example of “green” building materials,
Technical Ceramics offers a unique high concentrations and temperatures which represent an important element
combination of chemical, temperature, and with a long reaction time. in implementing “Green Building”
scratch and abrasion resistance. concepts. These concepts (e.g
With this material profile a perfect ■■ microbiologically pure LEED, BREEAM) increase resource
working environment can be created FRIDURIT laboratory sinks can be efficiency in buildings while at the
and permanently maintained. Even decontaminated and disinfected. Their same time reducing damaging effects
after years of intensive use FRIDURIT permanently sealed surfaces preclude on both health and the environment.
laboratory sinks look just like new. breeding grounds for viruses, bacteria Laboratory staff are thus active in
or germs. a working environment that is free
Technical Ceramics – natural material of of emissions and thoroughly safe.
a very special kind: ■■ scratch-proof FRIDURIT Technical Ceramics is
FRIDURIT laboratory sinks always look nonflammable (Euroclass A1) and
■■ easy to clean just like new. Their exceptional scratch does not increase the fire load of
FRIDURIT laboratory sinks made of resistance prevents any sign of wear. buildings.
Technical Ceramics pose no problems
in terms of cleaning. Whether soiled ■■ heat resistant The FRIDURIT Technical Ceramics
by dyes, varnishes, dirt or grease - FRIDURIT Technical Ceramics is manufacturing process takes place
they can all be removed without trace. resistant to heat from open flames and in accordance with ISO standards
Thanks to their extreme hardness hot objects up to temperatures of 500 for general process management
and abrasion resistance our Technical degrees Celsius. It is non-flammable (ISO 9001:2008), for adherence to
Ceramics products remain totally and completely fire-proof. environmental aspects (ISO 14001:2004)
unaffected, even after undergoing and for implementing an energy
repeated cleaning with aggressive ■■ environmentally compatible management system (ISO 50001:2011).
cleaning agents and tools. FRIDURIT Technical Ceramics is Sustained development and viability
manufactured purely and simply is the maxim for using FRIDURIT
■■ resistant to chemicals from natural earth resources, such Laboratory Technology. This is why we
FRIDURIT Technical Ceramics products as clay, kaolin and feldspar. Such are also a member of EGNATON – The
are fully resistant to solvents and material, which contains no chemical European Association for Sustainable
chemicals commonly used in the substances, poses no problems Laboratory Technologies.
laboratory, e.g. aqua regia, hydrochloric in terms of recycling. FRIDURIT
acid, sulphuric acid, nitric acid and Technical Ceramics is thus a classic
GLAZE COLOURS
A wide range of glaze colours as well as
the option of selecting special colours
make FRIDURIT laboratory sinks made of
Technical Ceramics products that satisfy
the very highest aesthetically demands. Pure white Light grey Diamond grey Grand Canyon Grey blue
The figure on the right shows a selection of
glaze colours available. Laboratory sinks are
available in plain colour glaze.
We will be pleased to send you ceramic
colour samples upon request.
(Colours may vary from those illustrated.)
Dark blue Opal green Terra brown Black
SINKS
FRIDURIT sinks made of Technical Ceramics (chemical-
technical stoneware) are the ideal match for FRIDURIT
laboratory benchtops. They are glazed on the inside and
around the edges and are supplied with a 1½“ male screw PP
outlet with integrated soil trap and a standpipe.
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
400 400 250 460 ±3
460 ±3
273 20 VBES442
500 400 250 560±3 460±3 273 25 VBES542
600 400 250 660±3 460 ±3
273 27 VBES642
L
85 85
11
h
LL BB
l l bb
45
R40
8585 8585
11
11
t
t
h
h
45
45
R40
R40
1 ½“
1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
250 95 112 294±3 140±3 185 2.4 VBPE291
L B
l b
7
h
LL BB
45
ll bb
1 ½“
77
R70
tt
hh
45
45
1 1½“
½“
R70
R70
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
Øb t B h
105 112 145 ±3
185 1,5 VBPE111
B
b
7
t
h
B
b
45
7
1 ½“
t
h
45
1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
350 350 300 420 420 322 26 VBPS333-OUE
400 400 250 476 476 272 26 VBPS442-OUE
500 400 300 576 476 322 35 VBPS543-OUE
L
600 400 300 676 476 322 38 VBPS643-OUE
l
800 400 300 876 476 322 63 VBPS843-OUE
h
BB
45
LL bb 1 ½“
l l 8585
t
t
h
h
45
45
1 ½“
1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
350 350 300 420 420 322 28 L VBPS333
400 400 250 476 476 272 28 VBPS442
l
500 400 300 576 476 322 37 VBPS543
600 400 300 676 476 322 40 VBPS643
800 400 300 876 476 322 59 VBPS843
h
83
B B
1 ½“
L L b b
l l 85 85
h
t
83
83
1 ½“ 1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
810 410 300 885 485 322 65 VBPD843
90
h
95
L L B B
1 ½“
l l b b
90 85 85
90
t
t
h
h
95
95
1 ½“ 1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
B B
45
L L b b 1 ½“
l l 85 85
t
t
h
h
45
45
1 ½“
1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
500 400 300 576 476 322 37 VBSS543
600 400 300 676 476 322 40 L VBSS643
800 400 300 876 476 322 59 VBSS843
l
1000 400 300 1076 476 322 70 VBSS143
h
83
B B
L L b b 1 ½“
l l 85 85
h
h
t
t
83
83
1 ½“1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
810 410 300 885 485 322 65 VBSD843
90
h
95
L L B B
1 ½“
l l b b
90 90 85 85
t
h
t
h
95
95
1 ½“ 1 ½“
Internal dimensions (in mm) External dimensions (in mm) Weight (in kg) Order code
l b t L B h
550 350 180 630 430 202 35 VBSW531
L
l
474
118
10
60
h
L L B B
83
l l b b
1 ½“
474474 85 85
118
10
118
10
60
60
t
h
t
h
83
83
1 ½“1 ½“
P-TRAP
A polypropylene waste trap (stench trap) is available for
connection to the waste-water pipe.
1 1/2“
Ø 50
TOP-MOUNTED
Sinks are top-mounted in a cut aperture (unglazed) of the
full-size FRIDURIT laboratory benchtop and then sealed with
silicon. Uncontrolled leakage of liquid into the waste-water
system can thus be prevented.
FLUSH-MOUNTED
Sinks are flush-mounted in the stepped aperture (unglazed)
of the full-size FRIDURIT laboratory benchtop and sealed with
permantly elastic silicone or by means of hardening.
UNDER-FIXED
Sinks can be joined to the full-size FRIDURIT laboratory
benchtops by means of hardening. No additional sink-support
structures are in this case needed.
www.friatec.com/ceramics WEBLINK