Documente Academic
Documente Profesional
Documente Cultură
LG Electronics
BLUETOOTH ® Stereo Headset
HBS-250 User manual
Before use 3
How to use 3 The LG HBS-250 is a super lightweight and compact Bluetooth®
- Charging 5 wireless stereo headset that produces hi-fi stereo sound. It also
- Low battery 5 offers crystal clear sound via noise reduction and echo cancellation
- Button Hold 5 during a phone call using DSP (digital signal processing)
- Battery status 5 technology. This product can be used as an audio accessory for
- Power on 5
devices supporting either the A2DP or Handsfree Bluetooth® Profile.
- Power off 6
- Easy Pairing 6
- Pairing (Manual) 6
- Connecting (Previously Paired) 7 Package contents
- Multi-connection 7
- Volume control 8
- Audio streaming 8
�PLAY 8
�PAUSE 8
�STOP 8
�NEXT SONG 8
�PREVIOUS SONG 8
�FAST FORWARD 8
�REWIND 8
- Calling 8
�Answering a call 8
Bluetooth® Stereo User manual
�Voice dialing 9
headset
�Last number redialing 9
�Ending a call 9
�Transferring a call 9
�Call waiting 9
�Call Reject 9
�MIC MUTE 9
Summary of button functions 10
LED indication 11
Troubleshooting 11
Specification 12
Precautions 13 External sound Charger WEEE Card
Declaration of confirmation 13 cable
Additional information 14
2 3
Description of parts How to use
Front Charging
- Remove the cover on the charging port and connect the charger.
- While charging, the LED will remain on.
- The Headset can not function while charging.
MUSIC JOG dial - It takes 2 hours to fully charge the Headset.
PWR/CALL button - When charging is complete, the LED will turn off.
Low battery
External sound/
Charging port - You will hear a beep tone periodically at low battery.
- When the battery is not charged, the Headset will turn off.
Back Button Hold
- Button Hold mode prevents any button from being pressed
EQ/HOLD button unintentionally.
- Press and hold EQ/HOLD button for 3 seconds to turn on the mode.
Volume Control - Press and hold EQ/HOLD button for 3 seconds again to turn off the mode.
- Button Hold mode is available even when HBS-250 is powered-off.
- If you press any button of powered-on Headset in Button Hold mode,
beep and LED alerts notify you of the mode.
MIC - If you try to turn on the Headset in Button Hold mode, beep and LED
alerts notify you of the mode, too. You should turn off the Button Hold
mode first.
Wearing Battery status
Charging Port By pressing briefly the Volume-Up button and Volume-Down button
simultaneously, the battery status can be checked by the number of
LED flashes.
Number of red flashes 4 flashes 3 flashes 2 flashes 1 flash
Music streaming time More than 7 h More than 4 h More than 1 h Up to 1 h
- Press and hold the PWR/CALL button for at least 5 seconds. There are two ways to connect the “HBS-250” to a Handset.
� A tone will play, the Bluetooth link will disconnect, and the HBS-250 1. Connecting from a Handset to the HBS-250
will turn off. � From the Bluetooth menu, select the “connect” sub-menu.
� Select “LG HBS-250” and connect.
Easy Pairing 2. Connecting from the HBS-250 to a Handset
� Press the PWR/CALL button for 2 seconds to power on.
- With the HBS-250 off, Press and hold the PWR/CALL button for 2 seconds. � If the “HBS-250” has ever been previously paired with the Bluetooth
� If the HBS-250 has never been connected with a Bluetooth device, device successfully, it will automatically reconnect to that device.
it will automatically enter pairing mode. [ Auto Reconnect ]
�If the HBS-250 has previously been connected with the Handset, - When the HBS-250 is turned off while connected, the headset and
it will automatically try to reconnect to that handset. handset will disconnect. The Stereo headset and handset will
�If the HBS-250 fails to reconnect to the handset, it will automatically automatically reconnect without pairing, when the HBS-250 is turned
enter pairing mode. back on.
�You will hear two short beeps and the LED indicator will shows a solid [ Out of range ]
blue light, when the device enters Pairing Mode. - When the HBS-250 and your handset are separated by a distance of
�Once in Pairing Mode, please follow these instructions: 33 feet (10meters) or more, the HBS-250 and handset will disconnect.
▶ Using your Handset, find the Bluetooth Menu and "search for" or When the handset and HBS-250 are brought back within the required
"add” new devices. distance, the HBS-250 and handset will automatically reconnect.
▶ Select "LG HBS-250" from the list of devices and pair it with your handset.
- If the HBS-250 and handset do not automatically reconnect when
they are back within the required range, briefly press the PWR/CALL
▶ When asked for the Pass/PIN code during the pairing procedure,
button on the HBS-250 to reconnect manually.
please enter “0000” (4 zeros).
▶ After pairing successfully, be sure to “Connect” to the HBS-250. Multi-connection
▶ Once you have connected successfully, you will hear a beep. You can connect your HBS-250 to two devices in order to enable
▶ If you want to pair with other devices in the future, the HBS-250 music playing and phone connectivity at the same time. This implies
must be placed into Pairing Mode. that your mobile phone will be paired with the headset or hands-free
▶ If the HBS-250 is in “Pairing Mode” for 3 minutes without being profile and your Bluetooth-enabled audio device will be paired with
paired to a device, the Headset will automatically turn off. A2DP and AVRCP.
1. Connect your HBS-250 to a Bluetooth-enabled audio device.
Pairing (Manual) 2. Power off the HBS-250 by pressing PWR/CALL button for 5 seconds.
(The connection with the audio device will subsequently drop.)
- Prior to using the Headset for the first time, you must pair it with a 3. Put your HBS-250 in the pairing mode and pair/connect the headset
Bluetooth-enabled handset. to a mobile phone by using the headset or hands-free profile.
- With the HBS-250 off, press and hold the PWR/CALL button for 5 4. Press MUSIC JOG dial once briefly.
seconds. 5. The audio device is now paired with A2DP and AVRCP, while the
�You will hear two short beeps and the LED indicator will shows a mobile phone is paired with the headset or hands-free profile.
solid blue light, when the device enters Pairing Mode. * Note: In case your mobile phone supports A2DP and AVRCP, you can
�Once in Pairing Mode, please follow above instructions. enjoy listening to music from your mobile phone with the HBS-250.
6 7
How to use How to use
Volume control Voice dialing*
- Briefly press the VOLUME UP or VOLUME DOWN button to adjust the - Briefly press the PWR/CALL button. (You will get the best results if you
headset volume. record the voice dialing tag through your HBS-250).
- There are eight levels of headset volume in handsfree mode. NOTE: If the Handset does not support Voice Dialing, the HBS-250 will
- There are fifteen levels of headset volume in audio streaming mode. activate the last number redial.
Audio streaming Last number redialing *
- Press and hold the PWR/CALL button for 1 second to activate Last
PLAY Number Redial.The Headset will beep, and call the last number dialed.
- Briefly press the CALL button to answer an incoming call. Ending a call
PAUSE - Briefly press the PWR/CALL button.
- Briefly press the MUSIC JOG dial to pause the music. Transferring a call*
STOP - While on a call on your handset, briefly press the PWR/CALL button
- Press and hold the MUSIC JOG dial for 1 second to stop the music. on the HBS-250 to transfer the audio to the Headset, (Headset and
NEXT SONG handset must be paired) To transfer a call from the Headset to Handset,
- Briefly turn and release the MUSIC JOG dial toward upper direction to turn and hold MUSIC JOG dial toward upper direction for 1 second.
play the next song. Call waiting*
PREVIOUS SONG - Answer a second call without hanging up the first call by pressing the
- Briefly turn and release the MUSIC JOG dial toward lower direction to PWR/CALL button for 1 second. Press the PWR/CALL button for 1
play the previous song. second to return to the original call.
FAST FORWARD - Briefly press the PWR/CALL button to terminate the active call.
- Turn and hold the MUSIC JOG dial toward upper direction. (or both of calls).
When released, music will resume. Call reject*
REWIND - Activate call reject by pressing the PWR/CALL button for 1 second
- Turn and hold the MUSIC JOG dial toward lower direction. when the Handset/HBS-250 rings.
When released, music will resume. MIC MUTE
Music Enhancement (Music play mode) - Turn and hold MUSIC JOG dial toward lower direction for 1 second to
- The music play mode changes by pressing EQ/HOLD button briefly. mute the mic during conversation. Turn and hold MUSIC JOG dial
- HBS-250 has 5 modes including Normal, Rock, Vocal, Base and 3D. toward lower direction for 1 second again to resume conversation.
- Each mode changes to the next mode by pressing EQ/HOLD button * It is possible to use these functions only when your Handset supports
them. For further information about using these features please
once and when it comes back to the normal, you will hear the beep sound.
consult your Handset's user manual.
Calling
Using as a wired headset
Answering a call
- When there is an incoming call, the HBS-250 will ring. - HBS-250 can be used as a wired headset by connecting the cable provided.
- Briefly press the PWR/CALL button to answer an incoming call. - External sound (from cable) is available even when headset is
Making a call powered-down.
- If you make a call from the Handset, the call will (subject to phone settings) - Yon can not hear external sound when Bluetooth device's sound is
automatically transfer to the HBS-250. If not automatically transferred, active. For example, when the cable is connected to MP3 player and
you can transfer the call manually by briefly pressing the PWR/CALL when you want to listen to the music from the Bluetooth mobile phone,
button on the HBS-250(headset and handset must be paired). the sound from the Bluetooth mobile phone will be only available.
8 9
Summary of button functions LED indication
Limited Warranty
Hearing Safety
Permanent hearing loss may occur if you use your headset at a high
volume.
Set the volume to a safe level. You can adapt over time to a higher
volume of sound that may sound normal but can be damaging to your
hearing. If you experience ringing in your ear or muffled speech, stop
listening and have your hearing checked. The louder the volume, the
less time is required before your hearing could be affected. Hearing
experts suggest that to protect your hearing:
�Limit the amount of time you use headset at high volume.
�Avoid turning up the volume to block out noisy surroundings.
�Turn the volume down if you can't hear people speaking near you.
For information about how to set a maximum volume limit on your
handset, please refer to the features guide for your handset.
16