Documente Academic
Documente Profesional
Documente Cultură
The equipment, as well as the programs that TI has created to use with them,
are tools that can help people better manage the information used in their
business; but tools — including TI products — cannot replace sound judge-
ment nor make the manager's business decisions.
Consequently, TI cannot warrant that its products are suitable for any specific
customer application. The manager must rely on judgement of what is best for
his or her business.
Texas Instruments
P.O. Box 6102, M/S 3255
Temple, Texas 76503
Extensa is a trademark of Texas Instruments. The icons in the Windows Notebook and
Startup groups are copyrighted by Texas Instruments.
IBM and PS/2 are registered trademarks, and OS/2 is a trademark of International
Business Machines Corporation.
Microsoft, Windows and MS-DOS are registered trademarks of Microsoft Corporation..
Intel and Pentium are registered trademarks of Intel Corporation.
Cirrus is a registered trademark of Cirrus Logic, Inc.
Ethernet is a registered trademark of Xerox Corporation.
IRDA is a trademark of Infra Red Data Association.
Sound Blaster is a trademark of Creative Technology, Ltd.
SimulSCAN is a trademark of Cirrus Logic, Inc.
SCSI is a registered trademark of Security Control Systems, Inc.
Synaptics is a registered trademark of Synaptics, Inc.
Phillips is a tegistered trademark of Phillips screw Company.
TranXit is a trademark of Puma Technology, Inc.
Cyrix is a registered trademark of Dakota Systems, Incorporated.
CHIPS is a registered trademark of Chips Technologies, Inc.
AudioRack is a trademark of ESS Technology, Inc.
Preface
Introduction
This manual provides installation, operation and servicing data for the ExtensaTM 900
Series Notebook Computers.
Intended Audience
This manual is primarily intended for use by qualified service technicians but contains
information useful to non-technical users.
Contents
This manual contains six sections and one appendix that are common to all Extensa
900 Series Notebook Computers (differences described as they are covered):
Preface ix
Other Manuals About the System
The following documents provide additional information related to the Extensa
Notebook Computer Series:
x Preface
Contents
Paragraph Page
Preface
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii
Intended Audience- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii
Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii
Other Manuals About the System- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -viii
Ordering Parts and Supplies - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -viii
Section 1 General Description
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1
Product Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1
Video Display Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
Internal LCD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
External CRTs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
Display Hot Key Sequences - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
Keyboard Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4
Software Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4
Standard Peripheral Devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-5
900 Series Connectivity Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-5
Notebook Expansion Capabilities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-7
Memory Expanson - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-7
PCMCIA Card Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-7
Mobile Productivity Base Option - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-7
Docking and Undocking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-10
Mobile Productivity Base Ports - - - - - - - - - - - - - - - - - - - - - - - - - 1-11
Advanced PCI Card Options - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Notebook Battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Standard Test Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Power On Self Test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
PC-Doctor Diagnostics Program- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-13
Extensa 900 Series Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-14
Regulatory Agency Approvals- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-17
Section 2 Installation
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1
Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1
Installing Internal Notebook Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2
Installing Main Memory Expansion (Optional) - - - - - - - - - - - - - - - - - - - - 2-2
Setting Up the Software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3
Installing PCMCIA Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4
Contents iii
Contents (continued)
Paragraph Page
Section 2 Installation (continued)
Installing External Notebook Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5
Installing the Mobile Productivity Base (Option) - - - - - - - - - - - - - - - - - - - 2-5
Docking the Notebook to the MPB - - - - - - - - - - - - - - - - - - - - - - - - 2-5
Cabling to the MPB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6
Installing Ext. Keyboard/Mouse/Numeric Keypad - - - - - - - - - - - - - - - - - 2-8
Installing an External Parallel Printer - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9
Installing an External Serial Port Device - - - - - - - - - - - - - - - - - - - - - - - 2-10
Installing an External VGA Monitor - - - - - - - - - - - - - - - - - - - - - - - - - - 2-11
Primary Battery Pack Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13
Installing the AC Power Adapter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13
Initial Software Load - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-14
Section 3 Operating Instructions
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1
Controls/Indicators - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1
Power On/Off Switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
Notebook LEDs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
LED Icons - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
Keyboard Hot Key Sequences - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Windows 95 Special Keys - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-5
DOS Special Keys - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-5
Configuring the Touchpad- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Using a CD-ROM Drive (MPB Option Only - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Inserting a CD (MPB Option Only) - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Handling CDs (MPB Option Only - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Built-In Sound System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Turning Sound On/Off- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Sound Software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
External Sound Equipment- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-8
Using Remote Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-8
Using the Fast Infrared (FIR) Port- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-8
Using Zoomed Video Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9
MPEG PC Card - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9
Battery Saving Tips - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9
Lowering Inactivity Timeouts- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9
Suspending Operation While Idle - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-10
Responding to a Low Battery Condition- - - - - - - - - - - - - - - - - - - - - - - - 3-10
Replacing the Battery- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-11
Saving to Disk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-11
iv Contents
Contents (continued)
Paragraph Page
Section 4 Theory of Operation
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
Notebook Functional Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
System Processor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
Memory Subsystem- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5
Main Memory- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5
Flash ROM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-6
System Controller Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-6
ALI M1521 (Memory, Cache and DRAM Controller)- - - - - - - - - - - - - 4-8
ALI M1523 (PCA-ISA Bridge)- - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-9
Video Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-12
C&T 65550 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-12
Versatile Panel Support - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-13
Low Power Consumption - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-13
Software Compatibility/Flexibility - - - - - - - - - - - - - - - - - - - - - - - -4-13
Sound Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-13
ESS1878 Audio Controller with Interface to Expansion Audio Mixer -4-13
ES1878 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-14
Keyboard Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-14
I/O Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-14
NS87338VJG Super I/O Controller - - - - - - - - - - - - - - - - - - - - - - -4-14
Hard Disk Drive Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-17
PCI0643 Features- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-17
Floppy Disk Drive Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-18
PCI 1130 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-19
PCMCIA Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-18
Power Subsystem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-20
ALI M6377 Power Management Unit - - - - - - - - - - - - - - - - - - - - - -4-22
AC Power Adapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-25
Mobile Productivity Base Interface - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-25
Section 5 Troubleshooting Procedures
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1
Overview of Fault Isolation Process - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1
Troubleshooting Procedures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Troubleshooting a Power Supply Problem - - - - - - - - - - - - - - - - - - - - - - - 5-3
Troubleshooting a Display Problem - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Fault Isolation Using Power On Self Test- - - - - - - - - - - - - - - - - - - - - - - - 5-4
POST Error Messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-5
POST Beep Error Messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8
Run-Time Error Messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-9
PCMCIA Modem Problems - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5-10
Contents v
Contents (continued)
Paragraph Page
Section 6 Troubleshootig Procedures (continued)
General Fault Isolation Procedures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-12
Fault Isolation Using Diagnostics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-13
PC-Doctor (In DOS Mode or DOS Windows) - - - - - - - - - - - - - - - - - - - - - 5-13
Supporting Online Documentation - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-15
User Interface to PC-Doctor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-15
Quitting PC-Doctor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-15
Section 6 Field Service
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Preventive Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Cleaning the Computer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Handling the Computer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2
Handling the Computer Battery Pack - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2
Password Caution - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3
Required Tools and Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3
Notebook FRUs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3
Cover-Display Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-4
System Base Assembly- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-6
Mobile Productivity Base Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-9
Notebook FRU Replacement Procedures - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-10
Removing/Replacing the Notebook Battery Pack- - - - - - - - - - - - - - - - - - 6-11
Removing/Replacing PCMCIA Options - - - - - - - - - - - - - - - - - - - - - - - - 6-12
Installing/Removing the Mobile Productivity Base- - - - - - - - - - - - - - - - - 6-13
Removing/Replacing the Hard Disk Drive Assembly - - - - - - - - - - - - - - - 6-15
Removing/Replacing the Keyboard Assembly - - - - - - - - - - - - - - - - - - - - 6-16
Heat Sink Assembly Removal/Replacement - - - - - - - - - - - - - - - - - - - - - 6-17
Display Assembly Removal/Replacement - - - - - - - - - - - - - - - - - - - - - - 6-18
Removing/Replacing the LED/Microphone Board Assembly - - - - - - - - - - 6-19
Removing/Replacing the CPU Board- - - - - - - - - - - - - - - - - - - - - - - - - - 6-20
Removing/Replacing the Top Cover - - - - - - - - - - - - - - - - - - - - - - - - - - 6-21
Removing/Replacing the VGA Video Board - - - - - - - - - - - - - - - - - - - - - 6-23
Removing/Replacing the Power Supply Board - - - - - - - - - - - - - - - - - - - 6-24
Removing/Replacing the DC-In Board Assembly- - - - - - - - - - - - - - - - - - 6-25
Removng/Replacing the PC Card Module - - - - - - - - - - - - - - - - - - - - - - 6-26
Removing/Replacing the Main Board Assembly - - - - - - - - - - - - - - - - - - 6-27
Removing Touchpad and Speakers - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-28
Removing/Replacing the Display Bezel - - - - - - - - - - - - - - - - - - - - - - - - 6-29
Removing/Replacing the LCD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-30
Removing/Replacing the Display Inverter Boards - - - - - - - - - - - - - - - - - 6-31
Removing/Repalcing MPB FRUs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-32
Removing/Replacing the Media Bay Device - - - - - - - - - - - - - - - - - - - - - 6-32
vi Contents
Contents (continued)
Paragraph Page
Section 6 Field Service (continued)
Removing/Replacing the MPB Battery - - - - - - - - - - - - - - - - - - - - - - - - -6-33
Removing/Replacing the MPB Housing- - - - - - - - - - - - - - - - - - - - - - - - -6-34
Removing/Replacing the Docking Cable - - - - - - - - - - - - - - - - - - - - - - - -6-35
Removing/Replacing the Docking Mechanism - - - - - - - - - - - - - - - - - - - -6-36
Removing/Replacing the MPB DC-DC Converter - - - - - - - - - - - - - - - - - -6-37
Removing/Replacing the MPB Main Board Assembly - - - - - - - - - - - - - - -6-38
Appendix A Notebook Schematic Diagrams
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A-1
Appendix B Notebook Schematic Diagrams
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - B-1
Appendix A POST BIOS
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - C-1
Contents vii
1
General Description
1.1 Introduction
This manual contains field and factory level servicing information for the ExtensaTM 900
Series Notebook Computers (Figure 1-1) marketed by Texas Instruments. This section
provides a general overview of the Extensa 900 Series, describes the standard and
optional features, and identifies the major assemblies and subassemblies. This section
also contains detailed functional and environmental specifications for the Extensa 900
Series Notebook Computers.
♦ 133 MHz Pentium processor with internal 256 KB cache memory and math
coprocessor
♦ Small, lightweight AC adapter, auto-switching (90 VAC to 264 VAC, 50-60 Hz)
♦ Portable power system with advanced power savings features for extra long
battery life
- Zero-Volt Suspend, 5-Volt Suspend and Standby power saving modes
- Rechargeable Li-Ion battery pack
Power
Switch Right
Status Speaker
Indicators
Right
Battery
Lock
FIR
Port
Left Battery
Audio and Touchpad
Speaker Pack Bottom of Unit
Mic Jacks
HDD
Left Access
Battery Cover
Lock
VGA
Port
Expansion
Serial Memory
PC Port Acess
Card Parallel Cover
Slots Port
PS/2 AC Adapter
Port Connection
When the notebook is set to the SimulSCAN mode, a minimum resolution of 800 x 600
x 256 colors is supported. When operating in the External CRT Mode, resolutions up
to 1280 x 1024 x 256 colors are supported.
♦ Fn-Up Arrow and Fn-Down Arrow - Control LCD screen brightness (higher
brightness setting uses more battery energy)
Note: In addition to the hot keys that control the notebook display functions,
there are several other hot key functions that control other notebook functions
such as turning the Touchpad on/off, etc. For these sequences, refer to
Section 3.
Windows/DOS 6.22 This environment has some limitations in the Plug N Play area; includes TI utilities and various
device drivers including Cirrus CL-GD7548, ESS 1888 Sound Device Drivers, WinModem Device
Drivers, PC-Card Bus Socket Services and Card Services Device Drivers, etc.
VGA
Port
Serial
Port
Parallel
Port
PS/2 AC Adapter
Port Connection
FIR
Port
Line Mic
Out Line In
In
Serial Port 9-pin Male connector used to attach an RS-232 serial device to the notebook.
Parallel Port 25-pin Female connector used to attach a bidirectional printer or an external
floppy disk drive (requires special cable for use with floppy disk drive).
PS/2 Port 6-pin Circular connectors used to attach external keyboard/mouse devices to
the notebook.
AC Adapter Connector Power in connector used to attach the output of the AC adapter to the
notebook.
Fast Infrared Port Fast Infrared Port (4 M/b) used for wireless communications between the
notebook and an FIR-equipped device such as keyboard, another notebook,
printer, etc.
Audio In/Out, Mic In Jacks Stereo audio line inputs, stereo line outputs and external microphone input
MPB Bus PCI Bus plus sidebands that support an optional Mobile Productivity Base.
Memory Expansion Features Main memory can be expanded from 16 MB to a maximum of 80 MB using
one soDIMM module (8 MB, 16 MB, 32 MB, or 64 MB configurations).
Flash ROM (hardware feature) Permits new versions of BIOS to be downloaded into Flash ROM without
physically having to replace the ROMs
PCMCIA Slots Allows installation of any optional PCMCIA device such as speakerphone
modems, Ethernet® cards, and full motion video cards.
Mobile Productivity Base Ready Connectors and latch mechanisms to accept a Mobile Productivity Base
(provides desktop connectivity with quick removal/installation feature required
for combination desktop and portable environments and increased functionality
including media bay and Advanced PCI Card support).
Expansion Memory
Access Cover
Media Bay 3.5-inch Diskette Drive Module Provides convenient storage on a removable disk format
Advanced PCI Slot Provisions for installing one Advanced PCI Card
Audio Jacks
Advanced
PCI Option Slot
Media Bay
(Floppy or
CD-ROM Drive)
Left Side
Right
Side
Line
In
Line
Out
PS/2
Keyboard Advanced
Port PCI
VGA
PS/2 Serial Port
Mouse Port
Port Parallel
Port
Features of the diagnostic program are accessed through a series of pull-down menus
and basic keyboard keys (cursor keys to move highlighted pointer, Enter key to select
a highlighted feature, Esc key to cancel a function and move back one level.
A powerful set of utilities within PC-Doctor (that can be run locally or remotely) simplify
the task of determining system configuration data, allocating and using system memory,
IRQ and DMA use, what device drivers are installed, what COM and LPT ports are
assigned and what ports are available, identifying partitioning data for fixed disk
drive(s), determining the VGA setup information, reading the software interrupts/
interrupt vectors, etc.
DRAM Memory
Size 16 MB DRAM, 60-ns, page-interleaved
80 MB
Maximum Expansion Size
FDD External
Built-in Mouse Device Touchpad built-in to the base of the keyboard (select buttons on sides
of Touchpad)
Video Subsystem
Emulations: SVGA
Bits per second: 110, 200, 300, 600, 1200, 2400, 4800, 9600, 19200
♦ Removing the computer and all manuals, options and accessories from the
shipping container(s)
1. Carefully cut the tape that seals the top flap of the shipping carton.
2. Remove the computer and the accessories carton from the main shipping
carton.
3. Remove all protective coverings from the computer.
4. Open the accessory box; remove the contents.
Note: Save the two shipping containers and packaging for later reuse.
Installation 2-1
2.3 Installing Internal Notebook Options
If you have no internal options to install at this time, skip to Paragraph 2.4. Otherwise,
continue with Paragraph 2.3.1.
Caution: The EDO soDIMM module option contains components that are
sensitive to static electricity. When handling the module and the internal
parts of the computer, protect against static electricity by using wrist or
ankle grounding straps and grounded working mats. When moving or
storing items, use the anti-static bags supplied with the items.
1. Ensure that the notebook is powered off and the AC adapter disconnected
from the AC outlet. Also, ensure that all batteries are out of the unit.
2. Disconnect any peripheral device interface cables from the external interface
connectors and remove any installed PCMCIA options.
3. Turn the notebook over and locate the Expansion Memory Access Cover on
the bottom of the notebook.
4. Remove the screw holding the Expansion Memory Access Cover and remove
the cover.
5. Remove the EDO soDIMM module from its shipping container.
6. Refer to Figure 2-1. To install an soDIMM module, first align the connector
edge of the memory module with the key in the connector. Insert the edge of
the memory module board into the connector using a rocking motion to fully
insert the module. Push downward on each side of the memory module until
it snaps in place.
7. Reinstall the Expansion Memory Access Cover using the screw removed in
Step 4.
8. Replace the batteries and AC adapter.
9. Power up the notebook. If all of the installed memory is not recognized, try
reseating the soDIMM module and rebooting.
2-2 Installation
Expansion
Memory
Access
Cover
Inserting
soDIMM
Memory
Module
Note: After installing expansion memory in your notebook, you must run the
PHDISK utility in order for the Save-To-Disk or 0V Suspend functions to operate
correctly.
Note: If you are using an operating system other than Windows 95, Windows for
Workgroups, or DOS, you may need to re-partition your hard disk drive to allow
for the additional memory. Check with your system administrator.
Installation 2-3
In Windows 95
Follow these steps if your computer is running Windows 95.
1. Review the installation instructions supplied with the PCMCIA option card(s).
2. Hold the card at the end opposite the connector pins with the label side up.
Insert the card into an unused slot on the left side of the Notebook.
3. If the option requires external cabling (e.g., modem option), connect external
cabling at this time.
Note: After installation of a PCMCIA option card, Windows 95 displays the New
Hardware Found dialog box to help you configure the new device. To remove a
card, click on the PCMCIA icon; then, press the appropriate PC Card Release
lever (or press both levers for a Type III device) and remove the option.
2-4 Installation
Figure 2-2 Installing PCMCIA Option Cards
Note: When installing a Zoomed Video option card, the card must be installed in
the lower card slot (slot 0 or A). Other option cards can be installed in either card
slot.
1. Turn the notebook over and open the expansion door (slide the door toward
the center of the notebook) to expose the docking connector.
2. Slide the lever release latch to the front of the MPB to release the docking
lever (refer to Figure 2-3).
Installation 2-5
3. Swing the Docking Lever outward a full 90 degrees from the side of the MPB.
4. Slide the notebook into the MPB, right side first, as shown in Figure 2-3.
Ensure that the docking guides on both the notebook and the MPB are
securely hooked.
5. Rest the notebook on the MPB. Then press and hold the notebook against
the MPB and swing the Docking Latch inward until the Lever Release Latch
locks.
2-6 Installation
Mic
In
Line
In
Line
Out
PS/2
Keyboard Advanced
Port PCI
VGA
PS/2 Serial Port
Mouse Port
Port Parallel
Port
Installation 2-7
Battery Pack
Note: Refer to Figure 2-4 for port assignments if using the MPB option.
2-8 Installation
Figure 2-6 PS/2 Port Connections
Note: Refer to Figure 2-4 for port assignments if using the MPB option.
Installation 2-9
PARALLEL PORT PINOUTS
1 Strobe* STB*
2 Data Bit 0 PD0
3 Data Bit 1 PD1
4 Data Bit 2 PD2
5 Data Bit 3 PD3
6 Data Bit 4 PD4
7 Data Bit 5 PD5
8 Data Bit 6 PD6
9 Data Bit 7 PD7
10 Acknowledge* ACK*
11 Busy BUSY
12 Paper Out PE
13 Select SLCT
Auto Line Feed* AFD*
14
Error* ERR*
15
16 Initialize Printer* INIT*
17 Select In* SLIN*
18 LPT 18 LPT18
19 VCC VCC
20 PLP120 PLP120
PLP121 PLP121
21
PLP122 PLP122
22 FDD 5V FDD 5V
23 FDD 5V FDD 5V
24
LP125 LP125
25
26 Ground Ground
Note: * Denotes
Active Low
♦ External Modem
♦ Serial Mouse
♦ Serial Printer
2-10 Installation
♦ Any device that uses an RS-232 interface
Note: Refer to Figure 2-4 for port assignments if using the MPB option.
Note: Refer to Figure 2-4 for port assignments if using the MPB option.
Installation 2-11
Figure 2-9 External VGA Pinouts
2-12 Installation
Windows for Workgroups, use the WinMode Utility).
5. Install the correct driver, if required (refer to the Monitor Installation
Instructions supplied by the CRT vendor).
Remove Battery
from Front of Notebook
Flush
If Battery Lock comes off,
reinstall as shown
Slide
Caution: Use only the AC adapter supplied with the computer; other
adapters can damage the unit.
Installation 2-13
1. Remove the AC adapter from the packaging. Connect the round coaxial
connector supplied with the notebook to the DC IN power receptacle on the
left rear of the notebook as shown in Figure 2-9.
2. Connect the female side of the AC power cord to the AC adapter and connect
the male end to a grounded AC outlet.
DC-IN Connector
AC Adapter
Because of the way Windows 95 structures its files, stopping in the middle of the setup
process can cause irreversible file damage.
2-14 Installation
Before starting the initial software load process, ensure that you have the following:
♦ Certificate of Authenticity - You will need to enter the number from your
Windows 95 Certificate of Authenticity during Windows 95 Setup. This
certificate is part of the Windows 95 documentation kit. You need this number
even if you are installing Windows for Workgroups.
2-15 Installation
3
Operating Instructions
3.1 Introduction
This section contains a summary of notebook operating procedures useful for
maintenance operations. For additional detail, refer to the Extensa 900 Series Notebook
Computer User’s Guide supplied with the notebook.
3.2 Controls/Indicators
The operating controls and indicators for the 900 Series Notebooks are shown in Figure
3-1 and briefly described in the following paragraphs.
Disk Media
Battery Charging
Standby Mode
Pwr/Batt Low
Caps Lock
Num Lock
Power
Switch
Icon Description
Icon Description
Power/Battery-low Indicator
Lights when the computer is on and there is power to the computer.
Flashes when the battery power is low. Connect a powered AC
adapter to the computer as soon as possible.
Sets the notebook to echo keystrokes to the printer; prints a line when Ctrl+P
you press Enter; continues until you press Ctrl+P
0V Suspend Ctrl+Alt+F2
5V Suspend Ctrl+Alt+F3
Pressing the Application Key displays the context menu for an application. This is the
same as clicking the secondary (right) mouse button.
Please refer to your Windows 95 manual for more information on these Windows 95-
specific keys and their functions.
In Windows 95
1. Select the Start button, then select Settings.
2. Select Control Panel to display the Control Panel window.
3. Double-click on the Synaptics Touchpad icon.
4. Select the touchpad tab to customize the touchpad to your preference.
5. Click on Enhancements to bring up additional features and to get to the
online help for the Synaptics Touchpad drivers.
♦ When removing a CD from its protective case or loading a CD into a drive, hold
the CD by its central hole and outer edge. Never touch the data surface (non-
label side).
♦ Clean a CD with a clean, dry, lint-free cloth. Always wipe from the center to
the edge. Don’t wipe the CD in a clockwise or counterclockwise direction.
♦ AudioRack™32
♦ Audio Recorder
The computer has the following jacks for connecting to external sound equipment:
♦ Microphone Input
♦ Stereo Headphone/Speaker Line Output
♦ Stereo Line Input
The Extensa communicates with the outside world in one of the following ways:
Note: You can purchase compatible modems and network adapters from your
dealer or directly from Texas Instruments.
Align the FIR ports of the two devices making sure that the distance separating them
is between six inches and three feet (one meter).
After the devices are aligned, use the TranXit™ software, located in the TranXit group,
to complete the communication process. (For further information, refer to the online
TranXit Quick Reference Guide.)
♦ Caching the hard disk drive -— By caching the hard disk drive, you can reduce
the length of time the hard disk drive is rotating and using energy. Both
Windows 95 and Windows for Workgroups use a disk-caching program by
default. As long as you have not disabled these programs, you can take
advantage of the battery savings.
♦ Pressing the Shift key resumes activity after the notebook has been in either
the Suspend or Standby modes.
♦ Saving files — Save all open files frequently while the computer is in a
low-battery condition.
♦ Turning off the alarm — Turn off the audible alarm by pressing Fn+End
(Mute).
♦ If you cannot insert the spare battery, suspend operations to disk by pressing
Fn+F2 and replace the battery. When you turn on the computer, the computer
returns to the saved state.
♦ Video Subsystem — implemented on the Main Board and LCD Display Panel
assemblies
♦ Hard Disk Drive Subsystem — implemented on the Main Board Assembly and
the Hard Disk Drive Assembly
♦ Floppy Disk Drive Subsystem — implemented on the Main Board Board and
Floppy Disk Drive Assembly
♦ Power Subsystem — implemented on the Main Board, the battery pack, and
the AC adapter
CPU Bus
DRAM
SRAM M1521 MPB
BGA Graphic
controller
PCI Bus
IDE Master
M1523
CD HDD
ISA Bus
The Processor also interacts with other hardware logic to provide the power savings
features for the notebook. These features include controlling CPU clock speeds,
reducing clock speeds whenever possible, e.g., when performing floppy disk drive
accesses, powering down unused devices, etc. A detailed block diagram of the Extensa
900 Series Notebook is shown in Figure 4-2.
The IRQ assignments for the 900 Series Notebooks is provided in Table 4-1.
$CPU_A(17:3) AD(31:0)
16MB AD(31:0) Y(7:0)
DIMM*1
PCI BUS HOST BUS RAM UV(7:0)
VIDEO
RAM
ISA BUS
CD-ROM
SA(11:0) SA2 SD(15:0) SA(9:0)
SD(15:0) SA(9:0) SD(15:0)
SD(15:0)
RDATA#,WDATA#
FDD
ESS1878S M38813 M6377 87338
MEDIA BAY
♦ Main memory
♦ L2 Secondary Memory (cache)
♦ Flash ROM
The Extensa Series uses fast Extended Data Out (EDO) DRAM for main and video
memory and high-speed synchronous, pipelined burst SRAM for L2 cache memory.
Main BIOS and Video BIOS are stored in Flash ROM.
The Extensa 900 Series Memory Address Map is shown in Table 4-2.
The Flash ROM execution is 8 bits wide. However, better performance can be attained
by enabling the Shadow ROM in the CMOS setup routine or by selecting the Windows
Control Panel Applet. When the Shadow ROM is enabled, BIOS is copied into a 32-bit,
high-speed system.
The notebook utilizes the BGA package to improve the AC characterization, resolves
system bottleneck and make the system manufacturing easier. The system architecture
includes the UMA, ECC, PBSRAM, SDRAM/BEDO, and multi-bus with highly efficient,
deep FIFO between the buses, such as the HOST/PCI/ISA dedicated IDE bus.
The I/O Address Map for the 900 Series Notebook is provided in Table 4-4.
The chip has two extra IRQ lines and one programmable chip select for motherboard
Plug-and-Play functions. The interrupt lines can be routed to any of the available ISA
interrupts.
The on-chip IDE controller supports two IDE connectors for up to four IDE devices
providing an interface for IDE hard disks and CD-ROMs. The ATA bus pins are dedicated
to improve the performance of IDE master.
The M1523 supports the Super Green feature for Intel and Intel compatible CPUs. It
implements programmable hardware events, software event and external switches (for
suspend/turbo/ring-in). The M1523 provides CPU clock control (STPCLKJ). The
STPCLKJ can be active (low) or inactive (high) in turn by throttling control.
♦ 32-bit posted-write buffer for PCI memory write and I/O data write (for sound
card) to ISA bus
♦ 32-bit addressability
♦ Provides compatible DMA transfers
♦ Keyboard controller
♦ Built-in PS2/AT keyboard controller
♦ The specific I/O is used to save the external TTL buffer
♦ Real time clock
♦ Built-in real time clock
♦ 128-byte CMOS RAM with 2
♦ Plug-and-Play port support
♦ Programmable chip select
♦ Steerable interrupt request lines
♦ PMU interface
♦ Supports CPU SMM mode, SMI feature
♦ Supports programmable stop clock throttle
♦ Supports the APM control
♦ Provides external suspend mode switch/turbo switch/ring-in switch
♦ Provides four system states for power saving (on, doze, standby, suspend)
♦ Provides three timers from 1 second to 300 minutes to individually monitor
VGA, MODE, IN status
The notebook contains a built-in LCD and features simultaneous LCD and external
VGA display.
The video subsystem includes a 1.5 MB DRAM memory, 32-bit DRAM bus, and separate
display and memory clocks. An additional frame buffer/accelerator DRAM increases
the available memory band width for CPU accesses. The video section also uses
additional levels of write FIFOs, a read cache, page mode DRAM.
Control of the video subsystem is provided by the C&T 65550 High Performance Flat
Panel/CRT VGA Controller chip. The C&T65550 multimedia flat panel/CRT GUI
accelerators provide 64-bit high performance and new hardware multimedia support
features as described in the following paragraphs.
The capture system can receive data from either the system bus or from the ZV enabled
video port in either RGB or YUV format. The input data can also scaled down before
storage in display memory (e.g., from any size larger than 320 x 240 down to
352 x 248). Capture of input data may also be double-buffered for smoothing and to
prevent image tearing.
The display system can independently place either RGB or YUV data from anywhere in
display memory into an on-screen window which can be any size and located at any
The sound subsystem also includes a variety of sound utilities that combine to provide
additional multi-media functions.
♦ IIS interface to intemal stereo D/A for external ZV port or MPEG audio
♦ Completely general interrupt mapping, including sharing all interrupts
♦ Keyboard Assembly
♦ Keyboard Scanner
♦ Status LED Interface
The PC87338 FDC uses a high performance digital data separator eliminating the need
for any external filter components. It is fully compatible with the PC8477 and
incorporates a superset of DP8473, NEC PD765 and N82077 floppy disk controller
The two UARTs are fully NS16450 and NS16550 compatible. Both ports support MIDI
baud rates and one port also supports IrDA 1.0 SIR (with data rate of 115.2 Kbps), IrDA
1.1 MIR and FIR (with data rate of 1.152 Mbps and 4.0 Mbps respectively), and Sharp
SIR (with data rate of 38.4 Kbps respectively) compliant signaling protocol.
The parallel port is fully IEEE 1284 level 2 compatible. The SPP (Standard Parallel Port)
is fully compatible with ISA and EISA parallel ports. In addition to the SPP, EPP
(Enhanced Parallel Port) and ECP (Extended Capabilities Port) modes are supported by
the parallel port.
A set of configuration registers are provided to control the Plug and Play and other
various functions of the PC87338. These registers are accessed using two 8-bit wide
index and data registers. The ISA I/O address of the register pair can be relocated using
a power-up strapping option and the software configuration after power-up.
When idle, advanced power management features allows the PC87338 to enter
extremely low power modes under software control. The PC87338 operates at a 3.3/5V
power supply.
♦ Supports fast 2 Mbps and standard 1 Mbps/500 kbps/250 kbps tape drives
♦ Bidirectional Parallel Port
♦ Enhanced Parallel Port (EPP) compatible
♦ UARTs
♦ Software compatible with the PC16550A and PC16450
♦ MIDI baud rate support
♦ Infrared support on UART2 (IrDA 1.0 SIR, IrDA 1.1 MIR and FIR, and Sharp SIR)
♦ Address Decoder
♦ 6 bit or 10 bit decoding
♦ External Chip Select capability when 10 bit decoding
♦ Full relocation capability (no limitation)
♦ Enhanced Power Management
♦ Special configuration registers for power-down
♦ Enhanced programmable power-down FDC command
♦ Auto power-down and wake-up modes
♦ 2 special pins for power management
♦ Typical current consumption during power-down is less than 10 µA
♦ Reduced pin leakage current
♦ Voltage support
♦ 3.3/5V operation
♦ General Purpose Pins
♦ 1 pin, for 2 separate programmable chip select decoders, can be programmed
for game port control
The notebook is equipped with a high-capacity hard disk drive. The hard disk drive also
features built-in power conservation features configured from the standard CMOS
Setup Routine. An Automatic Power Down mode can be selected which powers down
the drive motor during periods of inactivity. An additional level of power conservation
may also be selected which powers down the motor plus all control circuits.
The hard disk drives are factory formatted as a single drive (Drive C:) and are preloaded
with installation versions of Windows 95 or Windows for Workgroups (in dual load
versions, the user selects operating system during software installation).
The Hard Disk Controller is implemented with the PCIO643 Controller Chip described
in greater detail in the following paragraph.
♦ Supports Windows 95, Windows NT 3.1 and 3.5 (Daytona), and OS/2™
♦ Fully supports all ATAPI-compatible devices, including CD-ROM, tape, MO, and
other devices
The data transfer rate for the floppy disk drive is 500 Kbits per second for high-density
disks and 250 Kbits per second for double-density disks.
The floppy drive controller is implemented on the PC87338 Super I/O Controller chip
described in the previous paragraphs.
The PCI 1130 is compliant with the PCI local bus specification revision 2.1, and its PCI
interface can act as either a PCI master device or a PCI slave device. The PCI bus
mastering is initiated during 16-bit PC Card DMA transfers or CardBus PC Card bus
mastering cycles.
All card signals are internally buffered to allow hot insertion and removal without
external buffering. The PCI 1130 internal data path logic allows the host to access
♦ Multifunction PCI device with separate five PCI Memory Windows and two I/O
Windows available to each PC Card 16 socket
♦ Two l/O Windows and two memory windows available to each CardBus socket
♦ CardBus Memory Windows can be individually selected prefetchable or non-
PREFETCHABLE
The control for the power subsystem is implemented with the ALI M6377 Power
Management Unit chip as described below.
UMA
DCBATOUT
AD+ AD+
CHARGER DC/DC CONVERTER M+12V
CHARGER
BAT+
M+2.9V
BAT+
M+5V M+7V
SW
LCD M+3.3V
SW
SW SW SW
M+5V
CD/DC2
M 6375 SW +2.9V AUDIO_VDD
+12V
+12V +5V
+3.3V
9088MAL CPU ES1878S
M+3.3V +3.3V
M 38813
SW
+3.3V ADVANCED
PCI CARD
65550/S3 VGA_VDD
+5V
M 1521 FLASH
M+5V L2 CACHE
ROM
PCI0643
VRAM +3.3V
+5V
M+5V M 1523 HDD +5V CD_5V
8MB
HDD/ SW
DRAM /
+5V CD
DIMM *1
PCI1130 PCI0643 87338
RESUME
GLUE FDD
LOGIC M+5V M+5V
SW
M AX213
Port definitions for the M6377 Chip are provided in Table 4-5.
Item Description
GPIO17 1: Connect serial BUS with charger ROM.
(W/R) 0: Disconnect serial BUS with charger ROM.
GPIO20 is the CLK and GPIO21 is the DATA for the serial BUS.
GPIO16 Reserved
GPIO15 1: CPU high temperature SMI is allowed.
(W/R) 0: CPU low temperature SMI is allowed.
GPIO14 1: Connect the ZV BUS with PCMCIA card.
(W/R) 0: Connect the ZV BUS with Feature board.
GPIO13 1: Force the system to enter 0V suspend or power down mode, and then could press power
(W) button to turn on system again.
0: Normal
GPIO12 1: Force FAN on
(W/R) 0: Normally
GPIO11 1: Enable+12V power foor FLASH ROM.
(W/R) 0: Disable+12V power.
GPIO10 1: Disable FIR VCC.
(W/R) 0: Enable FIR VCC.
GPIO27 1: CPU high temperature.
(R) 0: CPU low temperature.
GPIO26 1: notebook’s SMBUS is accessible.
(W/R) 0: MPB’s SMBUS is accessible.
GPIO25 1: Brightness level is fixed
(W/R) 0: Brightness is trimable via GPIO22 & GPIO20.
The current brightness level is stored when PIO25 low to high transations.
GPIO24 For DSTN LCD only.
(W/R) 1: Contrast level is fixed.
0: Contrast is trimable via GPIO22 & GPIO20.
The current brightness level is stored when PIO25 low to high transations.
GPIO23 1: Normally
0: Ready to transations.
GPIO22 The Brightness & Contrast for LCD system is devided into 32 scale by programing GPIO22 &
(W/R) GPIO20.
1: Brightness is incremented with GPIO23 “L” and GPIO20 high to low transations.
Contrast is incremented with GPIO24 :L” and GPIO20 high to low transations.
0: Brightness is decremented with GPIO24 “L” and GPIO20 high to low transations.
Contrast is decremented with GPIO23 “L” and GPIO20 high to low transations.
GPIO21 The system provide a serial BUS while wired to Inverter ROM, notebook’s Charger ROM, MPB’s
(W/R) Charger ROM and Uma’s dock ROM.
GPIO21 is the serial DAT and GPIO20 is the serial CLK.
Item Description
GPIO20 GPIO20 is the common CLK for below serial BUS:
(W/R) A. For Charger ROM, Inverter ROM, MPB ROM serial BUS.
B. For Brightness & Contrast control.
C. For Feature board.
GPIO37 GPIO37 is serial DATA for Feature board serial BUS, and GPIO20 is the serial CLK.
(W/R)
GPIO36 1: Normally
(W/R) 0: Disable MPB power.
GPIO35 The system use 3-wire BUS to communicate with thermal sensor (DS1620). These functions are
GPIO34 shown as below:
GPIO33 GPIO35 1: Enable DS1620.
(W/R) 0: Disable DS1620.
GPIO34 is CLK for 3-wire BUS .
GPIO33 is DATA, must be valid during the rising edge of CLK(GPIO34).
GPIO32 1: Normally
(W/R) 0: System into STANDBY mode.
GPIO31 1: Enable 1394 power.
(W/R) 0: Disable 1394 power.
GPIO30 1: Go to 5V suspend.
(W/R) 0: Normally
SE12 1: Normally
(W) 0: Disable notebook’s OP amplify.
SE11(W) Reserved
SE10(W)
GPIO7 1: Media bay switch is unlocked.
0: Media bay switch is locked.
GPIO6 1: MPB is connected.
0: MPB is disconnected.
GPIO5 received
GPIO2 1: No FDD connected.
0: FDD connected.
GPIO1 0: No 2nd channel IDE device connected
1: 2nd channel IDE device connected.
GPI00 1: Parallel port connected with FDD while the parallel port SMI occured.
0: Parallel port connect with printer.
♦ Input Frequency: 50 to 60 Hz
Notebook MPB
ZV
65550/S3 SW
ZV
M1521
M1523 SW PCI
PCI Advanced
PCI1130
PCI0643 PCI Card
DPCIRST#
PCICLK1 PCI0643
M6377 CLOCK
GEN. PCICLK2
HDD/
IDE CD/MO
RDATA#, SW
WDATA# SW
FDD
87338
♦ Checking the Notebook power system (including battery packs and AC adapter
connections) - refer to Paragraph 5.4.
♦ Undocking from the Mobile Productivity Base (if installed) and running
diagnostics to isolate problem to either the base or the notebook.
START
COMPUTER NO MPB NO
TROUBLE TROUBLE
INDICATION INDICATION
? ?
NO See Paragraph
Press Power button; 5.4
Selftest automatically RUN
SELF TEST
runs when power turned on.
ERROR YES
MESSAGE See Paragraphs
? 5.3.3.1 and 5.3.3.2
NO
MODEM YES
See Paragraph
PROBLEM 5.3.5
?
NO
RUN
DIAGNOSTICS
YES
DIAGNOSTICS See Paragraph
ERROR MSG 5.5
?
NO
♦ Measure the voltage at the AC outlet or plug in a known good appliance (e.g.,
a lamp) to verify that voltage is present. If the voltage is okay, try replacing the
AC adapter.
♦ Check to see that a charged battery pack is installed correctly; also attach the
AC adapter and connect to live wall outlet. If the AC outlet voltage, AC adapter,
and battery packs test normal but the computer will not power up, try the DC-
In PWB, Power Supply PWB, Main Board PWB or LED PWB.
♦ Low battery - Use a fully charged battery and/or plug in the AC adapter.
Sections of the display are missing Low Medium Medium Low Low
characters
Display goes dim over time High Medium Low Low Low
Dim display but characters very Medium Medium Low Low Low
visible
Very dark display and characters are High Low Low Low Low
slightly visible when a light is directed
at surface of the display
Very dark display and no characters Low High High Medium Low
are visible
Note: In the event of a hardware problem that affects the display, the Notebook
also communicates errors via a series of beeps. The interpretation of the beep
codes is provided in Table 5-3.
To recover from a self test error, try cycling power to the computer. Also, press
Ctrl-Alt-Esc to ensure that the Setup configuration is correct. In general, most of the
Try running PC-Doctor (Paragraph 5.5) if possible to verify the source of problem.
System Failures
♦ Dialing problem or wrong number - Try dialing a number that you have
previously dialed successfully.
♦ Faulty phone line - Connect a telephone to the line and listen for a dial tone.
♦ Software program - Check to ensure that you have installed the software
correctly.
Table 5-5 contains a summary of general problems that may occur during operation of
the notebook and the appropriate corrective actions that should be taken for each. For
other symptoms, go on to Paragraph 5.5 and troubleshoot the notebook using PC Doctor
Diagnostics.
LCD screen does not show data 1. Check the LCD Status Bar if Suspend mode is
activated. Press any key or press the power
button to resume operation and display.
2. Check if LCD cables are disconnected or loose.
3. Check if the display output is switched to the
external monitor.
4. Verify that the Contrast level is set to minimum.
5. Check if there is power.
6. Replace the LCD Inverter board found inside the
LCD Panel.
Battery Power does not last 1. Make sure that the power management features
are enabled.
2. Recharge the battery pack for 1.5 hours before
using again.
3. Replace the battery pack.
System halts during boot sequence 1. Check condition of selected bootload device (disk
or hard disk) for bad boot track or incorrect OS
files.
2. Try booting from a new bootable disk and recopy
or repartition hard disk drive.
3. Check for any BIOS error messages on the
display screen.
4. Replace motherboard.
I/O processing malfunctions 1. Check the connections of all internal devices.
2. Replace motherboard.
Diskette drive does not work 1. Check if floppy disk drive cable is connected
properly.
2. Check disk type if correct and not faulty.
3. Replace disk drive.
4. Replace motherboard.
Hard disk drive malfunction 1. Check if hard disk drive is set properly on CMOS
Setup.
2. Check drive cables and connections.
3. Check if hard disk drive is good.
4. Replace the motherboard.
PC-Doctor is typically user friendly but if you don't understand a feature, context-
sensitive "help" information is available at any time by pressing the F1 function key;
pressing the F1 function key twice accesses the online Technical Reference Manual for
PC-Doctor.
A powerful set of utilities within PC-Doctor (that can be run locally or remotely) simplify
the task of determining system configuration data, allocating and using system memory,
IRQ and DMA use, what device drivers are installed, what COM and LPT ports are
assigned and what ports are available, identifying partitioning data for fixed disk
drive(s), determining the VGA setup information, reading the software interrupts/
interrupt vectors, etc.
♦ Group of Interactive tests (require operator input) for testing the keyboard, video
sections, sound subsystem, mouse, joystick, disk drive, printer subsystem and
the SCSI/CD-ROM Drive subsystems supported by the docking station options.
Note: For additional information, access the Online Reference Manual for
PC-Doctor.
The second part of the section identifies all field-replaceable parts; the remainder of the
section contains removal and replacement procedures for the field-replaceable parts.
Caution: Never spray any liquids directly on the computer case, keyboard,
or screen. If the liquid-crystal display (LCD) screen has become smeared
or dusty, clean the screen first with a soft, clean, lint-free cloth and gently
wipe the glass. If the glass is still smeared, use distilled water or a 25%
solution of alcohol and distilled water.
Caution: Do not use paper towels to clean the display screen. Paper can
scratch the display screen matte.
♦ Never move the computer while the hard drive is rotating (press the Suspend
button to put the computer in a Sleep mode before closing cover).
♦ Never expose the computer hard disk drive(s) or disks to strong magnetic fields
such as those generated by transformers, speakers, or telephone handsets.
To ensure that the battery packs endure normal life cycle, always observe the following
precautions when handling the battery packs:
♦ Do not drop the battery pack or subject it to excessive shock and vibration.
♦ Do not expose the battery pack to direct sunlight, moisture, or chemical
compounds.
♦ Always charge the battery pack as soon as possible after a low battery
indication.
♦ Tweezers
♦ Plastic Stick
♦ Small flat-blade screwdriver
♦ Small Phillips® screwdriver
♦ 5 mm Nut Driver
Caution: All boards, options and peripherals contain components that are
sensitive to static electricity. When handling any of these items, protect
against static electricity by using wrist grounding straps and grounded
working mats. When moving or storing items, use the anti-static bags
supplied with the items.
♦ Notebook Assembly
- Cover-Display Assembly
- Base Assembly
Base Assembly
Mobile Productivity
Base Assembly
DC-AC Inverter
Board Assembly
(large PWB)
CN2
LCD
Assembly
Latch Securing
Inverter Boards
LCD Inverter
Board (smaller
PWB)
LCD Microphone
Keyboard
Assembly
Speaker
Battery
Heatsink
Speaker PC Card
Assembly
Module
Power Supply
Board
Main Board
Battery Connector
Cable Assembly
LED Board
PWB ASSY, MAIN BOARD W/O CPU, EXT. 90X 6.5.15 9813651-0001
Keyboards
Peripherals/Cables
SPRING, EXT. SWP, EXT 900' SPG EXT SWP 0.2*2.0*17 Ref 9813665-0001
DC-DC Converter
Main Board
Assembly
Dock
Mechanism MPB with Upper Cover
Removed
♦ Locking-type connectors - Use a plastic stick to unlock and lock these type of
connectors as shown in Figure 6-5.
♦ Non-locking connectors
1. Turn off the computer and disconnect the AC adapter from the computer.
2. Unlock the battery on each side of the notebook and pull the battery out of
the front of the notebook as shown in Figure 6-6.
3. Replacement is essentially the reverse of Steps 1 and 2 (connector side of
battery goes up).
Remove Battery
Unlock the Battery
from Front of Notebook
Flush
If Battery Lock comes off,
reinstall as shown
Slide
1. Turn off the computer and remove the battery pack(s) as described in
Paragraph 6.5.1.
2. Press the upper card eject button to eject the upper card, lower button
controls the lower card and use both buttons for Type III devices.
3. To replace the PCMCIA device, remove any filler cards present and insert the
device. Reinstall any external cabling required for the device.
Left Side
Right
Side
4. The swing lever also pushes the computer up slightly off the MPB allowing
you to grasp the computer on the left hand side.
5. Lift the computer up slightly on the left hand side. Hold the computer securely
on both ends and pull the computer out of the MPB, left side first as shown
in Figure 6-8
6. Close the lever and close the expansion door on the bottom of the computer.
7. To replace the notebook in the MPB, turn the notebook over and open the
expansion door (slide the door toward the center of the notebook).
8. Slide the Release latch toward the front of the MPB to release the lever; then
swing the lever completely away from the MPB until the lever is 90 degrees
open from the side of the MPB.
1. Power down the notebook, disconnect the AC adapter, if installed, and remove
the battery pack as described in Paragraphs 6.5.1 and 6.5.2.
2. Disconnect the Mobile Productivity Base and any installed PCMCIA options.
3. Turn the computer over and remove the hard disk drive bay cover (refer to
Figure 6-9).
4. Grasp the drive loop and remove the drive from the notebook.
HDD
Access
Cover
Drive
Removal
Loop
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the four screws near the display hinges (rear of the notebook) as
shown in Figure 6-10.
3. Snap out and pull up the Status Panel (refer to Figure 6-10).
1 Remove Status
Panel Screws Snap out and
2
pull up Status
Panel
4. Lift up the Keyboard Assembly to free it from the notebook and then flip the
keyboard to the left side of the notebook as shown in Figure 6-10.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the four screws securing the Heat Sink Assembly to the notebook
and remove the heat sink.
4. Replacement of the Heat Sink Assembly is the reverse of Steps 1 through 3.
1 Remove Keyboard
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Refer to Figure 6-12 and remove the two rear screws that secure the Display
to the notebook housing. Note: You don’t have to remove the leftmost screw.
1 Remove Rear
Display Screws
CN8
CN1
5. Remove the screw securing the Display Cable to the Main Board and unplug
the Display Cable (CN1) and the Inverter Cable (CN8).
6. Remove the Display Assembly from the Base Assembly.
7. Replacement is the reverse of Steps 1 through 6.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove the two screws that secure the LED Board Assembly and unplug
cable connector CN7; remove the LED Board Assembly.
6. Replacement is the reverse of Steps 1 through 5.
1 Remove Keyboard
CN7
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the screw securing the CPU Board to the Main Board and pull up to
remove the board from connector J1.
5. Replacement is the reverse of Steps 1 through 4.
J1
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove four screws from the bottom of the base assembly.
6. Turn the base assembly over and remove Touchpad/Speaker connector
CN19.
7. Remove four screws from the four corners of the top cover (Figure 6-14).
8. Beginning from the left side of the unit, unsnap the top cover from the base
assembly.
9. Replacement is the reverse of Steps 1 through 8.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove two screws and unplug the VGA Video Board from the Main Board
as shown in Figure 6-16.
6. Replacement is the reverse of Steps 1 through 5.
1 Remove Keyboard,
Heat Sink and Top
Cover Assemblies
2 Remove Two Screws
and Unplug VGA Board
from Main Board
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the screw that secures the Power Supply Board Assembly to the Main
Board and remove the board from the base assembly.
5. Replacement is the reverse of Steps 1 through 4.
Power Supply
Board
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Unplug cable connectors CN9 and CN10 and remove the board.
5. Replacement is the reverse of Steps 1 through 4.
CN10 DC-In
Board
CN9
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove the four screws that secure the PC Card Module to the Main Board
(refer to Figure 6-19).
6. Replacement is the reverse of Steps 1 through 5.
PC Module
Main Board
Assembly
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove the Top Cover Assembly as described in Paragraph 6.5.10.
6. Remove fourteen screws from the bottom assembly as shown in Figure 6-20.
7. Remove the top cover as described in Paragraph 6.5.10.
8. Remove the Main Board Assembly.
9. Replacement is the reverse of Steps 1 through 8.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Keyboard Assembly as described in Paragraph 6.5.5.
3. Remove the Heat Sink Assembly as described in Paragraph 6.5.6.
4. Remove the Display Assembly as described in Paragraph 6.5.7.
5. Remove the Top Cover Assembly as described in Paragraph 6.5.10.
6. Remove the connectors on both sides of the Touchpad Assembly and detach
speakers from the top cover.
7. Remove the two screws that secure the Touchpad Assembly to the Top Cover
and remove the Button Assembly, Metal Plate, and Touchpad Main Sensor
as shown in Figure 6-21.
8. Replacement is the reverse of Steps 1-7.
Metal Plate
Touchpad
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Use a sharp object to remove the six bezel screw covers and remove the six
screws.
3. Pull out and remove the Display Bezel.
4. Replacement is the reverse of Steps 1 through 3.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Display Bezel as described in Paragraph 6.5.17.
3. Remove three screws securing the LCD Assembly and pull up on the LCD
Panel (Figure 6-23).
4. Tilt the LCD Panel away from the display cover; unplug the LCD Panel from
the Display Cable Assembly (Figure 6-23) and remove the LCD Assembly.
5. Replacement is the reverse of Steps 1 through 4.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Display Bezel as described in Paragraph 6.5.17.
3. Gently fold back the foil around the display and unplug the inverter cable,
CN2.
4. Next, remove the screw securing the DC-AC Inverter Board (larger of the two
PWBs) and the LCD ID Board (smaller of the PWBs) to the display back cover.
5. Press down on the latch (refer to Figure 6-24) and remove the Inverter Boards.
6. Replacement is the reverse of Steps 1 through 5.
CN2
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Unlatch the module by pressing the latch at the base of the MPB toward the
unlock icon (rear of MPB) (refer to Figure 6-25).
3. Simultaneously, grasp the recessed grip area on the module and pull module
out of the MPB.
4. Installation is the reverse of Steps 1 through 3.
Modular Bay
Mobile Productivity Release
Base Latch
CD-ROM
Drive
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26).
3. Pull the module out of the MPB.
4. Installation is the reverse of Steps 1 through 3.
Battery Groove
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26).
3. Pull the module out of the MPB.
4. Slide the Lever Release Latch forward to release the Docking Lever; extend
Docking Lever 90 degrees from the side of the MPB.
5. Remove fourteen screws from the top of the MPB as shown in Figure 6-27.
6. Lift up on the top section of the MPB Housing (from the left side as shown in
Figure 6-27) then pull to remove the top section of the MPB.
7. Replacement is the reverse of Steps 1 through 6.
1 Extend Dock
B Release lever
A
Dock Release
Lever Lever Release
Latch
Upper Cover of
Mobile Productivity Base
14 Screws
2 Remove Screws
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26); pull the battery pack out of the MPB.
3. Remove the MPB Housing as described in Paragraph 6.6.3.
4. Remove two screws securing the Docking Cable to release the assembly (refer
to Figure 6-28).
5. Remove the four screws securing the Docking Cable assembly to the Docking
Mechanism and remove the Docking Cable.
6. Replacement is essentially the reverse of Steps 1 through 5.
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26); pull the battery pack out of the MPB.
3. Remove the MPB Housing as described in Paragraph 6.6.3.
4. Remove the Docking Cable as described in Paragraph 6.6.4.
5. Remove the two screws that secure the Docking Mechanism to the bottom
section of the housing and remove the Docking Mechanism.
6. Replacement is the reverse of Steps 1 through 5.
Docking Mechanism
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26); pull the battery pack out of the MPB.
3. Remove the MPB Housing as described in Paragraph 6.6.3.
4. Remove the screw that secures the DC-DC Converter to the bottom section
of the MPB housing and remove the DC-DC-Converter.
5. Replacement is the reverse of Steps 1 through 4.
DC-DC Converter
CN8, CN9
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Using your thumbs, unlock the two battery locks at each side of the MPB
(refer to Figure 6-26); pull the battery pack out of the MPB.
3. Remove the MPB Housing as described in Paragraph 6.6.3.
4. Remove the MPB Docking Cable and Docking Mechanism as described in
Paragraphs 6.6.4 and 6.6.5.
5. Remove the screw that secures the DC-DC Converter to the bottom section
of the MPB housing and remove the DC-DC-Converter.
6. Remove the DC-In and Battery Charger Cable Connectors (CN 13 and CN10).
7. Remove the 12 screws that secure the Main Board to the bottom section of
the housing. Then pull up on the main board and remove it from the unit.
8. Replacement is the reverse of Steps 1 through 7.
CN10
CN13
Main Board
12 Screws
Assembly
2 $MA[0..11]
$MD[0..63]
2,6 $MD[0..63]
CN12
145
1 2
$MD0 3 4 $MD32
$MD1 5 6 $MD33
$MD2 7 8 $MD34
$MD3 9 10 $MD35
11 12
$MD4 13 14 $MD36
$MD5 15 16 $MD37
$MD6 17 18 $MD38
$MD7 19 20 $MD39
21 22
$CAS#0 23 24 $CAS#4
$CAS#1 25 26 $CAS#5
27 28
$MA0 29 30 $MA3
$MA1 31 32 $MA4
$MA2 33 34 $MA5
35 36
$MD8 37 38 $MD40
$MD9 39 40 $MD41
$MD10 41 42 $MD42 M+5V
$MD11 43 44 $MD43
45 46 1
$MD12 47 48 $MD44 R202
$MD13 49 50 $MD45 100KR3
$MD14 51 52 $MD46
$MD15 53 54 $MD47 2
55 56
DIMM_IN# 9
57 58
59 60
61 62
63 64
65 66
67 68
2 $MWE#
69 70
2 $RAS#2
71 72
2 $RAS#3 73 74
75 76
77 78
79 80
81 82
$MD16 83 84 $MD48
$MD17 85 86 $MD49
$MD18 87 88 $MD50
$MD19 89 90 $MD51
91 92
$MD20 93 94 $MD52
$MD21 95 96 $MD53
$MD22 97 98 $MD54
$MD23 99 100 $MD55
101 102
$MA6 103 104 $MA7
$MA8 105 106 $MA11
107 108
$MA9 109 110
$MA10 111 112
113 114
$CAS#2 115 116 $CAS#6
$CAS#3 117 118 $CAS#7
119 120
$MD24 121 122 $MD56
$MD25 123 124 $MD57
MOS_ON# 23
$MD26 125 126 $MD58
$MD27 127 128 $MD59 M+3.3V
129 130
$MD28 131 132 $MD60 1
$MD29 133 134 $MD61 R154 M+3.3V
$MD30 135 136 $MD62 100KR3 1 1U51C
$MD31 137 138 $MD63 0 4
R81 139 140 2
1 2 141 142 8 9
19 DIMM_DATA ID_CLK 19
143 144
2KR3 1
R82 146 7SOLCX125M
3K3R3
SDIMM144
2
$CAS#[0..7]
2 $CAS#[0..7]
DRAM_VCC DRAM_VCC
C171 C166 C167 C168 C169 C172 C179 C180 C176 C177 C178
SC10U16V SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U
1
R105
+5V
RTC
10KR3
CX21
2 SCD1U SD[0..7]
SD[0..7] 4,14,15,17,19,20,25
U40
24 VCC 11 SD7
AD7
PWRGOOD# 13 10 SD6
23 PWRGOOD# CS$ AD6
4 RTCAS RTCAS 14 9 SD5
AS AD5
RTCRW 15 8 SD4
19 RTCRW R/W$ AD4
19 RTCDS RTCDS 17 7 SD3
DS AD3
G1 18 6 SD2
RST$ AD2
RX13 1 2 21 5 SD1
RCL$ AD1
14 ENEXTCMOS 1 2 22 4 SD0
EXTRAM AD0
GAP-OPEN 20 19 IRQ#8
BC INT$ @IRQ8# 20,23
DUMMY-R3 2 23
X1 SQW 1
MOT
3 12 1
1 X2 VSS
16 R101
VSS
BT1 DUMMY-R3
BR1225-H1A BQ3285E
2 X4
1 4 2
2 3 +5V
CAN32768
4 5 6
D16
C213 RB731U
SCD1U
BIOS ROM 3 2 1
4 SA[0..15]
U45
SA0 12
A0 32
VCC
SA1 11
A1
SA2 10
A2 13 SD0
DQ0
SA3 9 14 SD1
A3 DQ1
SA4 8 15 SD2
A4 DQ2
SA5 7 17 SD3
A5 DQ3
SA6 6 18 SD4
A6 DQ4
SA7 5 19 SD5
A7 DQ5
SA8 27 20 SD6
A8 DQ6
SA9 26 21 SD7
A9 DQ7
SA10 23
A10
SA11 25
A11
SA12 4 31 MEMW#
A12 PGM MEMW# 4
SA13 28
+5V A13
SA14 29
A14
1 U44A SA15 3 16
A15 VSS
4 19 XSA16 2 A16
RTCROMCS# 1 SB:ADD 100KR3 FOR QUICK DISCHARGE
4 RTCROMCS# 19 XSA17
3 22
CE 1
VPP
DISROM 2 MEMR# 24 30 1
25 DISROM 4 MEMR# OE A17/N.C
RX21
7 SSHC32 S128K8-150 100KR3 C226
SCD1U
2
3
2 Q6
S2N3906
1
1 M+12V
R147
10KR3
2
3
FLASH_ON 2 Q7
19 FLASH_ON
RN1424
1
+5V
C154 C153
4,13,15,17,19,20,25 SC1KP SCD1U M+5V
1 1
KKKKKKKKKKKK KKKK R87 R84
SD[0..7] CCCCCCCCCCCC CCCC 10KR3 100KR3
SD[0..7]
O O O OO OO O O O OO OO O O 1
L L L LL LL L L L LL LL L L RY1 2 2
1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 47KR3
0 1 2 3 4 5 6
2 SW1
SC:ADD RY1 PULLED-UP 1 4
4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 U28 2 3
KBC_5V M+5V 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3
LSM702
PPPPP PPPPPPPPPPP
L12 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
1 2 KROW8 49 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 32 HOTKEY#
P37 P20 HOTKEY# 19
KROW7 50 31
P36 P21 3.3V/5V# 10
SCHOKE-D KROW6 51 30 X2
P35 P22
KROW5 52 29 1 1
P34 P23 SUSPEND# 10,11,15
KROW4 53 28 R83 M+5V
KROW3
KROW2
KROW1
54
55
56
P33
P32
P31
M38813 P24
P25
P26
27
26
25
CLLED#
NLLED#
CLLED#
NLLED#
28
28
DUMMY-R3 2
1
P30 P27
57 24 2 3 RESON-8MHZ RX08
58 VCC VSS
TDATA 23 KBC_5V 20KR3
26 TDATA P61/CNTR0 P XOUT
TCLK 59 4 22 R79
26 TCLK P60/INT5/OBF2 XIN
SD7 60 5 21 B_SMB_DATA 1 2 R76 2 SB: ADD 20K PULL-UP TO @SUSRST#
DQ7 / P40
SD6 61 I 20 B_SMB_CLK 1 2
DQ6 P41/INT0
SD5 62 P B 19 DUMMY-R3
DQ5 5 P P P FPP RESET# @SUSRST# 20
SD4 63 18 DUMMY-R3
DQ4 3 5 PP 4 4 0 4 4 CNVSS
SD3 64 DQ3 / 2 5 5 7 6 # 4 3 P42/INT1 17 KBDATA
S / 1 0 / / / / / +5V KBDATA 21,26
R S / / I I OO I
D D D WR C D C TR N N BBN
QQQRD SAY L XX T T FF T 1
2 1 0 # # # 0 # K DD 4 3 1 0 2 RX09
M38813 20KR3
1 1 1 1 1 1 1
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 SB: ADD IRQ1 PULL-UP
2
SD2
SD1
KBCLK
IRQ1
KBCLK 21,26 PIN1,4
ON PASSWORD ENABLE
IRQ1 4
SD0 IRQ12
IRQ12 4
4 IOW#
IOW#
IOR#
OFF PASSWORD DISABLE
4 IOR#
@KBCS#
20 @KBCS#
SA2
4 SA2
MATRIX1 KB TYPE
13 ENEXTCMOS
ANYKEY
23 ANYKEY 0 TYPE 0
EN_213RI
EN_213RI
PS2DATA SB: M+5V CHANGED TO +5VSB
21,26 PS2DATA 1 TYPE 1
PS2CLK
21,26 PS2CLK
+5VSB
CN14
KCOL1 1
2 KCOL2
KCOL3 3 1 U25A
4 KCOL4 4 RX26
KCOL5 5 B_SMB_DATA 1 2 1 2
SMB1_DATA 27
6 KCOL6
KCOL7 7 470R3
8 KCOL8
KCOL9 9 19 7 1 SOHC4066
3
10 KCOL10 SMB_SEL
KCOL11 11
12 KCOL12
KCOL5 13 1 U25B
14 KCOL13 4 RX27
KCOL14 15 B_SMB_CLK 11 10 1 2
SMB1_CLK 27
16 KCOL15
KCOL16 17 470R3
18
7 1 SOHC4066
2
ELCO-CONN18 SMB2_DATA 21
SMB2_CLK 21
KBC_5V KBC_5V U25C
1
4
4 3
+5V
RP21 1 U61F
KROW4 1 10 4 7 5 SOHC4066
KROW3 2 9 KROW8
KROW2 3 8 KROW7 13 12
KROW1 4 7 KROW6
5 6 KROW5 U25D
1
7 SSHC14 4
SRP10K 8 9
1
SMB_SEL=1 : SELECT SHIVA BATTERY R68
100KR3
SMB_SEL=0 : SELECT UMA BATTERY 7 6 SOHC4066
2
CN5
KROW1 1
2 KROW2
KROW3 3
4 KROW4
KROW5 5
6 KROW6
KROW7 7
8 KROW8
ELCO-CONN8
8 7 6 5 8 7 6 5
RP12 RP11
SRN33 SRN33
RP10
R42 1 2 3 4 1 2 3 4 1 8 ACK# 16,22
1 2 2 7
16,22 STROB# BUSY 16,22
3 6 PE 16,22
33R3 4 5
4 IRQ[3..7] SLCT 16,22
I I I I I SRN33
+5V RR RRR RP9
QQ QQ Q 1 8
2 7 SLCTIN# 16,22
3 4 5 6 7 INIT# 16,22
3 6
4 5 ERROR# 16,21
4 RSTDRV AUTOFD# 16
C112 1
SCD1U 0 9 9 9 9 9 9 9 9 9 9 8 8 8 8 8 8 8 8 8 8 7 7 7 7 SRN33 U23
0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6
MI I V I I I SPP PPVPPPPA BP S SI EA
RRRDRRR T DD DDS DDDDC UE L L N RF
Q Q D Q QQ B0 1 2 3 S4 5 6 7 K S/ CI I RD
$SIO_24M 3 4 5 6 7 / / / / / / / / / / Y WT N T / /
/ WI T WR D M D M D / D/ / / HD
1 A RNR PD SSRSR WA W S D DS 75
D I DK A KE AE 1 AT GT I ST DCD1 DCD1# 20
R57 R T E0 T CNT N I AAER ER 74 DSR1#
DSR1
47R3 A EX A H0 E 1 T T P LB 73 SIN1
T G 0 / E/ / SIN1
E M A D 72 RTS1#
RTS1/BADDR0
2 0 T S E 71 SOUT1
R T N SOUT1/BOUT1/BADDR1
70 CTS1#
1 R S CTS1
C125 B E 69 DTR1#
L DTR1
SC39P 1 68 RI1#
4 0WS# CS1/ZWS RI1 RI1# 20
2 67 SA15
4,19 DRQ2 DRQ2 DCD2/A15
R52 3 66
4 DACK#2 DACK2 DSR2/IRQ12/IRRX2/IRSL0 IRRX2 16
1 2 4 65
4 TC TC SIN2/IRRX1 IRRX1 16
NOT INSTALLED $SIO_24M 5 64 SA14
8 $SIO_24M X1 RTS2/A14
100R3 6 63 IRTX
IRSL1 IRSL1 SOUT2/BOUT2/CFG0/IRTX IRTX 16
C118 7 62 SA13
VSS CTS2/A13
SC47P SD7 8 D 61 SA12
D7 R DTR2/A12
SD6 9 60 SA11
D6 A RI2/A11
PC87338
SD5 10 D T 59
D5 VSS
SD4 11 R E 58
D4 V 1 IRQ15/SIRQI1/DRQ3 DRQ3 4,19 SA[11..15] 4
SD3 12 2 / 57
D3 IRQ11 IRQ11 4
SD2 13 D2 / M IRQ10 56 IRQ10 4
SD1 14 P S 55
D1 N E IRQ9 IRQ9 4
SD0 15 F N 54
D0 / 1 DRQ0 DRQ0 4,19
16 53
4 IOW# WR D / DACK0 DACK#0 4
17 R C 52
4 IOR# RD M 2 S DACK1 DACK#1 4
18 51
4 AEN AEN T D 3 0 IOCHRDY IOCHRDY# 4
SA9 19 R E / /
A9
SA8 20 1 N S SD
4,13,14,17,19,20,25 SD[0..7] A8 / S I I R
SA7 21 I E R RA
A7
SA6 22 D L Q QT
A6 L / 1 I E
SA5 23
E
A5 A 3 2 0
SA4 24 A4 D / D D / / /
SA3 25 S HR WW I R I R I DM
A3 K DDD T GDS R 1 MNA R AS
AC RSA RAAT DV S D/ T DT SVCE
AAA1 H Q E T WK T T E I S L R P R E E LDKN
2 1 0 0 G 1 L AP 0 E AP RS 2 0 D0 X1 2 D3 0
PC87338VJG
2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5
6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
SA2
SA1 +5V
DACK#3 4
SA0
SA10 PNF 16
C151 C155 C159
RPM
SCD1U SC10U16V SC1KP
4 SA[0..10] INDEX# 22
MTR0#
MTR0# 22
22 DSKCHG# DR0# 22
4,19 DRQ1 IRSL2
22 HDSEL
22 RDATA#
22 WRTPRT#
22 TRK0#
22 WGATE#
22 WDATA#
22 STEP#
22 FDIR
M+5V
U7
C61 SCD1U 28 26 C81
24 C1+ VCC 27 C82
C1- V+
1 C2+ 3
V-
SCD1U 2 SCD1U
C2-
SOUT1 14 T1IN 9 SCD1U
T1OUT PSOUT1 16,21
RTS1# 13 10
T2IN T2OUT PRTS1# 16,21
DTR1# 12 T3IN 11
T3OUT PDTR1# 16,21
20
R2OUTB
SIN1 19 4
R1OUT R1IN PSIN1 16,21
DSR1# 18 5
R2OUT R2IN PDSR1# 16,21
CTS1# 17
R3OUT 6
R3IN PCTS1# 16
16 7
20,23 @RI1# R4OUT R4IN PRI1# 16,21
20 @DCD1# 15 R5OUT 8 16,21
R5IN PDCD1#
23
FORCEON
22
14 SUSPEND# 21 FORCEOFF#
25
INVALID# GND
MAX3243
CX13
SCD1U
1
RX35
1MR3
SD[0..15]
RP49
SD0 1 10
+5V SD1 2 9 SD4
+5V SD2 3 8 SD5
SD3 4 7 SD6
5 6 SD7
GF1 SRP10K
41 1 SD4 +5V +5V
A1 B1
42 2 SD3
A2 B2
43 3 SD2
A3 B3
RSTDRV 44 4 SD1
4 RSTDRV A4 B4
IOCHRDY# 45 5 SD0
4 IOCHRDY# A5 B5 RP46
AEN 46 6 MEMW#
4 AEN A6 B6 SD8 1 10
IOW# 47 7 MEMR#
4 IOW# A7 B7 SD9 2 9 SD15
IOR# 48 8 RTCROMCS#
4 IOR# A8 B8 RTCROMCS# 4 SD10 3 8 SD14
49 9 XSA17
A9 B9 XSA17 19 SD11 4 7 SD13
4 BALE BALE 50 A10 B10 10 XSA16 XSA16 19
51 11 SBHE# 5 6 SD12
A11 B11 SBHE# 4
IRQ11 52 12 LA19
4 IRQ11 A12 B12 LA19 4 SRP100K
LA23 53 13 LA18
4 LA23 A13 B13 LA18 4 +5V +5V
4 LA22 LA22 54 A14 B14 14 LA17 LA17 4
4 LA21 LA21 55 A15 B15 15 SA16
LA20 56 16 SA15
4 LA20 A16 B16
MEMR* 57 17 SA14
4 MEMR# MEMW* 58
A17 B17
18 SA13
4 MEMW# A18 B18 RP47
DISROM 59 19 SA12
13 DISROM A19 B19 SBHE# 1 10
FLASH_ON 60 20 SA11
19 FLASH_ON A20 B20 LA19 2 9 LA23
PWRGIN 61 21 SA10
23 PWRGIN A21 B21 LA18 3 8 LA22
62 22 SA9
A22 B22 LA17 4 7 LA21
63 23 SA8
A23 B23 5 6 LA20
SD15 64 24 SA7
A24 B24
SD14 65
A25 B25
25 SA6
SD13 66 26 SA5 SRP100K
A26 B26
SD12 67
A27 B27
27 SA4
SD11 68 28 SA3
A28 B28
SD10 69 29 SA2
A29 B29
SD9 70 30 SA1
A30 B30
SD8 71 31 SA0
A31 B31
SD7 72 32
A32 B32
SD6 73
A33 B33
33 +5V +5V
SD5 74 34
A34 B34
75 35 SA[0..16]
A35 B35 SA[0..16] 4
76 36
A36 B36
77 37
A37 B37
78 38 RP45
A38 B38
79 39 IRQ11 1 10
A39 B39
80 40 IRQ10 2 9 IRQ3
A40 B40 4 IRQ10 IRQ3 4
IRQ9 3 8 IRQ4
MS-DBG-GF80 4 IRQ9 IRQ4 4
4 IRQ7 4 7 IRQ5
IRQ7 IRQ5 4
5 6 IRQ6 IRQ6 4
SRP10K
+5V +5V
RP48
MEMR# 1 10
MEMW# 2 9
IRQ15 4
IOR# 3 8
IRQ14 4
IOW# 4 7
RSTDRV IRQ12
5 6 4
SRP10K
RP36
4,19 DRQ1 1 10
DRQ1
DISROM 2 9 DRQ0
DRQ0 4,19
DRQ3 3 8 DRQ5
4,19 DRQ3 DRQ5 4,19
DRQ2 4 7 DRQ6
4,19 DRQ2 DRQ6 4,19
5 6 DRQ7 DRQ7 4,19
SRP4K7
+5V
RP41
1 8 MEMCS16#
MEMCS16# 4
2 7 IOCS16#
IOCS16# 4
3 6 REFRESH# REFRESH# 4
4 5
SRN100K
+5V
R258
1 2 IOCHRDY#
1KR3
+5V
R263
1 2
IOCHK# 4
10KR3
8 7 6 5 SPOLY100 MLB321611
RP3
SRN10K
CN9
1 2 3 4 7
R1 L4
1 2 1 2
14,21 KBCLK R2 L5 6
1 2 47R3 1 2 MLB321611 5
14,21 PS2CLK
R3 L6 4
47R3 1 2 MLB321611
1 2 3
14,21 KBDATA
R4 L7 2
1 2 47R3 1 2 MLB321611 1
14,21 PS2DATA
47R3 MLB321611
8
C79 C78 C77 C76
SC47P SC47P SC47P SC47P SD5339810-6
+5V
8 7 6 5
RP31
SRN10K
1 2 3 4
+5V
TOUCHPAD CONNECTOR
CN19
17 18
1
2
3
18 SPK_R1 4
5
14 TCLK
6
TDATA 14
7
8
9
10
11
18 SPK_L1
12
13
14
C234 15 16 C224
SC47P SC47P
SD5255917-14
AUD_GND
1
BAT_VS 2 +5VSB
3 1 +5VSB
4 R253
14 SMB1_CLK 47KR3 U86F
5 1
14 SMB1_DATA AD+ 4
BAT_TH 6
7 2
C351 C352 AD_IN#
8 13 12 AD5V
SCD1U SC1KP AD5V 23
R252 3
1 22 Q9 7 SSHC14
MOLEX-CON8 RN1424
150KR3 1
BATTERY CONNECTOR
ADAPTOR PLUG-IN DETECTION CIRCUIT
BAT+ BAT+
SMB1_CLK, SMB1_DATA: CHARGER SMB I2C
+5VSB
1
R251
CN22 10KR3
1 2 CSI, CSO:CHARGER HANDSHAKING
3 4 2 SIGNALS
5 6
SMB1_CLK 7 8 SMB1_DATA
9 10 ADAPTOR/BATTERY INTERFACE
21 CSO CSI 21
BAT_VS 11 12
13 14
19 CHGR_CLK CHGR_DATA 19 DCBATOUT AD+
15 16 BAT_TH
28 CHARGE_LED
17 18 D28
19 20 CHGR_CLK,CHGR_DATA: CHARGER SEEPROM'S CLOCK & DATA 1 2
MOLEX-CONN20A NSQ03A04-1
D27
1 2
+5V
+5VSB
DCBATOUT DCBATOUT
CN20
1 2
AD+ 3 4
5 6
7 8
19 BL2# BL1# 19
9 10
11 12
29 ON/OFF# 13 14
15 16 BL3#
17 18 AD5V
19 20
6/18 MOVE BL3# FROM PIN 10 TO PIN 16
MOLEX-CONN20A
1
R272 CHARGER CONNECTOR
0R3
2
CHARGER SEEPROM
ADDRESS SELECT
SHIVA:PULL LOW(ADDRESS 0)
UMA:OPEN(ADDRESS 1)
INTERNAL PULLED HIGH AT CHARGER BOARD
3 3
2 Q1 2 Q2
27 CHARGE_LED 21 DK_CHG_LED
RN1424 RN1424
1 1
M+5V +5V
+5VSB
CN7
19 20
1
2
3 SB: ADD LOWBAT_LED
4
LOWBAT_LED 19
COVER_SW 5
20 @COVER_SW
6 POWER_SW2
POWER_SW2 29
7
8
CHARGE_LED# 9
10 HDD/FDD_LED#
14 NLLED# NLOCK_LED# 11
12 STANDBY_LED#
CLOCK_LED# 13
14 CLLED#
14 MIC_R
15
18 INTMIC 16
17 18
AUD_GND
SD5255917-16
+5V
CLOSE TO CONNECTOR
1
R141
10KR3
2
24 HDD_LED# HDD/FDD_LED# 19
21 DK_DISKLED#
19 STNDBY#
11 10 9 8 12 11 STANDBY_LED#
1
7 SSHC14 D7 7 SSHC14 7 SSHC125
S1N4148
1
R14 2
2MR5
1
2 R26
220KR3
2 C59
SC1U10V5JY
1 2 11 10 13 12 11 10 13 12 1 2 3 4
11 10 13 12 13 12 9 8 13 12
+5V
+5V
1 U48D
4
12
11 +5V
13
7 SSHC08 AUDIO_+5VA
1 U43B
0
1 U75D
14 9 4
VCC P Q
12 R 8 9
D
11
CLK
8
C Q 7 6
7 SOHC4066
GND L
SSHC74
1
3
+5V
AUD_GND
9 8 12 11 2 3 5 6 12 11
C15 3 C18
SC1KP SC1KP
C27 C50
C33 3 C53 C34 C45 C54 C48
SC1KP SC1KP SC22U10V0JY SC22U10V0JY SC22U10V0JY SC22U10V0JY SC22U10V0JY SC22U10V0JY
1 2
3 C3
J1A
C32 C14 C38
SC22U10V0JY
1 51 SC1KP SC1KP SC22U10V0JY
2 52
3 CPU_VCC
53
4 54
$CPU_A25 5 55 $CPU_A30
$CPU_A26 6 56 $CPU_A29
$CPU_A27 7 57 $CPU_A21
$CPU_A28 8 58 $CPU_A22 J1B
$CPU_A3 9 59 $CPU_A23 101 151
$CPU_A4 10 60 $CPU_A24 102 152
$CPU_A5 11 61 103 153
$CPU_A6 12 62 104 154
$BE#[0..7]
2
2 $CPU_D[0..63]
Figure B-1 MPB CPU Board Logic Diagrams (Sheet 2 of 3)
VCC_CPU
C30
SCD1U
1 CPU_VOLT0
1
R25
1 CPU_VEND 36KR3D
1 CPU_ID3 2
1 CPU_VOLT1
1 CPU_ID2
1 CPU_ID1
1 CPU_ID0
1 CPU_THM
1 1 1 1 1 1
R11 R12 R3 R2 R14 TH1
0R3 0R3 0R3 0R3 0R3 TH301
2 2 2 2 2 2
1 CPU_THMG
FOR SHIGA
Not Installed
SHIVA NOT INS.
CPU_THM
VCC_I/O
J2
20
VCC_I/O
1
R8 2
1 $CPUINIT R9 1 2 3
1 2 4
1 $CPURST 33R3 5
2 $RS# 33R3 R27 6 C31 C42 C52 C10 C35 C39
C11
2 $PRDY 1 2 7
$TDI R22 8 SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U
2 $TDO 1 2 33R3 9
2 $TMS 10
33R3 11
2 $TCK 12
13
2 $TRST# 14
15
16
17
18
19 C24
C28 C41 C5 C23 C8 C17
HRS-CON18 SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U SCD1U
SHIVA & SHIGA NOT INS.
THERMAL SENSOR
1
2
3
4
5
6
7
8
AMP-CON8
CN2
1
2
3
4
C2 5
SC1000P50V3MX 6
7
8
C3
SC1000P50V3MX
C4 MOLEX-CON8
SC1000P50V3MX
C1
SC1000P50V3MX
C5 C6
SC1000P50V3MX SC1000P50V3MX
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 1 of 10)
TP339 TP313
TP310 T310 T339 T313
8 7 6 5
RP17
SRN22
1 2 3 4
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 2 of 10)
I I I I
D DD D
E EE E
_ _ _ _
IDE CONTROLLER D DD D
1 1 1 1
5 4 3 2
AD+
T329
1
TP329
R102
DUMMY-R3 1
T332
R101
100KR3
TP332 TP-1
C88 C89 2 TP-1
DK_PJIN# T330
SCD1U SC1KP
DK_PJIN# 2
1,10
Q7
3
TP330 TP-1
1
2 2N7002 TP-1
TP328 TP-1
T333
AD+ TP333
CN13
2
1 +5V
LINE_OUT_L
4
3 T328
6
LINE_OUT_R
R162 5
8
1 2 7
10
DK_LINEIN_L 9
AMP_5V +5V
1 12
1KR6 11
1 DK_LINEIN_R 14
R159 13
L7
16
1 2 15 C87
DK_MIC 1 2
1 18
17
DK_MIC_PJIN SCD1U
1 20
1KR6 19
SCHOKE-D
3
D14 HRS-CONN20D
SB BZX84C4V3L
AUD_GND
C85
SC100P
R100
1 2
56KR3
AMP_5V
C84
SCD1U U19
8
R97
1 2 AUD_GND
DK_SOUND_L
1 TP329 V
2 D C82
IN_A
D
20KR3 1 TP328 1 2 LINE_OUT_L
OUT_A
TP332
R98 6 ST47U10VDM
IN_B
DK_SOUND_R 1 2
1
C83
TP330
20KR3 3 7 TP333 1 2 LINE_OUT_R
BYPASS OUT_B
DK_PJIN#
ST47U10VDM
5
SHUTDOWN
G
N
D
C81
SC1U LM4880M
4
AUD_GND
AUD_GND
R99
1 2
56KR3
C86
SC100P
AUDIO AMP.
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 4 of 10)
+3.3V 12
2MR5
7SSHC14
D2
2
1 1
C69 C68 C67
SCD1U SC1KP 2 ST100U16VDM CN14 S1N4148
DCBATOUT
+5V 1 C23
2 3V
SC1U
3 3V
1 1 4 5V
C59 C58 C64 C61 5 5V C106 C107
GND C108 C109 C110
2 ST100U16VDM 2 ST100U16VDM SCD1U SC1KP 6
R112 GND
1 2 7 SCD1U SCD1U SCD1U SCD1U SCD1U
DCBATOUT 10KR3 3V_ID
8
9 DCBATT_IN +5V
1 1 1 2 10 DCBATT_IN
R111
C66 C65 11 3.3V ON/OFF
2 2 +5V 12 PGVCC
ST22U35VDM ST22U35VDM 10KR3 PG
13
ON/OFF# ON/OFF C96 C97 C98 C99
1 14 C100
15 5VSB SCD1U SCD1U
SCD1U SCD1U SCD1U
+12V 16 12V
1 +8V 8V
R141 T62-030-C
100KR3
2
DC/DC
+12V BAT+
+5V +5V
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 6 of 10)
DC/DC & POWER SWITCH
AD+
C75 C76
+5VSB
SCD1U SC1KP 1 +5VSB
R87 +5VSB
47KR3 1 U22C
R104 4 3 DK_BL3#
SC 4
TP350 1 2 2 TP292 3
DK_MOSON 1,10
1 Q4 1
560R3 2N7002 RX1
BAT+ 2 100KR3
DK_BL3# 3 SOHC4066
1 QX1 3 1 C113 7 5
2N7002 D7 R88 SCD1U RX3 2
AD5V
2 BAV99 150KR3 1 2 LOOPBACK
1 2 2 1KR3
CX3
DCBATOUT SCD1U 3
1
DX3
C72 C73 C74 BAV99
2 ST22U35VDM SCD1U SC1KP
1 2
+5VSB
BAT+ SC
DCBATOUT
D8
AD+ 2 1
20 10
19 9 TP-1
18 8 T350
SMB_CLK SMB_DATA TP350
17 7
1,10 CSO 16 6 CSI 1
BAT_VS MASTER/SLAVE SELECT
15 5 TP-1
ID_CLK 14 4 ID_DATA IN MASTER MODE PULL LOW T327
BAT_TH +5VSB TP327
1,10 DK_CHG_LED 13 3
12 2
11 1 U22A TP-1
1 T367
MOLEX-CONN20 +5V 4 1,8,10 DK_BL3#
ID_CLK
1 2 I2C_CLK
TP-1
1 ID_CLK T363
1 1 R108 7 1 SOHC4066
R107 R106 DUMMY-R3 +5V 3 1
0R3 0R3 TP-1
EN_CHGR_ROM ID_DATA T364
DCBATOUT DCBATOUT
2 2 2 U20
TP336 1 8
TP335 2 A0 VCC 7 TP-1
CN8 A1 TEST +5VSB
TP337 3 6 I2C_CLK AD5V T372
20 10 A2 SCL
4 5 I2C_DATA U22B 1,10
19 9 GND SDA 1
4
18 8 +5VSB S256K8 ID_DATA TP-1
T 11 10 I2C_DATA
DK_BL2# 17 7 DK_BL1# 1,10 1 1 1 P
16 6 R110 R109 R105
AD+ 15 5 24C02 2
DUMMY-R3 DUMMY-R3 0R3 8
CHARGER_ON 14 4 +5V
DK_BL3# 5 7 1 SOHC4066
13 3 2 2
1 12 2 AD5V
R83 2 2
11 1 1
100KR3 1
MOLEX-CONN20 R113 R142
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 7 of 10)
2 0R3 100KR3
2 2
CHARGER I/F
FRAME# DEVSEL#
$PCICLK1
1 1 1
R48 R49 R47
47R3 47R3 47R3
2 2 2
TP355 TP356
TP309
CN3 1
1394-1,2,3,4 ADD GUARD TRACE. R147
10KR3
61 1 +5V
1394-2 Q8
62 2 1394-1 1 2
1394-4 63 3 1394-3 2 TP306
64 4 4 5 6
1394POWER 65 5 1394POWER 3
1394POWER 6 D10 S2N3906 1
IRDY# TRDY# 1394-6 66 6 1394-5 RB731U R116
1394-8 67 7 1394-7 10KR3
1394-10 68 8 1394-9 2N3906
1 1 3 2 1
69 9 2
R46 R45 70 10 FLASH_VPP
47R3 47R3 FBDATA 71 11 FBCLK TP342
1,10 FBDATA 72 12 Y1 I2C_CLK 1,7
Y0 1
2 2 1,10 Y0 73 13 Y3 Y1 1,10
TP358 TP302 Y2 C92 C91
1,10 Y2 74 14 Y5 Y3 1,10 2
Y4 ST10U SCD1U Q9
1,10 Y4 75 15 Y7 Y5 1,10
Y6 Y6 3
1,10 76 16 Y7 1,10 2
C15 C16 77 17 UV1 FLASH_ON
UV0
SC39P SC39P 1,10 UV0 78 18 UV3 UV1 1,10 1
UV2 Not install 1 RN1424
1,10 UV2 79 19 UV5 UV3 1,10
UV4
1,10 UV4 UV6 80 20 UV7 UV5 1,10
1,10 UV6 81 21 ZV_HREF UV7 1,10
ZV_PCLK
1,10 ZV_PCLK 82 22 3.3V ZV_HREF 1,10
3.3V
+3.3V 83 23 +3.3V
T355 FBACT# 84 24 IIMCLK
TP355 1 FBACT# ZV_MCLK 1,10
IILR 85 25 ZV_VREF
1394-8 T197 1,10 ZV_LRCLK ZV_VREF 1,10
IIDATA 86 26 IISCLK
TP-1 1,10 ZV_DATA 87 27 INTB# ZV_SCLK 1,10
1,2,10 INTC# INTC# INTB#
T356 PCIRST# 88 28 $FB_CLK
TP-1 TP356 1 PCIRST# $PCICLK1 1
89 29
1394-2 T198 90 30 REQ#0
GNT#0 REQ#0
TP-1 1 GNT#0 AD30 91 31 AD31 1,10
T309 AD28 92 32 AD29
TP-1 TP309
AD26 93 33 AD27
1394-6 T199 94 34 AD25
AD24
TP-1 95 35
T358 96 36 PCI ID AD19
TP358 1,2,8,10 C/BE#3 C/BE#3
TP-1 97 37 AD23
AD22
1394-3 T200 AD20 98 38 AD21
TP-1 AD18 99 39 AD19
T302 AD16 100 40 AD17
TP-1 TP302 101 41 C/BE#2
FRAME# FRAME#
1394-1 T201 1,2,10 3.3V 102 42 3.3V C/BE#2 1,2,8,10
TP-1 +3.3V 103 43 +3.3V
1,2,10 TRDY# 104 44 IRDY#
TP-1 TRDY# 105 45 DEVSEL# IRDY# 1,2
1,2,10 STOP# STOP# 1,2
1394-4 T202 PERR# 106 46 EN_FBZV# DEVSEL#
1,2,10 PERR# EN_FBZV# 1
C/BE#1 107 47 SERR#
FLASH_VPP T104 1,2,8,10 C/BE#1 108 48 PAR SERR# 1,10
AD15
TP-1 109 49 PAR 1,2,10
1394-9 T203 110 50
TP-1 AD13 111 51 AD14
112 52 AD12
AD11
TP-1 AD9 113 53 AD10
1394-10 T195 114 54 AD8
1,2,8,10 C/BE#0 C/BE#0
115 55
T306 116 56 AD6
TP306 AD7
TP-1 AD5 117 57 AD4
1394-5 T213 118 58 AD2
AD3
TP-1 AD1 119 59 AD0
TP342 T342 120 60
TP-1
1394-7 T214 Advanced PCI I/F
TP-1
1394POWER T124 HRS-CONN120B
TP-1
TP-1
1,2,10 AD[0..31]
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 8 of 10)
+5V 7 SSHC00
SMD100 L4
F3
2 TP38 1 2
1 U2D
SPOLY100 MLB321611 8 CN12 +5V
15V/1.1A
1
R95 TP40 1 L5 2 1
5 12
2 4
1 PS2CLK
R96 L6 3
TP39 47R3
1 MLB321611 1 11
PS2DATA 9 13
2 2
2 1
47R3 4
1,10
6 7 SSHC00
MLB321611
8
T117 10
2 TP117
15V/1.1A F4
TP-1 7 SSHC32
SPOLY100
T42
TP42
SMD100 +5V
1 U1D
TP-1
T41 1
TP41 12 4
11
1
L8 TP-1 13
MLB321611 T38
TP38
6
SSHC32
7
R151 2 5 JP1 TP-1
1 1
TP40 T40
2 2
AMP-USB-CONN
1 USBP0 3
1 USBP1 4
33R3 2 TP-1
1 +5V
C116 TP39 T39 U12D
R152
C114 C115 SCD1U 1
8
33R3 TP-1 4
SC47P SC47P 12
7 TP125 T125
11
13
TP-1
7 SSHC32
TP303 T303
+5V
+5V +5VSB TP-1
U11F
1 T352
4 TP352
U11E
13 12 1 +5V
4 U22D
8 1
11 10 4 TP-1
TP352 R25
7 9 1 2
SSHC14
7 SSHC14
7 6 SOHC4066 10KR3
4 U5A
5 14
Q P VCC
2
R D
3
6
CLK
PS/2 , USB CONN.& NO USE GATE Q C
L GND
7
SOHCT74
1 R26 2
TP303 1
10KR3
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 9 of 10)
Figure B-3 MPB Main Board (Motherboard) Logic Diagrams (Sheet 10 of 10)
8 Y2 8 UV6 1,2,8 AD31 2 IRQ15
1,8 SERR#
TP-1 TP-1 TP-1 TP-1
T45 TP-1 T155 T210 T266
T106
1 FDIR 8 UV0 1,2,8 AD29 INTB#
1,2 DEVSEL#
TP-1 TP-1 TP-1 TP-1
TP-1
IRDY#
1
R23
47R3
C41
VGA BOARD CONNECTOR
SC39P
DVCC CVCC1
3 VMAD[0..15]
V V VV V V VV V +5V
V V V VV V V VV V VV V V VV V VV V V VV V V VV V VV V V A A AA A A AA A
M M M MM M M MM M MM M M MM M MM M M MM M M MM M MM M M A A AA A A AA A
A A A AA A A AA A AA A A AA B BB B B BB B B BB B BB B B 0 1 23 4 5 67 8 AVCC
D D D DD D D DD D DD D D DD D DD D D DD D D DD D DD D D
RP9 R21 0 1 2 34 5 6 78 9 11 1 1 11 0 12 3 4 56 7 8 91 1 11 1 1
1 8 VAA0 1 2 01 2 3 45 0 1 23 4 5 RP8
2 7 VAA5 PCASAL# 1 8
CASAL# 3
3 6 4K7R3 1 1 11 1 1 11 1 1 11 1 11 1 11 1 11 1 1 11 1 1 11 1 1 1 1 1 11 1 11 1 1 11 1 1 2 2 PCASAH# 2 7
6 6 66 6 6 66 7 7 77 7 77 7 22 2 33 3 3 33 3 3 34 4 4 4 4 4 44 4 55 5 5 5 4 54 0 6 8 8 0 0 CASAH# 3
4 5 SB U4 PWEA# 3 6 WEA# 3
2 3 45 6 7 89 0 1 23 4 56 7 78 9 01 2 3 45 6 7 80 1 3 4 5 6 78 9 01 2 3 9 9 2 82 8 6 0 1 5 6 PRASA# 4 5
RASA# 3
SRN4K7
M MM M M MM M M MM M MM M M M M MM M M MM M M MM M M MM A AA A A AA A A A B B MM MD I I C C
A AA A A AA A A AA A AA A A B B BB B B BB B B BB B B BB A AA A A AA A A V V V VV VV V V V V SRN33
D DD D D DD D D DD D DD D D D D DD D D DD D D DD D D DD 0 12 3 4 56 7 8 C C C CC CC C C C C RP7
R24 0 12 3 4 56 7 8 91 1 11 1 1 0 1 23 4 5 67 8 9 11 1 1 11 C C C CC CC C C C C PRASB# 8 1
0 1 23 4 5 01 2 3 45 AB C 0 1 RASB# 3
AD22 1 2 11 156 PWEB# 7 2
IDSEL RASA# WEB# 3
33R3 123 PCASBH# 6 3
22 RASB# 159 PCASBL# 5 4 CASBH# 3
1 FRAME# FRAME# CASAH# CASBL# 3
23 160
1 IRDY# IRDY# CASAL# UD[0..3]
24 125 SRN33
1 TRDY# TRDY# CASBH# VRAMOE# 3
1 DEVSEL# 25 DEVSEL# CASBL# 126 RP5
27 157 1 8 UD3
1 STOP# STOP# WEA#
31 124 R12 2 7 UD2
1 C/BE#[0..3] 1 PAR PAR WEB#
155 1 2 U3 3 6 UD1
C/BE#0 43 OEAB# 1 20 4 5 UD0
C/BE0#
C/BE#1 32 71 33R3 2 19
C/BE1# P0
C/BE#2 21 72 3 18 SRN22
C/BE2# P1
C/BE#3 10 73 4 17
C/BE3# P2 74 5 16 RP6
P3
207 75 6 15 1 8 LD3
1 PCIRST# RESET# P4
76 7 14 2 7 LD2
P5
179 ROMA0 P6 78 8 13 3 6 LD1
180 79 9 12 4 5 LD0
ROMA1 P7
182 81 10 11
ROMA2 P8
183 82 SRN22
ROMA3 65550-B P9
185 ROMA4 P10 83 QPRN-R27C15 LD[0..3]
187 84 U2
ROMA5 P11
189 85 1 20 RP3
ROMA6 P12
191 86 2 19 1 8 SUD3
192 ROMA7 P13 87 3 18 2 7 SUD2
ROMA8 P14
190 88 4 17 3 6 SUD1
ROMA9 P15
186 5 16 4 5 SUD0
ROMA10
SB 188 ROMA11 MCD0 106 6 15
G1 193 107 Y0 7 14 SRN22
ROMA12 MCD1
1 2 194 109 Y1 8 13 RP4
ROMA13 MCD2
196 110 Y2 9 12 1 8 SUD7
ROMA14 MCD3
GAP-CLOSE 195 ROMA15 MCD4 111 Y3 10 11 2 7 SUD6
197 112 Y4 3 6 SUD4
ROMA16 MCD5
RGBGND 198 113 Y5 QPRN-R27C15 4 5 SUD5
ROMA17 MCD6
200 114 Y6
ROMOE# MCD7 115 Y7
MCD8 SRN22 SUD[0..7]
199 116 UV0
A20 MCD9
117 UV1
MCD10
1 $VGACLK 201 CLK MCD11 118 UV2 Y[0..7] 1
28 119
A23 MCD12
29 120 UV3
1 PERR# PERR# MCD13
30 121 UV4
1 SERR# SERR# MCD14 122 UV5
MCD15
203
1 $VGA_14M REFCLK
204 101
(RESERVED) RASC#
154 103 UV7
1 @32K2 178 32KHZ CASCH# 104 UV6
1 STNDBY# STNDBY# CASCL#
102
WEC#
53 100
1 DDC_DATA ACTI OEC# UV[0..7] 1
R17 1 DDC_CLK 54 ENABKL ZV_PCLK ZV_PCLK 1
1 2 R18 70 55
4 SHFCLK SHFCLK RSET
1 2 R19 69
4 MOD M
10R3 1 2 R20 68 60 R
4 LP 1 2 67 LP R 58 G CRT_R 1
4 LFS 10R3 FLM G CRT_G 1
10R3 62 57 B
ENAVDD B CRT_B 1
10R3 61 65 HSYNC
ENAVEE HSYNC CRT_HS 1
C35 64 VSYNC
SC33P C37 VSYNC CRT_VS 1
C34 SC33P M MM CC 1 1 1
A AA A A AA A A AA A AA A A AA A AA A A AA A A AA A A A H A B B BB G GG D D I I GG
SC47P C36 C33 D DD D D DD D D DD D DD D D DD D DD D D DD D D DD D D D C C CC C C CC CR G G G GG N N N G G GG NN R5 R6 R7
SC33P SC47P 0 00 0 0 00 0 0 01 1 11 1 1 11 1 12 2 2 22 2 2 22 2 3 3 A A AA A A AA AE N N N NN D DD N N NN DD 75R3 75R3 75R3
0 12 3 4 56 7 8 90 1 23 4 5 67 8 90 1 2 34 5 6 78 9 0 1 0 1 23 4 5 67 8F D D D DD A BC D D DD 01
CT65550 2 2 2
5 5 44 4 4 44 4 4 33 3 33 3 2 11 1 11 1 1 9 9 9 99 9 99 9 9 5 1 2 35 1 1 18 6 71 2 2
1 0 98 7 6 54 1 0 87 6 54 3 0 98 7 65 4 3 87 6 5 43 2 1 0 1 2 34 5 67 8 9 6 2 6 92 6 3 09 3 78 0 0
1 9 5 4 2 8
5 ENAVDD
A A A AA A A AA A AA A A AA A A AA A A AA A A AA A AA A 1
D D D DD D D DD D DD D D DD D D DD D D DD D D DD D DD D R8 RGBGND
0 1 2 34 5 6 78 9 11 1 1 11 1 1 11 2 2 22 2 2 22 2 23 3 560R3
1 ENAVEE
01 2 3 45 6 7 89 0 1 23 4 5 67 8 90 1 RGBGND RGBGND
Z Z 2
1 AD[0..31]
RP2 V V
R0 5 4 U1 _ _
4 R[0..7] R1 6 3 11 10 V H
R2 7 2 12 9 RGBGND
SRN22 QPRN-R27C15
VGA CONTROLLER
C42
C30
SCD1U U12
SCD1U U11
1 44
VMAD0 VCC VSS VMAD15 1 44 VMAD15
2 43 VCC
VMAD1 DQ0 DQ15 VMAD14 VMAD0 2 VSS 43 VMAD14
3 42 DQ0
VMAD2 DQ1 DQ14 VMAD13 VMAD1 3 DQ15 42 VMAD13
VMAD3 4 41 DQ1
5 DQ2 DQ13 40 VMAD12 VMAD2 4 DQ14 41 VMAD12
DQ3 DQ12 DQ2 DQ13
6 39 VMAD3 5 40
VMAD4 VCC VSS VMAD11 DQ3 DQ12
7 38 6 39 VMAD11
VMAD5 DQ4 DQ11 VMAD10 VCC VSS 38
8 37 VMAD4 7 DQ4 VMAD10
VMAD6 DQ5 DQ10 VMAD9 VMAD5 8 DQ11 37
9 36 DQ5 VMAD9
VMAD7 DQ6 DQ9 VMAD8 VMAD6 9 DQ10 36 VMAD8
10 35 DQ6
DQ7 DQ8 VMAD7 10 DQ9 35
11 34 DQ7
N.C N.C 11 DQ8 34
12 N.C N.C 33 N.C N.C
13 32 12 33
N.C N.C N.C N.C
14 31 CASAL# 13 32 CASAL#
N.C LCAS CASAL# 2 N.C N.C 31
WEA# 15 30 CASAH# 14 N.C CASAH#
2 WEA# RASA# WE UCAS OE# CASAH# 2 WEB# LCAS 30
16 29 15 WE OE#
2 RASA# RAS OE VAA8 VRAMOE# 2 RASB# UCAS 29 VAA8
17 28 16 RAS
VAA0 N.C A8 VAA7 17 OE 28 VAA7
18 27 N.C
VAA1 A0 A7 VAA6 VAA0 18 A8 27 VAA6
19 A1 A6 26 A0 A7
VAA2 20 25 VAA5 VAA1 19 26 VAA5
A2 A5 A1 A6
VAA3 21 24 VAA4 VAA2 20 25 VAA4
A3 A4 VAA3 A2 A5 24
22 23 21
VCC VSS A3 A4 23
22
VCC VSS
M5M44256 M5M44256
VMAD[0..15]
VRAMVCC
2
VRAMVCC
C39
SCD1U U10
C31
1 44 SCD1U U5
VMBD0 VCC VSS
2 43 VMBD15
VMBD1 DQ0 DQ15
3 42 VMBD14 1 VCC VSS 44
VMBD2 4 DQ1 DQ14 41 VMBD13 VMBD0 2 43 VMBD15
VMBD3 DQ2 DQ13 DQ0 DQ15
5 40 VMBD12 VMBD1 3 42 VMBD14
DQ3 DQ12 DQ1 DQ14
6 39 VMBD2 4 41 VMBD13
VMBD4 VCC VSS VMBD3 5 DQ2 DQ13 40 VMBD12
7 38 VMBD11 DQ3 DQ12
VMBD5 8 DQ4 DQ11 37 VMBD10 6 39
VMBD6 DQ5 DQ10 VCC VSS
9 36 VMBD9 VMBD4 7 38 VMBD11
VMBD7 DQ6 DQ9 DQ4 DQ11
10 35 VMBD8 VMBD5 8 37 VMBD10
DQ7 DQ8 VMBD6 9 DQ5 DQ10 36 VMBD9
11 N.C N.C 34 DQ6 DQ9
12 33 VMBD7 10 35 VMBD8
N.C N.C DQ7 DQ8
13 32 11 34
N.C N.C N.C N.C
14 31 CASBL# 12 N.C N.C 33
WEA# 15 N.C LCAS 30 CASBH# 13 32
RASA# WE UCAS N.C N.C
16 29 OE# 14 31 CASBL#
RAS OE N.C LCAS CASBL# 2
17 28 VAA8 WEB# 15 30 CASBH#
VAA0 N.C A8 2 WEB# RASB# 16 WE UCAS 29 OE# CASBH# 2
18 27 VAA7 2 RASB# RAS OE
VAA1 19 A0 A7 26 VAA6 17 28 VAA8
VAA2 A1 A6 N.C A8
20 25 VAA5 VAA0 18 27 VAA7
VAA3 A2 A5 A0 A7
21 24 VAA4 VAA1 19 26 VAA6
A3 A4 VAA2 20 A1 A6 25 VAA5
22 VCC VSS 23 A2 A5
VAA3 21 24 VAA4
A3 A4
S256K16-60 22 23
VCC VSS
2
M5M44256
2M VRAM
)
R[0..7]
SUD[0..7]
2 CN1
1 1
R2 2 80 R13
2
CLK 79 1 2 LFS
3 2
R15 78
10R3 4 R0
1 2 77 22R3
NF1 5
76 R3
R1 6
STC222B 22R3 75
7
1 2 C3 74
R2 R4
73 8
9
3 SC47P R5 72 R7
10
SB 71
11
R6 70 SUD3
12
69
13
SUD2 68 SUD0
14
67
15
66
2 LP SUD1 16 SUD7
65
17
64
SUD6 SUD4
63 18
19
SUD5 62
20
61 UD3
21 2
60
22
59
2 UD2 23 UD0 2
58
24
57
2 UD1 25 LD3 2
56
55 26
2 LD2 LD1 2
27
54 +5V
28
53 LD0 R14
29 2
52 1 2 MOD
30 2
51 1 R1
31
50 22R3
32 LCDVEE 1 LCDPWR
1 49 100KR3
33
R16 48
34
47 2
0R3 LCD_3/5V#
46 35
LCD_3/5V#
36 5
2 45
37
44
38
43
39
42 C1 C26
41 40 SC10U16V SCD1U
JAE-CONN80C
+3.3V
+3.3V
CP1
R0 10 1 C51
R1 9 2 R4 1U13A SCD1U 1 U13B
R2 8 3 R5 4 4
R3 7 4 R6 1
4
6 5 R7 2 3
DISPLAY 1
SRP1K-2
7SSHC04 7 SSHC04
CP2
SUD0 10 1 LVC ,VHC OR LCX
SUD1 9 2 SUD4
SUD2 8 3 SUD5
SUD3 7 4 SUD6
6 5 SUD7
SRP1K-2
CP3
UD0 10 1
UD1 9 2 LD0
UD2 8 3 LD1
UD3 7 4 LD2
6 5 LD3
SRP1K-2
LCD I/F
CHIP CAPACITOR
1 U9D 1 U9A
4 4
11 2
13 1
12 3
7 SSHC02 7 SSHC02
DVCC
Close 105(MGNDC),108(MVCCC) PIN
+3.3V +5V
+5V
VRAMVCC R31
1 2 +3.3V
LCDPWR U6
SI9706DY
0R3
U9B 2 7
1 VCC 5VIN
C14 C11 C20 4 3 6
VCC 3.3VIN
SCD1U SC10U16V SC10U16V +3.3V C27 5
SCD1U 4 5 G 8
R32 S1 SR
6 4 N
1 2 S2 D
DUMMY-R3 7 SSHC02
1
CVCC1
VGAPWR R26
1 2 +3.3V
NOT INS.
+3.3V
C32 33R3 C24 C47 C46 1 U13C
SCD1U SC10U16V SCD1U SCD01U 4 1 U9C
4
5 6 8
2 ENAVDD
RGBGND CVCC0 10
R25 9
1 2 7 SSHC04
7 SSHC02 DVCC U8
C45 33R3 C23 C21 C22 SI9706DY
SCD1U SC10U16V SCD1U SCD01U 2 7
VCC 5VIN
3 6
VCC 3.3VIN
LVC , VHC OR LCX
AVCC 5 G 8
RGBGND S1 SR
L4 4 N
S2 D
1 2 +3.3V +3.3V
U13E U13D 1
HF70ACB C7 C9 C8 1 1
SC10U16V SCD1U SCD01U 4 4
11 10 9 8
LCDPWR
LCD_3/5V# ENAVDD S1 S2
0 0 0 0
0 1 1 0
1 0 0 0
1 1 0 1
VOLTAGE SWITCH
DK_PJIN#
SC100P25V3KN
CN2
C3 C5
)
L4 SC100P25V3KN 1
LINE_OUT_L 1 2 2
3
L5 HF70ACB 4
LINE_OUT_R 1 2 5
HF70ACB
PH-JK11
C4 C6
AUD_GND
SC100P25V3KN
1
SC1000P50V3JN
SC100P25V3KN R3 C7
AD+
JK1 4
2
TR6
2 SC1000P50V3JN
3
2 C2
1 1 3 10KR3
4
C17 SBT-0308W C1
MOJ-D21
SCD1U
SCD1U
SC100P25V3KN
C11
C9 CN1
L1
DK_LINEIN_L 2
1 SC100P25V3KN 1
2
3
DK_LINEIN_R 1 L2 2 HF70ACB 4
5
HF70ACB
C10 C12 PH-JK11
AD+ AUD_GND
SC100P25V3KN
SC100P25V3KN
CN4
LINE_OUT_L 2 1
4 3 +5V
LINE_OUT_R 6 5
8 7
DK_LINEIN_L 10 9
DK_LINEIN_R 12 11 DK_PJIN#
14 13
DK_MIC 16 15 +5V
DK_MIC_PJIN 18 17
20 19
SC100P25V3KN R2
HRS-CONN20D
C16 1
SCD1U 100KR3
AUD_GND HF70ACB 2
MOLEX-CON16
+5V
LED6
R5 STANDBY_LED
1 2 1 2
1KR3 LED-G
STANDBY LED
SW1 1
+5VSB
COVER_SW LED4
3 R6 CHARGE_LED
1 2 1 2
2
SW-SPVE1 1KR3 LED-G
CHARGING LED
+5V
LED5
R2 HDD/FDD_LED
1 2 1 2
4 2
SKQGAB
;----------------------------------------------------------------------------
; Make sure we entered POST in real mode
; Determine the CPU type
; Convert all segment limits to 4GB
;----------------------------------------------------------------------------
002H post Verify Real Mode
004H cpu Get Type J
006H post Hardware Initialize
024H postSetHugeESJ
;----------------------------------------------------------------------------
; Initialize the chipset
; Set the in-POST flag
; Autosize the RAM
; Clear the base RAM
; Test the base RAM
; Autosize the cache
; Shadow the BIOS
;----------------------------------------------------------------------------
008H cs Initialize
011H post Reg Initialize J
00EH io Initialize OPTIONAL
00CH cache Initialize
016H post Checksum Test
018H post Timer Init
017H cache Pre Ram Auto size, OPTIONAL
028H cs Ram Auto size
03AH cache Auto size
02AH post Zero Base Ram
02CH post Real Address Test
030H post Base Ram Test
02FH cache Pre Sys Shadow OPTIONAL
038H cs System Shadow Config
020H post Refresh Test, FAR
009H post Set In Post Flag, FAR
;----------------------------------------------------------------------------
; Initialize all the hardware to a known state
;----------------------------------------------------------------------------
00AH cpu Initialize
00BH cpu Cache On
00FH fdiskInitializeJ
010H pmInitializeJ, OPTIONAL
;----------------------------------------------------------------------------
; Perform hardware tests, and further initialization
;----------------------------------------------------------------------------
014H post I8742 Init, FAR
;----------------------------------------------------------------------------
; Test the keyboard controller
; Compute the CPU clock speed
; Test the CMOS RAM
;----------------------------------------------------------------------------
022H post I8742 Test, FAR
032H post Compute Speed, FAR
034H post Cmos Test, FAR
;----------------------------------------------------------------------------
; Optimize chipset timing
; Optimize other hardware
;----------------------------------------------------------------------------
03CH cs Adv Config
03DH post Adv Reg Config, OPTIONAL
;----------------------------------------------------------------------------
; Initialize interrupt vectors
; Make sure ROM copyright notice is intact
; Check for configuration errors
; Initialize the video
; Shadow the video
; Display the copyright notice
; Display the CPU type
; Initialize EISA bus
; Set segment limits back to 4GB (PCI code may have changed them)
;----------------------------------------------------------------------------
042H post Vector Init, FAR
046H post Copyright Check, FAR
047H pci Op Rom Init
049H pci Init
048H post Config Check, FAR
04AH pci Video Init
04CH cs Video Shadow Config
024H postSetHugeESJ
;----------------------------------------------------------------------------
; Test and initialize the keyboard
; Check for unexpected interrupts
; Display prompt "Press F2 to enter SETUP"
;----------------------------------------------------------------------------
052H post KB Test, FAR
054H feat Setup Keyclick, OPTIONAL, FAR
076H post Keyboard Test, FAR
058H post Hot Interrupt Test, FAR
;----------------------------------------------------------------------------
; Initialize QuietBoot if it's installed
; Note: Both the keyboard and timer interrupts (IRQ0 and IRQ1) are enabled
; here. Also, interrupts are enabled here and run through the end
; of POST. If your POST task requires interrupts to be off, please
; preserve them by doing a PUSHF, CLI at the beginning and a POPF at
; the end. If you change the PIC, please preserve existing bits.
; Display the copyright notice
; Display the CPU type
; Initialize EISA bus
;----------------------------------------------------------------------------
; Disable the CPU cache
; Size and test the system memory
; Size and test the extended memory
; Test extended memory address lines
; User hook # 1
;----------------------------------------------------------------------------
05BH cpu Cache Off
05CH post Memory Test, FAR
060H post Extended Memory Test, FAR
062H post Extended Address Test, FAR
064H user Patch1
;----------------------------------------------------------------------------
; Enable and configure the cache
; Display the cache size if a cache was detected and enabled.
; Display size of shadow RAM, size of non-disposable BIOS
;----------------------------------------------------------------------------
066H cache Adv Config
068H cache Configure
06AH post Display Cache Size, FAR
06CH post Display Shadows, FAR
06EH post Display Non Disposable, FAR
;----------------------------------------------------------------------------
; Display any POST errors
; Check for configuration errors
; Test Real Time Clock
; Check for keyboard errors
;----------------------------------------------------------------------------
070H post Display Error Messages, FAR
072H post Test Config, FAR
074H post RTC Test, FAR
;----------------------------------------------------------------------------
; Set up hardware interrupt vectors
; Test coprocessor if present
; Return to standard real mode
;----------------------------------------------------------------------------
07CH post Setup Hardware Vectors, FAR
07EH cpu Coprocessor Test, FAR
096H post Clear Huge ES
;----------------------------------------------------------------------------
; Disable programmable I/O devices
; Detect and install fixed RS232 ports
; Detect and install fixed parallel ports
; Init PC-compatible PNP & PCI devices (COM, LPT, floppy, etc.)
; Re-enable programmable I/O and check for conflicts with fixed I/O
;----------------------------------------------------------------------------
post Shutdown Eight Table LABEL post Proc
;----------------------------------------------------------------------------
; Initialize Bios Data Area and Extended Bios Data Area
; Initialize hard and floppy disk controllers
; Initialize MP Environment
;----------------------------------------------------------------------------
;----------------------------------------------------------------------------
; Scan for BIOS ROM extensions
;----------------------------------------------------------------------------
098H pci Rom Area Check
;----------------------------------------------------------------------------
; Set up Power Management
; Enable hardware interrupts
; Set time
; Check for key lock
; Init typematic rate
;----------------------------------------------------------------------------
09CH pm Setup, OPTIONAL
09EH post Enable IRQs, FAR
0A0H post Set Time Of Day, FAR
0A2H post Key Lock Test, FAR
0A4H feat Init Keyboard Rate, OPTIONAL, FAR
;----------------------------------------------------------------------------
; Erase F2 prompt
; Check to see if F2 key was pressed
; Optionally print "Press F1 or F2" prompt, and/or enter SETUP
;----------------------------------------------------------------------------
0A8H post Erase F2 Msg, FAR
0AAH post Scan For F2, FAR
0ACH post Setup Check, FAR
;----------------------------------------------------------------------------
; Clear the In Post flag
; Check for errors
; Prepare to boot
; Beep once
; Optionally check password
;----------------------------------------------------------------------------
0AEH post Clear Boot Flag, FAR
postSegment ENDS