Documente Academic
Documente Profesional
Documente Cultură
OPERATOR STATION
Rear Pull Down Sun Shade The utility tray contains an additional beverage holder and a
storage platform in which to place papers and other materi-
als.
Order From Bundle Description
EPDC RE162644 Utility Tray and Beverage Holder.
The kit additionally features a battery security system pre- Step Mud Guards
venting accidental discharge while the box is still connected
to the cabin’s 12-volt cigarette lighter outlet without the
engine running. The box can be easily removed for cleaning
or for movement between machines.
Order From Bundle Description
EPDC MC900001 Refrigerated Cool Box
LIGHTING
PERFORMANCE MANAGEMENT
Dual Beam Radar Sensor Additionally, the radar improves the accuracy of the follow-
ing CommandCenter readouts:
• Area covered
• Area / hour
• Distance and ground speed
The new Dual Beam sensor offers several advancements
over previous designs:
• Dual-beam design ensures signal strength to minimises
interference caused by hard surfaces or tall grass
• Heavy-gauge mounting bracket and rubber isolators
minimise vibration
• Fast update rate closely matches the actual ground
speed. Important where the radar speed input is used to
control spayers, balers, etc.
• Self-calibrating function to minimise setup time.
Order From Bundle Description
Dual Beam Radar Sensor Kit (not UK).
EPDC RE243242
The Dual Beam Ground Speed Radar Sensor activates func- Requires mounting bracket.
tions contained within the CommandCenter and cornerpost Dual Beam Radar Sensor Kit (for UK
displays by allowing the tractor to reliably calculate the EPDC RE218823 only).
actual ground travel speed independent of wheel speed. The Requires mounting bracket.
radar needs to be installed in order to utilise the hitch slip Radar Mounting Bracket Kit
command or to calculate actual wheel slip. EPDC RE250705 Required for Installation of Dual Beam
Radar Sensor
Issue 10-2007 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7030 Series Tractors-9
9-Pin Implement Feedback Connector for The feature allows the operator to adjust height and depth of
TouchSet Depth Control remote lift cylinders by using the TouchSet controls in the
cab.
Order From Bundle Description
9-Pin Connector Implement Feedback.
Required for Touch-Set Depth Control.
EPDC RE58827
Only compatible with Electro-Hydraulic
(EH) hydraulic systems.
Implement Switch
(8020 shown)
Mounts on the implement and monitors when the implement
The 9-pin implement feedback connector required for
is raised or lowered. When used in conjunction with the
TouchSet depth control of implements is available as a field-
Radar Sensor and Performance Monitor gives 100% accu-
installed attachment on tractors with EH-SCV’s. The con-
rate hectare coverage.
nector and wiring harness enables a position input to be pro-
vided to the tractor’s Electronic Selective Control Valve Order From Bundle Description
(SCV) control unit enabling TouchSet depth control func-
Implement Switch with 3m (10 Ft.)
tionality through the first SCV. EPDC RE21519
Harness.
AG MANAGEMENT SOLUTIONS
Parallel Tracking Parallel Tracking kits are available from AMS Europe using
JDmint. Dealers are free to source the remaining GreenStar
Common Components and a subscription to the StarFire SF!
or SF2 differential correction signal required to form a func-
tional system through using existing customer-owned items
or by sourcing from AMS Europe and StellarSupport
respectively.
For further code details, please refer to the AMS Sales Man-
ual and Price Pages.
ENGINE
Rear PTO Shaft Adapter (44.5mm to • 44.5mm shaft is capable of the tractor’s full PTO power
34.9mm) • Use of the 34.9mm shaft is governed by the power
requirement of the implement:
- 21-spline end is intended for implements requiring
less than 150 PTO hp
- 6-spline end is intended for implements requiring
less than 75 PTO hp
Order From Bundle Description
Conversion Kit from 44.5 mm (1-3/4
In.) 20-spline shaft to 34.9 mm (1-3/8
In.) 6/21-spline shaft.
EPDC RE272736
Models 7830 and 7930 only.
Conversion for tractor equipped with
Code 2417.
The conversion kit for 7830 and 7930 tractors that were
originally equipped with the 44.5mm (1-3/4 In.) 20-spline
PTO shaft only (Code 2417) replaces the existing shaft to
provide compatibility with 34.9 mm 540 rpm (6-spline) and
1000 rpm (21-spline) implements. PTO rpm speeds can be
utilised independently of the shaft type.
Air Brakes - Single Line • A large volume Air Brake Reservoir is located adjacent
to the external muffler. A low-pressure warning is
indicated within the CommandCenter.
Order From Bundle Description
Trailer Brake, Single Line Air Coupler
Kit
EPDC RE250536 Requires Dual Line Air Brakes: Factory
Option Code 9010 or Field Bundle
RE246762
Pick up Weight - 900 kg • Please refer to your Operator’s Manual for more details
regarding correct ballasting and weight distribution
guidelines.
Order From Bundle Description
EPDC AL112166 Pick up weight, 900 kg
EPDC AL113121 Center link bracket for pick up weight
(8020 shown)
The attachment kit includes 20 Quick Tatch weights, each
weighing 50 kg.
• Please refer to your Operator’s Manual for more details
regarding correct ballasting and weight distribution
guidelines.
OrderFrom Bundle Description
Weight Set, 1000 kg
EPDC AL71258 Requires Mounting Hardware - see
following.
When mounting cast weights on the outside of the wheel, a OrderFrom Bundle Description
75 kg weight should first be mounted. Up to three, 205 kg
Steel Wheel Rim for fitment of 620/
weights can then be added per side. The first 75 kg weight is EPDC RE208548
70R42 or 650/65R42 tyres (Qty 1)
required to allow clearance to the gear for the rack and pin-
Steel Wheel Rim for fitment of 620/
ion when changing tread settings. Mounting the 205 kg EPDC RE208544
weights directly to the rear wheel otherwise requires remov- 70R46 tyres (Qty 1)
ing the weights when adjusting tread width. Steel Wheel Rim for fitment of 710/
• Please refer to your Operator’s Manual for more details EPDC RE208543 70R38, 650/85R38 or 650/75R38 tyres
regarding correct ballasting and weight distribution (Qty 1)
guidelines. Steel Wheel Rim for fitment of 800/
EPDC RE208540 70R38 tyres (Qty 1)
OrderFrom Bundle Description 100 mm axle only.
CG R167153 Rear Wheel Weight, 75 kg (Qty 2) Note: Tyre load carrying capacities must be observed.
CG R207782 Rear Wheel Weight, 205 kg
Note: Mounting hardware required. See Parts
Catalogue. Rims for Heavy Duty Cast Wheel
OrderFrom Bundle Description • Provides extra clamping force for hub to axle.
Wheel Rim for fitment of 320/90R54 Order From Bundle Description
EPDC RE161991
tyres
Drive Wheel Hardware for Cast Wheel.
Wheel Rim for fitment of 380/90R50 EPDC AR219840 Hardware for cast hub to be used when
EPDC RE172186
tyres clamp-on duals are used.
Wheel Rim for fitment of 380/90R50 Drive Wheel Hardware for Steel Wheel
EPDC RE172896 tyres with Cast Hub.
174.8 mm offset CG AR219841
Hardware for cast hub to be used when
Wheel Rim for fitment of 480/80R46, clamp-on duals are used.
EPDC RE175533
18.4R46 or 520/85R46 tyres
Wheel Rim for fitment of 520/85R42 or
EPDC RE175484
20.8R42 tyres Heavy Duty Dual Wheel Kit
Wheel Rim for fitment of 520/85R42,
EPDC RE176459
20.8R42 or 580/70R42 tyres
Wheel Rim for fitment of 620/70R42 or
EPDC RE176460
650/65R42 tyres
Wheel Rim for fitment of 650/75R38,
EPDC RE166180
710/70R38 or 650/85R38 tyres
Wheel Rim for fitment of 900/50R42
EPDC RE175489 tyres
0 mm offset
Wheel Rim for fitment of 480/80R50
EPDC RE164038 tyres
Wheel Rim for fitment of 620/70R46
EPDC RE174387
tyres
Wheel Rim for fitment of 710/70R42 For heavier draft applications requiring the use of rear dual
EPDC RE224262 tyres wheels, customers should utilise a fixed hub kit that is avail-
100 mm axle only able for field installation. The fixed hub Heavy Duty Dual
Wheel Rim for fitment of 800/70R38 Wheel Kit is better equipped to reliably transmit the trac-
EPDC RE171073 tyres tor’s power than simple clamp-on designs that are intended
0 mm offset for lighter duty use only.
Note: Tyre load carrying capacities must be observed. Order the following list of parts - wheel rims can be seen
above.
Drive Wheel Hardware for Clamp-on Dual Order From Part No. Qty Description
Usage EPDC R192506 2 Dual Hubs
EPDC R212196 2 Clamp rings
EPDC AR190666 2 Hub Extension 254mm
EPDC R52006 20 Washers
EPDC R111434 40 Cap Screw MJ22x130
EPDC R113692 20 Spacer, Hardened
EPDC R182940 4 Cap Screw, Hex Socket Head
EPDC 34M7275 8 Pin, Spring
Hardware kits for both the Regular Duty Steel Wheel with
Cast Hub and for the Heavy Duty Cast Rear wheels are to be
used when using clamp on duals:
Issue 10-2007 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7030 Series Tractors-19
HYDRAULICS
Rear Selective Control Valve Equipment SCV’s) and AutoPowr- (EH-SCV’s) equipped tractors.
Order From Bundle Description
Third Mechanical Rear Remote
Cylinder Control Valve with Breakaway
EPDC RE211613
Couplers and High Pressure Relief
Lever.
Fourth Mechanical Rear Remote
Cylinder Control Valve with Breakaway
EPDC RE211615 Couplers and High Pressure Relief
Lever.
Fourth EH Rear Remote Cylinder
EPDC RE211617 Control Valve with Breakaway Couplers
and High Pressure Relief Lever.
3 In 1 Hitch Equipment able for field installation. The 3-in-1 rails, auto coupling
Wagon Hitch, Piton Fix and Ball type hitches and the Regu-
lar Cat 2 drawbar (see later) can be supplied.
Order From Bundle Description
3 in 1 Hitch Rails for Type 1 or 2 (1-3/
CG RE217497 8”) PTO.
For Model 7730 only.
3 in 1 Hitch Rails for Type 3 (1-3/4”)
CG RE217498 PTO.
For Model s 7830 and 7930 only.
Ball Hitch for 3-in-1 rails.
EPDC AL162257 Requires Code 2719 or Field
Attachments RE217497 or RE217498.
Piton Fix Hitch for 3-in-1 rails.
EPDC AL162256 Requires Code 2719 or Field
Attachments RE217497 or RE217498.
Kit, Wagon Hitch (Automatic Coupling).
EPDC AL160390 Requires Code 2719 or Field
Attachments RE217497 or RE217498.
Kit, Wagon Hitch (Manual Coupling).
To fulfil the future hitch equipment demands of customers, a EPDC AL160393 Requires Code 2719 or Field
number of the 3 in 1 hitch design components are also avail- Attachments RE217497 or RE217498.
Issue 10-2007 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7030 Series Tractors-24
Pickup Hitch The Cat 3 drawbar (shown) can be installed to extend capa-
bilities over the ex-factory Cat 2 version. Key specifications
are as so:
• Towable load (assisted braking): 14T (Cat 2: 11.5T).
• Vertical Load (fully retracted): 3000daN (Cat 2: 2800
daN)
• Drawbar Pin - 1.5-in. diameter (Cat 2: 1.25-in.)
• Drawbar dimensions - 2-in. thick x 3-in. wide (Cat 2:
1.5-in. x 3-in.)
Tractors equipped with the taller Group 48 rear tyre sizes
can utilise a Dropdown Drawbar Kit to maintain level
implement hitching and improve drawbar / implement com-
patibility.
Order From Bundle Description
Category 2 Drawbar Kit with 1-1/4”
EPDC RE194407 (31.75mm) Quick Drop Pin.
Category 3 Drawbar Kit with 1-1/2”
CG RE211553
(38mm) Quick Drop Pin
Dropdown Drawbar Kit, Cat. 2.
EPDC RE211559
Requires Group 48 Tyres.
The Pickup Hitch with Drawbar allows for fast one-man Hydraulic Centre Link
hitching of twin axle trailers or trailed implements requiring
close-coupled hitch points:
• Hydraulically coupled and controlled in-cab using first
SCV.
The hitch includes both a Cat 2 drawbar and hook.
Order From Bundle Description
Pickup Hitch for Type 1 or 2 (1-3/8”)
CG RE211561 PTO.
For Model 7730.
Pickup Hitch for Type 3 (1-3/4”) PTO.
CG RE219845 For Models 7830 and 7930.
Drawbar Equipment
Front Hitch Solutions For further details of specifications and availability, please
refer to the 7020 MIB 2004-07.
STORAGE
Storage Container - 45 l The volumous sheet metal storage container can carry up to
45kg of gear and includes side handles for easy movement
between machines. A quick lock pin secures the container
lid.
Order From Bundle Description
Storage container, 45 l
EPDC AL120005
Max. 45kg payload
VANDALISM PROTECTION