Documente Academic
Documente Profesional
Documente Cultură
Models 1A, 1C, 1D, 1G, 1H, 1P, 1V and 1Z. Fasteners & Exterior covers are stainless steel.
Housing per NEMA 4, 4x and 13. Stainless Steel Pressure Ports available (thru 5000 psi range).
11 amp UL Recognized Microswitch standard. Extremely rugged/precision machined from solid aluminum
5 amp UL Recognized Microswitch also available. extrusions/stainless steel bar stock on state of the art CNC lathes
and machining centers.
Watertight Industrial Connector DIN 43650/IP65.
Available also are models with 18 inch freeleads. Internal slotted wheel adjustment wheel (for use of
screwdriver)
Laser Engraved Markings including range scale.
SENSOR MODEL SELECTION TABLE HOW TO ORDER
Base Range ID Switch Adjustment Range Dead Band Approximate Max System Proof Test To order a pressure switch that will meet
your requirements, specify a model by
Model Number psig kPa/Mpa psig kPa/Mpa psig Mpa psig Mpa
and
.43 15-200 103-1.38 2.0-15 14-103 1000 6.89 1250 8.61 may not be immediately available.
.53 50-450 345-3.1 5.0-30 34-207 1500 10.34 3000 20.67
Consult factory.
.62 50-1000 345-6.89 10-50 69-345 2000 13.78 5000 34.45
1G
.63 100-1750 689-12.1 15-100 103-689 3000 20.67 5000 34.45 EXAMPLE: 1G 11 N1 . 43
43
.01 2-15 14kPa-103kPa 0.2-2.0 1kPa-14kPa 500 3.45 1000 6.89
1C
.03 5-75 34-517 0.5-6.0 3-41 750 5.17 1000 6.89 1G 11 N1
.43 15-200 103-1.38 2.0-15 14-103 1000 6.89 1250 8.61
and Switch Adjustment Range, Choose
.53 50-450 345-3.1 5.0-30 34-207 1500 10.34 3000 20.67
the range from "Switch Adjustment
.62 50-1000 345-6.89 10-50 69-345 2000 13.78 5000 34.45
1Z Range" Column (See Table 1) and
.63 100-1750 689-12.1 15-100 103-689 3000 20.67 5000 34.45
.64 200-2500 1.3Mpa-17.2Mpa 20-150 138kPa-1.0Mpa 3000 20.67 5000 34.45 enter the range ID Number.
1C
.83 400-4000 2.76Mpa-27.6Mpa 75-450 516kPa-3.1MPa 5000 34.5 10000 68.9 LTR MTL Port Size
1H
.84 500-5000 3.45-34.5 75-500 516.3.4 7500 51.7 10000 68.9
A AL 1/2-14 NPT
0.71 100-1800 689-12.4 25-125 172-861 5000 34.5 10000 68.9
C 316SS 1/4-18 NPT
.72 200-2500 1.38-17.2 30-150 207-1 5000 34.5 10000 68.9
1P D AL 1/4-18 NPT
.73 350-3250 2.41Mpa-22.4Mpa 50-350 345kPa-2.4Mpa 7500 51.7 10000 68.9
0.74 350-4250 2.41-29.3 80-350 551-2.4 7500 51.7 10000 68.9 G AL 1/4-18 NPT
H 316SS 1/4-18 NPT
P AL 1/4-18 NPT
(1) SEE HOW TO ORDER SECTION The differential or deadband fixed and varies with the pressure setting. Z 316SS 1/2-14 NPT
Typical Model No.: 1G10N1.12 (18” Freeleads) Typical Model Number: 1G11N1.14
(As shown with DIN 43658 / IP65 Connector)
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net
Pressure Switches, Inc.
Vacuum Switch
The Series 1 Vacuum Switch has all the
standard features of a Series 1.
Vacuum Range: 1-28 Inches Hg
Terminal Strip
Dimensions
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net
Pressure Switches, Inc.
Models 2A, 2C, 2G, 2P and 2Z. Laser engraved markings including Extremely rugged/precision
range scale. machined from solid alminum
Housing per NEMA 4, 4x and 13. extrusions/stainless steel bar stock on
Fasteners are stainless steel. state of the art CNC lathes and
11 amp UL Recognized Microswitch machining centers.
standard. Optional gold plated Models may be factory set, consult
contacts and 5 amp UL Recognized factory. Internal slotted adjustment wheel (for
Microswitch also available. use of screwdriver).
Ambient temperature range: -30F to
Watertight Industrial Connector DIN 160F, -34C to 71C. Underwriters Laboratories Inc. listing
43650/IP65. Also available are file no. 185005 for NKPZ - Motor
models with 18 inch freeleads, Stainless steel pressure ports Controllers, Float & Pressure
MIL-C-5015 connectors or multi available. Operated. NKP27 - Motor Controllers,
conductor cable. Float & Pressure Operated Certified
for Canada.
(1) SEE HOW TO ORDER SECTION The differential or deadband fixed and varies with the pressure setting.
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net
Pressure Switches, Inc.
ELECTRICAL RATINGS (ALL UNITS SPDT) HOW TO ORDER
11A (RES/IND) - 1/4 HP @ 125 OR 250 VAC To order a pressure switch that will
5A RES, 3A IND @ 28 VDC meet your requirements, specify a
.5A RES @ 125 VDC model by using the chart below. All
Optional: 100mA @ 125 VAC, 0.250A @ 6 VDC configurations may not be immedi-
ately available. Consult factory.
APPLIANCE PLUG EXAMPLE: 2P 10 N9 . 71
Four pole industrial power connector per
P 2P 10 N9 71
DIN43650 specifications, when used with
rubber compression gland, offers protection
2 Switch Adjustment Range, Choose
against dust and hosedown conditions (IP 65 3 the range from "Switch Adjustment
Protection Mode). Can be indexed four 1 Range" Column (See Table 1) and
enter the range ID Number.
directions. CSA approved, UL recognized. Nitrile 0-Ring Polymide
N1
Diaphram
FREELEADS
Viton 0-Ring Polymide
F1
Diaphram
Viton 0-Ring Stainless Steel
F2
Diaphram
Approximately 18 inch long, 18 AWG Nitrile 0-Ring SST Piston
N9
UL1015 aapliance wire. Teflon Diaphram (P Only)
10 18" Freeleads
11 DIN 43650/IP65 Connector
Liquid Tight Connector W/Multi
16 Conductor Cable
DIMENSIONS NOTE:
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net
Pressure Switches, Inc.
The PSI ‘Hardhat Series’
Models 6A, 6C, 6G, 6H, 6P and 6Z.
DESCRIPTION APPLICATIONS
The Series 6 Pressure Switch is a highly reliable pressure switch for Gas Compressors Air
tough applications. Its precision machined aluminum body is
anodized for maximum corrosion protection. A polymide film Pumps Hydraulics
diaphragm operates a field adjustable switch trip point mechanism
attached to a long mechanical life, sensitive differential snap- Water and Waste Water Chemical Processing
switch(es), except the 6P where a piston replaces the diaphragms.
(1) SEE HOW TO ORDER SECTION The differential or deadband fixed and varies with the pressure setting.
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net
Pressure Switches, Inc.
SPECIFICATIONS HOW TO ORDER
NOWT: Boat and pressure operated Certified by CSA: Cert. file No. To order a pressure switch that will
motor controllers, for use in hazard- LR76122-1 Class I, Div. 1 Groups B, C, meet your requirements, specify a
ous locations. D; Class II, Div. 2 Groups E, F, G. Class model by using the chart below. All
3238 01 - Switches-Automatic- configurations may not be immedi-
Listed by: Uderwriters Laboratories Inc. Pressure Type for Hazardous Loca- ately available. Consult factory.
(File No. E123884) suitable for: Class I, tions.
Div. 1, Groups A, B, C, D; Class II, Div. EXAMPLE: 6G 12 F1 . 03
2, Groups E, F, G. Snap switch ratings:
SPDT (gold): 100mA @125 VAC; 6G 12 F1 03
Maximum ambient and service 0.250 A @ 6 VDC. * *
temperature range: -30F to 160F DPDT (gold, 2 microswitches): 100mA Switch Adjustment Range, Choose
(-34C to 71C). Note: Polymide for @125 VAC; 0.250 A @ 6 VDC. the range from "Switch Adjustment
water service 140F (60C) maximum. Range" Column (See Table 1) and
enter the range ID Number.
Internal ground screw clamp.
Nitrile 0-Ring Polymide
N1
Series 6 - LOW PRESSURE SWITCH Diaphram
Viton 0-Ring Polymide
F1
Diaphram
DESCRIPTION: F2
Viton 0-Ring Stainless Steel
bands, with all the standard features of the 12 SPDT (Gold STD.)
Series 6 with UL listing for Hazardous Areas. 33 DPDT (Gold STD.)
FOR VERY LOW RANGE INSTRUMENTATION INSTRUMENTATION AIR PRESSURE SWITCH LTR MALT Port Size
APPLICATIONS RANGE ID: .12. FOR PNEUMATIC AND OTHER APPLICATIONS A AL 1/2-14 NPT
RANGE ID: .14. C 316SS 1/4-18 NPT
Adjustable range: 3.0” - 100” WC
Adjustable range: 2-16 PSIG G AL 1/4-18 NPT
Deadband: .50” - 3.0” WC (Approx.)
Deadband: 2” WC - 0.25 PSIG (Approx.) H 316SS 1/4-18 NPT
Proof Pressure: 250 PSIG
Proof Pressure: 250 PSIG P AL 1/4-18 NPT
Typical model number: 6G12N1.12 Z 316SS 1/2-14 NPT
Typical model number: 6G12N1.14
*Wetted materials.
DIMENSIONS
Specifications and availibilty subject to Weight: Approx. 40 oz (1.13 kg) min. SEE HOW TO ORDER
change without prior notice.
1-800-259-6874
23400 Hwy. 435, Abita Springs, LA 70420
www.pressureswitches.com - sales@mepinc.net