Documente Academic
Documente Profesional
Documente Cultură
academy-online.krohne.com OPEN
Heating, Ventilation and Air Conditioning (HVAC) system work to maintain a controlled environment in a building.
3. What are the things we have in Indoor unit & Outdoor Unit
The local comforting cooling system has its evaporator is housed in a room unit and the condenser is housed in a separate outdoor unit. Both
units are connected with the refrigerant flow and return pipes.
Axial Fan: Has the Parallel Movement of Air. Centrifugal Fan: Has the Perpendicular Movement of Air.
GI Duct, Aluminium Sheet Metal, Fibre Glass Duct, Thick Black Mild Steel, Galvanized Steel Sheet & PUF.
8. What is cladding?
The cladding is a material used to coat structure interior, cladding be or cannot be waterproof, but it often controls how elements hit or fall on a
surface.
Air-cooled: condenses refrigerant vapor by rejecting heat to ambient air blown over the finned condenser coil with the aid of a fan.
Water-cooled: condense refrigerant in the shell and on the outside of tubes through which water passes.
Evaporative: cooling tower, with the condenser tubes washed by the water spray.
Compression: The refrigerant enters the compressor as a low-pressure gas with low temperature. Then, the refrigerant is compressed
adiabatically, so that the fluid leaves the compressor at high pressure and with a high temperature.
Condensation: High-pressure, high-temperature gas releases thermal energy and condenses within the “condenser” portion of the system.
The condenser is in contact with the hot tank of the cooling system.
https://automationforum.in/t/hvac-interview-questions/4363/print 1/2
29/03/2019 HVAC interview questions - Interview Q & A - Industrial Automation, PLC Programming, scada & Pid Control System
Throttling: The liquid refrigerant is pushed through a throttling valve, which causes it to expand. As a result, the refrigerant now has low
Evaporation: The low pressure, low temperature refrigerant enters the evaporator. The liquid absorbs heat from the cold reservoir and
evaporates. The refrigerant leaves the evaporator as a gas at low temperature and low pressure, and re-enters the compressor, at the
https://automationforum.in/t/hvac-interview-questions/4363/print 2/2