Documente Academic
Documente Profesional
Documente Cultură
2153-08
2153-10
© Hectronic GmbH
For this documentation the company stresses Hectronic GmbH copyright protection. This
documentation may be amended, extended or multiplied without previous written
agreement of the Hectronic GmbH neither, be used still otherwise in the contradiction for
other entitled interests.
Changes of technical details opposite the descriptions, data and illustrations of this
manual are reserved.
TABLE OF CONTENTS
1 GENERAL INFORMATION
The pulse generator is used, if mechanical counting must be converted into electrical
pulse rates, to be electronically transferred and displayed.
Its main operational areas are gasoline pumps and industrial measuring systems.
The direction of rotations is given from an integrated needle free wheel. Two independent
phase shifted pulse series, given from an opto-electrical input system, allow a precise
pulse monitoring.
The housing consists of aluminium pressure pouring. For the mounting two metal
mounting plates with several drillings are included in the delivery, whereas a third
mounting plate can be ordered optionally. The pulse generator is connected to the
operation system through an up to 3,5 m long, 4-wired connection cable.
2 SAFETY REFERENCES
Representation
safety references
CAUTION!
Designates a possibly dangerous situation. With attention of the
reference bodily injuries or damages to property cannot occur .
CONSIDER!
Designates user indications and other one, particularly important,
information.
3 INTENDED USE
This product was developed for the employment within the potentially explosive
atmosphere in the flameproof enclosure packaging after EN 50014 and EN 50018 and
certified.
The pulse generator is used, if mechanical counting must be converted into electrical
pulse rates, in order to be able to display it electronically.
Its main operational area is the installation in gasoline pumps or to the measuring
chambers of tank cars.
CONSIDER!
The design inspection certificate and for the use and/or the targeted
application applicable laws and/or guidelines have to be considered.
In case of inappropriate handling and not intended use of the pulse generator the
manufacturer does not take over responsibility. In this case alone the operator is
responsible for damage or injuries.
4 INSTALLATION, START-UP
All employees who are concerned with installing, setting-up and the maintenance of the
pulse generator 2153, have to be trained and instructed for this activity and have to know
all possible risks.
Yellow
White
Green
Brown
Shield
CAUTION!
The maximum connected loads for the operating voltage are
described in the technical data. The indicated values have to be
respected strictly. For inappropriate use of the pulse generator the
manufacturer does not take over responsibility.
CONSIDER!
When connecting the pulse generator an assembly of metal on metal
has always to be ensured and so for the PE potential of the gasoline
pump. Therefore no special protective grounding connection is
intended.
5 MAINTENANCE
CAUTION!
At devices, which are operated within potentially explosive
atmosphere, no changes may be made.
The housing of the pulse generator is stuck and may not be opened.
Repairs at these devices are not possible.
The concerned device is not labelled with the allowed environmental temperature
range. The concerned device is delivered always including a standard mounted
connection cable. The grounding of the pulse generator must be realised upon
installation. The concerned device may not be used during activ power supply.
None is additional.
8 NAMEPLATES
IG 2153-08
IG 2153-10
9 TECHNICAL DATA
10 CERTIFICATES