Documente Academic
Documente Profesional
Documente Cultură
-PRELIMINARY-
2GHz & 3Ghz Mechanical Electrical Tilt (MET)
Single Column Sector Antennas NEW!
The SP series Mechanical Electrical Tilt (MET) WiMAX antennas utilize a propri-
etary and innovative distributed phase shifter technology that provides high
performance pattern control and efficiency. These antennas are designed to
cover the 2.3-2.7GHz and 3.3-3.8GHz bands and offer an excellent front-to-
back ratio of >32 dB with an SWR of less than 1.5 across the entire operating
frequency.
Features
• Outstanding front-to-back ratio & port to port isolation
• VSWR of less than 1.5
• Null fill
• Great upper side lobe suppression
• Mechanical Electrical Tilt (MET)
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
• Outstanding port to port isolation of 30 dB typical
• VSWR of less than 1.5
• Great upper side lobe suppression
• Adjustable scissors-style pipe mount bracket with 0-10° downtilt
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
SP2327-16XP65 2300-2500 MHz 16.0 dBi 65° +/- 5° 9°
2500-2700 MHz 16.5 dBi 65° +/- 5° 9°
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Radiation Patterns
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
• Outstanding port to port isolation of 30 dB typical
• VSWR of less than 1.5
• Double null fill
• Adjustable scissors-style pipe mount bracket with 0-10° downtilt
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
SP2327-16XP60NUF 2300-2500 MHz 16.0 dBi 60° +/- 5° 9°
2500-2700 MHz 16.5 dBi 60° +/- 5° 9°
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Radiation Patterns
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Radiation Patterns
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
• Outstanding port to port isolation of 30 dB typical
• VSWR of less than 1.5
• Great upper side lobe suppression
• Adjustable scissors-style pipe mount bracket with 0-10° downtilt
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
SP3338-17XP65 3300-3500 MHz 16.5 dBi 65° +/- 5° 7°
Technical Data 3500-3800 MHz 17.0 dBi 65° +/- 5° 7°
Polarization: SP3338-16XP90 3300-3500 MHz 15.5 dBi 90° +/- 5° 7°
Linear dual slant +/- 45° 3500-3800 MHz 16.0 dBi 90° +/- 5° 7°
Nominal Impedance:
50 ohms
VSWR:
< 1.5 Mechanical Specifications
Front to Back Ratio:
> 25 dB Temperature Dimensions Weight Wind
Port to Port Isolation:
Model Range (L X W X D) (Mass) Survivability
30 dB typical
SP3338-17XP65 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
Upper Side Lobe Suppression: -40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
30 degrees above horizon: > -15 dB
SP3338-16XP90 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
Radome Material: -40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
Gray UV resistant plastic
Connector:
Type N female
Mounting Method:
Adjustable pipe mount bracket (included)
Mount Material:
Nickel Zinc Trivalent Plated Steel
(RoHS Compliant)
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Radiation Patterns
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
Technical Data SP4959-17XP65 4.9-5.4 GHz 17.5 dBi 65° +/- 10% 5°
Polarization: 5.4-5.9 GHz 16.5 dBi 65° +/- 10% 5°
Linear dual slant +/- 45°
Nominal Impedance: SP4959-16XP90 4.9-5.4 GHz 16.5 dBi 90° +/- 10% 5°
50 ohms 5.4-5.9 GHz 15.5 dBi 90° +/- 10% 5°
VSWR:
< 1.5
Front to Back Ratio:
> 25 dB Mechanical Specifications
Port to Port Isolation:
Temperature Dimensions Weight Wind
30 dB typical
Model Range (L X W X D) (Mass) Survivability
Upper Side Lobe Suppression:
30 degrees above horizon: > -15 dB SP4959-17XP65 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
-40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
Radome Material:
Gray UV resistant plastic
SP4959-16XP90 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
Connector: -40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
Type N female
Mounting Method:
Adjustable pipe mount bracket (included)
Mount Material:
Nickel Zinc Trivalent Plated Steel
(RoHS Compliant)
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth Technical Data
Polarization:
SP2327-18VP60NUF 2300-2500 MHz 17.5 dBi 60° +/- 5° 6° Vertically Polarized
2500-2700 MHz 18.0 dBi 60° +/- 5° 6° Nominal Impedance:
SP2327-17VP90NUF 2300-2500 MHz 16.0 dBi 90° +/- 5° 6° 50 ohms
2500-2700 MHz 16.5 dBi 90° +/- 5° 6° VSWR:
< 1.5
SP2327-15VP120NUF 2300-2500 MHz 15.0 dBi 120° +/- 5° 6°
Front to Back Ratio:
2500-2700 MHz 15.5 dBi 120° +/- 5° 6°
> 32 dB
Null Fill:
-15dB
Mechanical Specifications Upper Side Lobe Suppression:
30 degrees below horizon: > -18 dB
Temperature Dimensions Weight Wind
Model Range (L X W X D) (Mass) Survivability Radome Material:
Gray UV resistant plastic
SP2327-18VP60NUF -40°C to 70°C storage / 48.5” x 6.7” x 3.5” 8.8 lbs 125 mph Connector:
-40°C to 70°C operating (1232 x 171 x 90 mm) (4.0 kg) (200 km/h) Type N female
Mounting Method:
SP2327-17VP90NUF -40°C to 70°C storage / 48.5” x 6.7” x 3.5” 8.8 lbs 125 mph Adjustable pipe mount bracket (included)
-40°C to 70°C operating (1232 x 171 x 90 mm) (4.0 kg) (200 km/h)
Mount Material:
Nickel Zinc Trivalent Plated Steel
SP2327-15VP120NUF -40°C to 70°C storage / 48.5” x 6.7” x 3.5” 8.8 lbs 125 mph
(RoHS Compliant)
-40°C to 70°C operating (1232 x 171 x 90 mm) (4.0 kg) (200 km/h)
PCTEL offers the Materials as a service to you and reserves the right to make corrections, technical changes or other modifications to the Materials on this catalog at any time. PCTEL further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
Technical Data
Polarization:
SP3338-16VP65 3300-3500 MHz 15.5 dBi 65° +/- 5° 8°
Vertically Polarized 3500-3800 MHz 16.0 dBi
Nominal Impedance: SP3338-15VP90 3300-3500 MHz 14.5 dBi 90° +/- 5° 8°
50 ohms 3500-3800 MHz 15.0 dBi
VSWR: SP3338-14VP120 3300-3500 MHz 13.0 dBi 120° +/- 5° 8°
< 1.5 3500-3800 MHz 13.5 dBi
Front to Back Ratio:
> 25 dB
Radome Material:
Gray UV resistant plastic Mechanical Specifications
Connector:
Type N female Temperature Dimensions Weight Wind
Model Range (L X W X D) (Mass) Survivability
Mounting Method:
Adjustable pipe mount bracket (included)
SP3338-16VP65 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
Mount Material: -40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
Nickel Zinc Trivalent Plated Steel
SP3338-15VP90 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
(RoHS Compliant) -40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
SP3338-14VP120 -40°C to 65°C storage / 28” x 6.7” x 3.5” 7 lbs 125 mph
-40°C to 65°C operating (711 x 171 x 90 mm) (3.1 kg) (200 km/h)
PCTEL offers the Materials as a service to you and res further reserves the right
to make enhancements, improvements and ot All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
-PRELIMINARY-
Features
Electrical Specifications
Frequency Azimuth Elevation
Model Range Nominal Gain Beamwidth Beamwidth
Technical Data
SPVS4959-18VP65 4.9-5.9 GHz 17.5 dBi 65° +/- 5° 6°
Polarization:
Vertical
SPVS4959-17VP90 4.9-5.9 GHz 16.5 dBi 90° +/- 5° 6°
Nominal Impedance:
50 ohms
SPVS4959-15VP120 4.9-5.9 GHz 14 dBi 120° +/- 5° 6° VSWR:
< 1.5
Front to Back Ratio:
> 25 dB
Upper Side Lobe Suppression:
Mechanical Specifications 30 degrees below horizen: > -15 dB
PCTEL offers the Materials as a service to you and res further reserves the right
to make enhancements, improvements and other changes to its products and services at any time or to discontinue any product or service at any time without prior notice. All any pictures drawing etc. are
representations of products and actual production products might look differently than depicted.
Features
• The antennas offer a choice of 45º, 60º, 90º or 120° single beamwidth sector.
WISP4959018MBV Multiple antennas can be utilized to cover several geographical sectors using
additional radios. Great for use in place of an obstructed wall mounted omni.
• Industry leading front-to-back ratios. Ensure that the radiated energy is
focused towards its target, and not to the back or sides of the antennas.
• Attractive, streamline design reduces wind loading for easier handling
during installation.
• Includes adjustable pipe mount that permits uptilt or downtilt adjustment
for more precise coverage of the geographic area.
The Quik Ship icon indicates that the product is available for
immediate delivery from select distributors.
Features
• Covers 2.4 to 2.5 GHz and 4.9 to 5.9 GHz frequencies with excellent
VSWR performance.
• Outstanding front-to-back ratio and controlled sidelope radiation ensures
that the radiated energy is targeted towards the area of coverage.
• Included adjustable pipe mount permits uptilt, downtilt or vertical adjustment
of +/-15 degrees for more precise coverage of the geographic area.
• Slim, low pro le housing and included pipe mount provide added mounting This antenna is designed to cover
frequencies from 2.4 GHz to 2.5 GHz
exibility for locations where space availability is limited. and 4.9 GHz to 5.9 GHz. Its slim, low
• High isolation design – outstanding for both bands. 68 dB is typical when pro le housing and pipe mount provide
antennas are radially spaced and used for omnidirectional coverage added mounting exibility for locations
(typically 3 antennas are used radially spaced, 120° apart). where space availability is limited.
Features
Electrical Specifications
Omnidirectional Antenna, Side
View (top); Bottom View (bottom) Frequency Nominal H-plane E-plane
Model Range Gain Beamwidth Beamwidth VSWR
Mechanical Specifications
Wind Equivalent Lateral Bending
Model Survival Flat Plane Thrust @ Moment @ Height Weight
Area Rated Wind Rated Wind
MHO24004NM 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 8.5” 0.3 lbs
(.14 kg)
50 Ohms 180
−5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5
0 180
−5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5
0
Features
Mechanical Specifications
Wind Equivalent Lateral Bending
Model Survival Flat Plane Thrust @ Moment @ Height Weight
Area Rated Wind Rated Wind
MHO24006NM 125 mph 0.05 ft2 4.4 lbs. 2.2 ft-lbs. 12” 0.3 lbs.
(.14 kg)
Technical Data Radiation Patterns
General Specifications:
Omnidirectional Base Station Antenna 260 270 280 250
260 270 280
290
250 290
240 300
Maximum Input Power: 240 300
230 310
25 watts 230 310
220 320
220 320
Radome Material 210 330
UV Stable Plastic 210 330
Polarization: 180
−5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5
0 180
−5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5
0
Vertical Linear
170 10 170 10
Mounting Method:
160 20 160 20
N Female Bulkhead or Pipe Mount
150 30 150 30
Termination:
Type N Male 140 40 140 40
130 50 130 50
120 60 120 60
110 70 110 70
100 90 80 100 80
90
Features
Mechanical Specifications
Wind Equivalent Lateral Bending
Model Survival Flat Plane Thrust @ Moment @ Height Weight
Area Rated Wind Rated Wind
MHO24008NM 125 mph 0.08 ft2 7.1 lbs. 5.7 ft-lbs. 19.3” 0.35 lbs
(.16 kg)
−5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5 −5 −10 −15 −20 −25 −30 −35 −35 −30 −25 −20 −15 −10 −5
Polarization: 180 0 180 0
Features
• Slender rugged housing
• Innovative vented design with aerated cap and base drain system
• White UV resistant radome. Protects the antenna from environmental fac-
tors
Electrical Specifications
Frequency Nominal H-plane E-plane
Model Range Gain Beamwidth Beamwidth VSWR
Mechanical Specifications
Wind Equivalent Lateral Bending
MHO495905NF & NM Omnidirectional Model Survival Flat Plane Thrust @ Moment @ Height* Weight
Antenna (left); Connector Views (right) Area Rated Wind Rated Wind
MHO495907NF 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 10.2” 0.3 lbs
(.14 kg)
MHO495907NM 125 mph 0.04 ft2 3.1 lbs. 1.1 ft-lbs. 10.2” 0.3 lbs
(.14 kg)
Radiation Patterns
Technical Data
General Specifications:
Omnidirectional Base Station Antenna
Maximum Input Power:
25 watts
Radome Material
UV Stable Plastic
Nominal Impedance:
50 Ohms
Polarization:
Vertical Linear
Termination:
Type N Female & N Male
Features
Electrical Specifications:
Frequency Nominal H-plane E-plane
Model Range Gain Beamwidth Beamwidth VSWR
MHO58010NF & NM Omnidirectional
Antenna (left); Connector Views (right) MHO58010NF 5.15-5.875 GHz 10 dBi 360° (omni) 10° < 2.0
MHO58010NM 5.15-5.875 GHz 10 dBi 360° (omni) 10° < 2.0
Mechanical Specifications:
Wind Equivalent Lateral Bending
Technical Data Model Survival Flat Plane Thrust @ Moment @ Height Weight
General Specifications: Area Rated Wind Rated Wind
Omnidirectional Base Station Antenna
Maximum Input Power: MHO58010NF 125 mph 0.08 ft2 6.8 lbs. 5.6 ft-lbs. 18.38” 0.35 lbs
25 watts (.16 kg)
Radome Material MHO58010NM 125 mph 0.08 ft2 6.8 lbs. 5.6 ft-lbs. 18.38” 0.35 lbs
UV Stable Plastic (.16 kg)
Nominal Impedance:
50 Ohms
Polarization:
Vertical Linear
Mounting Method:
N Female/N Male Bulkhead or Pipe Mount
Termination:
Type N Female & N-Male
Features
• UV stable, pultruded berglass radome. Allows outdoor installation even
in harsh climates.
MFB49009 MFB58009
• Vented system design. Provides reliable performance by protecting the
electrical design against extreme moisture and/or temperatures.
• Thread relief on connector. Improved accessibility for taping reduces
installation time and improves overall effectiveness.
• Internal o-ring seal in the base of the antenna with integrated connector
at the base. Assures a watertight seal to prevent water from migrating
into the antenna connector.
Vented System
Technical Data
Maximum Power: 25 watts
Polarization: Vertical
Nominal Impedance: 50 ohms
VSWR: < 1.5:1
MMK1924 MMK8A
Radome Material: UV resistant pultruded berglass
Lightning Protection:
Not standard, but all models can be ordered with DC grounding.
Add “DC” to the part number to order the antenna with DC grounding.
Termination:
N female.
Mounting Base Diameter:
1.25 inches
Mounting Method:
MMK1924 - L bracket mount for wall or pipe mount
MMK8A - Aluminum extruded bracket for mast mounting
MMK11 - Ceiling mount bracket
Mechanical Specifications
Bending Moment Lateral Thrust Equivalent Flat Wind
Model Height Weight (Mass)
at Rated Wind at Rated Wind Plate Area Survival
MFB25007 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB49009 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB49009DC 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB51510 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB58009 15.7” (398.8 mm) 0.43 lbs (0.195 kg) 2.7 ft-lbs 4.1 lbs .046 ft 2
125 mph
Features
• UV stable, pultruded fiberglass radome. Allows outdoor installation even
in harsh climates.
MFB49009 MFB58009 MFB24012 • Vented system design (all models except MFB24012). Provides reliable
performance by protecting the electrical design against extreme moisture
and/or temperatures.
• Thread relief on connector (all models, except MFB24012 which has a
pigtail). Improved accessibility for taping reduces installation time and
improves overall effectiveness.
• Internal o-ring seal in the base of the antenna with integrated connector
at the base. Assures a watertight seal to prevent water from migrating into
the antenna connector (all models, except MFB24012 which has a pigtail).
• Electrical downtilt options on select models. Provide system planners
Vented System flexibility in challenging operating environments.
Technical Data
Maximum Power: 25 watts
Polarization: Vertical
Normal Impedance: 50 ohms
VSWR: < 1.5:1
Radome Material: UV resistant pultruded fiberglass
MMK1924 MMK8A
Lightning Protection:
Not standard, but all models can be ordered with DC grounding.
Add “DC” to the part number to order the antenna with DC grounding.
Termination:
N female (except MFB24012).
N male connector option available. To order, add “NM” to part number.
N female, reverse polarity and reverse threaded connectors optional on most models.
16” RG-213 pigtail with N female connector (for model MFB24012 only.)
Mounting Base Diameter:
1.25 inches (all models except MFB24012)
1.5 inches (model MFB24012)
Mounting Method:
MMK1924 — L bracket mount for wall or pipe mount (except MFB24010 and MFB24012)
MFB24004 MMK12 MMK8A - Aluminum extruded bracket for mast mounting (except model MFB24012)
with MMK11 MMK11 - Ceiling mount bracket (for MFB24004, MFB24006 and MFB24008 only)
MMK12 - Heavy duty bracket for mast mounting the MFB24012
MMK14 - Light duty mounting clamp for MFB24012
Mechanical Specifications
Bending Moment Lateral Thrust Equivalent Flat Wind
Model Height Weight (Mass)
at Rated Wind at Rated Wind Plate Area Survival
MFB19008A 24.0” (609.6 mm) 0.70 lbs (0.318 kg) 5.7 ft-lbs 5.9 lbs .07 ft2 125 mph
MFB24004 8.1” (205.7 mm) 0.34 lbs (0.154 kg) 0.7 ft-lbs 2.1 lbs .02 ft 2
125 mph
MFB24006 11.6” (294.6 mm) 0.38 lbs (0.172 kg) 1.4 ft-lbs 3.0 lbs .04 ft 2
125 mph
MFB24008 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB24008DT7 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB24008DT12 20.2” (513.1 mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB24010 36.0” (914.4 mm) 0.65 lbs (0.295 kg) 14.7 ft-lbs 10.1 lbs .11 ft 2
125 mph
MFB24012 44.0” (1,118 mm) 3.00 lbs (1.400 kg) 41 ft-lbs 22.4 lbs .25 ft 2
125 mph
MFB49009 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft 2
125 mph
MFB51510 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
MFB58009 15.7” (398.8 mm) 0.43 lbs (0.195 kg) 2.7 ft-lbs 4.1 lbs .046 ft2 125 mph
MFB58010 20.2” (513.1 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs .06 ft2 125 mph
Features
• Printed circuit board design provides the best performance-to-price ratio.
13 dBi panel on • UL94-V0 plastic and PC board. Provides UL’s high ame retardant rating
MPAB12 corner wall mount allowing maximum placement exibility and meeting stringent building re
rating codes.
• Attractive, low pro le housing. Blends well with indoor and outdoor
environments where aesthetic considerations are important.
• Corner exit RG-58/U pigtail design (PCS and 2.4 GHz models), .141 semi-
rigid (5.1 and 5.8 GHz models), and high performance Plenum Rated ML195
(dual band models). Permits the linear polarized panel to be mounted in
vertical or horizontal polarity with a wide variety of connectors.
Small housing panel on • Optional UL 910 rated Plenum cable. Allows the cable to be installed in any
MPAB11 wall mount indoor mounting location, including air ducts.
• Adjustable mounting brackets for indoor and outdoor mounting. Provide
maximum exibility for indoor or outdoor installations.
Mounting Method
Model/Mount MPAB7 MPAB8 MPAB11 MPAB12
MP24018XFPT MP24008XFPT N/A N/A included optional
MP24013XFPT optional optional optional optional
MP24580809XFPT N/A N/A N/A optional
MP24581820PT optional optional N/A N/A
MP58013XFPT N/A N/A included optional
Technical Data
MP495913XFPT N/A N/A included optional
General Speci cations:
Directional panel antennas Heavy duty
outdoor
Maximum Power Input:
adjustable mount
See Electrical Speci cations with +/-35° Heavy duty
Polarization: Linear, vertical/horizontal uptilt/downtilt. outdoor adjustable Short adjustable
mount with 17° indoor mount.
Nominal Impedance: 50 ohms Mount If used with uptilt/downtilt. Long adjustable
MP24018XFPT the It may be used indoor corner
VSWR: See Electrical Speci cations Description mount provides If used with outdoors with mount.
Radome Material: UL 94-V0 plastic +/-18° uptilt/ MP24018XFPT the small housing
downtilt. mount provides +/- panels only.
Cable: See Mechanical Speci cations 9° uptilt/downtilt.
Same as MPAB8
Connector Options: but bracket is
N female (part #NF) standard. longer.
Other connector options are available.
Consult factory.
Mechanical Specifications
Temperature Wind Loading (Frontal)
Model Dimensions Weight (Mass) Cable
Range @100 mph Wind
5.1” x 4.7” x 1.5” 12” (30.5 cm) RG58/
MP24008XFPT 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs
(12.9 x 11.9 x 3.8 cm) U**
8.8” x 8.1” x 1.6” 12” (30.5 cm) RG58/
MP24013XFPT 1.2 lbs (0.54 kg) -40°C to +70°C 27.9 lbs
(22.4 x 20.6 x 4.06 cm) U**
5.1” x 4.7” x 1.5”
MP24580809PT 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs 12” (30.5 cm) ML195*
(12.9 x 11.9 x 3.8 cm)
15.1” x 13.9” x 1.9” 12” (30.5 cm)
MP24581820PT 3.9 lbs (1.8 kg) -40°C to +70°C 85 lbs
(38.4 x 35.3 x 4.8 cm) .141 semi-rigid*
5.1” x 4.7” x 1.5” 6” (15.25 cm)
MP58013XFPT 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs
(12.9 x 11.9 x 3.8 cm) .141 semi-rigid*
5.1” x 4.7” x 1.5” 6” (15.25 cm)
MP495913XFPT 0.5 lbs (0.23 kg) -40°C to +70°C 9.3 lbs
(12.9 x 11.9 x 3.8 cm) .141 semi-rigid*
The Quik Ship icon indicates that the product is available for
immediate delivery from select distributors.
* Plenum Rated cable
** UL910 Plenum Rated cable optional for these models
Features
• Patented printed circuit board design. Best performance-to-price ratio.
• Attractive, low pro le UV stable housing. Blends well with indoor and
outdoor environments where aesthetic considerations are important.
• Corner exit RG-58/U pigtail design. Permits the panel to be mounted in
vertical or horizontal polarity.
• Adjustable mounting brackets for outdoor mounting. Provide maximum
exibility for outdoor installations.
Features
• No tune, multi-band platform covers the most widely used in-building fre-
quencies
• N female flange connector termination provides a single cable exit for
easier installation and/or antenna replacement
• Attractive low profile design addresses aesthetic considerations and over-
head clearance requirements
• UL 94V-0 plastics and PC boards for compliance with strict building safety
code requirements
• Aluminum backplate template with drill guiding screw holes for faster,
easier installation and labor cost optimization
• Outstanding value: PCTEL world-known antenna quality and reliability, a
competitive price; and a single antenna covering multiple frequency ap-
plications
Technical Data
Antenna Electrical Specifications
General Speci cations:
Horizontal Vertical 2.4 GHz ISM enclosed yagi antenna series
Frequency Nominal Front-to-
Model Beamwidth Beamwidth Maximum Power: 5 watts
Range Gain Back Ratio
@ 1/2 Power @ 1/2 Power Polarization: Vertical or horizontal, linear
2400-2686 (user adjustable)
MYPB24015PT 15 dBi 30° 30° 30 dB
MHz Nominal Impedance: 50 ohms
VSWR: < 1.5:1
Mechanical Specifications Wind Survival: 125 mph
Weight Lateral Thrust Equivalent Flat Cable: 12” (305 mm) Pro-Flex™ Plus 195
Model Dimensions
(Mass) at Rated Wind Plate Area Termination:
N, female is standard
14” L x 3” OD 1 lb Consult factory for other connector options
MYPB24015PT 18.3 lbs 0.20 ft2
(356 x 76 mm) (0.5 kg)
Mounting Method:
Heavy duty yagi mounting bracket
Accessories (included) permits mast mounting on
masts up to 2” O.D.
Model Description MYK18 adjustable wall/pipe mount
allows 180°(included angle) azimuth and
Stacking harness for two 2.4 GHz MYP elevation adjustment (sold separately.)
MSK2450MN Stacking harnesses available to stack two
directional yagis. N male connector.
yagis (sold separately.)
Stacking harness for two 2.4 GHz MYP
MSK2450MSMA
directional yagis. Male SMA connector.
Cable Assemblies
Model Description
MCA195FSMAMN Pro-Flex™ Plus 195 cable assembly with type SMA female and N
male connectors
MCA195FSMA-NC Pro-Flex™ Plus 195 high performance RG-58/U cable assembly
with SMA female jack connector
MCA195MSMAFSMA Pro-Flex™ Plus 195 cable assembly with SMA male and N
female connectors
MCA195NFFSMA Pro-Flex™ Plus 195 cable assembly with SMA female and N
MGB Grounding Block female connectors
MCA195NFNM Pro-Flex Plus™ 195 cable assembly with SMA female and N
male connectors
MCA195NMFME Pro-Flex Plus™ 195 cable assembly with N male and FME
connectors
MCA195NMMU Pro-Flex™ Plus 195 cable assembly with N male and mini-UHF
connectors
MCA195NMNM Pro-Flex™ Plus 195 cable assembly with N male and N male
connectors
MCA195NMRPC Pro-Flex™ Plus 195 cable assembly with N male and reverse
polarity TNC connectors
MCA195NMRPMSMA Pro-Flex™ Plus 195 one-foot cable assembly with N male and
SMA reverse polarity connectors
MPD243NF MCA195NMTFRPC Pro-Flex™ Plus 195 cable assembly with Te on N male and
reverse polarity TNC connectors
MCA195PL259MN Pro-Flex™ Plus 195 cable assembly with PL259 and male N
connectors
MCA195PLPL Pro-Flex™ Plus 195 cable assembly with mini UHF connectors
on both ends
MCA195RANMC Pro-Flex™ Plus 195 cable assembly with TNC male and right
angle “N” male connectors
MCA195RPCJNM Pro-Flex™ Plus 195 cable assembly with male TNC and reverse
polarity TNC Jack 999 (female) connectors
MCA195RPCJRPC Pro-Flex™ Plus 195 cable assembly with male TNC and reverse
polarity TNC Jack (female) connectors
MCA400NFNM//50 Cable assembly with 50 ft. of LMR400 with SMA female and N
male connectors
MCA400NMNM5 LMR400 cable assembly 5 ft. with N male and N male connectors
Cable Accessories
Model Description
Grounding block. Grounded N female pass through connector
MGB and mounting bracket. Low cost way to make your installation
meet National Electrical Codes without using a lighting arrestor.
Lightning arrestor. Designed for maximum lightning capacity, no
maintenance and minimum insertion loss and VSWR covering the
MLP24RPC
2.4 GHz ISM band. Includes Reverse Polarity male/female TNC
connectors only.
Features
MPRC antenna (above);
back of antenna (below) • Available in two and three foot diameter sizes
• Radome comes standard and installed
• Rear mounted feed – radome never has to be removed
• Continuous polarization adjustment
• Fine adjustment mechanism for elevation and azimuth
• Assembled and attached offset mount allows easy access to connector
• Double saddle mounting brackets will accommodate pipes ranging from
1.625” to 4.5” OD
• Robust mounting structure. Three point mount attachment improves
stability and prevents re ector distortion and mechanical oscillation
• 2 foot versions are UPS shippable
Electrical Specifications
Nominal Gain 3 dB
(+/- 0.5 dB Beamwidth,
Model Frequency Range at mid band) Nominal
MPRC2423 2.3 - 2.7 GHz 21.5 dBi 12.4°
MPRC3623 2.3 - 2.7 GHz 24.5 dBi 9°
Features
• Availability in two and three foot diameter sizes
• Radome comes standard and installed
• Rear mounted feed – radome never has to be removed
• Continuous polarization adjustment
• Fine adjustment mechanism for elevation and azimuth
• Assembled and attached offset mount allows easy access to connector
• Double saddle mounting brackets will accommodate pipe attachments
ranging from 1.625” to 4.5” OD
• Robust mounting structure. Three point mount attachment improves
stability and prevents reflector distortion and mechanical oscillation
• 2 foot versions are UPS shippable
Features
• Availability in two and three foot diameter sizes
• Radome comes standard and installed
• Rear mounted feed – radome never has to be removed
• Linear, continuous polarization adjustment
• Fine adjustment mechanism for elevation and azimuth
• Assembled and attached offset mount allows easy access to connector
• Double saddle mounting brackets will accommodate pipe attachments
ranging from 1.625” to 4.5” OD
• Robust mounting structure. Three point mount attachment improves
stability and prevents reflector distortion and mechanical oscillation
• 2 foot versions are UPS shippable
Features
• Availability in two and three foot diameter sizes
• Radome comes standard and installed
• Rear mounted feed – radome never has to be removed
• Linear, continuous polarization adjustment
• Fine adjustment mechanism for elevation and azimuth
• Assembled and attached offset mount allows easy access to connector
• Double saddle mounting brackets will accommodate pipe attachments
ranging from 1.625” to 4.5” OD
• Robust mounting structure. Three point mount attachment improves
stability and prevents re ector distortion and mechanical oscillation
• 2 foot versions are UPS shippable
Features
• Molded polymer base provides ruggedness and durability
• Wideband coverage of 2.3-3.8 GHz WiMAX frequencies
• Antenna is ready to install; no rod cutting is required for operation across
the speci ed frequencies
Mechanical Specifications
Model Antenna Height
BMAXC233805 4.75” (12.06 cm)
Mounting Options
The following mounts are recommended with these antennas:
Model Description
MLFML195C High performance permanent 3/4” hole, 1-1/8”-18 thread
mount. Includes 17 ft of Pro-FlexTM Plus 195 cable. Loose TNC
Technical Data
male connector included. Other connector options available. Maximum Power:
100 watts
(B)GMLFML195C High performance 3-1/4” diameter magnetic base, 1-1/8”-
18 thread mount mount. Includes 12 ft of Pro-FlexTM Plus 195 Polarization:
cable terminated with TNC male connector (attached). Other Vertical, linear
connector options available. Nominal Impedance:
50 ohms
180
0 5 10 15 20 25 30 30 25 20 15 10 5 0
0 Rod Ferrule:
5/16” -24 thread; black chrome plated
170 10 nish
160 20
150 30
140 40
130 50
120 60
110 70
100 90 80
Features
• No tune, multi-band coverage: GSM 850, GSM 900, GSM 1800,
GSM 1900, 3G and WiFi/WiMAX frequencies, coupled with GPS
L1 frequencies
• Stylish low profile housing provides “omnidirectional” trouble-
free installation while complementing most vehicular aesthetic
requirements
• Metal 3/4-inch stud mount with slotted jam nut provides single
cable exit for easier installation and/or antenna replacement
• IP56 compliant design with custom over molded gasket provides
added protection against water or dust ingress under severe
environmental conditions
Antenna Specifications
Frequency Band Antenna Gain Polarization
GPS Timing
Antenna with 1575.42 +/- 10 MHz 4 dBic Right hand circular
Receiver (top); (Quadrifiliar Helix) (RHCP)
bottom view
(inset)
Receiver Specifications
General Update Rate Accuracy
Acquisition
Sensitivity PPS Protocols Interface
(Autonomous Operation)
Mechanical Specifications
Antenna Dimen-
Shipping Dimensions Antenna Weight Shipping Weight Radome Color Connector
sions
8-pin circular
5.0” H x 3.2” D 7.5” L x 4.4” W x 3.8” D 0.6 lbs 1.9 lbs
White connector conforming
(126 H x 81 mm) (190 L x 112 x 96 mm) (0.3 kg) (0.9 kg)
IEC 60130-9.v3.0
Environmental Specifications
Operating Temperature Humidity Ingress Protection
- 40°C to + 85°C 95% IP67
Model Numbers
All mounting options fit pipes of 1”-1.45” (25 mm-37 mm) maximum diameter.
RS232 Interface Models RS422 Interface Models Description
GPS-TMG-RCVR232 GPS-TMG-RCVR422 Timing antenna (does not include mounting hardware).
GPS-TMG-RCVR232NLM GPS-TMG-RCVR422NLM Timing antenna includes L-bracket mount (GPS-TMG-LMNT)
GPS-TMG-RCVR232NCB GPS-TMG-RCVR422NCB Timing antenna includes heavy duty mount (GPS-TMG-HDMNT)
Their unique radome shape sheds water and ice, while eliminating problems
associated with bird perching. The antenna can be purchased by itself, or with
pipe mounting hardware. Custom models or site kit options are also available.
GPS-TMG-50N
40 dB GPS L1/GLONASSL1/GALILEO E1
Timing Antenna with Integrated Lightning Protection
The GPSL1GL-TMG-SP-40NCB timing reference antennas are specifically
designed for long-lasting, trouble-free deployments in congested cell-site
applications. The low noise, high gain amplifier is well suited to address
attenuation issues associated with applications requiring longer cable runs.
The proprietary quadrifiliar helix design, coupled with multistage filtering
provides superior out-of-band rejection and lower elevation pattern
performance than traditional patch antennas.
Their unique radome shape sheds water and ice, while eliminating problems
associated with bird perching. The antenna may be purchased by itself or with
pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated
by EU directives RoHS 2002/95/EC.
The antenna provides integrated lightning protection capability.
The antenna also features ESD, reverse polarity protection and transit
voltage suppression.
All mounting options fit pipes of 1”-1.45” (25 mm-37 mm) maximum diameter. DC Current:
< 40 mA
Model Options Filtering:
3 stage filtering including pre-selector
GPSL1GL-TMG-SP-40NCB Includes heavy duty mount (part #19-9199-1).
Out of Band Rejection:
≥ -60 dB @ f ≤ 1530 MHz
≥ -60 dB @ f ≥ 1660 MHz
Lightening Protection:
90 V, 20 kA, 8/20 μS
Their unique radome shape sheds water and ice, while eliminating problems
associated with bird perching. The antenna may be purchased by itself or with
pipe mounting hardware. Custom models or site kits options are also available.
GPS-TMG-40N This antenna is made of materials that fully comply with provisions stipulated
by EU directives RoHS 2002/95/EC.
This antenna also features ESD, reverse polarity protection and transit
voltage suppression.
Their unique radome shape sheds water and ice, while eliminating problems
associated with bird perching. The antenna may be purchased by itself or with
pipe mounting hardware. Custom models or site kits options are also available.
This antenna is made of materials that fully comply with provisions stipulated
GPS-TMG-26N by EU directives RoHS 2002/95/EC.