Documente Academic
Documente Profesional
Documente Cultură
CAUTION
INSTRUCTIONS 1. COMPLIANCE INFORMATION
Product Name: Super Audio CD player
1. Read these instructions.
RISK OF ELECTRIC SHOCK 2. Keep these instructions. Model Number: SA8004
3. Heed all warnings. This product complies with Part 15 of the FCC Rules. Operation is subject
DO NOT OPEN to the following two conditions: (1) this product may not cause harmful
4. Follow all instructions.
interference, and (2) this product must accept any interference received,
CAUTION: 5. Do not use this apparatus near water.
including interference that may cause undesired operation.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 6. Clean only with dry cloth.
7. Do not block any ventilation openings. Marantz America, Inc.
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. (a D & M Holdings Company)
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, 100 Corporate Drive,
The lightning flash with arrowhead symbol, within an equilateral stoves, or other apparatus (including amplifiers) that produce heat. Mahwah, NJ, 07430, U.S.A.
triangle, is intended to alert the user to the presence of 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A Tel. (630) 741-0300
uninsulated “dangerous voltage” within the product’s enclosure
polarized plug has two blades with one wider than the other. A grounding
that may be of sufficient magnitude to constitute a risk of 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
electric shock to persons. type plug has two blades and a third grounding prong. The wide blade or the
This product, when installed as indicated in the instructions contained
third prong are provided for your safety. If the provided plug does not fit into
The exclamation point within an equilateral triangle is intended in this manual, meets FCC requirements. Modification not expressly
your outlet, consult an electrician for replacement of the obsolete outlet.
to alert the user to the presence of important operating approved by Marantz may void your authority, granted by the FCC, to use
10. Protect the power cord from being walked on or pinched particularly at
and maintenance (servicing) instructions in the literature the product.
plugs, convenience receptacles, and the point where they exit from the
accompanying the appliance.
apparatus.
3. IMPORTANT
WARNING: 11. Only use attachments/accessories specified by the manufacturer.
When connecting this product to network hub or router, use only shielded
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 12. Use only with the cart, stand, tripod, bracket, or table
STP or ScTP LAN cables which is available at retailer.
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. specified by the manufacturer, or sold with the apparatus.
Follow all installation instructions. Failure to follow instructions could void
When a cart is used, use caution when moving the cart/
your authority, granted by the FCC, to use the product.
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when 4. NOTE
CAUTION: unused for long periods of time. This product has been tested and found to comply with the limits for
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF 14. Refer all servicing to qualified service personnel. a Class B digital device, pursuant to Part 15 of the FCC Rules. These
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY Servicing is required when the apparatus has been damaged in any way, limits are designed to provide reasonable protection against harmful
RESULT IN HAZARDOUS RADIATION EXPOSURE. such as power-supply cord or plug is damaged, liquid has been spilled or interference in a residential installation.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY objects have fallen into the apparatus, the apparatus has been exposed to This product generates, uses and can radiate radio frequency energy and,
rain or moisture, does not operate normally, or has been dropped. if not installed and used in accordance with the instructions, may cause
ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or harmful interference to radio communications. However, there is no
the like. guarantee that interference will not occur in a particular installation. If this
n Laser Class (IEC 60825-1:2001) product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user
CAUTION: is encouraged to try to correct the interference by one or more of the
To completely disconnect this product from the mains, disconnect the plug following measures:
from the wall socket outlet. • Reorient or relocate the receiving antenna.
The mains plug is used to completely interrupt the power supply to the unit • Increase the separation between the equipment and receiver.
and must be within easy access by the user. • Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
PRECAUTION: • Consult the local retailer authorized to distribute this type of product or
Pour déconnecter complètement ce produit du courant secteur, débranchez
an experienced radio/TV technician for help.
la prise de la prise murale.
La prise secteur est utilisée pour couper complètement l’alimentation de
For Canadian customers:
l’appareil et l’utilisateur doit pouvoir y accéder facilement.
This Class B digital apparatus complies with Canadian ICES-003.
PRECAUCIÓN: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Para desconectar completamente este producto de la alimentación eléctrica, Canada.
desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir por completo
el suministro de alimentación eléctrica a la unidad y debe de encontrarse en
un lugar al que el usuario tenga fácil acceso.
I
ESPAÑOL FRANÇAIS ENGLISH
n NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO n CAUTIONS ON INSTALLATION
PRÉCAUTIONS D’INSTALLATION
WARNINGS AVERTISSEMENTS ADVERTENCIAS
EMPLAZAMIENTO DE LA INSTALACIÓN
• Avoid high temperatures. • Eviter des températures élevées. • Evite altas temperaturas.
Allow for sufficient heat dispersion when Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando
installed in a rack. suffisante lors de l’installation sur une étagère. está instalado en la consola.
• Handle the power cord carefully. • Manipuler le cordon d’alimentation avec • Maneje el cordón de energía con cuidado. z
Hold the plug when unplugging the cord. précaution. Sostenga el enchufe cuando desconecte el
• Keep the unit free from moisture, water, and Tenir la prise lors du débranchement du cordon. cordón de energía. z z
dust. • Protéger l’appareil contre l’humidité, l’eau et la • Mantenga el equipo libre de humedad, agua y - +
• Unplug the power cord when not using the unit poussière. polvo.
for long periods of time. • Débrancher le cordon d’alimentation lorsque • Desconecte el cordón de energía cuando no
• Do not obstruct the ventilation holes. l’appareil n’est pas utilisé pendant de longues utilice el equipo por mucho tiempo. z
• Do not let foreign objects into the unit. périodes. • No obstruya los orificios de ventilación.
Wall
• Do not let insecticides, benzene, and thinner • Ne pas obstruer les trous d’aération. • No deje objetos extraños dentro del equipo. Paroi
come in contact with the unit. • Ne pas laisser des objets étrangers dans • No permita el contacto de insecticidas, gasolina Pared
• Never disassemble or modify the unit in any way. l’appareil. y diluyentes con el equipo.
• Ventilation should not be impeded by covering • Ne pas mettre en contact des insecticides, du • Nunca desarme o modifique el equipo de
the ventilation openings with items, such as benzène et un diluant avec l’appareil. ninguna manera.
newspapers, tablecloths or curtains. • Ne jamais démonter ou modifier l’appareil d’une • La ventilación no debe quedar obstruida por
z
zFor proper heat dispersal, do not install this unit in a confined
• Naked flame sources such as lighted candles manière ou d’une autre. haberse cubierto las aperturas con objetos como
should not be placed on the unit. • Ne pas recouvrir les orifices de ventilation avec periódicos, manteles o cortinas.
space, such as a bookcase or similar enclosure.
• More than 0.1 m (4 in.) is recommended.
• Observe and follow local regulations regarding des objets tels que des journaux, nappes ou • No deberán colocarse sobre el aparato fuentes
• Do not place any other equipment on this unit.
battery disposal. rideaux. Cela entraverait la ventilation. inflamables sin protección, como velas
• Do not expose the unit to dripping or splashing • Ne jamais placer de flamme nue sur l’appareil, encendidas. z
zPour permettre la dissipation de chaleur requise, n’installez
fluids. notamment des bougies allumées. • A la hora de deshacerse de las pilas, respete la pas cette unité dans un espace confiné tel qu’une bibliothèque
• Do not place objects filled with liquids, such as • Veillez à respecter les lois en vigueur lorsque normativa para el cuidado del medio ambiente. ou un endroit similaire.
vases, on the unit. vous jetez les piles usagées. • No exponer el aparato al goteo o salpicaduras • Une distance de plus de 0,1 m (4 po) est recommandée.
• Do not handle the mains cord with wet hands. • L’appareil ne doit pas être exposé à l’eau ou à cuando se utilice. • Ne placez aucun matériel sur cet appareil.
• When the switch is in the OFF position, the l’humidité. • No colocar sobre el aparato objetos llenos de z
zPara la dispersión del calor adecuadamente, no instale este
equipment is not completely switched off from • Ne pas poser d’objet contenant du liquide, par líquido, como jarros. equipo en un lugar confinado tal como una librería o unidad
MAINS. exemple un vase, sur l’appareil. • No maneje el cable de alimentación con las similar.
• The equipment shall be installed near the • Ne pas manipuler le cordon d’alimentation avec manos mojadas. • Se recomienda dejar más de 0,1 m (4 pulg.) alrededor.
power supply so that the power supply is easily les mains mouillées. • Cuando el interruptor está en la posición OFF, el • No coloque ningún otro equipo sobre la unidad.
accessible. • Lorsque l’interrupteur est sur la position OFF, equipo no está completamente desconectado de
l’appareil n’est pas complètement déconnecté du la alimentación MAINS.
SECTEUR (MAINS). • El equipo se instalará cerca de la fuente de
• L’appareil sera installé près de la source alimentación de manera que resulte fácil acceder
d’alimentation, de sorte que cette dernière soit a ella.
facilement accessible.
II
ENGLISH
Getting started
Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading the manual, be sure to keep it for future reference.
Contents
Getting started········································································1 Basic operation· ······································································8 Advanced operations·························································14
Accessories·····················································································2 Before use·······················································································8 Before playback using a USB memory device or iPod ············14
About this manual·········································································2 Switching the sound mode (Playback layer)··································8 Playback of MP3 and WMA files·················································14
Main features··················································································2 Turning the power off····································································8 MP3 and WMA formats·······························································14
Cautions on handling·····································································3 Switching the input source···························································9 Playing MP3 and WMA files························································15
Discs································································································3 Playback CDs··················································································9 MP3 or WMA playback order of MP3 or WMA files···················15
Discs playable on this unit·····························································3 Playing Super Audio CDs or CDs··················································9 Playback iPod® ···········································································16
Holding discs·················································································3 Turning off display·······································································10 Playing an iPod®· ········································································16
Loading discs·················································································3 To change time display································································10 Disconnecting the iPod································································16
Cautions on loading discs······························································3 Listening with headphone···························································10 Playing a USB memory device····················································17
Cautions on handling·····································································4 Playing repeatedly (Repeat Playback)··········································10 Playable USB memory formats····················································17
Cautions on storing discs······························································4 Playing in random order (Random playback)································10 Playing files stored on USB memory devices······························17
Cleaning discs················································································4 Playing tracks in a specific order (Program playback)··················11 Removing the USB memory device ···········································18
About the remote control·····························································4 Searching for a specific track (AMS play)····································11 Connecting and playing back from a computer (USB)·················18
Inserting the batteries···································································4 Setting the digital output·····························································11 Using as a D/A converter····························································18
Operating range of the remote control··········································4 Connect and playback from a digital device (Coax/Opt) ·············18
Part names and functions·····························································5 Performing menu settings··························································19
Front panel·····················································································5 Advanced connections······················································12 Timer play (Timer play setting)·····················································19
Display···························································································5 Digital audio output······································································12 SA-CD (Switching sound mode)··················································20
Rear panel······················································································6 Digital audio input········································································12 USB Setup (USB memory device operation)·······························20
Remote control··············································································6 Preparations·················································································12 iPod Setup (iPod operation)·························································21
Connecting cables·······································································12 Auto STB (Auto standby mode)···················································22
Digital connection ·······································································12
Basic connections··································································7
USB memory device/iPod connection·······································13
Preparations···················································································7 PC connection···············································································13 Explanation of terms··························································23
Connecting cables·········································································7 Remote control connection·························································14
Analog connection·········································································7
Connecting the power cord··························································7 Troubleshooting···································································24
Specifications·········································································26
Index···························································································26
1
ENGLISH
Getting started
Check that the following parts are supplied with the product.
Toroidal transformer Playback of CD-R/CD-RW discs
q User guide ............................................................................... 1 This unit features a toroidal transformer that produces less
Basic connections
w AC power cord (Cord length: Approx. 6 ft (1.8 m)) .................. 1 vibration and magnetic leakage flux compared to conventional
e Audio connecting cable (Cord length: Approx. 3 1/4 ft (1.0 m)).. 1 power transformers. The materials and manufacturing process Playback of CD-R/CD-RW/CD-ROM discs (MP3/
Remote control connecting cable ............................................ 1 of the ring-shaped core are strictly controlled to reduce vibration,
r WMA) and USB audio (MP3/WMA/WAV/AAC)/
t Remote controller (RC004SA) ................................................. 1 while the short-ring attached to the perimeter of the transformer
reduce magnetic leakage flux. iPod
y AAA-size batteries ................................................................... 2
u Warranty card (U.S.A.) ............................................................. 1
Basic operation
i Warranty card (Canada) ........................................................... 1
Large-capacitance block capacitor Can be used as a D/A convertor
w e Digital audio signals input from an external device or computer into
A large capacitance 3300 µF capacitor carefully selected for its
acoustic characteristics is incorporated into the power supply this unit can be converted and output as analog signals using this
circuit. unit's D/A converter.
Advanced connections
Audiophile-grade fi lm capacitors and electrolytic
r t
capacitors
The unit’s features the same audiophile-grade film capacitors and
electrolytic capacitors specifically used in top-range models.
Advanced operations
Low-noise low-distortion fi lter circuit and high-
speed HDAMSA2-type output amplifi er with the
differential input type HDAM
About this manual
Explanation of terms
n Operation buttons Double-layered chassis
The operations described in this manual are based mainly on
remote control operation.
High-grade machined analog audio output
n Symbols
connectors
v This symbol indicates a reference page on which
Troubleshooting
related information is described.
This symbol indicates a supplementary information
and tips for operations.
This symbol indicates points to remember operations
NOTE
Specifications
or function limitations.
n Illustrations
Note that the illustrations in these instructions are for explanation
purposes and may differ from the actual unit.
Index
2
ENGLISH
3
ENGLISH
Discs
About the remote control
Getting started
Cautions on handling
• Do not get fingerprints, oil or dirt on discs. Inserting the batteries Operating range of the remote control
• Take special care not to scratch discs when removing them from q Remove the rear cover of the w Set two R03/AAA batteries in Operate the remote control while pointing it at the remote sensor.
Basic connections
their cases. remote control. the battery compartment in
• Do not bend or heat discs. the indicated direction.
• Do not enlarge the hole in the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs. Approx. 16.4ft / 5 m
• Water droplets may form on discs if they are moved suddenly from
Basic operation
a cold place (outdoors for example) to a warm place, but do not try to
dry them off using a hairdryer, etc.
30°
Cautions on storing discs 30°
Advanced connections
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc. e Put the rear cover back on.
• Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time NOTE
2. Dusty or humid places NOTE
The unit may function improperly or the remote control may not
3. Places exposed to heat from heaters, etc. • Replace the batteries with new ones if the unit does not operate operate if the remote control sensor is exposed to direct sunlight or
even when the remote control is operated close to the unit. strong artificial light from a fluorescent or infrared light.
Cleaning discs
Advanced operations
• The supplied batteries are only for verifying operation.
• If there are fingerprints or dirt on a disc, wipe them off before using • Insert the batteries in the proper direction, following the “q” and
the disc. Fingerprints and dirt can impair sound quality and cause “w” marks in the battery compartment.
interruptions in playback. • To prevent damage or leakage of battery fluid:
• Use a commercially available disc cleaning set or a soft cloth to clean • Do not use a new battery with an old one.
discs. • Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
Explanation of terms
• Do not short-circuit, disassemble, heat or dispose of batteries in
a fire.
• Do not keep the battery in a place exposed to direct sunlight or in
places with extremely high temperatures, such as near a heater.
• If the battery fluid leaks, carefully wipe the fluid off the inside of the
battery compartment and insert new batteries.
• Remove the batteries from the remote control if it will not be used
Troubleshooting
for a long time.
• Dispose of batteries in accordance with local regulations on battery
disposal.
Gently wipe the disc from the
Do not wipe in a circular motion.
inside towards the outside.
Specifications
NOTE
Do not use record spray, antistatic agents, benzene, thinner or other
solvents.
Index
4
ENGLISH
Q5 Q4 Q3
Q6 Q5 Q4 Q3 Q2 Q1
5
ENGLISH
Getting started
Rear panel Remote control
Basic connections
q w OPEN/CLOSE button (5)······························ (9)
e DIG. OUT button·········································· (11)
w r S. MODE button············································ (8)
Q5
e Q6 t DISPLAY button··········································· (10)
Basic operation
y TIME button················································· (10)
r Q7
Q8 u TEXT button············································ (20,22)
t Q9 i Amplifier operation buttons
q w e r ty ui o W0 VOLUME button (+, –)
y W1 INPUT button (d, f)
Advanced connections
MUTE button
u W2
q ANALOG OUT connectors···························· (7) y DIGITAL OUT COAXIAL connector············ (12) o FOLDER buttons·········································· (17)
w EXTERNAL/INTERNAL switch··················· (13) u DIGITAL OUT OPTICAL connector············· (12) (FOLDER d, f)
e REMOTE CONTROL IN / i DIGITAL IN OPTICAL connector················· (12) i Q0 Play button (1)···································· (9,16,17)
OUT connectors············································· (13) o AC inlet (AC IN)·············································· (7) Q1 Track skip buttons (8, 9)····················· (9)
r DIGITAL IN USB port (PC)··························· (13) Q2 Search buttons (6, 7)···························· (9)
Advanced operations
W3
t DIGITAL IN COAXIAL connector················ (12) o Q3 Number buttons (0 – 9)································· (9)
W4 Q4 MENU button··············································· (19)
Q0
Q5 INPUT button················································· (8)
Q1
Q6 DISC button··················································· (8)
W5 Q7 FILTER button ·····································(Not use)
Q2
Explanation of terms
Q8 PROGRAM button······································· (11)
Q9 RANDOM button········································· (10)
W0 CLEAR button·············································· (11)
Q3
W1 REPEAT button············································ (10)
W2 Auto music scan button (AMS)·················· (11)
Troubleshooting
Q4 W3 ENTER button·············································· (19)
W4 Pause button (3)··········································· (8)
W5 Stop button (2)············································· (8)
Specifications
• The supplied remote control can operate Marantz
amplifiers.
• When using it, also refer to the operating
Index
instructions of the other devices.
NOTE
The remote control may not operate some devices.
6
ENGLISH
Basic connections
This chapter explains how to connect the analog device (amp) and
power cord. Analog connection
For other connections, see the sections below.
Amplifier
nn Digital connection (vpage 12) AUDIO
nn PC connection (vpage 13) L R
NOTE
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
L
other components.
R
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Do not bundle power cords together with connection cables.
Doing so can result in humming or noise.
• Do not connect the unit to the PHONO input connectors on the Connecting the power cord
amplifier.
Do not plug in the power cord until all connections have been
completed.
Preparations To household power outlet
(AC 120 V, 60 Hz)
Connecting cables
Select the cables according to the equipment being connected.
Power cord
Audio cables (supplied)
Analog connections (stereo)
(White) L L
(Red) R R
NOTE
Audio cable (supplied)
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
• Do not use a power cord other than the cord supplied with this unit.
7
ENGLISH
Basic operation
Getting started
This chapter explains the procedures required to playback a CD, Before use
Symbols used to indicate buttons in this manual and the various operations that can be performed during CD
Basic connections
playback.
Button located on both the main unit and For other operations, see the sections below.
the remote control BUTTON If a layer in which nothing is recorded is selected, the other layer that
Button only on the main unit <BUTTON> n Playback of MP3 and WMA files (vpage 14) exists on the disc is played back automatically.
Button only on the remote control [BUTTON]
n Playback iPod® (vpage 16) NOTE
n Playing a USB memory device (vpage 17) Sound mode cannot be changed for discs with only a Super Audio
Basic operation
Power
indicator 5 Disc tray n Using as a D/A converter (vpage 18) CD area.
n Performing menu settings (vpage 19)
Turning the power off
Before use Press <ON/STANDBY> or [POWER].
Advanced connections
Power is set to standby and the power indicator lights.
Advanced operations
NOTE
• Do not force the tray in by hand while power is set to standby. This
[POWER] The sound mode can also be set using “SA-CD (Switching sound could cause a trouble.
mode)” (vpage 20) in the setting menu. • Even when power is set to standby, electrical current passes through
[DISC]
1 Turn the power on. some circuits. If you do not intend to use the unit for an extended
[S.MODE] period of time, unplug the power cord from the household power
(Press <ON/STANDBY>.) outlet.
Explanation of terms
2 Press <DISC / INPUT> or [DISC] to set the playback
media mode to “DISC”.
3 Insert a disc.
Press 5 to open and close the disc tray.
Troubleshooting
4 setPress(Super
[S.MODE] and switch to the layer you want to
Audio CD only).
SA-CD CD
Specifications
[Selectable items]
SA-CD : Plays back the 2-channel area of the Super Audio CD
(the default setting).
Index
CD : Plays back the CD layer of the Super Audio CD.
• If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
8
ENGLISH
Symbols used to indicate buttons in this manual Switching the input source Playback CDs
Button located on both the main unit and
the remote control BUTTON
This unit supports the following playback functions in addition to disc Playing Super Audio CDs or CDs
playback.
Button only on the main unit
Button only on the remote control
<BUTTON>
[BUTTON]
• Digital audio input signal playback
• USB memory device file playback from the USB port in the front 1 source
Press <DISC/INPUT> or [DISC] to change the input
to “Disc”.
panel
DISPLAY OFF
indicator
• iPod file playback from the USB port in the front panel
• Computer file playback from the USB port in the rear panel
Before playing back files from a connected device, perform the
2 Insert a disc.
• Press 5 to open and close the disc tray.
<7 / 9> 5 DISC tray 2 1 • When you press 1 and close the Disc tray, “Toc Reading” is
following operation to switch the input source.
displayed in the Display and then playback will start.
[INPUT]
[Selectable items]
USB : Plays back files on the device connected to the USB
4 Press 1.
The “1” display lights, and playback begins.
port (iPod/USB) on the front panel. (vpage 16,17) • When all of the tracks recorded on the disc have finished
playing back, playback stops automatically.
PC : Connect a computer to the USB port (DIGITAL IN) on
[DISC] the rear panel, and use this unit as a D/A converter.
[S.MODE] (vpage 19) Stopping Playback
[DISPLAY] [RANDOM] Coaxial : Connect a digital device to the COAXIAL port (DIGITAL Press 2.
[TIME] [REPEAT] IN) on the rear panel, and use this unit as a D/A
converter. (vpage 19) Stopping Playback temporarily
: Connect a digital device to the OPTICAL port (DIGITAL Press 3.
Optical
IN) on the rear panel, and use this unit as a D/A • The “3” indicator lights.
converter. (vpage 19) • To restart playback, press 1 or 3.
3 [8, 9] Disc : Plays back the disc inside the disc tray. (vpage 9) Fast-Forwarding and Fast-Reversing (Searching)
1 2 GUsing the buttons on the main unitH
The search is started by holding down <8/6>, <7/9>
[6, 7] during playback.
[NUMBER] The search speed can be changed by holding down <8/6>,
(0 – 9) You can press [DISC] to switch the input source to “Disc”. <7/9>.
The search speed changes in 4 steps: 1 2 3 4 1.
4 is the fastest search speed.
9
ENGLISH
Playback CDs
Getting started
Moving to the Beginning of Tracks (Skipping) Turning off display Playing repeatedly (Repeat Playback)
GUsing the buttons on the main unitH During playback, press [DISPLAY]. Press [REPEAT] to select repeat mode.
During playback, press <8/6> or <7/9>. When [REPEAT] is pressed each time, the display switches repeat
• Each time [DISPLAY] is pressed, the display brightness changes
Basic connections
• The disc is skipped the number of tracks equal to the number of modes in the following order.
times the button is pressed. as shown below.
• When you press <8/6> once, playback restarts from the 1 RPT RPT
Bright Dimm Dark
beginning of the current track. 1-track repeat All-track repeat
Basic operation
During playback, press [8] or [9]. Off
Repeat off
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
GSelectable itemsH
• When you press [8] once, playback restarts from the beginning
When the display is switched off, the “DISPLAY OFF” indicator lights. RPT (All-track repeat) :A
ll tracks are played repeatedly.
of the current track.
Advanced connections
1 RPT (1-track repeat) :O
nly 1 track is played repeatedly.
Playing a Specific Track (Direct searching) NOTE Not Displayed
Press [NUMBER] (0 – 9) to select the track. During stop mode, the display information does not turn off. The :N
ormal playback resumes.
(Repeat off)
GExampleH : Track 4 : Press number [4] to select Track No. 4. information is turned off only during playback.
GExampleH : Track 12 : Press numbers [1] and [2] consecutively to
select Track No. 12.
To change time display When repeat playback is set, random playback and AMS playback
Advanced operations
cannot be performed.
The number you enter is set about 1.5 seconds after you press the Press [TIME].
number buttons. To enter a two-digit number, be sure to press the • When [TIME] is pressed each time, the display shows differently
two number buttons, one immediately after the other. in the following orders. Playing in random order
Not Displayed REMAIN (Random playback)
1 During stop mode, press [RANDOM].
Track elapsed time Track remaining time
Explanation of terms
The “RNDM” indicator on the display lights.
REMAIN TTL
2 Press 1.
Total remaining time
The tracks start playing in random order.
Troubleshooting
Stopping Random Playback
Plug the headphones into the headphone jack (PHONES). Press [RANDOM] during stop mode.
The “RNDM” indicator on the display goes off.
Specifications
Turn <LEVEL>. Repeat Play and AMS Play cannot be conducted when the unit is in
Random Mode.
NOTE • If <7/9>, or [9] are pressed during Random Play, the player
To prevent hearing loss, do not raise the volume level excessively jumps to the next track of the shuffled order.
• To search through the current track during random play, press and
Index
when using headphones.
continue holding <8/6, 7/9> or press [6, 7].
10
ENGLISH
Playback CDs
Symbols used to indicate buttons in this manual
Button located on both the main unit and Playing tracks in a specific order Searching for a specific track (AMS play)
the remote control BUTTON (Program playback) You can play back all track intros, from the first track onward, in
Button only on the main unit <BUTTON> sequence. This function is useful when you search for a specific track
Button only on the remote control [BUTTON]
1 During stop mode, press [PROGRAM].
• “PROG” lights in the display, and the mode switches to
you want to listen to. (AMS playback: Auto Music Scan playback)
<7 / 9> 5 1
program playback mode.
1 During playback or stop mode, press [AMS].
• “1” flashes in the display, and 10-second AMS playback
2 When
To program tracks 3 and 12 to be played in that order, press [3], you find the track you want to listen to, press
[1], and [2] one after the other.
• The number you enter is set about 1.5 seconds after you
1.
The Play indicator “1” lights and normal playback is resumed.
press the number buttons.
<8 / 6> 3
3 Press 1.
Playback starts in the programmed order.
NOTE
AMS playback cannot be performed during program playback and
random playback.
[CLEAR]
5 To enter a two-digit number, be sure to press the two number buttons,
one immediately after the other.
Setting the digital output
[DIG.OUT] Set to output from the rear panel DIGITAL OUT terminal (COAXIAL,
OPTICAL).
Adding tracks for program playback
Tracks can be added to the end of program when program is remaining During stop mode, press [DIG. OUT].
(“PROG” indicator is lighting up) and in stop mode.
[AMS] Each time [DIG.OUT] is pressed, output from the DIGITAL OUT terminal
(COAXIAL, OPTICAL) on the rear panel is switched between “On” and
Canceling a track from program playback “Off”.
While stopped, press [CLEAR].
When [CLEAR] is pressed, tracks are deleted in order from the last GSelectable itemsH
programmed track.
[8, 9] On : Outputs the digital signal.
1 Clearing the all programmed track Off : Digital signal is not output.
During program playback, press 2 twice.
During stop mode, press 2 once.
[NUMBER] Program can also be cleared by pressing 5 to open the disc tray.
(0 – 9) • When digital output is turned off, the “D OFF” indicator lights up on
the display.
You can specify up to 24 tracks each for program playback. • When digital output is turned off, you can enjoy high quality audio
output from the ANALOG OUT terminal.
NOTE • The “digital output off” has a memory retention function where
• Repeat Play, Random Play, and AMS Play cannot be conducted while the settings remain stored and unchanged even when the disc is
the unit is in PROGRAM mode (i.e. when the PROG indicator is lit). changed or the power is turned off.
• Programmed playback is not possible with MP3 and WMA files. NOTE
• The program playback mode is canceled if you set power to standby,
turn off power, or open the disc tray. Data on Super Audio CDs or WMA/MP3 data on discs cannot be
output from the DIGITAL OUT terminal.
11
ENGLISH
Advanced connections
Getting started
This chapter describes how to connect a digital device, USB
memory device/iPod, computer, and remote control. Digital connection
Basic connections
For other connections, see the sections below.
When connecting, use a commercially available optical digital cable or
nn Analog connection (vpage 7)
coaxial digital cable. Digital audio input
nn Connecting the power cord (vpage 7) Digital audio output If a device equipped with CD transport or digital audio output is
connected to this unit, this unit can be used as a D/A converter.
You can enjoy digital recording when the player is connected to a CD (“Using as a D/A converter” (vpage 18))
Basic operation
recorder or other digital recording component.
Preparations
CD recorder /
Connecting cables MD recorder
OPTICAL COAXIAL
Select the cables according to the equipment being connected.
Advanced connections
IN IN
Audio cables
Optical digital connections
Advanced operations
Coaxial digital connections Coaxial digital connection cable (Sold separately)
Signal flow
Coaxial digital cable (sold separately)
NOTE
iPod connections Signals on the HD layer of the super audio CD and MP3 or WMA signals
Explanation of terms
recorded onto the disc cannot be output in digital output. Signals that
can be output using digital output are digital audio signals from audio
CDs, CD-layers of super audio CDs, USB, iPod, PC, COAXIAL, and
OPTICAL.
iPod cable (sold separately) CD Transport or digital device etc.
PC connections
Troubleshooting
When connecting the optical digital output connector
NOTE
with an optical transmission cable (sold separately)
USB cable (sold separately) • Linear PCM signals with a sampling frequency of 32kHz, 44.1kHz,
48kHz, 64kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz can be input
into this device.
Specifications
Remote control connection
• Do not input signals other than linear PCM signals, such as Dolby
digital, DTS, AAC etc. into this device. Doing so may cause noise,
which may cause damage to the speakers.
Remote connector cord (supplied)
Match the shapes then insert firmly.
Index
12
ENGLISH
Signal flow
Type A
13
ENGLISH
Getting started
When you use this unit connected to a Marantz amplifier, this unit
receives operation signals sent from the amplifier and operates
accordingly.
Symbols used to indicate buttons in this manual Playback of MP3 and WMA files
Basic connections
Button located on both the main unit and There are many music distribution sites on the Internet allowing you
n Connection the remote control BUTTON to download music files in MP3 or WMA (Windows Media® Audio)
Use the supplied remote connection cable to connect the REMOTE formats. The music (files) downloaded from such sites can be stored
Button only on the main unit <BUTTON>
CONTROL IN terminal of this unit to REMOTE CONTROL OUT on CD-R or CD-RW discs and played on the unit.
Button only on the remote control [BUTTON]
terminal of the amplifier.
“Windows Media” and “Windows” are registered trademarks or
n Setting
Basic operation
trademarks of Microsoft Corporation in the United States and other
Set the remote control switch on the rear panel of this unit to countries.
“EXTERNAL” to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote MP3 and WMA formats
sensor of the amplifier.
Advanced connections
CD-R and CD-RW discs created in the format described below can
be played.
To use this unit without connecting it to the amplifier, set the remote
n Writing software format
control switch to “INTERNAL”. <ON/STANDBY> ISO9660 level 1, 2
Expansion format (Juliet.Romeo)
• When written in other formats, it may not be possible to play the
disc properly.
Advanced operations
n Maximum number of playable files and folders
Before playback using a USB Total number of folders and files : 648
Number of folders : 299
memory device or iPod n File formats
1 Press <ON/STANDBY>. MP3 (MPEG-1 Audio Layer-3)
Explanation of terms
WMA (Windows Media Audio)
Set to “EXTERNAL.” The unit
n Tag data
2 Connect the USB memory device or iPod cable to
the USB terminal.
ID3-Tags (Ver. 1.x and 2.x)
META-Tags
(Compatible with title, artist and album names)
Remote connector cord Signal flow NOTE
Troubleshooting
(supplied) • When a USB memory device is connected to this unit, the files Playable MP3/WMA fi le
recorded onto the USB memory device are read. The time needed ampling
S
File format Bit rate Extension
to read the files depends on the size of the files on the USB memory frequency
device. If the maximum number of files and folders are recorded For MPEG-1 Audio
Amplifier onto the device, it may take a few minutes to read all of the files. Layer-3,
Specifications
• To turn off the power to this unit, stop playback on the USB memory MP3 44.1 kHz 32/40/48/56/64/80/96/ .mp3
device or iPod before turning the power off. 112/128/160/192/224/
256/320 kbps
48/64/80/96/128/160/
WMA 44.1 kHz .wma
192 kbps
Index
14
ENGLISH
Button located on both the main unit and MP3 or WMA playback order of MP3 or
the remote control BUTTON • Only music files that are not copyright-protected can be played on
this unit.
WMA files
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON] • Be sure to give files the extension “.MP3” or “.WMA”. Files with When there are multiple folders containing MP3 or WMA files, the
any other extensions or with no extensions cannot be played. playback order of folders is automatically set when this unit reads the
• In accordance with copyright laws, recordings you have made should media. The files in each folder are played back in the order in which
only be used for your personal enjoyment and may not be used in the files were recorded on the media, from the oldest date and time.
<7 / 9> 1 other ways without permission of the copyright holder.
1 2
[MENU]
15
ENGLISH
Playback iPod®
Getting started
With the unit, you can listen to music on an iPod and you can also
operate the iPod with the main unit or the remote control. Playing an iPod® nnRemote control and iPod button relations
1 source
Press <DISC/INPUT> or [INPUT] to change the input Remote
Basic connections
to “USB”. control iPod buttons Operation on the unit
buttons
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod or
2 Connect the iPod to the USB terminal on the front
panel of this unit. (vpage 13)
1
3
13
13
Plays the track
Pause
iPhone, respectively, and has been certified by the developer to 2 – Return to the first track in the folder
Basic operation
meet Apple performance standards. Apple is not responsible for the nnSelect the mode to control Skip to previous or next track
operation of this device or its compliance with safety and regulatory Fast forward and rewind cannot be
3 Press
8, 9 8, 9
standards. [MENU], select “iPod Setup” using [8] and used
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch [9], and press [ENTER] (vpage 19). REPEAT – Switches the repeat function
are trademarks of Apple Inc., registered in the U.S. and other
4 Select
Advanced connections
countries. “iPod Ctrl” using [8] and [9], and press RANDOM – Switches the shuffle function
• Individual users are permitted to use iPhone, iPod, iPod classic, [ENTER]. (vpage 22) Plays the first 10 seconds of the
iPod nano, iPod shuffle, and iPod touch for private copy and AMS –
track, then skips to the next track
playback of non-copyrighted contents and contents whose copy
and playback is permitted by law. Copyright infringement is
prohibited by law.
5 Use [8] and [9] to select the mode. TEXT – Displays the file name
Advanced operations
1. Direct : Control using the iPod. • Marantz will accept no responsibility whatsoever for any loss of iPod
data.
2. Remote : Control using this unit and the remote control.
• Depending on the type of iPod and the software version, some
functions may not operate.
Display mode 1. Direct 2. Remote
nnTo Switch the Display
Display location iPod display Main unit display
During playback, press [TEXT].
Explanation of terms
Playable Audio file S S The display switches each time the button is pressed.
files Video file S A
Title name Artist name
Remote control
Active and Main unit S S
buttons (This unit)
Album name
iPod S A
Troubleshooting
Disconnecting the iPod
nnSelect the Database to playback
1 Press 2.
4 Select “Database” using [8] and [9], display
Specifications
the database of the file you want to playback, and
press [ENTER]. (vpage 21)
Index
Playback starts.
16
ENGLISH
Symbols used to indicate buttons in this manual Playing a USB memory device
Button located on both the main unit and
the remote control BUTTON Playable USB memory formats Playing files stored on USB memory devices
Button only on the main unit
Button only on the remote control
<BUTTON>
[BUTTON]
Files created in the following formats and stored on a USB memory
device can be played. 1 input
Press <DISC/INPUT> or [INPUT] to change the
source to “USB”.
n USB-Compatible file systems
<7 / 9> 2 1
“FAT16” or “FAT32”
• If the USB memory device is divided into multiple partitions, only 2 Connect the USB memory device to the USB
terminal on the front panel of this unit. (vpage 13)
the top drive can be selected.
Getting started
Playing repeatedly (Repeat playback) Digital audio signals input from an external device or computer into
Press [REPEAT]. this unit can be converted and output as analog signals using this unit. Connecting and playing back from a
Playing in random order (Random playback)
(D/A converter) computer (USB)
Basic connections
Connect a computer to the USB port on the rear panel of this unit
Press [RANDOM]. Connect and playback from a digital device in advance. For details on how to connect the computer, see “PC
• Random playback will automatically start.
• To cancel random playback, press [RANDOM] or 2. The “RAND” (Coax/Opt) connection” (vpage 13).
indicator goes dark and random playback is canceled.
Press <DISC/INPUT> or [INPUT] to change the input Press <DISC/INPUT> or [INPUT] to change the input
Basic operation
Switching the Display source to “Coax” or “Opt”. source to “PC”.
During playback, press [TEXT]. When “PC: xxkHz” is displayed on this unit, wait for approximately
The input digital audio signal is displayed as shown. 10 seconds, and then start and operate the music playback software
“Coax : xxxx“ on the computer.
Switching the Time Display “Opt : xxxx“ This unit functions as a D/A converter.
Advanced connections
During playback, press [TIME]. xxxx indicates the sampling frequency.
NOTE NOTE
NOTE • Perform operations such as playback and pause on the computer. At
• Marantz will take no responsibility whatsoever for any loss or
damage to data on a USB memory device when using it connected • Linear PCM signals with sampling frequencies of 32 kHz, 44.1 kHz, this time, you cannot operate the computer with the unit's keys or
to the unit. 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz can be remote control.
• USB memory devices will not work via a USB hub. input in the unit. • You can also control the volume and equalizer on the computer.
• Do not input non-PCM signals, such as Dolby Digital, and DTS. This
Advanced operations
• Marantz does not guarantee that all USB memory devices will Enjoy playing music at the desired volume.
operate or be suppled power. When using a USB portable hard disk causes noise and could damage the speakers. • When this unit is functioning as a D/A converter, sound is not output
that can draw power from an AC adapter, we recommend using the • If the sampling frequency switches, such as from A mode to B mode from the computer's speakers.
AC adapter. in a CS broadcast, muting may operate for 1-2 seconds, cutting the • If the computer is disconnected from this unit while the computer
sound. music playback software is running, the playback software may
Removing the USB memory device When the mode has been changed to disc input mode
freeze.Always exit the playback software before disconnecting the
computer.
Explanation of terms
Press 2 to stop playback. Press <DISC/INPUT> or [DISC]. • If an error occurs on the computer, restart the computer while it is
still connected to the USB port of this unit.
• The supported sampling frequencies are 32/44.1/48/96 kHz.
Troubleshooting
NOTE
OS
Do not pull out the USB memory device if the communication indicator
• Windows® XP Service Pack2 or more, Windows Vista or Windows 7
on the USB memory device is still flashing. Doing so may damage the
• Macintosh OSX 10.6.3
USB memory device and the data recorded on the device.
Specifications
Software
• Server software supporting Windows Media Player and iTune.
USB
Index
• USB 2.0: USB Full speed/USB Audio Class1
18
ENGLISH
2 want to set.
Press [8] or [9] to select the menu item you 1 Insert the media to playback into the unit.
TIMER play
2 press
Select “TIMER Play=>” using [8] and [9], and
[ENTER].
Getting started
SA-CD (Switching sound mode) USB Setup (USB memory device operation)
nnSwitching “Start Sound Mode”
The USB memory device works in the following hierarchical logic. 4 Press [MENU].
The display exits.
Basic connections
The Start Sound Mode can be switched over in the following • Press the [TEXT] during normal playback to view selected file information.
USB Setup=> File Info=> 1 File Name*
hierarchical scheme. • Press the [TEXT] again to view the track title. If “track title” was
2 Title the selected file information option, then the artist name will be
2 and
Basic operation
Select the layer to playback using [8] and [9], 5 Time
Track Title Artist Name Album Name
press [ENTER]. Range Spec=> 1 All*
2 Folder
GSelectable itemsH Resume=> 1 Off* File Name
SA-CD :
Advanced connections
2 On
If a Super Audio CD hybrid layer disc is inserted, the Super Audio CD
layer is read. (default mode) * Default setting
Switch to the CD layer by pressing the [S.MODE]. nnRange Spec. (Selecting a range of files to be
Switch back to the Super Audio CD layer by pressing the [S.MODE]
nnFile Info (File information display selection) played)
once again.
You can view MP3 tags and other file information when playing a You can select whether all files in USB memory device or the files
CD : USB memory device. in a specific folder are to be played.
Advanced operations
If a Super Audio CD hybrid layer disc is inserted, the CD layer is
read.
Sound Mode cannot be switched even if the [S.MODE] is pressed. 1 Select “USB Setup =>” using [8] and [9], and
press [ENTER]. 1 Select “USB Setup =>” using [8] and [9], and
press [ENTER].
If a disc with only a Super Audio CD area is inserted, the Super
Audio CD layer is read.
2 Select “File Info =>” using [8] and [9], and
press [ENTER]. 2 press
Select “Range Spec =>” using [8] and [9], and
[ENTER].
3 Press [MENU].
Explanation of terms
Saves the Start Sound Mode settings.
3 Select the information you want to display using
[8] and [9], and press [ENTER]. 3 and
Select the range you want to playback using [8]
[9], and press [ENTER].
NOTE
GSelectable itemsH GSelectable itemsH
Menu settings cannot be adjusted when the unit is in Repeat Play or
1.File Name : The file name is displayed. : Plays
back all of the files on the USB memory device.
Random Play modes. 1. All
Troubleshooting
2. Title : The track name is displayed. 2. Folder : Plays
back the files in the selected folder.
3. Artist : The artist name is displayed.
4. Album : The album name is displayed. 4 Press [MENU].
The playback range settings are saved.
5. Time : The time information is displayed.
Specifications
Index
20
ENGLISH
2 press
3 Genre
Select “Resume =>” using [8] and [9], and
[ENTER]. 4 Playlist
5 Track
4 Press [MENU].
Saves the resume playback settings.
2 Remote
NOTE
This setting can be made when “iPod Ctrl” is set to “Remote”.
21
ENGLISH
Getting started
nnFile Info (File information display selection) nniPod Ctrl (Operating an iPod with its own controls) nnResume (Playing tracks from where they were
You can view file information when playing iPod files. You can specify whether operation of an iPod is performed with its previously stopped)
own controls or from this unit.
1 1
Basic connections
Select “iPod Setup =>” using [8] and [9], and Select “iPod Setup =>” using [8] and [9], and
press [ENTER].
1 press [ENTER].
Select “iPod Setup =>” using [8] and [9], and press [ENTER].
Basic operation
3 Select the information you want to display using
3 Select On or Off for the resume playback settings
[8] and [9], and press [ENTER].
GSelectable itemsH
3 Select the device that you want to control using [8]
and [9], and press [ENTER].
using [8] and [9], and press [ENTER].
GSelectable itemsH
GSelectable itemsH 1. Off : Resume
playback is not set.
Advanced connections
1. Title : The track name is displayed.
1. Direct : Control using the iPod. 2. On : Resume
playback is set.
2. Artist : The artist name is displayed.
4 Press [MENU].
2. Remote : Control using this unit and the remote control.
3. Album : The album name is displayed.
Advanced operations
The settings are saved.
NOTE Playback will be resumed from the beginning of the current file.
• Press the [TEXT] during normal playback to view selected file With the “1 Direct” setting, you can use the Play, Pause, Next,
information. Previous, and Stop commands from the remote control. Auto STB (Auto standby mode)
• Press the [TEXT] again to view the track title. If “track title” was When a 1G Nano or 5G iPod is connected with the “1 Direct” setting,
With Auto Standby On, you can automatically set this unit to standby
the selected file information option, then the artist name will be the setting will be automatically changed to “2 Remote” as these
mode after the unit is in stop mode continuously for about 30 minutes
displayed. models do not support this function.
Explanation of terms
(no operation).
• Each time the [TEXT] is pressed, the displayed information changes
1 press
in the following order:
Select “Auto STB =>” using [8] and [9], and
Track Title Artist Name [ENTER].
Troubleshooting
Album Name
GSelectable itemsH
NOTE On : Enable
Auto Standby mode.
This setting can be made when “iPod Ctrl” is set to “Remote”.
Off : Disable
Auto Standby mode.
Specifications
3 Press [MENU].
Saves the auto standby function settings.
Index
NOTE
When the Input Source of this unit is set to “PC”, the Auto STB
function may not work properly depending on the applications of your
PC.
22
ENGLISH
Explanation of terms
B W
Bit rate WMA (Windows Media Audio)
This expresses the read amount per 1 second of video/audio data This is audio compression technology developed by Microsoft
recorded in a disc. Corporation.
WMA data can be encoded using Windows Media® Player Ver.7, 7.1,
M
Windows Media® Player for Windows® XP and Windows Media®
MP3 (MPEG AudioPlayer 3) Player 9 Series.
This is an internationally standardized audio data compression scheme, To encode WMA files, only use applications authorized by Microsoft
using the “MPEG-1” video compression standard. It compresses the Corporation. If you use an unauthorized application, the file may not
data volume to about one eleventh its original size while maintaining work properly.
sound quality equivalent to a music CD.
S
Sampling frequency
Sampling involves taking a reading of a sound wave (analog signal)
at regular intervals and expressing the height of the wave at each
reading in digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is
to the original.
Super audio CD
There are three types of Super Audio CDs:
q Single layer discs
Single layer Super Audio CD with just an HD layer.
w Dual layer discs
Super Audio CD with a double HD layer, offering extended
playing time and high sound quality.
e Hybrid discs
Two-layer Super Audio CD with an HD layer and a CD layer.
The signals on the CD layer can be played on a regular CD
player.
23
ENGLISH
Troubleshooting
Getting started
If a problem occurs, first check the following: Problem Cause Corrective action Page
1. Are the connections correct?
Remote control • The distance between this unit • Move closer to this unit, and 4
Basic connections
2. Is the unit being operated as described in the owner’s manual?
If this unit does not operate properly, check the items listed in the table below. If the problem persist there operation is not and the remote control is too operate the remote control
may be a malfunction. possible. great. within the operating range.
In this case, disconnect the power immediately and contact the retail outlet. • There is an obstacle between • Remove the obstacle. 4
this unit and the remote
control.
Problem Cause Corrective action Page
Basic operation
• The remote control’s batteries • Replace all batteries with 4
The disc fails to rotate. • The power cord is pulled out of • Insert the power cord plug 7 are dead. new ones.
the socket. into the socket.
• A strong light is hitting the • Do not let strong light hit the 4
• Power to this unit is not ON. • Turn the power to this unit 8 unit’s sensor window. sensor window.
ON.
• The switch on the back of the • When using this unit 14
Advanced connections
• The disc is not placed in the • Place the disc in the disc tray 3 REMOTE CONTROL is on independently, set the switch
correct position on the disc correctly. EXTERNAL. to INTERNAL.
tray.
CD-R/CD-RW disc • The disc is placed in upside • Place the disc in the tray 3
• The disc is placed in upside • Place the disc in the disc tray 3 cannot be played. down. correctly.
down. (The disc is placed in correctly.
with the label facing down). • The information recorded is • Record correct information 14
not in an audio (CD-DA) format. that is compatible with to this
The disc stops rotating • The disc is dirty. • Clean the disc’s surface. 4 Or the MP3/WMA file was not unit.
Advanced operations
in mid-operation. • The disc is scratched. • The disc may be unable to – properly recorded.
be played if it has a lot of Cannot switch the • Start Sound Mode is set to CD. • Change Start Sound Mode 20
scratches. sound mode of an SA- setting to Super Audio CD.
• The disc is warped. • The disc may be unable to be – CD hybrid layer disc.
played if it is badly warped. Sound is too quiet when • The PC volume is turned down. • Turn the PC volume up. 18
The disc is rotating but • The amplifier and speakers are • Connect the cables correctly. 7 signals are output from
Explanation of terms
no sound is heard. not connected correctly. (See the instruction manual a PC.
for the amplifier.)
• The amplifier power is not ON. • Turn ON the power to the –
amplifier.
(See the instruction manual
for the amplifier.)
Troubleshooting
• The amplifier’s function or • Switch the amplifier’s –
selector switch is not set to function or selector switch
“CD” or “AUX” or such (to to “CD” or “AUX” or such
whatever you have connected (to whatever you have
this unit to). connected this unit to).
(See the instruction manual
Specifications
for the amplifier.)
• The amplifier’s volume control • Adjust the amplifier volume. –
is set at the minimum level. (See the instruction manual
for the amplifier.)
Index
24
ENGLISH
GUSB memory device/iPodH
Problem Cause Corrective action Page Problem Cause Corrective action Page
“OverCurrent” appears • The voltage able to be supplied • The USB memory device – The sound of the iPod • The amplifier and speakers are • Connect the cables correctly. –
on the display. from this unit via the USB is not supported. Please being connected is not not connected correctly. (See the instruction manual
memory device has been use a USB memory heard. for the amplifier.)
exceeded. device with an operating • The amplifier power is not ON. • Turn ON the power to the –
current that is less than amplifier. (See the instruction
1 A. manual for the amplifier.)
“FAT Error” or “Cluster • An unsupported file system • Please use a USB memory – • The amplifier’s function or • Switch the amplifier’s –
Err” appear on the is being used. USB memory device formatted with a selector switch is not set to function or selector switch
display. device below 128 MB cannot compatible file system “CD” or “AUX” or such (to to “CD” or “AUX” or such
be supported. (FAT32 or FAT16) and that has whatever you have connected (to whatever you have
at least 256 MB of memory. this unit to). connected this unit to).
“No File” appears on • No file able to be played on this • Check supported formats. 14, 17 (See the instruction manual
the display. unit exists. for the amplifier.)
“DRM Stream” • This is a file subject to digital • Cannot play on this unit 15, 17 • The amplifier’s volume control • Adjust the amplifier volume. –
appears on the display. rights management. because of unsupported is set at the minimum level. (See the instruction manual
DRM. for the amplifier.)
The sound of the USB • The amplifier and speakers are • Connect the cables correctly. –
memory device being not connected properly. (See the instruction manual Reading of USB • When connecting a high- • Wait until reading is –
connected is not heard. for the amplifier.) memory device takes capacity USB memory device, completed.
• The amplifier power is not ON. • Turn the amplifier power ON. – time. it will take time to read
(See the instruction manual depending on its capacity.
for the amplifier.) Several minutes may be
required for reading when
• The amplifier’s function or • Switch the amplifier’s –
using a high-capacity device.
selector switch is not set to function or selector switch
“CD” or “AUX” or such (to to “CD” or “AUX” or such
whatever you have connected (to whatever you have
this unit to). connected this unit to).
(See the instruction manual
for the amplifier.)
• The amplifier’s volume control • Adjust the amplifier volume. –
is set at the minimum level. (See the instruction manual
for the amplifier.)
25
ENGLISH
Specifications Index
Getting started
vvNumerics vvI
nn Audio performance [Super Audio CD] [CD]
1-track repeat······················································ 10 INTERNAL··························································· 14
Basic connections
• Analog output
Channels: 2 channels 2 channels iPod Setup··························································· 21
Playable frequency range: 2 Hz – 100 kHz 2 Hz – 20 kHz vvA
Playable frequency response: 2 Hz – 50 kHz (–3 dB) 2 Hz – 20 kHz All-track repeat···················································· 10 vvM
S/N: 112 dB (Audible range) 110 dB AMS play····························································· 11 MP3··················································· 14, 15, 17, 23
Dynamic range: 110 dB (Audible range) 100 dB
Harmonic distortion: 0.001 % (1 kHz, Audible range) 0.002 % (1 kHz)
Analog connection················································· 7 Music CDs····························································· 3
Basic operation
Wow & flutter: Crystal accuracy Crystal accuracy Auto standby mode············································· 22
• Output level vvP
Unbalanced: 1.8V RMS stereo 2.4V RMS stereo vvB Playback
Headphone output: 43mW (variable maximum) 43mW (variable maximum) Batteries································································ 4 Playback CDs······················································ 9
• Digital output
Bit rate····················································· 14, 17, 23 Playback iPod···················································· 16
output level (cinch JACK): — 0.5 Vp-p (75 Ω)
Advanced connections
output level (optical): — -19 dBm Program playback···············································11
• Optical Readout System vvC Random playback·········································10, 18
Laser: AlGaAs AlGaAs Cable······························································· 7, 12 Repeat playback···········································10, 18
Wave length: 650nm 780nm Audio cables·················································· 7, 12 Stopping playback········································· 9, 17
Signal type: 1-bit DSD 16-bit linear PCM Stopping playback temporarily······················ 9, 17
Coaxial digital cable·········································· 12
Sampling frequency: 2.822 MHz 44.1 kHz
iPod cable························································· 12 USB playback···················································· 17
nn General Optical cable····················································· 12 Playback layer························································ 8
Power cord·························································· 7 Power cord···························································· 7
Advanced operations
Power supply: AC 120 V, 60 Hz
Power consumption: 25 W Remote connector cord······························ 12, 14 Program playback················································ 11
Standby: 0.3 W or less USB cable························································· 12
Maximum external dimensions: 17 3/8 (W) x 4 5/16 (H) x 13 9/16 (D) inchs CD-R/CD-RW··················································· 3, 15 vvR
(440 (W) x 109 (H) x 344 (D) mm)
Connections Random playback·········································· 10, 18
Weight: 17.2 lbs (7.8 kg)
Operating temperatures: +5˚C ~ +35˚C
Analog connections············································ 7 Remote control····················································· 6
Operating humidity: 5 ~ 90% (without dew) Coaxial digital connections······························· 12 Inserting the batteries········································· 4
Explanation of terms
Connecting cables········································· 7, 12 Remote control connection································· 14
iPod··································································· 13 Repeat playback············································ 10, 18
bbFor purposes of improvement, specifications and design are subject to change without notice. Optical digital connections································ 12
PC····································································· 13 vvS
Power cord·························································· 7 Sampling frequency································ 14, 17, 23
Remote control················································· 14 Searching························································ 9, 17
USB memory device········································· 13 Skipping······························································· 10
Troubleshooting
Stopping playback··········································· 9, 17
vvD Super Audio CD··············································· 3, 23
Direct searching·················································· 10 Switching the input source··································· 9
Display································································· 10
vvT
Specifications
vvE Timer play setting················································ 19
EXTERNAL·························································· 14
vvW
vvF WMA················································· 14, 15, 17, 23
Fast-forwarding··············································· 9, 17
Index
Fast-reversing·················································· 9, 17
Finalize·································································· 3
26
• SA8004 (unit: inchs(mm))
7/16
(10) 13 9/16 (344)
1 3/8
(34)
17 3/8 (440)
4 5/16
3 5/8
(109)
(92)
– +
11/16
(17)
4..SA8004U_backcover.indd 2 2010/07/02 10:17:03
D&M Holdings Inc.
Printed in China 5411 10495 020M