Documente Academic
Documente Profesional
Documente Cultură
each flip-flop
all flip-flops and gates
the flip-flops only with gates
only circuit gates
1 points
Question 2
a Karnaugh map
DeMorgan's second theorem
the commutative law of addition
the associative law of multiplication
1 points
Question 3
50 kHz
100 kHz
100/17 kHz
1000/7.07 kHz
1 points
Question 4
1 points
Question 5
795 mV
395 mV
79.5 mV
39.5 mV
1 points
Question 6
1 points
Question 7
1. A series RLC circuit has a series resonant frequency of 12,000 Hz. If R = 5 ohms
and XL at resonance is 300 ohms, find the bandwidth.
200 Hz
250 Hz
150 Hz
100 Hz
1 points
Question 8
5 ohms
6 ohms
3 ohms
7 ohms
1 points
Question 9
Ri = ∞, AV = ∞, Ro = 0
Ri = 0, AV = ∞, Ro = 0
Ri = ∞, AV = ∞, Ro = ∞
Ri = 0, AV = ∞, Ro = ∞
1 points
Question 10
1. When collector flows for approximately 120 of the input signal, the amplifier is
Class A
Class AB
Class B
Class C
1 points
Question 11
selection of the IC
arithmetic or logic function
data word selection
clock frequency to be used
1 points
Question 12
1 points
Question 13
Copper
Iron
Lead
Aluminum
1 points
Question 14
1. An uncharged capacitor of 0.2 micro Farad is connected to a 100 V, d.c. supply
through a resistor of 100 kilo ohms. Determine the capacitor voltage 10 ms after
the voltage has been applied.
39.35 V
35.39 V
53.42 V
46.98 V
1 points
Question 15
1 points
Question 16
Class A
Class AB
Class B
Class C
1 points
Question 17
1 points
Question 18
< 3 mW
<1W
< 10 mW
< 10 mW
1 points
Question 19
+12810 to –12810
–12810 to +12710
+12810 to –12710
+12710 to –12710
1 points
Question 20
symbolic reduction
TTL logic
using Boolean algebra
using a truth table
1 points
Question 21
1. What is the logic circuit having two or more inputs but only one output with high
output if any or all inputs are high, with low input only when all inputs are low?
AND gate
OR gate
NOR gate
NAND gate
1 points
Question 22
Admittance
Conductance
Reluctance
Resistance
1 points
Question 23
1. When the base resistor decreases, the collector voltage will probably
Decrease
Stay the same
Increase
All of the above
1 points
Question 24
1. The two's complement system is to be used to add the signed numbers
11110010 and 11110011. Determine, in decimal, the sign and value of each
number and their sum.
1 points
Question 25
1. When multiplying in binary the decimal values 13 × 11, what is the third partial
product?
100000
100001
0000
1011