Documente Academic
Documente Profesional
Documente Cultură
Scroll down and Select “Licensing Portal India” on bottom right of the
webpage.
2) Download, Save and Install the appropriate “CodeMeter Control Center” as per your
operating system. (example: CodeMeter Runtime-Kit 5.21b for Windows 32 and 64 Bit (27.9 MB) file of 28MB for
MS Windows OS )
Please Note: Install “CodeMeter Control Center” on customer PC or laptop which will used to
update the license file on the USB Stick (Dongle) using internet.
Please Note: This procedure should be performed only once on FSE Laptop (first installation)
3) (A) Turn OFF the digitiser (CR 10-X) and remove the USB drive (B) as shown below.
4) Connect the USB drive (Dongle) to your laptop (FSE laptop)
5) Run “CodeMeter Control Center” from Program Files and click “WebAdmin”
6) Click Update (Please don’t change the options, it should be as shown below)
2015-07-
System Time
02
(PC):
00:23:36
System Time 2015-07-
(CmContainer) 02
: 00:23:37
Certified Time 2015-07-
(CmContainer) 02
: 00:23:33
(Please Note: Make sure customer details displayed on the webpage are matching
with the site address of the premises and actual location of installation. In case of any
mismatch or discrepancy kindly inform local Agfa Service representative)
12) Please Note and manually update the PC Service Tag from NX PC at site and
Dongle ELMS from NX Dongle and click Save
13) Ensure that “Updated Successfully” message appears and only then click on
Generate License
14) Scroll down further and click on “Activate Selected Licenses Now” as shown below
The system will complete the download process and show the following
15) Only on receiving “License Transfer completed successfully” remove the USB dongle
from PC/Laptop and connect to digitizer before Power ON.
16) Continue with remaining installation (Refer CR 10-X Installation manual)
Please Note: Installation Engineer must assist the owner (customer) to generate the first
license from the EPS Portal as mentioned from Step No. 8 to 15 of this manual.
Customer has to use the credentials “User Id” and “Password” shared by Agfa HealthCare.