Documente Academic
Documente Profesional
Documente Cultură
Slickline Tools
The Hunting ExCro tester is a very safe and convenient tool. Whether testing
the integrity of a rope socket, or pull testing a slickline the principle is the same.
The wire is made up to a rope socket and loaded into the tester. The wire is then
clamped in place, using the appropriate clamp jaws (jaws for .108, .125, .160.
3/16, 7/32 and 5/16 are supplied).
Once set up, testing is a very straightforward procedure: The piston is activated
using a hydraulic hand pump to apply the appropriate load to the wire and the
load is monitored through the pressure gauge on the pump. One PSI of hydraulic
pressure applied to the piston equals one pound of linear tension on the wire.
While the test is under way, the short section of wire which is under tension is
held within the body of the tool, making it completely safe. The base unit weighs
only 25Kg so it is fully portable and ready to use anywhere. It does not require
any special tools. Virtually any rope socket can be used, straight out of
the toolbox.
w. www.hunting-intl.com | e. well.intervention@hunting-intl.com