Documente Academic
Documente Profesional
Documente Cultură
From: ttrentler
Very simply Extension mobility allows users to have temporary access to other physical
phones connected to CME and have all of their personal settings such as lines(directory
numbers), speed dials and XML services as if they were sitting at their own desk. Extension
mobility is also used in desk "hoteling" environments where during the course of a day
multiple people may use a phone. An example could be a 24x7 call center where 3 users
each with and 8 hour shift use the same desk.
Postings may contain unverified user-created content and change frequently. The content is provided as-is and
is not warrantied by Cisco.
1
Configuring Extension Mobility in CME
4. Enter the ACTUAL extension, Lastname, Firstname, UserID and password. Do NOT
configure any more options for the IP phones, such as intercom, paging, etc. Since these
configurations will be removed when you enable extension mobility in the next step.
5. Click apply. During this step the user extensions, voicemailboxes and dummy ephones
will be created
All the user extensions and voicemail boxes must be configured before attempting these
steps.
enable
configure terminal
voice logout-profile tag (You may have as many logout profiles as phones supported by
the hardware)
username username password password (this is creted for this device when logg
number number type type
speed-dial speed-tag number [label label] [blf]
pin pin (optional used for call blocking)
end
Postings may contain unverified user-created content and change frequently. The content is provided as-is and
is not warrantied by Cisco.
2
Configuring Extension Mobility in CME
Also, remove the dummy ephone(s) created during the initial CCA step. These are the
ephones with MAC address AAAA.BBBB.CCCx. You only need the ephone-dn and CUE
voicemailbox(s) created by CCA in the first step. Note that IP phones with extension mobility
enabled will no longer be managable using CCA.
Basically, all you need to do is assign the logout profile to the ephone itself .
Using the logout-profile profile-tag where the profile tag is the tag number assigned to the
logout profile you previously created
These MAC address entered here is for your "REAL" IP phones. Typically IP phones on
UC500 will auto-register with an extension. You should remove this button assignment once
IP phone is enabled for extension mobility:
ephone 2
no button 1:x
This is all the configuration that a user will have when they login to a phone using extension
mobiltity. ephone-dn and ephone templates may be used.
Postings may contain unverified user-created content and change frequently. The content is provided as-is and
is not warrantied by Cisco.
3
Configuring Extension Mobility in CME
enable
configure terminal
voice user-profile profile-tag
name username password password
number number type type
speed-dial speed-tag number[label label] [blf]
Note: The extension mobility user ID configured in this step is separate and NOT
synchornized with your voicemail userID
Make sure to save both your UC500 IOS and CUE configuration when done.
Postings may contain unverified user-created content and change frequently. The content is provided as-is and
is not warrantied by Cisco.
4