Documente Academic
Documente Profesional
Documente Cultură
1. International Standard
No. Title
Standard Specification for Plastics Piping Systems For Hot and Cold Water
IS0: 15874 -2- 3
Installations - Polypropylene (PP) Part 2: pipes, part 3- Fittings.
All plastics and non-plastics materials for components of the PP piping system, when in permanent or
temporary contact with water which is intended for human consumption, shall not adversely affect the quality
of the drinking water.
3. Marking Requirements
Marking elements shall be printed or formed directly on the pipes and fitting in such a way that
after storage, handling, and installation, legibility is maintained.
Pipes: Fittings:
Number of this standard. Number of this standard.
Manufacturer’s name and/or trade mark. Manufacturer's name and/or trade mark (1).
Nominal outside diameter and nominal wall thickness. Nominal diameter.
Nominal wall thickness (es) of the corresponding.
Pipe dimension class.
Pipe (s) (for compression or crimped fittings only).
Material. Material identification (for fusion fittings only) 1).
Application class combined with operating pressure. Application class combined with design pressure.
Opacity. Opacity.
Manufacturer’s information. Manufacturer's information.
Country of origin, Full name of country of origin should Country of origin, Full name of country of origin should
be declared in the labelling. For countries which names be declared in the labelling. For countries which names
are composite “more than two words” should be are composite “more than two words” should be
declared in the labelling according the International declared in the labelling according the International
Standard No. (ISO 3166). Standard No. (ISO 3166).
4. Test Report
Test Reports from approved laboratories are accepted for the conformity assessment as following:
Laboratories accredited from approved party and full member in ILAC for products and group of related
products.
Authorities that issue conformity certificates for products and group of related products and which
approved from ILAC.
Laboratories of the appointed companies.
Manufacturer laboratories provided that all the following are fulfilled:
Laboratory issued detailed and full Test reports according to the approved standard,
Pre-Import Inspection, Testing & Certification Program of Goods into
the Republic of Iraq (ICIGI) / Kurdistan region