Documente Academic
Documente Profesional
Documente Cultură
ROTOLENE
The resin that has it all
www.rotopolymers.com
ROTOLENE
1. Product Description.
2. Applications: For Rotational molding of Intermediate Bulk Containers (IBCs), toys, general
purpose custom molding, water tanks, marine parts, indoor consumer articles.
3. Typical Characteristics:
+ , * &+ ) ┴4 ) 3 "
TEST * " 2%, ! ┴ 1" ! ┴, +
ź" G@EBLAŻ ź1&Ż
MELT INDEX
ASTM D1238 5.0 g/10 min 5.0 g/10 min
@190ºC/2.16 kg
ASTM D1505
Reference
DENSITY 0.935g/cm 3 0.935 g/cm3
MA-01
Internal Method
1
TENSILE STRENGTH AT YIELD
ASTM D638 2,55 3 psi 17.6 MPa
@2 in/min (50 mm/min) specimen bar Type I
1
FLEXURAL MODULUS
ASTM D790B 85,572 psi 590 MPa
@-1% Secant
2
LOW TEMPERATURE IMPACT TEST
ARM 53 ft/lb 72 J
@-40°F (-40°C), 0.125 in (3.18 mm) specimen
ESCR 1
> 185 hr > 185 hr
@ 122 °F (50°C), 10 % Igepal, F50 ASTM D1693
> 1,000 hr > 1,000 hr
@ 122 °F (50°C), 100 % Igepal, F50
Notes:
1
Plaque molded and tested in accordance with ASTM D4976.
2
Rotational Molded.
*Regulatory statements apply only to the natural resin. It is the responsibility of the article producer or food packager to determine
that the article is suitable and compliance for its intended use. Any pigment or additive addition, either dry-blending or
compounding, may void any base resin compliance.
The technical information of uses and applications recommended are based on the typical test results of each product. Polímeros
Mexicanos is not responsible for the use or the results based on this information. All users must run their own test to determine their
suitability.