Documente Academic
Documente Profesional
Documente Cultură
(IS : 12818-2010)
Code No. : Quantity received :
Size : Started on :
Designation : Completed on :
Sl.No Clause Tests Test Unit Specified Result
Method Requirements. obtained
1 5 COLOUR --- The pipe shall be of regular
blue colour, throughout. Slight
colour deviation is Permissible
2 7 DIMENSIONS IS:12818-
2010
2.1 7.1 Screen pipes with Ribs
2.1.1 7.1.1 / Mean Outer Diameter mm Min.
7.1.2 of Pipe (d)
2.1.2 Mean Outer Diameter mm Max.
over connection (ds)
2.1.3 Outer Diameter of mm Min.
pipe at any point
2.1.4 Wall thickness (S) mm Min.
under ribs. Max.
2.2 7.2 Casing Pipes IS:12818-
2010
2.2.1 7.2.1 / Mean Outer Diameter mm Min.
7.2.2 of Pipe (d) Max.
2.2.2 Mean Outer Diameter mm Max.
over connection (ds)
2.2.3 Outer Diameter of mm Min.
pipe at any point Max.
2.2.4 Wall thickness mm Min.
Max.
2.3 7.3 Ribs IS:12818-
2010
2.3.1 7.3.1 No.of ribs Per cm Min. Two and half
2.3.2 7.3.2 Height of the Ribs mm Min. Shall be 2
Visual Appearance --- The ribs should not have
any sharp edges.
2.4 7.4 Length of Pipes IS:12818-
2010
2.4.1 7.4.1 Effective length (l2) mm Min.
Effective Thread mm Spigot
Length (l3)
Socket
Segmental length mm
(l4)
(l5)
2.5 7.5 Slots IS:12818-
2010
7.5.1 No.of slots on the --- Min.
circumference of cross
sections
of slot length over mm
the internal circumference
of the cross section
Laboratory Incharge
Laboratory Incharge
Remarks:-
Laboratory Incharge
OBSERVATION SHEET
Size : Started on :
Designation : Completed on :
E C
D
Sl. Clause Tests Specified requirement Results
No. obtained
1 8.4 RUBBER SEALING
ELEMENT
Hardness (Shore-A) 65 ± 5
8.4.1 Dimensions (mm)
A 10 ± 0.5
B 3.5 ± 0.5
C 1.5 ± 0.5
D 2.2 ± 0.5
E 2.5 ± 0.5
Laboratory Incharge
OBSERVATION SHEET
(IS : 12818-10 )
Size : Started on :
Designation : Completed on :
Width (b) mm
Laboratory Incharge
OBSERVATION SHEET
(IS : 12818-10 )
Size : Started on :
Designation : Completed on :
Trapezodial Thread Dimensions as per Table no. 11 read with fig. 3A.
Laboratory Incharge
OBSERVATION SHEET
(IS: 12818-10)
Size : Started on :
Designation : Completed on :
Trapezoidal Thread Dimensions as per Table no. 11 read with fig. 3A.
d3 108.5 107.70
D2 112.0 110.60
D4 113.5 112.48
Min. 114.40
D5+0.3-0 115.5+0.3-0
Max. 114.58
Z 1.25 1.75
Remarks:
Laboratory Incharge