Documente Academic
Documente Profesional
Documente Cultură
The
beam is reinforced with 4-20mm diameter main reinforcing steel bars. It is then reinforced with 2-
leg stirrups, 10mm diameter. The beam is prestressed with 208-D1 tendon profile, grade 270. If
f’’c=35MPa and fyt=400MPa. Determine the spacing of stirrups in a “d” distance span using the
maximum ultimate shearing force acting on the beam. The beam is simply supported with a total
factored uniform load of 100kN/m. The beam has total length of 10m. Use detailed calculation.
Assume the beam is inside the building and that dp=480mm express your answer in multiples of
5mm.