Documente Academic
Documente Profesional
Documente Cultură
, ,
User s Manual User s Manual
MODEL A1SD61-USERS-E
MODEL 13J674
CODE
IB(NA)-66337-B(0411)MEE
When exported from Japan, this manual does not require application to the
Ministry of Economy, Trade and Industry for service transaction permission.
CAUTION
• Make sure that no foreign matter such as chips or wiring offcuts gets inside the
module. It will cause fire, failure or malfunction.
DANGER
• Do not install/remove the terminal block more than 50 times after the first use
of the product. (IEC 61131-2 compliant)
• Be sure to shut off all phases of the external power supply before cleaning or
retightening the terminal screws.
Carrying out this work while the power is ON will cause failure or malfunction
of the module.
CAUTION
• Be sure to shut off all phases of the external power supply used by the system
before mounting or removing the module.
Mounting or removing it with the power ON can cause failure or malfunction of
the module.
• Before handling the module, always touch grounded metal, etc. to discharge
static electricity from the human body.
Failure to do so can cause the module to fail or malfunction.
[Cautions on Disposal]
CAUTION
SAFETY PRECAUTIONS
Nov., 2004 IB (NA) 66337-C Partial correction
SAFETY PRECAUTIONS
This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent
licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial
property rights which may occur as a result of using the contents noted in this manual.
c 1991 MITSUBISHI ELECTRIC CORPORATION
MEMO
WARRANTY
Please confirm the following product warranty details before using this product.
3. Overseas service
Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at each FA
Center may differ.
6. Product application
(1) In using the Mitsubishi MELSEC programmable logic controller, the usage conditions shall be that the application will
not lead to a major accident even if any problem or fault should occur in the programmable logic controller device, and
that backup and fail-safe functions are systematically provided outside of the device for any problem or fault.
(2) The Mitsubishi programmable logic controller has been designed and manufactured for applications in general
industries, etc. Thus, applications in which the public could be affected such as in nuclear power plants and other
power plants operated by respective power companies, and applications in which a special quality assurance system
is required, such as for Railway companies or Public service purposes shall be excluded from the programmable logic
controller applications.
In addition, applications in which human life or property that could be greatly affected, such as in aircraft, medical
applications, incineration and fuel devices, manned transportation, equipment for recreation and amusement, and
safety devices, shall also be excluded from the programmable logic controller range of applications.
However, in certain cases, some applications may be possible, providing the user consults their local Mitsubishi
representative outlining the special requirements of the project, and providing that all parties concerned agree to the
special circumstances, solely at the users discretion.
High Speed Counter Module Type A1SD61 High Speed Counter Module Type A1SD61
, ,
User s Manual User s Manual
MODEL A1SD61-USERS-E
MODEL 13J674
CODE
IB(NA)-66337-D(0609)MEE
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI-KU, NAGOYA , JAPAN
When exported from Japan, this manual does not require application to the
Ministry of Economy, Trade and Industry for service transaction permission.