Documente Academic
Documente Profesional
Documente Cultură
EX
Mod. ULL-1/EV with packed column
INTRODUCTION
This unit includes two separate tanks for the solvent and for
the phase having to be refined, that are sent to the extraction
column by two metering pumps; the column is provided with
top and bottom phase separators and with two other tanks for
collecting the refined and extracted products.
This unit is available in two versions:
• mod. ULL/EV, with “rotating-disc” extraction column
• mod. ULL-1/EV, with “packed” extraction column
CHEMICAL ENGINEERING
TRAINING PROGRAM
This unit enables to deepen
the following issues:
• Determination of the number of transfer units
• Height of a transfer unit
• Extraction efficiency
• Mass balance
• Calculation of mass transfer coefficient
• Calculation of the number of theoretical stages
• Exercises on 3-component systems
(e.g.: acetic acid – toluene – water)
TECHNICAL SPECIFICATIONS:
Power supply: 230 Vac 50 Hz single-phase - 1 kVA
• Framework of AISI 304 stainless steel with castors
(Other voltage and frequency on request)
• Extraction column of borosilicate glass, DN50, h = 600 mm,
Dimensions: 1600 × 800 × 2400 mm (Mod. ULL/EV)
including disc agitator and motor with tachogenerator
1600 × 900 × 1800 mm (Mod. ULL-1/EV)
(for mod. ULL/EV, only)
Weight: 130 kg
• Electronic indicator of agitator speed (for mod. ULL/EV, only)
• Extraction column of borosilicate glass, DN50, h = 600 mm,
with Raschig rings (for mod. ULL1/EV, only) REQUIRED
• Top separator of borosilicate glass UTILITIES (PROVIDED BY THE CUSTOMER)
• Bottom separator of borosilicate glass • Fume suction system
• 2 metering pumps with body of AISI 316 stainless steel,
flow rate of 0 to 40 l/h ACCESSORIES (NOT INCLUDED)
• Feeding tank of plastic material for the light phase, • Analytical instruments for analyzing the composition of
with capacity of 30 l the extracted mixture (e.g.: a refractometer or titration
• Feeding tank of plastic material for the heavy phase, glassware)
with capacity of 30 l
• Tank of plastic material, with capacity of 30 l, for collecting SUPPLIED WITH
24B-E-EX-ULL-ULL1-1
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com EX 4