Documente Academic
Documente Profesional
Documente Cultură
Facility Common
1 Establishing Project Standards
2 Drawing a Steel Work
3 Draw support parts
4 Modifying a Steel Work
5 Drawing a Break Symbol
6 Floor Line
7 Finding Interferences
8 Arrange Section Elements
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
Estab
blishin
ng Projject Sttandards
Function
F O
Overview
Check
C and co
onfigure Establishing Projectt Standards fo
or part styles and
a creating drawings.
You
Y can also create namess and settings for each job o or each order.
1. Pulldown MMenu
Click [F
Facility Commo
on (C)] [Establishing Pro
oject Standards (M)].
2.
2 Icon Menu
Command D
Dialog Desc
cription
1.
1 Setting to usse Shows which setting is in use..
2.
2 Config name The set name fo
or the yellow-h
highlighted column displays s the set namee specified in the current “S
Settings
to use”.
u
A set
s name with blue text shoows the recom mmended setting when usedd with a black background and a the
reccommended seetting when ussed with a whiite background d.
A set
s name field with no highlig
ghting and in black text indicates a set naame created by
b copying.
3.
3 Copy button
n C
Create a duplicate.
To create a settting with the ssame contentt, click the Cop
T py button for tthe set name field to copy, or click
o Copy (C) in
on n the context mmenu that is displayed
d by rig
ght clicking onn the dialog bo
ox.
T copy is cre
The eated on the b bottom line as “Copy~XXXX X” (where XXX XX is the same e name as the copied
o
original).
C
Change the name and settin gs as necessa ary.
4.
4 Delete butto
on Click the Delete button for the
e set name fieeld to delete, or
o click on Del ete (D) in the context menu
u that is
d
displayed by right clicking o
on the dialog box.
b The set naame is deletedd.
S names with
Set h X in “1.”, and
d set names in
n blue text, cannot be deleteed.
5.
5 Rename button Set names can be changed b by clicking the
e Rename buttton for the sett name field to
o change, or cllicking
on Rename (M) in the contextt menu that is displayed by right
r clicking oon the dialog box.
b
Sett names with X in “1.”, and sset names in blue
b text, cann
not be deletedd.
6.
6 Modify butto
on Op
pen the Setting
gs for each Pa
art dialog and change the se
ettings for eacch part.
HVAC/Ele
ectrical/Plumbiing Common-2
2
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
7.
7 Close button
n Appplies the settin
ngs for the pro
ofile selected in the “In Use” column to eaach command and closes this
win
ndow.
Settings
S by Part dialog box
F
Facility Comm
mon-3
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
2.
2 Settings Wiindow
Showws style setting
gs for each paart and Establiishing Project Standards.
For th
he setting item
ms shown, sho ows style settings dialogs foor commands ffor drawing ea
ach part and
advannced configuraation dialogs ffor drawing. For details, refe
er to each com
mmand.
eal-time functions]
[Re
◆ [General]
A: Set Real-tiime
Set wheth her or not to u
use hidden line ence check, sizze annotation
e, fill, interfere n, and UP/DN symbol
in real tim
me.
HVAC/Ele
ectrical/Plumbiing Common-4
4
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
◆ [Fill]
A: Fill settings
s
Make setttings for real-ttime fill.
[1] Use fill on plan vie
ew only
If this is checked, fill is only use
ed on the plan view.
F
Facility Comm
mon-5
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
◆ [Interference
e check] - [Dra
aw settings]
HVAC/Ele
ectrical/Plumbiing Common-6
6
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
- [Electrical]
◆ [Draw Setttings]
F
Facility Comm
mon-7
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
- [Electrical] - [Equipment/de
evices]
◆ [Draw Setttings]
HVAC/Ele
ectrical/Plumbiing Common-8
8
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
[HVAC
[ and Plumbing] – [Ro oute/Fitting] – [Settings by ro oute function]
(Select [Setttings by route function] to display
d the folllowing [Setting
gs for each Ru
un] dialog.)
[Style/Materrial]
A:
A Settings sccreen switching
g If this is chhecked, the ssettings for styyles and materials for each function are switched
s to a tabular
d
display.
Refer to “B””~”P” for the ccontent of the settings.
s
F
Facility Comm
mon-9
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
Click on
o the Batch Setup
S button tto display the Batch Setup dialog box shhown below, which
w can be used
u to
reflect the batch setttings in the sp ecified functio
ons.
A1: Name
N of the fuunction to refle
ect settings in
Check
C the nam mes of function n which should reflect the ssettings.
A2: Change
C the seetting for the names
n of functtion to reflect ssettings in
Change
C the seetting status off A1.
Select
S all: Cheeck all items.
Deselect
D all: U
Uncheck all items.
Invert: Invert thhe checked se elections.
A3: Change/don't
C change settings
Reflect
R checke ed items in othher functions.
A4: Change
C settinggs for change e/don't change.
Change
C the seetting status off A3.
Select
S all: Cheeck all items.
Deselect
D Uncheck all items.
all: U
Invert: Invert thhe checked se elections.
B:
B Setting item
m selection S
Select the items to make setttings for. The display on the
e right side off the dialog bo
ox varies accorrding to
t items selected.
the
C:
C Select Systtem Name Select the name of the sysstem to configu ure.
Each folderr contains varrious system names such as “Other HV VAC Duct,” “O Other HVAC pipe"
p or
“Other --.”
Use the “Other --“ systemm name for pro ocessing parts s on drawings that you rece
eive that have system
name attribuutes set which
h are not proviided in this setting.
A list of sys
stem names iss displayed whenw selecting a system ussing command ds such as thee “Run”
command. (Note:
( “Other ---“ is not show
wn in the list)
D:
D Add functio
on Create a copy of the syste em selected inn “C.” “Other --“
- cannot be sselected as the copy source
e.
Click the button to show tthe following [S
Set additional function] dialoog.
HVAC/Elecctrical/Plumbin
ng Common-10
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
E:
E Delete Systtem “Delete the system selectted in “C.” “Otther --“ cannott be deleted.
F:
F Function na
ame Show the syystem name. Y You can chan nge the name of a system thhat has already been create
ed.
Refer to “D1
1” for precautio
ons to take wh
hen changing a system nam me.
G:
G Function Tyype Select the system type
e.
H:
H Route scree
en Layer Set the laye
er to use when n drawing partts of the selected system ussing each com
mmand.
Refer to [To
oolbar] – [Laye
ers] for how to set layers.
oolbar] - [Laye rs] for the laye
Refer to [To er setting meth
hod.
I: Diffuser draw
w layer(when only ducts)
yer to use whe
Set the lay en drawing etc c. parts for the
e selected funcctions with ea
ach command..
Set the layer to use whe en drawing diffusers for the selected fu nction with th he Equipment//Device
Layout com mmand or the R Replace Equip pment/Device command.
Refer to [Tooolbar] - [Laye rs] for the laye
er setting methhod.
J:
J Style Set 1-line with
w size, witho out 1-Line with hout size, 2-lines, and the filll color to use with 2-lines, fo
or each
function.
The fill settin
ng is used if F
Fill Setting in “G
General” in the Real-time F unction folderr is checked
(there is thee same setting g in “Real-time e Settings” in the
t context meenu).
The followin ng Fill Color aand Pattern Color
C dialog bo ox is displayeed when the FillF Settings bu utton is
clicked.
J1: No Color
Ch
heck this box to disable paaint operation. Uncheck thiss box to perfo
orm paint proccessing
according to the
e settings H2~H4.
ckground colorr
J4: Bac
F
Facility Commo
on-11
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
K:
K Materials, In
nsulation, Area Type/Location Set tthe material, insulation or area type/locattion for each system.
s
L:Route
L symbo
ol Set route syymbol for eac h system.
Click the bu
utton to show w the followingg [Route symb bol selection] dialog. Confirrm the Route symbol
by either se
electing the deesired label in L1, then click
king the [As Seelected] butto
on, or by inputtting the
desired textt in L2 and the
en clicking the
e [Input symbol] button.
M:
M Size Annotation Check thee box to use tthe Route sym
mbol specifiedd by “J” for thee “System” be
eing drawn ussing the
[Size Ann
notation] comm
mand. Unchec ck to use the specified text.
N:
N Cross section display sym
mbol
abel type and
Set the la abel for each system select
d displayed la cted by the [C
Cross section display
symbol] command.
c
O:
O Low Pressu
ure Duct/High Pressure Ducct
Specify lo
ow pressure o or high pressure duct for each system forr use with the [Estimate] command
to calculate duct thickne
ess.
P:
P Reflect to o
other function Click the button to show
w the following [Reflect to other
o function]] dialog and specify which ittems to
apply to other
o systems..
P1: Items
s to reflect
Ch
heck the boxess for items to apply
a to other systems.
P2: Funcction name
Ch
heck the boxess to specify the system nammes to apply thhe settings.
HVAC/Elecctrical/Plumbin
ng Common-12
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
-[Fitting] – [1
1-line duct fitting] – [HVAC duct
d fitting (de
ependent of function)], [Utilitty duct fitting ((dependent of function)]
A: Select Setting
Selecct the item to
o configure. The
T nce of the right-hand side of the dialogg box change
appearan es depending on the
seleccted item.
B: Fitting Shape
Selecct the fitting type for each sy
ystem.
This ssetting is used d for commandds such as [D
Drawing System
ms] and [Edit a System].
C: Batch ssetup
Set th
he fitting shap
pe for all systems all at once
e.
F
Facility Commo
on-13
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
A: Select Setting
Selecct the item to
o configure. The
T appearan es depending on the
nce of the right-hand side of the dialogg box change
seleccted item.
B: Fitting shape
Selecct the fitting type for each fu
unction.
This ssetting is used d with commands related to
o route creation and route ed
diting.
C: Batch settings
Batch
h set the fitting
g shapes for all
a functions.
HVAC/Elecctrical/Plumbin
ng Common-14
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
-[Fitting]
- – [1-L
Line Pipe fittings] – [HVAC Pipe fitting (de
ependent of fu
unction) ~ [Utility pipe fittinggs (dependent of function)]
A: Select Setting
Selecct the item to
o configure. The
T appearan es depending on the
nce of the right-hand side of the dialogg box change
seleccted item.
B: Fitting Shape
Selecct the fitting type for each sy
ystem.
This ssetting is used d for commandds such as [D
Drawing System
ms] and [Edit Route].
C: Batch ssetup
Set th
he fitting shap
pe for all systems all at once
e.
F
Facility Commo
on-15
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[Fitting] – [1
1-Line Pipe fitttings] – [Pipe fittings (indep
pendent of fun
nction)]
A: Select Setting
Selecct the item to
o configure. The
T nce of the right-hand side of the dialogg box change
appearan es depending on the
seleccted item.
B: Fitting Shape
Selecct the fitting type for each 1--line fitting.
This ssetting is used d for the [Routte Draw], [Sele
ect 2-lines/1-L
Line] commands.
HVAC/Elecctrical/Plumbin
ng Common-16
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
A:
A Select settin
ng
Select the ite
em to configuure. The app he right-hand side of the dialog box changes
pearance of th
depending onn the selected item.
B:
B Select Syste
em Name
Select the name of the sysstem to configu
ure.
D:
D Group piping parts
Separate pipiing materials iinto groups.
E:
E No config
Shows a list of
o piping mate
erials not sorte
ed into groups under “D”.
F:Materials
F in g
group folder>>
>No config
Click this buttton to move th
he piping mate d in "D" to unseelected piping
erials selected g materials in "E".
"
G:
G Selection grroup folder <<
<Unset pipes
Click the button to move th
he piping mate
erials selected in “D” to the ggroup folder se
elected in “C”..
H:
H Create grou
up folder
Click the button to create a group folder in “D”.
J: Del group fo
older
Click the button to delete g
group folder se
elected in “D”.
Piping materials from a delleted group foolder are moveed back to thee unselected piping
p materials in “E”.
F
Facility Commo on-17
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
K:
K Toggle Displlay of Fitting Details
D
D”, advanced settings for eeach fitting type as configu
For group folder settings sselected in “D ured for
each size ran
nge selected fo
or this item are
e shown in are
ea “M”.
L:
L Size Range
Select the siz
ze range and ffitting type to use
u for the gro
oup folder settting selected in “D”.
M:
M Fitting Deta
ails
Configure adv
vance settingss for the fitting
g type selected
d in “K”.
N:
N Reflect to otther function
Applies the seettings of the ssystem selectted in “B” to otther systems.
Click the buttton to show the following g “Apply to Other
O Systemss” dialog, then apply the settings
s
selected in “B
B” to systems cchecked in “NN1”.
ng Common-18
HVAC/Elecctrical/Plumbin
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
-[Thickness
- off thermal insulation material]
A: Select Setting
Select the ite
em to configuure. The app
pearance of th
he right-hand side of the dialog box changes
depending onn the selected item.
F
Facility Commo
on-19
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[Display
- settin
ngs of function
n name] – [HV
VAC duct] ~ [U
Utility Piping]
A: Select Setting
Select the ite
em to configuure. The app he right-hand side of the dialog box changes
pearance of th
depending onn the selected item.
Hide
B: Show/H
Set whether to t show or hid
de in the list of s such as the [Route
o systems to be configuredd in commands
Draw] comma and. (-: Show,, ×: Hide)
* “Others --” is never showeed regardless of the setting.
ng
C: Orderin
ay order in the
Set the displa e list of systems to be conffigured in com
mmands such as the [Route
e Draw]
command.
D: Batch ssetup
Click the button to change the all of the items
i in “B” to all - or all ×.
HVAC/Elecctrical/Plumbin
ng Common-2
20
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
A: S
Setting item se election
Select th he items to make settings ffor. The displaay on the right side of the ddialog box varies according
g to the
items selected.
B: C
Connection che eck against different functio
ons.
If this is checked, the following con nfirmation mes
ssage is displayed when a connection is s made to a different
d
function using a route draw-type com mmand or a fitting placement command.
F
Facility Commo
on-21
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[HVAC and
d Plumbing] – [Route/Fitting]] – [1-line ductt fitting style], [1-line pipe fittting style]
A: Select Setting
Selecct the item to
o configure. The
T appearan es depending on the
nce of the right-hand side of the dialogg box change
seleccted item.
B: tick styyle
Set thhe style for the
e tick part for 1-line fittings a
and 1-line pipe
e fittings.
D: Valve T
Text Style
Set th
he color of the
e text included e shapes.
d in 1-line valve
HVAC/Elecctrical/Plumbin
ng Common-2
22
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
-[HVAC and
d Plumbing] – [Route/Fitting]] – [1-line fittin
ng factor]
A: Select Setting
Selecct the item to
o configure. The
T appearan
nce of the right-hand side of the dialogg box change
es depending on the
seleccted item.
F
Facility Commo
on-23
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
etting
A: Select se Select the item to co nfigure. The appearance
a of the right-hannd side of the
e dialog box changes
dependiing on the sele
ected item.
B: Duct with
h/without Set whether or no
ot to draw cen
nter lines for 2--lines ducts when drawing rroutes and rise
ers.
D: Duct style
e Set the styyle of the cente
er line for 2-lin
nes ducts.
E: Draw/don
n’t draw for pip
pes and valve
es For 2-line pipes, set wh
hether or not to
o draw the cennter line of the
e valve.
(intege
er in the range
e 0~9999)
-[HVAC and
d Plumbing] – [Route/Fitting]] – [Hatch]
A:
A Select settin
ng
Select the item to config gure. The appearance of the
t right-handd side of the dialog box changes
depending ono the selecte ed item.
B:
B Style Set the hatc
ch style.
C:
C Angle Set the hatc
ch angle.
D:
D Pitch for eacch scale Set the hatc
ch pitch for eacch drawing sc
cale.
F
Facility Commo
on-25
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[HVAC and
d Plumbing] – [Route/Fitting]] – [Duct Flang
ge]
A: Select se
etting Select the ite
S em to configu
ure. The appe he right-hand side of the dialog box changes
earance of th
d
depending on the selected iitem.
HVAC/Elecctrical/Plumbin
ng Common-2
26
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
A: Select se
etting Select the ite
S em to configu
ure. The appe he right-hand side of the dialog box changes
earance of th
d
depending on the selected iitem.
C: Size Rou
und off Setting
g for W/H Othe
er than Estimaates
Check herre to perform rround off whe
en setting angle duct size in commands su
uch as [Route
e Draw].
D: Round du
uct size round
d off Set the
e round off p itch for each duct size range for φ forr round ductss. (Round off will be
perform
med regardlesss of the settiing in “C” when the estimaate feature off the Changin
ng Size
comma and is used)
F
Facility Commo
on-27
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
[H
HVAC/sanitaryy] - [Route fittiings] - [Display
y/hide dampe rs]
HVAC/Elecctrical/Plumbin
ng Common-2
28
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
-[HVAC and
d Plumbing] – [Route/Fitting]] – [2-lines fire
eproof dual pip
pe]
A: Select se
etting Selectt the item to cconfigure. The appearance of
o the right-haand side of the
e dialog box changes
depen
nding on the se elected item.
B: Inside Lin
ne Drawing Se
etting When checked, dra
aw the inside line when draw
wing 2-lines fire
reproof double
e wall pipes.
C: Inside Lin
ne Style Set the inside line sstyle for 2-lines
s fireproof dou
uble wall pipess.
F
Facility Commo
on-29
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[HVAC and
d Plumbing] – [Material Settiings] – [Settin
ngs for each re
ectangular duc
ct material] ~ [Settings for pipe
p material]
A: Select se
etting Select the item
S m to configure
e. The appearance of the appearance
a oof the right-han
nd side of the
e dialog
b changes depending
box d on the selected item.
i
aterial abbrevia
B: Show ma ations Check to show an
n abbreviated name display of materials.
C: Additiona
al symbol Set additional m arkings for each
e material for use withh commands such as the
e [Size
Anno
otation] comm
mand.
D: Flange se
ettings Set which
w flange tto use when drawing fittings
s or valves thaat include flang
ges.
HVAC/Elecctrical/Plumbin
ng Common-3
30
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
A: Select se
etting Select
S the item
m to configure
e. The appearance of the right-hand sid
de of the diallog box
changes depen nding on the selected
s item.
ne(batch) Settting
B: Hidden lin
Set
S whether to o use hidden order
o and proc
cessing methood for when us sing the
[Hidden](batchh) command or o for real time hidden.
Use
U the arrow w buttons to ch hange the ordder. Tick the ccheck box nex xt to each me
ethod to
select
s for use as a method forf hidden. Th he vertical/horrizontal order can
c be configu ured by
the order of ve
ertical, horizon
ntal, diagonal.
D: System o
order Set
S the system
m order for whe
en performing hidden by sysstem.
F: Collective
e Change System Order
Move
M the orderr of the system
m group being configured too the highest position
p by
selecting the ssystem group ([HVAC ductt], [Utility ductct], [HVAC pip pe] etc.) and clicking
he confirm buttton.
th
F
Facility Commo
on-31
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
-[HVAC and
d Plumbing] – [Duct thicknes
ss]
A: Select se
etting Se
elect the item to configure. The appearrance of the rright-hand sid
de of the dialog box
changes depend ding on the se
elected item.
C: Select Ma
aterial Se
elect the materrial. Set the th ach parameterr in “D” for eac
hickness for ea ch selected material.
HVAC/Elecctrical/Plumbin
ng Common-3
32
Fac
cility Comm
mon / Estabblishing Prroject Stand
dards
Precaution
ns
1. Folder Hierrarchy Duplicated Establishing P Project Standa ards are createed in “CADEWWA Real English Edition Verrsion 2”
folders as in
ndicated below w.
The settingss from the fold
der specified in
n [Settings to Use] are appliied to each co
ommand.
2.
2 Publishing Establishing Project
P Standaards
It is possible to transfer ““Save Environnment” and “R Restore Enviroonment” CAD environment settings
s
for using Esstablishing Pro oject Standard
ds with a differrent PC.
Refer to thee CAD environ nment configuration commands for detailss.
3.
3 Changing “S
Settings to Usse” Settings
S curren
ntly in use are discarded wh
hen “Settings tto Use” is changed.
Save a cop py of the curre
ent settings beefore changing
g “Settings to Use” if you wish
w to save th
hem for
later use.
F
Facility Commo
on-33
Fa
acility Com
mmon / Esta
ablishing Project
P Sta ndards
Usage Exa
ample
1. Set column
n style using the recomme
ended setting
gs (black bac
ckground)
HVAC/Elecctrical/Plumbin
ng Common-3
34
Facility Common / Establishing Project Standards
Facility Common-35
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
Drawin
D ng a Steel
S Work
W
Function
F O
Overview
Draw steel pa
arts, steel plate
es, and full-thrread bolts.
How
H to Lau
unch the Command
1. Pulldown MMenu
Click [F
Facility Commo
on (C)] [Dra
awing a Steel Work [S].
2.
2 Icon menu
Co
ommand To
oolbar Des
scription
1. Command S
Selection Select comm
mands related
d to Facility Co
ommon.
2.
2 Draw typesselection
Select parts to
t draw.
[1] Steel parts
s
Draw steel parts such as equal leg ang
gle steel and H-sections.
H
[3] Full-thread
d bolts
Draw full-thread bolts.
3.
3 Draw metho
od selection
peration metho
Select the op od to use when the draw typ pe is “steel plaate” or “full-thrread bolt”, from
m [draw
on one elevattion, draw on ttwo elevations
s].
[1] Draw at on
ne elevation
Draw steel parts with thhe same kind of operation as the electrrical Cable Trray cable trayy or the
HVAC/sanittary Draw Rou ute command..
When draw wing on plan, d
draw by specifying two pointts and the elevvation (or just the elevation)).
When draw wing on section
n, draw by spe ecifying two po
oints and deptth on plan.
4 Set elevation
Set the elevations on the sstart side and the
t end side.
The specifica ation check bo ox is only used
d if the section window is oopen. If it is no
ot, the setting for the
elevation speecification field
d is adopted.
(1) If checked:
Indicate drawing
d level o
on section view
w.
(2) If not chec
cked:
Draw on the
t specified le evel.
Fa
acility Commo
on -36
Facility Common / Drawing a Steel Work
[2] Inclined
Draw the steel plate inclined on a section.
8. Direction of slope
Select the direction of slope to use when “7. Section shape selection” is “Inclined”.
9 Detail Settings
Set the details of the part to draw.
1. Dimension A
Specify the embedded le ength of the full-thread bolt.
ng is not adop
* This settin pted when “Fu ull-thread bolt” is set to “Drraw on one elevation” or “D
Draw on
two elevatio
ons” and the eelevations on the
t start side anda end side aare the same.
2.
2 Dimension B
Specify the jut length from
m the steel pa
art.
Fa
acility Commo
on -38
Facility Commoon / Drawin
ng a Steel Work
[Full-thread b
bolt] - [Electriccal]
1.
1 Dimension A
Specify the embedded leng gth when draw
wing a full-thre
ead bolt for a cable tray, rac
ceway, CG wiiring, or
electrical equ
uipment/device
e.
2.
2 Dimension B
Specify the extra
e length wwhen drawing
g a full-thread bolt for a caable tray, raceway, CG wiring, or
electrical equ
uipment/device
e.
Fa
acility Commo
on -39
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
[Full-thread
[ bo
olt] - [HVAC/SA
AN]
1.
1 Hanging me
ethod
Select the hanging method
d for rectangular ducts.
2.
2 Dimension A
Specify the embedded
e len
ngth when dra
awing a full-th
hread bolt forr a rectangula
ar duct, circula
ar duct,
pipe, diffuser box, or HVACC/SAN equipm
ment/device.
3.
3 Dimension B
Specify the extra
e when drawing a full-thread bolt for a recctangular ductt, circular ducct, pipe,
length w
diffuser box, or
o HVAC/SAN N equipment/device.
Fa
acility Commo
on -40
Facility Commoon / Drawin
ng a Steel Work
[Steel
[ part] - [C
Common]
1.
1 Dimension A
ngth from full--thread bolt to end of steel part.
Specify jut len p
Fa
acility Commo
on -41
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
Steel part] - [H
[S HVAC/SAN]
1.
1 Set the size
e of equal leg angle
a steel forr each size
Set the size of
o equal leg an
ngle steel for each
e long-side
e size of rectaangular duct.
2.
2 Initialize buttton
Restore the in
nstalled settin gs.
Fa
acility Commo
on -42
Facility Commoon / Drawin
ng a Steel Work
[Metal
[ supportt part shape dimensions] - [Setting 1] ~ [S
Setting 4]
Specify the dimensions of e each support part drawn witth the Draw S
Support Parts command.
c
Refer to the Draw
D Support Parts comma and for the setttings.
Fa
acility Commo
on -43
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
Fa
acility Commo
on -44
Facility Commoon / Drawin
ng a Steel Work
[R
Refrigerant pip
pe hanger ban
nd]
Set the meta al support pa
art size to use
e with the Drraw Support Parts comma
and for each size of
refrigerant pip
pe.
Refer to the Draw
D Support Parts comma and for the setttings.
Fa
acility Commo
on -45
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
[L
Layer(Steel)]
1.
1 Layer settings
Hanger rod (E
Electric):
Set the layer to draw
w electric equipment use hanger rod in Drrawing a Steel Work.
HVAC/SAN):
Hanger rod (H
Set the layer to draw
w HVAC/SAN equipment use hanger rod in Drawing a Steel
S Work.
Steel parts:
Set the layer to draw
w Steel parts in Drawing a Steel
S Work.
Steel plate:
Set the layer to draw
w Steel plate in
n Drawing a Steel
S Work.
Fa
acility Commo
on -46
Facility Commoon / Drawin
ng a Steel Work
[L
Layer(Supportt Parts)]
1 Layer settings
1.
Insert (Electrric):
Set the layer to draw
w electric equipment use Ins
sert in Drawinng Support Pa
arts.
Insert (HVACC/SAN):
Set the layer to draw
w HVAC/SAN equipment use Insert in Drrawing Support Parts.
Hanger rod (E
Electric):
Set the layer to draw
w electric equipment use hanger rod in Drrawing Support Parts.
Hanger rod (H
HVAC/SAN):
Set the layer to draw
w HVAC/SAN equipment use hanger rod in Drawing Su
upport Parts.
s (Electric):
Support parts
Set the layer to draw w electric equipment use Su
upport parts inn Drawing Sup
pport Parts.
Support parts
s (HVAC/SAN ):
Set the layer to draw
w HVAC/SAN equipment use Support parrts in Drawing Support Partss.
Steel parts:
Set the layer to draw
w Steel parts in Drawing Support Parts.
Fa
acility Commo
on -47
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
Input layer:
Draw the parts in Inpu
ut layer
er:
Specified laye
Draw the parts in Spe
ecified layer
Same layer as
a specified paarts:
Draw the parts in layeer same as tarrget parts (Route,Insert).
When thhere is not insttructions parts
s, draw it in an
n Input layer.
Reference Boouton
Set the layer to draw in Specified la
ayer.
Establis
sh a setting dia
alogue of the layer
l information.
[O
Other]
1.
1 Material setttings
Set the materrial for each pa
art.
Fa
acility Commo
on -48
Facility Commoon / Drawin
ng a Steel Work
Description
D n of the Ste
eel Part Settings dialo
og box
▲TOP
Fa
acility Commo
on -49
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
2 Part type se
election
Select the pa art type, from [[equal leg ang
gle steel, light-weight angle steel, channe el steel, light channel
c
steel, I-sectio
on, H-section, rectangular steel
s tube (squuare), rectanggular steel tube (oblong), fla at steel,
duct channel,, circular steell part].
3. Select size
e
Select sizes for
f selected pa
arts.
Description
D n of the Ad
djustment dialog
d box
ngle Correction
1. Perform An n Select whether to perform m angle correc
ction.
(1) If checked:
Perfform correctio
on according to
o the settings of [2. Correctiion Type] and [3. Specified Angle].
A sppecified angle of 45 degree is shown grap phically.
(2) If no
ot checked:
Do not
n perform anngle correction
n.
2.
2 Correction T
Type Select the correction
c methhod [specifiedd angle, heightt, vertical].
1. Speccified
Correct accordingg to the angle specified in [3
3. Specified Anngle].
2. Horizontal
Perfforms horizonttal correction for the drawing.
3. Verttical
Perfforms vertical correction forr the drawing.
3.
3 Specified A
Angle [Se
elect from [155 degree, 30 degree, 45 degree] for the angle to be used in [2. Correction
n Type:
Specified An
ngle].
Fa
acility Commo
on -50
Facility Commoon / Drawin
ng a Steel Work
Description
D n of the Ste
eel Plate Se
ettings dia
alog box
▲TOP
2. Thickness
Specify the th
hickness of the
e part.
3. Thickness measuremen
nt
Refer to the thickness valu e.
Description
D n of the Full-Thread Bolt
B Setting
gs dialog box
b
▲TOP
2. Standard e
elevation
Specify the fo
ollowing eleva ation position when “Draw on
o one elevatiion” and “3. fu
ull-thread bolt length”
are both set to
t “Specify (fixxed vertical)”.
Fa
acility Commo
on -51
Facility Common / Drawing a Steel Work
5. Equipment type
Select the full-thread bolt and insert equipment type, from [Electrical, HVAC/SAN].
Full-thread bolts and inserts drawn as [Electrical] are not counted by the HVAC/SAN Materials - Material
Count command, while those drawn as [HVAC/sanitary] are not counted by the Electrical - Material Count
command.
Also, note that there is no function for changing equipment for drawn full-thread bolts and inserts.
Precaution
P ns
2.
2 Show Rubb
ber The thickne ar as a single line depending on overall ssize. This is tru
ess may appea ue even for CG
G.
3.
3 Show Blade
e It may not be possible to
o draw teeth//blade dashed
d lines may inn some cases
s for certain angle
a or
level conditions.
After drawing, modify e elements as required by either usingg the Object Style command or
Lengthen/TTrim command ds.
4 Steel plate CG
4.
Steel plate CG
C drawn witth “Inside spe
ecification” an
nd circle or eellipse selecte
ed is displaye
ed as a
rectangle.
Fa
acility Commo
on -53
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
Usage
U Example
1. Draw an eq
qual angle ba
ar (25x25x3) using
u single d
drawing
Fa
acility Commo
on -54
Facility Commoon / Drawin
ng a Steel Work
2.
2 Example o
of drawing channel steel (1
100 x 50 x 5 x 7.5) continu
uously, with le
evel specificaation
(3) pecify
“Sp Co
ontinuous Drawing
Loc
cation”
(3) Sp
pecify the connnection point.
Sp
pecify points (4
4) to (6).
(4) nd Specificatiion”
“En
(4) Seelect End Spe ecification.
Click the right mouse
m button aand select En
nd Specificatio
on
(7)) from the contextual menu..
Fa
acility Commo
on -55
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
3.
3 Draw an H--bar(100x50x5x7) on tw
wo levels
4.
4 Operation
n example of drawing stee
el plate with a frame
(2) Spe
ecify draw ran
nge
(2) Speecify the draw
w start positio on for the ste eel plate.
Clic
ck on the draw
w start point [1]] of the steel plate.
p
(3) Spe
ecify the draww end positio n for the stee el plate.
Rub
bber display from the draw sstart point [1] to
t the cursor position.
p
Spe
ecify the draw end point [2].
Fa
acility Commo
on -56
Facility Commoon / Drawin
ng a Steel Work
(3) Dra
aw
(4
4) Draw the steel plate.
5.
5 Operation
n example of drawing stee
el plate with iinside specifiication
(2) aw
Dra
(2
2) Draw the steel plate.
Fa
acility Commo
on -57
Fa
acility Com
mmon / Dra
awing a Ste
eel Work
6.
6 Operation
n example off drawing stee
el plate with a dot sequen
nce
(3) aw
Dra
(3
3) Draw the steel plate.
Fa
acility Commo
on -58
Facility Commoon / Drawin
ng a Steel Work
7.
7 Operation e
example of dra
awing a full-thrread bolt singlly
(2) End
d point speciffication
(2) Sppecify the endd point.
Sppecify the end point [2] and ddraw the full-tthread bolt.
If section
s was specified for (1 ), go on to sp
pecify the deptth
onn plan.
Fa
acility Commo
on -59
Facility
F Com
mmon / Drrawing a Stteel Work
Draw
w Sup
pport Parts
P
Fu
unction Ove
erview
▲TOP
Ho
ow to Laun
nch the Com
mmand
▲TOP
1.Pulldown mmenu
Click on
n [Common eq
quipment (C)] - [Draw suppo
ort parts (S)].
u
2.Icon menu
Comman
nd toolbar description
d n
▲TOP
1. Command
d selection
Commands re
elated to com mon equipme
ent can be sele
ected.
2. Select sub
bject parts
Select subjec
ct parts.
1 Insert
Draw suppo ort parts on drrawn inserts.
2 Route
Draw supp port parts on rectangular ducts, circula ar ducts, pipees, cable tra
ays, CG wirin
ng, and
raceways.
3 Arbitrary
Draw comb binations of steeel parts, full-tthread bolts, and
a inserts.
4. Set elevatiion
dard elevation of steel parts that are place
Set the stand ed in combinattion.
The specify check
c box is o nly settable if the Section window
w is openn.
5. Details
Set the details of the part to
o draw.
F acility Commo
on -60
Facility Comm
mon / Draw
w Support Parts
1.
1 Set U bolts
Set the size of
o equal leg an
ngle steel for each
e long-side
e size of rectaangular duct.
2.
2 Set U bandss
Restore the in
nstalled settin gs.
F acility Commo
on -61
Facility
F Com
mmon / Drrawing a Stteel Work
3.
3 Set U bolts
A: Specify the
e length from tthe bottom ele
evation of the specified routte to the tip of the screw.
B: Specify the
e U bolt screw
w diameter.
4.
4 Set U bandss
A: Specify the
e length from tthe bottom ele
evation of the specified routte to the tip of the screw.
B: Specify the
e thickness off U bands.
C: Specify the
e width of U b
bands.
D: Specify the
e screw diame eter of U band
ds.
5.
5 Set hanger saddles
A: Specify the
e length from tthe bottom ele
evation of the specified routte to the tip of the screw.
B: Specify the
e thickness off the hanger sa
addle part.
C: Specify the
e width of the hanger saddle leg part.
D: Specify the
e band thickne ess.
F acility Commo
on -62
Facility Comm
mon / Draw
w Support Parts
6.
6 Set hanger bands
A: Specify the
e length of the
e hanger part.
e width of the band part.
B: Specify the
C: Specify the
e thickness off the band partt.
7.
7 Set urethane hanger bands
A: Specify the
e length of the
e hanger part.
B: Specify the
e width of the band part.
C: Specify the
e thickness off the band partt.
D: Specify the
e thickness off the urethane part.
8.
8 Set urethane U bands
A: Specify the
e length from tthe urethane bottom.
b
B: Specify the
e thickness off the band partt.
C: Specify the
e thickness off the urethane U band leg.
e width of the band part.
D: Specify the
E: Specify the
e thickness off the urethane part.
F acility Commo
on -63
Facility
F Com
mmon / Drrawing a Stteel Work
9.
9 Set roller ha
anger bands
A: Specify the
e length of the
e hanger part.
e width of the band part.
B: Specify the
C: Specify the
e thickness off the band partt.
10.
1 Set floor-standing rollerss
A: Specify the
e length from tthe part bottom
m.
B: Specify the
e thickness off the band partt.
C: Specify the
e width of the band part.
11.
1 Set upright bands
e length of the
A: Specify the e upright part.
B: Specify the
e thickness off the band partt.
C: Specify the
e width of the band part.
F acility Commo
on -64
Facility Comm
mon / Draw
w Support Parts
F acility Commo
on -65
Facility
F Com
mmon / Drrawing a Stteel Work
Make
M settings to use when the
t subject pa
art is “route” an
nd the process method is “C
CG wiring - racceway”.
he pitch for layying out at the specified pitcch from the cen
14. Input th nter, as a 1-by
yte integer in tthe range 300~99999, inclusive.
18. Input the pitch for laying out at uniform intervvals not exce
eeding the specified pitch, as a 1-byte integer in the
e range
300~99999 9, inclusive.
F acility Commo
on -66
Facility Comm
mon / Draw
w Support Parts
28. Input the pitch for laying out at uniform intervvals not exce
eeding the specified pitch, as a 1-byte integer in the
e range
300~99999 9, inclusive.
32.
3 Temperatu
ure settings for hanger band d size calculattions for refrige
erant pipes
emperature to use in hanger band size ca
Specify the te alculations for fluid pipes an
nd gas pipes.
F acility Commo
on -67
Facility Common / Drawing a Steel Work
2-pipe formula
Fluid pipe size + gas pipe size + (fluid pipe insulation thickness + gas pipe insulation thickness)x2
3-pipe formula
Fluid pipe size + gas pipe size + outlet gas pipe + (fluid pipe insulation thickness + gas pipe
insulation thickness*2)x2
Description
n of the Full-Thread Bolt
B Setting
gs dialog box
b
▲TOP
2. Standard e
elevation
Specify the fo
ollowing eleva ation position when “Draw on ull-thread bolt length”
o one elevatiion” and “3. fu
are both set to
t “Specify (fixxed vertical)”.
3. Full-thread
d bolt length
t full-thread bolt length to use with “Dra
Specify the aw on one elevvation”.
[1] Speciification
Determine the leng gth between tw wo specified points.
p
The actual
a ead bolt is calculated from distance betw
length of the full-thre ween specified d points + Advanced
Settin
ngs dialog box x [full-thread b
bolt] - [Commo
on] embedded length.
The added
a embed dded length ad dopts the high
her elevation of
o the two speecified points. It is not adde
ed if the
two specified
s pointts are at the saame elevation
n.
F acility Commo
on -69
Facility
F Com
mmon / Drrawing a Stteel Work
4. Full-thread
d bolt sizes
Select th
he full-thread bolt
b size, from [9, 12, 16, 19 9].
Use withh the Draw Sup pport Parts co
ommand.
The seleections of [Speecify, Same ass insert] are not available with
w this comm
mand. (Use the
e Draw Support Parts
comman nd)
5. Equipmentt type
Select thhe full-thread bolt
b and insertt equipment ty ype, from [Elec
ctrical, HVAC//SAN].
full-threa
ad bolts and innserts drawn aas [Electrical] are not counteed by the HVA AC/SAN Materials - Materia
al Count
comman nd, while thosee drawn as [HV VAC/sanitary] are not countted by the Eleectrical - Materrial Count com
mmand.
Also, notte that there is
s no function fo
for changing equipment
e for drawn
d full-threead bolts and inserts.
Description
D of the Set Steel
S Parts// Metal Sup
pport Parts (Electrical)
( dialog
d box
▲TOP
Display the fo
ollowing dialog
g box when th
he subject partts are inserts and
a routes.
3. Metal supp
port parts for raceways
r
upport fixture, you can creatte only Hanger settings(for rraceway).
Raceway su
You cannot be selected in
n the combo box.
b
4. Metal supp
port parts for CG
C wiring
Select metal support parts for CG wiring from the follo owing.
- “Hanger ban nd”, “multi han
nger band”, “P
PVC-coated ha anger band”, ““cushioned ha
anger band”, “hhanger-
type hanger band”
b
“other hanger bands”, “ha anger saddle”
5.Orient meta
al support parrts
Orientation caan be selectedd with subjectt part - route, and
a selected m metal support part - hangerr saddle.
This inverts th
he placement orientation off a hanger sad ddle.
F acility Commo
on -70
Facility Comm
mon / Draw
w Support Parts
Description
D n of the Set Steel Parrts/ Metal S
Support Parrts (HVAC/sanitary) d
dialog box
▲TOP
Display the fo
ollowing dialog
g box when th
he subject partts are inserts and
a routes.
3. Metal supp
port parts for circular
c ducts
Select metal support parts for circular du
ucts from the following.
f
- “Hanger ban nd”, “multi han
nger band”, “P
PVC-coated ha anger band”, ““cushioned ha anger band”, “h
hanger-
type hanger band”
b
“other hangerr bands”, “upriight band”
However, when the subjectt part is “inserrt”, only hange
er metal suppoort parts can be
b selected.
5. Metal supp
port parts for pipes
p
Select metal support parts for pipes from m the following
g.
- “U bolt”, “U band”, “urethaane U band”, “hanger
“ band””, “PVC-coatedd hanger band d”
“cushioned ha anger band”, ““hanger-type hanger
h band”,, “urethane haanger band”, “o
other hanger band”
b
Hanging rolle er band, freesttanding roller band,
b upright band
However, when the subjectt part is “inserrt”, only hange er metal suppoort parts can be
b selected.
If use Draw Settings
S is che
ecked, the draw w settings are
e followed.
F acility Commo
on -71
Facility
F Com
mmon / Drrawing a Stteel Work
Description
D n of the Set Steel Parrts/ Metal S
Support Parrts (HVAC/sanitary) d
dialog box
▲TOP
Display the fo
ollowing dialog
g box when th
he subject partts are freely se
elected.
1. Pattern
Press the buttton to displayy the following
g dialog box, then select thee combination pattern to use when
drawing parts
s.
4. Edge direcction
This inverts th
he orientation of the edge.
5. Combinatio
on draw size
e sizes W1, H 1, and H2 thatt are displayed
1. Specify the d in the patterrn window.
Use the Meas surement buttton to refer to the value.
6. Layout ang
gle
Specify the plan and sectio on angles of placed combina ation steel parrts.
If the plan angle is 0°, secttion rotation an
ngle 1 is the angle on the froont view and back
b view, and
d
on angle 2 is tthe rotation an
section rotatio ngle of the righ
ht side view annd left side vie
ew.
Use the Meas surement buttton to refer to the value.
7. Base pointt
Specify the la
ayout referencce position of placed
p combin
nation steel paarts.
Prrecautions
▲TOP
1. Trimming
In continuous
s drawing, if cconnected parrts overlap orthogonally in tthe same specified plane, perform
p
trimming with
h priority for the
e previously-d
drawn shape.
2. Rubber dissplay
es, the size ma
In some case ay mean that the
t thickness portion appeaars to be a sing
gle line.
The same is true
t for CG.
3. Edge displlay
In some casees it is not po aw dotted lines for teeth/ eedges, due to angle and elevation
ossible to dra
conditions.
After drawing
g, use the Ch hange Figure Style comma and or the Str tretch/ Trim co
ommand etc. to edit
components.
F acility Commo
on -73
Facility
F Com
mmon / Drrawing a Stteel Work
Us
sage Example
▲TOP
1. Operation example of drawing
d supp
porting steel p
parts with Su
ubject part - In
nserts on an electrical rou
ute
(2) Dra
aw
[2] Drraw.
F acility Commo
on -74
Facility Comm
mon / Draw
w Support Parts
2.
2 Operation e
example of drawing metall support parrts with Subje
ect part - Inse
erts on an HV
VAC/SAN routte
(2) aw
Dra
[2] Drraw.
F acility Commo
on -75
Facility
F Com
mmon / Drrawing a Stteel Work
3.Operation
3 e
example of drawing
d meta
al support pa
arts with Sub
bject part - Route
R and P
Processing method
m - CG wiring,
raceway
r on a
an electrical route
(2) aw
Dra
[2] Draw.
D
F acility Commo
on -76
Facility Comm
mon / Draw
w Support Parts
4.
4 Operation e
example of drawing
d steel support partts with Subje
ect part - Route and Proceessing metho
od - Single route, on
an
a HVAC/SAN N route
<Command
< to
oolbar>
F acility Commo
on -77
Facility
F Com
mmon / Drrawing a Stteel Work
5.
5 Operation e
example of drawing comb
bination steell parts with Subject
S part - Free
(2) aw
Dra
[2
2] ombination steeel parts.
Draw co
F acility Commo
on -78
Facility Commoon / Drawin
ng a Steel Work
Modify
M ying a Steel Work
k
Function
F O
Overview
How
H to Lau
unch the Command
1. Pulldown MMenu
Click [F
Facility Commo
on (C)] [Mo
odifying a Stee
el Work [H].
2.
2 Icon menu
Co
ommand To
oolbar Des
scription
1. Command S
Selection Select comm
mands related
d to Facility Co
ommon.
2.
2 Select Proccess Type Select the process
p type ffrom [Move aftter connect, Stretch, Changge].
1: Check
C to chang ge the type an nd size of the target
t steel paart.
2: Select
S the steeel part type afte
er the change.
3: Select
S the steeel part size afte
er the change.
4: Check
C to reflecct the edge orientation of thee target steel ppart.
5: Iff this is checke ed, change the e type and thicckness of subjbject steel plate
e.
6: Select
S the chan nged steel plaate type.
7: Select
S the chan nged steel plaate thickness.
F acility Commo
on -79
Facility Common / Drawing a Steel Work
3. Select Move Method Select the move method [Absolute, Relative, Reference, Input].
(1) Absolute
Move by specifying a destination location based on a specified part.
(2) Relative
Move a relative distance by specifying source and destination points.
(3) Reference
Specify a line upon which to base the movement to move a set distance (input value) from
this base position.
(4) Input
Input a distance (input value) to move that distance measuring from the specified part.
Precaution
P ns
2.
2 Movement Direction Mov
vement is perp
pendicular to thhe long side of
o the specifiedd part.
The movement dirrection of the metal supportt part follows tthe linked routte.
3. Edit steel p
parts
- Steel suppo ort parts and m
metal supportt parts linked to routes can only have their types chan
nged to
parts that can be drawn o on the route cooncerned.
- metal suppo ort parts canno
ot be changed d from hanger-type metal suupport parts (h
hanger bands etc.) to
non-hangerr metal supporrt parts (U ban nds etc.)
Changes in the reverse d direction are also impossible
e.
Usage
U Example
1. Move a strructural member using [Ab
bsolute] mov
ve method
F acility Commo
on -81
Facility
F Com
mmon / Drrawing a Stteel Work
2. Move a s
structural me
ember using [Relative] mo
ove method
(2) “Spe
ecify Move So
ource/Destination”
[2] y the move so
Specify ource and mo ove destinatioon.
Specify move source (2), move desstination (3).
Return to
t (1) screen after
a moving.
3. Lengthe
en a structura
al member
F acility Commo
on -82
Facility Commoon / Drawin
ng a Steel Work
4.
4 Operation E
Example of Changing
C Steel Part Sizes
F acility Commo
on -83
Fa
acility Com
mmon / Dra
awing a Break Symbo
ol
Drawin
D ng a Break
B Symb
S ol
Function
F O
Overview
Draw Cross se
ection displayy symbols
How
H to Lau
unch the Command
1. Pulldown MMenu
Click [F
Facility Commo
on (C)] [Dra
awing a Breakk Symbol [S].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Command
C Toolbar De
escription
1. Command S
Selection Select comm
mands related
d to Facility Co
ommon.
2.
2 Remove Se
ection Lines Sets the whether to remo ove section line
es.
(1) If checkeed:
Remove e section liness when drawing.
(2) If not che
ecked:
Do not remove
r sectioon lines when drawing.
d
3.
3 Arrow Patte
ern Set whetherr to draw arrow
ws facing in orr facing out.
5.
5 Detail Butto
on Configure additional Crosss section disp
play symbol se
ettings such ass color, line ty
ype or text heig
ght.
F acility Commo
on -84
Facility Common / Drawing a Break Syymbol
2.
2 Symbol/Arrrow Size Input the size for marks, arrrows.
(1) Circle radius
Input thee circle radiuss for use when n drawing text marks.
(2) Arrow/cirrcle offset (C)
Input thee distance from m arrow tip too circle edge when
w drawing ttext marks.
(3) Arrow length 1 (D)
Input thee line length foor length of the arrow lookin
ng in the direcction of the arrow.
(4) Arrow length 2 (E)
Input thee line length foor the base off the arrow.
(5) Arrow length 3 (F)
Input thee line length foor the protrusiion perpendicuular to the sidee of the arrow
w head.
(6) Arrow anngle (Theta)
Input thee angle of the tip of the arroow.
3.
3 Drawing La
ayer Set whether to
S o use a Cross section displaay symbol drawing layer.
(1) If input la
ayer is turned on:
Cross section displayy symbols are drawn on the input layer.
(2) If specified layer is turrned on:
Cross section displayy symbols are drawn on the specified layeer. The specified layer is sho
own.
Click thee [Reference] button to sele
ect the drawing
g layer. See LLayer Commannds
F acility Commo
on -85
Fa
acility Com
mmon / Dra
awing a Break Symbo
ol
Contextual
C l Menu Des
scription
1.
1 Contextual Menu D
Describes the context-sensiitive informatio
on.
Precaution
P ns
2.
2 Paper layou
ut Cut symbo
ols can be draw
wn on paper la
ayouts.
F acility Commo
on -86
Facility Common / Drawing a Break Syymbol
Usage
U Example
1. Draw Cros
ss section display symbo
ols
<Command
< to
oolbar>
(3) aw”
“Dra
(3) Draw.
Draw Crross section display symbolls.
F acility Commo
on -87
Fa
acility Com
mmon/Flo
oor Line
Floor
F Line
Function
F O
Overview
How
H to Lau
unch the Command
1. Pulldown MMenu
Click [F
Facility Commo
on (C)] [Flo
oor Line (F)].
2.
2 Icon Menu
C
Click the icon shown to the left.
Co
ommand To
oolbar Des
scription
1. Command S
Selection Selectt commands re
elated to Facility Common.
2.
2 Starting Ma
ark point for drawing floor lines.
Selectt the starting p
3.
3 Side length Speciffy the actual d t horizontal width of floor lines.
dimension for the
4.
4 Reference sside length Bu
utton Refere
ence the horizzontal width.
5.
5 Vertical length Speciffy the actual d
dimension for the
t vertical he
eight of floor linnes.
6.
6 Reference V
Vertical length
h Button
Refere
ence the verticcal height.
7.
7 Detail Butto
on Open the advanced
d settings dia
alog to configure settings ssuch as floor line marks a
and text
on.
positio
F acility Commo
on -88
Faccility Comm
mon / Floor Line
2. Symbol of g
ground floor number
n
Specify the above gro
ound floors ma
ark.
3.
3 Floor Heigh
ht Specify height of the ffloor/level.
4.
4 Reset Butto
on Reconfigure [2. Abovee-ground Flooor Number Mark] and [3. Flooor Height] again according to the
automattic mark input mode of the advanced
a settings dialog.
6.
6 Symbol of b
basement floo
or number
Specify the below gro
ound floors ma
ark.
7.
7 Floor Heigh
ht Specify height of the ffloor/level.
8.
8 Reset Butto
on Reconfigure [6. Symbbol of basement floor numb
ber] and[ 7. Flooor Height] ag
gain according to the
automattic mark input mode of the advanced
a settings dialog.
9.
9 Detail Butto
on he advanced ssettings dialog to configure settings
Open th s such aas marks and text position.
n
11. OK Button Draw the floor lines.
Advanced S
Settings Dia
alog Description
2.
2 Symbol dra
aw position X Spec
cify the (B) syymbol position X (mm) using
g the scale at ttime of drawin
ng output.
3.
3 Floor Numb
ber Draw Position X Spec
cify the (C) Flo
oor Number te
ext position X (mm) using thhe scale at tim
me of drawing output.
o
4.
4 Position to draw floor num
mber Y Spec
cify the (D) Flo
oor Number teext position Y (mm) using thhe scale at tim
me of drawing output.
o
F acility Commo
on -89
Facility Common/Floor Line
6. Position to draw floor height X Specify the (F) floor height position X (mm) using the scale at time of drawing output.
7. Offset FL height text Specify the (G) floor height text offset (mm) using the scale at time of drawing output.
12. Floor Height Right Side Set when draw floor height is enabled.
- Draw floor height on the right when enabled.
- Do not draw floor height on the right when disabled.
15. Floor Height Total Right Side Set when draw floor height total is enabled.
- Draw floor height total on the right when enabled.
- Do not draw floor height total on the right when disabled.
16. Automatic Symbol Input Mode When enabled, set number of floor symbols (above/below ground), floor height for new
drawing dialog.
When disabled, do not set number of floor marks (above/below ground), floor height for
new drawing dialog.
Additionally, settings from 17-24 below are used.
17. Ground settings Front Set text to append before the floor number for above-ground floor number in the new
drawing dialog.
Specify a prefix up to 4 characters in length.
19. Ground settings Back Set text to append after the floor number for above-ground floor number in the new
drawing dialog.
Specify a suffix up to 4 characters in length.
21. Basement settings Front Set text to append before the floor number for below-ground floor number in the new
drawing dialog.
Facility Common -90
Faccility Comm
mon / Floor Line
Specify
S a suffixx up to 4 charracters in length.
22.
2 Basementt settings Startting floor number
Set
S the starting
g number for below-ground
b floor mark in the new draw
wing dialog.
Specify
S a who le number bettween 0 and 99.
9
23.
2 Basementt settings Backk Set
S text to ap ppend after th he floor numb w-ground floor number in th
ber for below- he new
drawing
d dialog
g.
Specify a sufffix up to 4 characters in leng
gth.
24. Basemen
nt settings Con
nfig value floor height
Set
S below-grou und floor height in the new drawing dialogg.
Specify
S a who le number bettween 1 and 99999.
9
Precaution
P ns
1. Drawing T
This command
d is only availa
able for flat pla
ane drawings..
2.
2 Drawing La
ayer Floor lines are
a drawn on tthe layer confiigured using thhe layer toolbaar.
The last useed layer setting
gs will be also
o used the nex
xt time the commmand is launnched.
However, a different layerr might be use ed when editin
ng multiple draawings at the same
s time.
3.
3 Floor Heigh
ht, Floor Heigh
ht Total There
T is no dim
mension group
p for floor height and floor heeight total.
Editing is no
ot possible usiing the Chang
ge Dimension or Stretch com mmands.
Also, floor lines are drawnn spaced out at intervals eq
qual to: verticaal height x (flo
oor height/floorr height
total).
4.
4 Jumps Jumps may be configured d for the follow
wing items.
(1) Style Settings
(Textt properties wi ll always be set to Real)
(2) Comm mand toolbar ssettings
(3) New dialog
d settingss
(4) Advannced dialog se ettings
Note: Settin
ngs may not b be properly ap pplied in some
e cases whenn floor lines arre edited using other
commands.
Usage
U Example
<Command
d toolbar>
2.
2 Set marks and floor he eight for above
e-ground
floor
f numberss.
(Set automattically if the Automatic
A Maark Input
mode is enablled in the Adv
vanced dialog))
Above-grounnd floor numbeer mark 1 1F
“ “ 2 2F
“ “ 3 3F
“ “ 4 4F
3.
3 Set the be
below-ground floor numberrs in the
same
s way.
F acility Commo
on -91
Fa
acility Com
mmon/Flo
oor Line
Below-grounnd floors 1
4.
4 Set marks and floor he eight for below
w-ground
floor
f numberss.
Below-grounnd floor numbeer mark 1 1F
“ “ 2 B1F
Floor Height 1-2 4000 0
5.
5 Click the [O
OK] button.
(2) “Spe
ecify Drawing Position”
[2] Specify
S the p
position to drraw floor lines s.
Specify
S positioon (1) to draw
w floor lines.
(3) “Draw
w”
(3) Specify
S the p
position to drraw floor lines
s.
Return to Speecify Drawing Position afterr drawing
floor
f lines.
Facility Commo
on -92
Faciility Comm
mon / Findin
ng Interfere
ences
Findin
F g Interferen
nces
Fu
unction Ove
erview
Check
C for inte
erference betw
ween electricall, duct or pipe parts within a specified are
ea.
Ho
ow to Laun
nch the Com
mmand
1. Pulldown MMenu
Click [Faccility Common (C)] [Findin
ng Interferencces [I].
2.
2 Icon Menu
Co
ommand To
oolbar Des
scription
1 2 3 4 5 6 7
1.
1 Command S
Selection Select comm
mands related
d to Facility Co
ommon.
2.
2 Select Process Type Select the process
p type.
(1) Batch finding
Applie
es to all parts in the selectio on area.
(2) Individ
dual checking
Find interferences b between two specified
s parts
s.
The fo
ollowing 1-line e parts cannott be specified using this com mmand.
Ducts: fittings, ddampers, flexible parts
Pipes:
P fittings,, valves, etc.
(3) Batch checking
Showw marks for inte erference with hin the selectio
on area as a liist.
(4) Individ
dual checking
Showw information fo or the specifieed interferencee mark.
3.
3 Target partss setting Set whether or not consttruction parts, equipment/d devices, electrrical route parts, duct route
e parts,
and pipe rou ute parts are ssubject to interference checks.
(1) If butto
on is ON:
Interfe
erence checkiing will be performed.
(2) If butto
on is OFF:
erence checkiing will not be performed.
Interfe
4.
4 Interference
e Mark Starting
g Number Set
S the starting
g number for in
nterference marks.
5.
5 Reference D
Drawing Interfference Check k
Set whether to check for interference forf the referenced drawing.
(1) If checcked:
Interfe
erence checkiing will be performed.
(2) If not checked:
c
Interfe
erence checkiing will not be performed.
6.
6 Delete Interrference Mark Delete all interference ma
arks shown on
n the screen.
7.
7 Detail Settin
ngs Configure advanced settin
ngs.
F acility Commo
on -93
Fa
acility Com
mmon/Fin
nding Interfferences
Ad
dvanced Se
ettings Dia
alog Description
1.
1 Interference
e check metho
od setting Se et the interfere nce check me ethod.
Normal modem
Make a more detailed d check than ini simple mode.
- Check k all Warning aand Caution.
- Interfe
erence informa ation is display
yed in the inte
erference resuult details.
- Searcch by approxim mating circularr column forms s to octagonall columns.
Simple mode
The pro ocess is simpl ified to make it faster than Normal
N mode..
- Check ks are not perfformed on Wa arning and Caution.
- Interfe
erence informa splayed in the interference rresult details.
ation is not dis
- Searcch by approxim mating circularr column forms s to square coolumns.
2.
2 Interference
e Mark Size Setting interference markk size on relea
ase of drawing
3.
3 Mark Displa
ay Settings Configure display settingss for warning and
a caution marks.
m
- If checcked:
Show warning/ca aution marks.
- If not checked:
c
Doo not show wa rning/caution marks.
4.
4 Insulation S
Setting Set whetherr to consider thhe thickness of
o duct/pipe insulation whenn checking for interferences.
- If checcked:
Inc
clude insulatio
on.
- If not checked:
c
Doo not include in
nsulation.
5.
5 Warning Disstance ance for warniing of interfere
Set the dista ence between parts.
F acility Commo
on -94
Faciility Comm
mon / Findin
ng Interfere
ences
1.
1 Interference
e Result List Dialog
D
Process TType: Show a list of basic information abo
out interferenc
ce marks in the
e selection areea when perfo
orming “Find All.”
A
(1)
( Interferencce Result Show the nu umber of locattions with NG,, Warning or Caution
C as thee result.
(2)
( Interferencce Information Show a basic list of interfeerence locatio
ons.
Columns ca an be sorted byy No., Object 1, Object 2, and Result.
(3)
( Plot Buttonn Output the list of interfere
ence results to
o a printer.
( Copy result Button
(4) Copy basic information off interference locations (2) to the clipboarrd.
(5)
( Detail Buttoon Show detailed interferencce information about the itemm No. selectedd in (2).
The Interference Result D Details dialog is
i shown.
2.
2 Details of in
nterference checking resultss Dialog
Process Type: Show detailed info ormation abo
out interferenc dependently, Review
ce results affter clicking tthe Find Ind
Independe ently or Revie
ew All buttons.
(1)
( Show Interrference Results w the interfere
Show ark number annd result (Fail,, Warning, Caution).
ence result ma
F acility Commoon -95
Fa
acility Com
mmon/Fin
nding Interfferences
(2)
( Show Interrference Objecct Information Showw information about the interfering objectss (layer name, product nam
me, size,
insu lation, level, etc.).
e
(3)
( Show Interrference Inform
mation Show w the distance
e between surrfaces and disstance betwee
en centers of
interrfering Object 1 and 2 their X,
X Y, Z axis diistances.
(4)
( Plot Button
n Outp put interferenc
ce results to a printer.
Prrecautions
1.
1 Interference
e Marks The conditioons for displayying interferen nce marks are as follows:
- Fail: Objec
cts 1 and 2 are e touching eac
ch other.
- Warning: The surfaces of Objects 1 and 2 are closer to each other than th he minimum distance
d
specified in A Advanced Settiings. (Not including fittings, valves, damppers, etc.)
- Caution: When
W fittings, vvalves or dam
mpers are spec cts to check for interference,,
cified as object
"Cauttion" is shown n when closer than the minim mum distancee when it is diffficult to make an
accurrate determina omplexity of part shape.
ation due to co
2.
2 Different Sccale Interference possible for different scales it is the samee as the different scale currrently in
e checking is p
use.
3.
3 Insulation T
Thickness Com
mpensation
Consider th he thickness o
of insulation co
onfigured in the [Establishingg Project Stan
ndards] when looking
for interfere
ences.
[HVAC and Plumbing] – [Route/Fitting g] – [Settings by route funnction] – [Fittting] – [Thickn
ness of
thermal insu ulation materia
al])
4.
4 Surface to S
Surface Distan
nce and Cente
er to Center D
Distance in Inte
erference Results
F acility Commo
on -96
Faciility Comm
mon / Findin
ng Interfere
ences
5.
5 Surface to S
Surface Distan
nce and Centeer to Center D
Distance
Center to Ce
enter: Used too show interference with rou
und objects (roound ducts, sttraight pipes).
Surface to Surface:
S Geneerally this is sh
hown.
6.
6 Part Types Interferen
nces are foundd for the follow
wing types of parts.
p
(1) Construcction parts
Columnns, walls, beam ms, floors, ceiling, roofs
Howeve er, interferencce checks are not performed d between connstruction partts.
(2) Equipmeent/devices
Only target equipmen nt/devices tha
at have section
nal forms
(3) Electrica
al
Racewa ays, cable raccks, metal duc
cts, bus ducts
(4) Duct rouutes
Straight ducts, elbow ws, tees (RT pipes),
p wye (R
RTR pipes), crross (WRT pipes), tapers, offsets,
double offsets, grillee boxes, silenncers, canvas ses, wall sleeeves, cap end ds, screens, collars,
pinkies, duct flex, equuipment ductss, dampers, VA AV, CAV, plennum chambers s
(5) Pipe rouutes
Straight pipes, elbow ws, tees, sockket and reducers, cross, doouble-Y, caps, plugs, flange es, cap
ends, combined
c flangges, unions, under
u floor cle
eanouts, refriggerant fittings, concentrated
d pipes,
valves
F acility Commo
on -97
Fa
acility Com
mmon/Fin
nding Interfferences
7.
7 Interference
e Verification Method
(1) Equipmeent/devices
Create a box for the minimum recttangle range, and
a check inteerference.
Example) Pump
(2) Electrica
al
A box iss drawn corre esponding to the height and width of the rraceway, cable rack, metal duct or
bus ducct in order to ffind interferenc
ces.
Howeve er, boxes are e drawn corresponding to the
t connectionn dimensionss of each connection
point fo
or finding interfference.
- Fitting
gs specified byy user using th
he Run Commmon Settings ccommand – “A Add Pipe/Fitting
g/Valve”
A rectangular box is d drawn in the smallest
s possible dimensionn to check inte
erference.
F acility Commo
on -99
Fa
acility Com
mmon/Fin
nding Interfferences
8. Interference
I C
Checking Limittations with Maaster Drawing gs and Referen
nce Drawings
The followin
ng limitations exist
e when find nces with master drawings and
ding interferen a reference drawings:
(1) Finding interferences is not supporrted when the placement zoooms for the master
m drawin
ngs and
reference drrawings are diifferent.
(2) Finding interferencess is not supported when there are diffeerent scales within the refference
drawing.
(3) Finding interferences
i is not supportted for clipped reference draawings.
Us
sage Example
1. Verify all in
nterferences after checkin
ng for all inte rferences at once
play Interferen
(2) “Disp nce Result Marks”
nterference marks are show
(3) In own on screen
n.
Fa
acility Commo
on -100
Faciility Comm
mon / Findin
ng Interfere
ences
Fa
acility Commo
on -101
Fa
acility Com
mmon/Usser propertiies
Arran
nge secction elemen
e nts
Fu
unction Ove
erview
▲TOP
Create
C or dele
ete axis eleme
ents for subjec
ct equipment p
parts.
Ho
ow to Laun
nch the Com
mmand
▲TOP
1.
1 Pulldown menu
Click on [C
Common equiipment (C)] - [Arrange
[ sectio
on elements (D)].
(
u
2.Icon menu
De
escription off the Comm
mand dialog
▲TOP
1.
1 State Speccify the displayy axis to creatte or delete.
The sttate to create or delete is maintained
m for each
e drawing..
2.
2 OK button Process display axes that have
h had state
es changed, then end the command.
De a windows are deleted automatically.
eleted display axis
Prrecautions
▲TOP
1. Lower versio
ons
1. Ussage method for “Setting e element creatioon for section
n display axess (front view, back view, rig
ght side
viiew, left side view)”
v provided
d by the Settin
ng Operation Environment ccommand.
A setting is ava
ailable under the Setting Operation
O Environment comm mand for whe
ether or not to
o create
equipment elem ments on unesstablished sec
ction view axes.
T
This function crreates equipm
ment elements according to the following m
modes.
O When in [Create] mod e (setting [1] is unchecked, the conventi onal setting), equipment elements
are alwways created in all section ns, as in CA ADEWA Real 2009 and 2011, 2 and CAADEWA
Evolutio
on.
* If CAD
DEWA Real 20013 or later is installed, it is set in this modde.
O When in [Do not creatte] mode (settting [1] is checked, the newwly expanded method), equ uipment
elementts are not crreated in sec ctions which do not havee established section view w axes.
Equipment elements are only creatted when a se ection view axxis is establish
hed, or when one
o has
been esstablished alre
eady.
This red
duces the nu mber of section elements in the “estabblish only in front f view” ca
ase, on
CADEW WA Real LT, w which does not
n establish sections, andd similar case es, reducing drawing
d
capacity
y and allowingg faster proces
ssing.
Fa
acility Commo
on -102
Facility C
Common/
/User properties
3. Prrecautions for using drawin ng which have e no equipment elements inn section view w axes on CA
ADEWA
Real 2011 or earlie er versions.
A described in (3) of 2 ab
As bove, if drawings are creatted in CADEW WA Real 2013 or later an
nd have
esstablished only some secti on view axes a (drawings in which some or all sectio
s, or none at all on view
axxes have no equipment e elements on them) and are a used in C CADEWA Re eal 2009, 201
11, and
C
CADEWA Evollution, it is neccessary to use
e the Arrangee Section Elemments command in CADEW WA Real
2013 or later, in
n advance, to create the necessary sectio on view axis eequipment elem
ments.
R
Refer eation exampl e below for ho
to the cre ow to use the Arrange Sectiion Elements command.
Fa
acility Commo
on -103
Fa
acility Com
mmon/Usser propertiies
2.
2 equipment//device partss Care is s required w
when deleting
g and then creating equuipment/devic
ces, because some
equipment/dev
e vice may chan
nge style in the
e process.
3.
3 Hidden line When a hidd eted and then created, hidden lines in the
den line is dele e section are re
restored.
Usage
U Example
▲TOP
1. Operation examples w with plan vieew, front view
w, right side
e view, and 3D view opeen, starting the comman
nd and
changing
c the
e front view frrom create to
o delete.
Fa
acility Commo
on -104
Facility Common/User properties
User properties
Fu
unction Ove
erview
▲TOP
Export or impo
ort user prope
erty attached to
o equipment / instrument orr IFC group to CSV file.
Ho
ow to Laun
nch the Com
mmand
▲TOP
1.
1 Pulldown menu
Click [[Common Equ
uipment (C)] → [User Prope
erties (P)].
u
2.Icon menu
C
Click the icon shown to the left.
De
escription off Command
d Toolbar
1.
1 CSV file
Specify the CSV file re
ead / write path
h.
2.
2 Read button
n
Read the e edited CSV file
f and update
e the user pro
operties assign
ned to the equuipment / instru
uments or IFC
C group
in the dra
awing.
3.
3 Write button
n
he device prop
Writes th perties of the a
active drawing FC group to the CSV
g or the user properties assiggned to the IF
file.
You can edit the exporrted CSV file a
and add, delette or change attribute
a itemss.
4.
4 Open autom
matically after export
Check th his when opening with the ap
pplication associated with th
he exported C
CSV file.
De
escription off the Comm
mand dialog
1.
1 Member listt
mbers with use
List mem er properties w
written out in CSV
C file.
2.
2 Copy selectted item to clip
pboard
Copy the e selected line
e in the membe
er list to the cllipboard.
3.
3 Reflect butto
on
In the member list, refflect the user p
property of the
e member who
ose "reflect" iss checked in th
he drawing.
Fa
acility Commo
on -106
Facility C
Common/
/User properties
Prrecautions
1. About user p
property handling in Real 20
015 which hass not been upddated
User properties can noot be checked with propertie
es.
Usage
U Example
1.Example
1 of export opera ation
(1) "Sppecify the writee path" [1] Sp
pecify the exxport path of the
t CSV file
(3) "O
Open automatically after writing"
w [3] Check
C "Open
n automatically after ex xport"
and
a press "W
Write" to open
n the CSV file
2. Example o
of reading opperation
(1) "Specifying a readd path" ① Specify the read path of the CSV file
(2) "
"Press the read
d button" ② Press the reaad button
Reading list w
will be displayed
d
(3) "
"Update draw
wings"
Fa
acility Commo
on -107
Create an building diagram
Building
1 Column Grid Line
2 Column
3 Wall
4 Beam
5 Stair
6 Foundation
7 Slab
8 Ceiling
9 Roof
10 Fixtures
11 Building Hatch
12 Finishing
13 Beam Annotation
14 Grid
15 Modifying a Structural Members
Buuilding / Co
olumn Grid
d Line
Colum
C mn Grid Line
e
Function O
Overview
Draw a Colum
mn Grid Line.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Column Grid Line (A)].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Process Se
election Select to drraw or edit Co lumn Grid Line.
(1) New
Draw ne ew Column Grrid Line.
(2) Add Sing gle
Add axis s to the Colum
mn Grid Line of
o an existing drawing.
d
(3) Move Sin ngle
Move ax xis of the Colu
umn Grid Line of an existing g drawing.
(4) Delete Single
S
Delete axis
a of the Collumn Grid Line e of an existing drawing.
(5) Batch Ed dit
Edit Column Grid Line e of an existing drawing.
(6) Draw Sin ngle
Draw a new single axxis for a Colum mn Grid Line.
3.
3 Input Angle
e Input an angle.
4.
4 Angle Reference Button Select the angle
a referencce method.
5.
5 Complete S
Selection Complete th
he X-axis/Y-axxis selection fo
or selection us
sing the mousse.
Button
6.
6 Detail butto
on Configure additional
a Colu
umn Grid Line settings such
h as color, linee type or text height.
h
1.
1 Label Settin
ngs Coonfigure setting
gs such as lab bel location, la
abel text string or decrease/iincrease label text.
Foor label placemment, select “sstart/end point,” “start point,”” “end point” oor “none.”
Foor label text am
mount, count u up/down alpha anumeric characters for timee drawn.
“=””: Do not channge label text sstring after dra
awing.
“+””: Count up labbel text string after drawing.
“-”: Count down label text strin ng after drawin ng.
2.
2 Set Text An
ngle S the label te
Set ext angle.
Fixed”: Draw text at 0 degre
“F ees angle rega
ardless of the axis angle.
“S
Specified”: Dra
aw based on tthe axis angle and adding th
he specified a ngle amount.
Construction--109
Bu
uilding / Column Grid
d Line
3.
3 Set Angle C
Correction Configure angle correctio on.
(1) If checked:
Perform ang gle correctionn. Correction isi normally peerformed in 445 degree increments base ed on 0
degrees.
e is specified, correction is performed in 45
If a base line 4 degree inccrements from this base line
e.
(2) If not checked:
Do not perfo orm angle corrrection.
New Draw
wing Dialo
og Descripttion
1. Input Axis L
Label Input label for X-axis.
Preess the Enter key at the axxis label edit box
b on the ab bove dialog too move the cuursor to the ne
ext axis
lab
bel input field and automaticcally display the
t text string. Automatic ddisplay can be
e configured in
n either
texxt ascending order
o or desce
ending order.
2.
2 Input Axis S
Spacing Inp
put spacing foor X-axis.
ess the Enter key at the axiis spacing edit box on the above
Pre a dialog to move the cu ursor to the ne
ext axis
spa
acing input fie
eld and automaatically display
y the same va
alue as the preevious input.
3.
3 Input Axis L
Label Input label for Y-axis. Operatio
on is the same
e as for X-axis.
4.
4 Input Axis S
Spacing Input spacing forr Y-axis. Opera
ation is the sa
ame as for X-a
axis.
5.
5 Input Numb ber of Input the numberr of X-axis line
es.
Axis Lines Connfigure a value
e to enable seetting labels/sp
pacing for with
hin the numbeer of axis lines configured.
6.
6 Reset Butto
on Resstore X-axis settings/input vvalues to their default setting
gs/values.
7.
7 Input Numbber of Input the numberr of Y-axis line
es.
Axis Lines
8.
8 Reset Butto
on Resstore Y-axis settings/input vvalues to their default setting
gs/values.
9.
9 Set by mouse Tra
ansition from th he New dialog g to mouse selection handlinng (tracing).
Button Speecify an X-axis line elemen t and specify with command toolbar seleection complettion button, sp pecify a
Y-a
axis line element and speccify with comm mand toolbar selection com mpletion button, return to th he new
dialog and set ax xis spacing. Axxis labels are automatic.
Axis lines after thhe second linee can only be selected if the
ey are parallel to the first X-axis line.
Alsso, the first Y-a
axis line can o
only be selecte
ed if perpendic
cular to the X--axis.
The maximum number of axiss lines that can n be specified is 99 for eachh of the X-axiss and Y-axis.
Bloock elements area excluded.
on
11. Add Butto End new drawing g mode and g o to add single mode.
Use add single to add axis line
es one line at a time.
12. Independe
ently En
nd new drawin
ng mode and g
go to move sin
ngle mode.
Construction -110
Buuilding / Co
olumn Grid
d Line
move Butto
on Usse move single
e to move axiss lines one line
e at a time.
14.
1 Draw Single button End new drawinng mode and go to drawingg one single ax
xis of a Colum
mn Grid Line.
Draw a single new
n Column G
Grid Line axis separately
s from a Column G Grid Line with multiple axes.
1 Label Configuration
15. Open the Labell Configuration
n dialog and configure
c the la
abel input modde.
Button
16.
1 Details Button O
Open the Detailed Settings d
dialog to configure lines, tex
xt, elevation.
17.
1 Style Conffiguration En
nd new drawin
ng mode and g
go to style settting.
Button Set Column Grid
G Line axis/llabel attributes abel circle radi us)/dimension
s (including la n attributes.
Label Co
onfiguration
n Dialog De
escription
1. Set Label In
nput Mode Set the X-axis/Y-axis inpu ut mode.
(1) Input modde
Individually set axis lab
bel/axis spacin
ng.
(2) Auto mod de
Press the Enter key durring axis spac cing input to au
utomatically crreate the axis label.
Change th he value in asscending or deescending orde er based on thhe prior set va
alue to set the
next value
e.
2.
2 Input X-axiss Label Input the de
efault value fo r X-axis label for auto mode
e.
3.
3 Input Y-axiss Label efault value fo r Y-axis label for auto mode
Input the de e.
4.
4 Set Label O
Order Set either ascending
a orde
er or descending order for auto-creation.
a
Construction--111
Bu
uilding / Column Grid
d Line
Advance
ed Settings Dialog Description
1.
1 Input Colum
mn Grid Line Input the ex
xcess length fo
or both ends of
o X-axis for the Column Gridd Line.
Excesss Length X
2.
2 Input Colum
mn Grid Line Input the ex
xcess length fo
or both ends of he Column Griid Line.
o Y-axis for th
Excesss Length Y
3.
3 Input Colum
mn Grid Line Input the length of first sttep for parallell (vertical) dimension for thee Column Grid
d Line.
Dimension 1st Step
Length
4.
4 Input Colum
mn Grid Line Input the length of secon d step for para
allel (vertical) dimension forr the Column Grid
G Line.
Dimension 2nd Step
Length
5.
5 Set Upper D Dimension Set the dimension drawinng location.
Drawing Loccation (1) If checked:
Draw the dimension a at the top of Column Grid Line on flat surface. Alsoo, input the distance
d
between axis
a and dime ension.
(2) If not che
ecked:
Do not draaw the dimenssion at the top
p of Column Grid
G Line on flaat surface.
6.
6 Set Lower DDimension Set the dimension drawin ng location.
Drawing Location (1) If checked:
Draw the dimension att the bottom of o Column Grid Line on flatt surface. Also, input the distance
d
between axis
a and dime ension.
(2) If not checked:
Do not dra mn Grid Line onn flat surface.
aw the dimenssion at the botttom of Colum
Construction -112
Building / Column Grid Line
10. Column Grid Line Set to draw pullout lines for the Column Grid Line.
Pullout Lines
11. Draw Dimensions Set the number of steps when drawing dimensions.
Draw 2 steps Draw each of overall dimensions and dimensions for each axis interval.
Draw 2 steps Draw 1 step dimension if there are two axis lines.
(1 step if 2-axis lines)
Draw 1 step Draw dimensions for each axis interval.
13. Input bottom edge label Input bottom edge label on surface.
Set the distance from floor level (FL).
14. Input Axis Height Input the axis height from floor level.
16. Input Column Grid Line Input the excess length for both ends of Y-axis for the Column Grid Line.
Excess Length Y
17. Set Dimension Layer Set the Column Grid Line dimension layer.
(1) If set to ON for same layer as Column Grid Line:
Draw dimension on same layer as Column Grid Line.
(2) If set to ON for specified layer:
Draw on the specified layer. The specified layer is shown.
Click the [Reference] button to select the drawing layer. See Layer Command
18. default button Allowance (X,Y,Z), Position to draw dimension (Upper side, Lower side, Left side, Right side),
ower end (FL), Initialize each number in an axis height.
Construction-113
Bu
uilding / Column Grid
d Line
Distance
D D
Dialog Desc
cription
1. Input Distan
nce from Input the disstance from th
he specified ax
xis.
Column Grid Line The distance range is the e distance betw
ween the speccified axis andd axis in the direction of draw
wing.
It is not poss
sible to add orr move beyond the distance
e of the neighbboring axis.
2.
2 Input Axis L
Label Input axis la
abel using 5 h
half-width charracters.
3.
3 Set Axis Intterval Insertion
n Set the axiss drawing metthod.
(1) If checke
ed:
Draw ax xis at the locaation betweenn specified ax on of drawing with a
xis and axis iin the directio
spacing equivalent
e to th
he “distance frrom Column Grid
G Line.”
cked:
(2) If not chec
Draw axxis at the loca
ation between
n specified ax
xis and axis iin the directio
on of drawing
g at the
“distance from Column Grid Line.”
4.
4 Show Coorrdinates Grab coordinate by clicki ng left mouse button instead of manuallyy inputting distance from column
Button btained value is shown as “d
grid. The ob distance from Column Grid Line.”
Axis Lab
bel Dialog Description
D n
1. Set Axis La
abel after Set axis labbel after deletio
on.
Deletion (1) If set to “Sort”:
“
Sort axis label text strring in ascendding or descen nding order aftter deleting ax
xis label.
(2) If set to “Do
“ not chang ge”:
Make no o change even n after deleting axis label.
Construction -114
Building / Column Grid Line
Construction-115
Bu
uilding / Column Grid
d Line
Precautio
ons
1. Drawing Orrientation The label axis drawing foor flat screen when
w drawingg at a Column Grid Line ang
gle of 0 degre
ees is in
order from left
l to right forr the X-axis an
nd from top to bottom for thee Y-axis.
2. Inputting A
Axis Labels/ (1) Only half-width text sttrings may be input for axis labels/axis sppacing.
Axis Spacin ng (2) Followinng the last textt string in asce
ending or desc
cending orderr is blank.
(3) Depending on initial d data input, the mode will beccome A-set nuumber of axis lines mode orr B-free
setting mode.
m
A Set nu umber of axis lines mode First set number of axis linnes to enter th his mode and enable
setting up to the numb ber of input lines.
Everything after this cannot be co onfigured. The number of lines to be normally
n set can be
changed d.
B Free setting
s mode Input the label/spacing firs st to enter thiss mode and enable inputtin
ng up to
MAX.
In this mode
m it is not p
possible to sett number of ax
xis lines.
3.
3 Drawing La
ayout The drawing
g layout for Co
olumn Grid Lin
nes is shown in the figure.
5.
5 Pullout Line
e Style The dimension pullout line
e style is used
d for the style of Column Grrid Line pulloutt lines.
6.
6 Dimension Style Of the Colum
mn Grid Line sstyles, Dimension style can be configuredd, but modified
d items or valu
ues
are saved fo
or Column Gri d Line comma and use.
7.
7 Drawing An
ngle Column Grid
d Line angle iss corrected to between -180
0.0° ~ 180.0°.
8 Dimension Style
8. Of the Colu
umn Grid Linee styles, Dime
ension style can be configuured, but mod
dified items orr values
or Column Grrid Line command use.
are saved fo
Construction -116
Buuilding / Co
olumn Grid
d Line
9.
9 Sectional D
Drawings It is possible to draw a cross section
n of the Z-coo
ordinate axis iin the up/dow
wn direction byy using
Draw Single e.
10.
1 Paper layo
out Axis symbo
ols and dimenssions can be drawn
d on pape
er layouts.
Usage Ex
xample
1. Draw a new
w Column Grrid Line
Command toolbar
(2) “Sp
pecify Base Point”
P
(2) ecify the base
Spe e point.
Spe
ecify base poin
nt (1).
This
s is based on the leftmost and lowest in
ntersection of the
Colu
umn Grid Line
e X-axis/Y-axiss.
(3) “Drraw”
(3) Draw.
Draw the Column Grid
G Line baseed on the New
w settings.
Construction--117
Bu
uilding / Column Grid
d Line
2.
2 Add an X-a
axis to a prev
viously drawn
n Column Gri d Line (Add Single)
S
Command toolbar
(5) “Drraw”
(5) Draw Column Gridd Line.
Draw the Column Grid
G Line baseed on the settin
ngs.
Construction -118
Buuilding / Co
olumn Grid
d Line
3.
3 Add a Y-ax
xis to a previo
ously drawn Column Grid
d Line (Batch Edit)
Command toolbar
(2) “Co
onfirm Colum
mn Grid Line”
”
(2) Confiirm the Colum mn Grid Line to be edited..
Confirrm the target Column
C Grid LLine and click the left button
n.
Clic
ck the [OK] buutton.
(4) Draw”
“D
(4) Draw.
Draw the Column Grid Line withh the new Y-a
axis.
Construction--119
Bu
uilding / Column Grid
d Line
4.
4 Specify gen
neral purpose lines and draw Column Grid Line (Mouse Selectio
on)
Command toolbar
(2) “Se
elect X-axis”
(2) Selec
ct general purrpose line thaat will becom me the X-axis.
Specify general purrpose line (2).
Lines after the 2nd line must be pparallel to the 1st line.
Construction -120
Buuilding / Co
olumn Grid
d Line
(6) “Drraw”
(6) Draw.
Draww the Column
n Grid Line ussing the specified line as th
he
axis.
5.
5 Draw a sin
ngle Column Grid
G Line
Command toolbar
Construction--121
Bu
uilding / Column Grid
d Line
6.
6 Operation e
example of drawing axis symbols
s and dimensions on a paper la
ayout
<Command
< ttoolbar>
(1) Spec
cify the detec
ction start po
oint
(1) Specify
y the detection start point..
Specify the detection start position (1).
matically get the
* Autom e details and sstyle for the sp
pecified axis.
(3) Spe
ecify layout po
oints
(3) y the layout points.
Specify p
Specify “symbol and dimension” layyout position (3).
(4) Spe
ecify end poin
nt
(4) y the end point.
Specify
Specify
y the leader lin
ne end positionn (4).
Construction -122
Building / Co
olumn
Colu
umn
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Column [P]..
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Draw
w Method Select draw
w method from m “Single” – “Batch” – “Colum
mn Batch".
(1) Single
Place a column at an arbitrary locaation.
(2) Batch
olumns all at o
Place co once on Colum mn Grid Line intersection pooints.
(3) Column Batch
Place H bars all at on
nce on center of
o columns.
Up to 10
00 columns grrid lines can be used for battch placementt.
3.
3 Trimming Set whether to trim wall liines or column
n lines.
(1) If wall/co
olumn checkbo oxes are not checked:
c
(2) If wall ch
heckbox is che
ecked, column
n checkbox is not checked:
olumn checkbo
(1) If wall/co oxes are chec
cked:
Construction--123
Bu
uilding / Co
olumn
4.
4 Center Rea
alignment Set whether to use cente er realignment settings value
es.
(1) If checkeed:
Draw us sing center reaalignment valu
ues.
(2) If not che
ecked:
Draw wiithout using ce enter realignm
ment values.
5.
5 Direction sspecification Select whetther or not to sspecify the dra
aw direction.
(1) If the che
eck box is che
ecked
When specify the draw w position / ce
enter realignm
ment, followed by the column
n direction.
eck box is uncchecked
(2) If the che
When specify the draw w position / ce
enter realignm
ment,Draw a coolumn center.
6.
6 Input Angle
e Input an angle.
7.
7 Angle Reference Button Select the angle
a referencce method.
8 Surface Setting
8. Open the su
urface settingss dialog to con
nfigure surface
e settings.
Comman
nd Dialog Description
D n
1. Select
S Shape Click the shap
C pe selection a
area to open th
he column typpe selection d ialog and sele
ect the drawinng type.
S
Select from “R
Round Column n” “H-beam 1--line” “H-beam
m 2-lines” “Crooss H-beam 1--line” “Cross H-beam
H
2
2-lines".
Construction -124
Building / Co
olumn
2.
2 Select Draw
wing Method Select the drawing
d methood.
(1) Mouse Selection
S
Draw by
y selecting the
e start/end point coordinates
s. This is typiccally used for tracing.
t
(2) Input Values
y inputting the shape size.
Draw by
3.
3 Input Drawiing Size Input the drrawing size.
Set the heigght/width/depth
h, depending ono the shape.
For “H-beam m 2-lines" conffigure according to the following conditionns.
(1) H-beam width > depth h
(2) H-beam height > width hx2
4.
4 Set Drawing
g Direction ection of drawiing.
Set the dire
Center R
Realignmen
nt Input Dia
alog Descriiption
1. Input Cente
er Realignmen
nt Width In
nput the width of center realignment. Set this for single use.
Column
C is drawwn at the speccified location after reflectingg the realignm
ment width amo
ount.
nput the verticcal realignment width.
In
In
nput the horizo ontal realignm
ment width.
Construction--125
Bu
uilding / Co
olumn
1. Input Cente
er Realignmen
nt Width In
nput the width of center realignment. For batch drawingg, this is the outermost column.
In
nput H1 top sidde width.
In
nput H2 bottomm side width.
In
nput W1 left siide width.
nput W2 right side width.
In
Height In
nformation Dialog Des
scription
m Side Level
1. Input Bottom Input the bo
ottom side leve
el for setting 3-D
3 height info
ormation.
2.
2 Input Colum
mn Height Input the co
olumn height ffrom the bottom
m side level fo
or setting 3-D height informa
ation.
Contextu
ual Menu Description
D
Construction -126
Building / Co
olumn
Precautio
ons
2.
2 Center Rea
alignment The column n center realig gnment size is the distanc ce from the ccorner of outs side column within
w a
rectangular batch selecte ed area.
A center rea alignment sizee of ‘0’ means s the corner off the outside ccolumn is at the Column Grid Line
intersection point for
It is not poss
sible to draw iinside this are
ea.
Construction--127
Bu
uilding / Co
olumn
It is also pos
ssible to set a center realign
nment point sm
maller than thee column size
e.
3.
3 Drawing An
ngle Column/H-bbeam angle is corrected to between
b -180.0° ~ 180.0°.
For round co
olumns, this w
will be correcte
ed by 0.0°.
4.
4 Round Colu
umns No trimming
g is performed
d for round columns and coluumns/walls.
To perform trimming, use the Lengthenn or Erase by Part
P commandds.
5.
5 Mouse Sele
ection It is possiblle to draw sq uare column//round column
n length/heighht/diameter siz
zes to the ma
aximum
values.
v
Usage Ex
xample
Command toolbar
(1) “Se
et Drawing Method”
M
(1) Channge the drawiing method to “Mouse Se election.”
For dra
awing method,, select “Mous
se Selection.”
Construction -128
Building / Co
olumn
(2) “Sp
pecify Drawin
ng Location”
(2) Speccify the drawiing location.
Spec
cify the squaree column draw wing start posittion (1)
and drawing
d end pposition (2) (op
pposite cornerr).
(3) “Draw”
(3) Draw
w.
Draw
w the square co
column in the specified
s locattion.
2.
2 Draw a rou
und column using
u Single Draw
D
Command
d toolbar
(3) “Draw”
(3) Draw
w.
Draw
w the round coolumn in the sp
pecified locatio
on.
Construction--129
Bu
uilding / Co
olumn
3.
3 Draw a squ
uare column using Single Draw
Command
d toolbar
(3) “Draw”
(3) Draww.
Draww the column inn the drawing area after con
nsidering
the amount
a of Collumn Grid Line
e intersection point
realig
gnment.
Construction -130
Building / Co
olumn
Command toolbar
(4) “Draw”
(4) Draww.
Draww the H-beam 1-line in the drawing area after
a
considering
the amount
a of Coluumn Grid Line
e intersection point
p
realig
gnment.
Construction--131
Bu
uilding / Co
olumn
5.
5 Draw an H--beam 2-lines
s using Single Draw
d toolbar
Command
(3) “Draw”
(3) Draw.
Draw H-beam 2-linees centered ov
ver the column
ns in the
drawing area.
Construction -132
Building / Wall
Wall
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Wall [W].
2.
2 Icon Menu
n shown to the
Click the icon e left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Draw
wing Method Select drawwing method frrom “Exterior Wall”
W “Partition
n” “Hanging P
Partition Wall”.
(1) Exterior wall
Draw an n exterior wall at an arbitrary
y location.
(2) Partition
Draw a partition at ann arbitrary locaation.
(3) Hanging partition wall
Draw a hanging partittion wall at an arbitrary location.
3.
3 Drawing Ba
ase Line Set up Drawwing Base Line e.
(1) Center line
Draw wiithout using ceenter realignm
ment values.
(2) Surface
Draw wiith center real ignment value
e set to half the distance of w wall thickness
s.
(3) Center re
ealignment
Draw us sing center rea
alignment valu
ues. It is possiible to input thhe center realignment size.
4.
4 Set Angle C
Correction Configure angle
a correctio
on.
(1) If checkeed:
Performm angle correctction. Correctio on is normally performed in 45 degree inc crements baseed on 0
degrees s.
If a base
e line is speciffied, correction is performedd in 45 degreee increments from
f this base line.
(2) If not che
ecked:
Do not perform
p angle correction.
5.
5 Trimming Set whether to trim wall liines or column
n lines.
olumn checkbo
(1) If wall/co oxes are not checked:
c
(2) If wall ch
heckbox is che
ecked, column
n checkbox is not checked:
Construction--133
Bu
uilding / Wa
all
(3) If column
n checkbox is checked, wall checkbox is not checked:
olumn checkbo
(4) If wall/co oxes are chec
cked:
6.
6 Surface Setting Button Open the su
urface settingss dialog to con
nfigure surface
e settings.
7.
7 Drawing Ra
adius Setting Set the arc radius for an arc wall.
(1) If checkeed:
It is possible to set the A wall is drawn using the cconfigured value.
e arc radius. Arc
(2) If not cheecked:
Draw wiithout using th he arc radius value.
v
8.
8 Select Arc D
Drawing Meth
hod Set
S arc drawing g method to “S end points” or “Specify cente
Specify start-e er point”.
(1) Specify start-end
s poin ts
The order will be set a
as specify start-end points, specify drawinng direction.
(2) Specify center
c point
The order will be set a
as specify cen
nter point, specify start-end points.
Comman
nd Dialog Description
D n
1.
1 Select Shap
pe Click the sh
hape selection n area to open
n the wall type selection diialog and sele
ect the drawin
ng type.
Select “Wall” or “Arc wall””.
Construction -134
Building / Wall
2.
2 Select Draw
wing Method Select the drawing
d methood.
(1) Mouse Selection
S
Draw by
y selecting the
e start/end point coordinates
s. This is typiccally used for tracing.
t
(2) Input Values
Draw by
y inputting the shape size.
3.
3 Input Wall T
Thickness Size Input the wall
w thickness size.
4.
4 Wall Centerrline Drawing Settings Set
S whether to draw a wall centerline.
c
(1) If checked:
e down the ce
Draw a wall centerline enter of the wa
all width.
(2) If not checked:
Do not draw
d a wall ceenterline.
Height In
nformation Dialog Des
scription
m Side Level
1. Input Bottom Input the bo
ottom side leve
el for setting 3-D
3 height info
ormation.
2.
2 Input Wall H
Height Input the wa
all height from
m the bottom side level for se
etting 3-D heigght information.
Contextu
ual Menu Description
D
1.
1 Contextual Menu Describes th
he context-sen
nsitive informa
ation.
Construction--135
Bu
uilding / Wa
all
Precautio
ons
2.
2 Finishing D
Draw finishing lines using the
e [Finishing] command.
c
3.
3 Materials/S
Structure Liness
U the [Buildinging Frame Display] comm
Use mand to draw
w materials (bloocks/C/timberr columns/halff timber
coolumns) and Buildinging
B line
es.
4.
4 Arc Walls The shape drawn changes d
T depending on the selected line. The arc line is lengthe
ened or shrun
nk up to
th
he point of the selected line..
If a column itself is seleccted, arc line will be lengthened or shrunnk up to the line representting the
column shappe.
5.
5 Mouse Sele
ection It is possible to draw straightt/arc wall thick
kness sizes to the maximum m values.
It is not possiblle to draw an arc wall if thee secondary sppecified arc haas the same center
c as the primary
sppecified arc.
Construction -136
Building / Wall
Usage Ex
xample
1.
1 Draw an ex
xternal wall
d toolbar>
<Command
(4) “Sp
pecify Centerr Realignmen
nt Direction”
(4) Speciffy the center realignment direction.
Click th
he desired direection location
n (3).
(5) “Sp
pecify End Po
oint”
(5) Draww the wall. Coontinue to spe ecify the end position.
Continue clicking inn order at end
d points (4)~(8
8).
nd (8) are the same point.
(7) an
t drawing opperation by clicking twice att the same
End the
point.
Construction--137
Bu
uilding / Wa
all
(6) “Draw”
(6) Draw the
t wall.
Wall is drawn reflectting trimming/c
center realignm
ment.
2.
2 Draw an arrc wall
<Command
d toolbar>
(3) onfirm”
“Co
(3) Conffirm the line w within the staart point detection area.
If the
ere is a straighht wall, column
n or line in the start point
detecction area, sellect the objectt that will be ussed to
perfoorm connectionn processing.
For yes,
y press the Enter key or left-click
l the mouse,
m
for No press the ES SC key or righ
ht-click the mo ouse.
ne selected, trrimming/correction will not be
If non b performed.
(4) “Sp
pecify End Po
oint”
(4) Speciffy the wall ennd point.
Click at end point (3)) at the column edge.
After clicking, show tthe rubber band for arc wall.
Construction -138
Building / Wall
(5) “Sp
pecify Pass-T
Through Poin
nt”
(5) Speciffy the location n of the wall pass-through
h point.
he wall pass-thhrough point (4).
Click th (
w”
(7) “Draw
(7) Draw thee arc wall.
Arc wall is drawn refleccting trimming
g/center realign
nment.
3.
3 Specify an arbitrary loc
cation and dra
aw a partition
n
<Command toolbar>
(1) “Se
et Drawing Method”
M
(1) Channge the drawiing method to “Mouse Se election.”
For drawing
d methood, select “Mouse Selection.”
Construction--139
Bu
uilding / Wa
all
(3) “Draw”
(3) Draw
w.
Draw
w the wall in thhe specified loc
cation.
4.
4 Specify arc
c objects and
d draw exterio
or wall
<Command
d toolbar>
(3) “Draw”
(3) Draw
w.
Draw
w the arc wall iin the specified location.
Construction -140
Building / Found
dation
Bea
am
Function
n Overview
Draw beams w
without hauncch/flat haunch//section hauncch/flat drop/se
ection drop/ H--beam (1-line/22-lines).
Draw beam size text.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Beam [B].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
* For drawing
g beam size text
t
1. Pulldown MMenu
Click [B
Building (K)] [Beam Anno
otationt [B].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Processing Type Select from “New Drawing
g” or “Size Dra
awing”.
3.
3 Select Leve
el Base Select from “View from Be elow” or “View
w from Above.”
(1) View from
m below
When selecting to view w from below, input the floor height.
Floor heigght will be addded to the leve
el.
(2) View from
m above
When selecting to view w from below, floor
f height ca
annot be input..
Floor heigght will not be added to the level.
4.
4 Input Floor Height Input the flo
oor height.
5.
5 Set Drawing
g Base Set the basse for drawing..
(1) If checke
ed:
Draw with h edge as the base.
Construction--141
Building / Fo
oundation
6.
6 Set Angle C
Correction Configure angle
a correctio
on.
(1) If checkeed:
Perform angle
a correctio
on. Correctionn is normally performed
p in 445 degree inc
crements base ed on 0
degrees.
If a base line
l is specifie
ed, correction is performed in 45 degree inncrements fro
om this base line.
(2) If not che
ecked:
Do not pe erform angle ccorrection.
7.
7 Simultaneou
us text draw settings
s Makee settings for d
drawing beam
m size text at th
he same time as the beam.
(1) If the cheeck box is cheecked
Draw beam size text at the same time
t as the beam.
(2) If the cheeck box is uncchecked
Only drraw the beam..
8.
8 Beam No. d
drawing Make
e settings for beam
b numberr text strings.
9.
9 Sequence b
button Open the dialog box
x for setting th
he draw order and draw/don't draw for item
ms subject to beam size texxt.
* For drawing
g beam size text
t
e Processing Type
12. Beam Size For
F beam size processing, select
s from “Drraw” “Edit” “Deelete”.
“D
Draw”: Draw n new beam size e.
“E
Edit”: Re-edit a
an already dra
awn beam size.
“D
Delete”: Deletee an already drawn
d beam size.
s
14. Drawing L
Location For drawingg location, sele
ect from “Centtering” “Arbitra
ary” “Slide”.
(1) “Centerin
ng”
(2) “Arbitrary
y”
(3) “Slide”
16. Ordering B
Button Open the dialog for settin g drawing ord
der and whethe
er to draw beaam size text items.
17. Details Bu
utton Open the dialog for config
guring beam size
s text prope
erties.
Construction -142
Building / Found
dation
Comman
nd Dialog Description
D n
1.
1 Select Shap
pe Click the shape selection a he beam type selection dialoog and select the drawing tyype.
area to open th
Select from “no haunch” “fflat haunch” “s
section haunch” “flat drop” ““section drop”” “H-beam 1-liine” “H-
beam 2-lines””.
To make a selection,
s clickk the shape selection area and then clicck [OK], or do
ouble-click the
e shape
selection area
a.
2.
2 Select Draw
wing Method Select the dra
awing method d.
(1) Mouse Se election
Draw by selecting
s the sstart/end pointt coordinates. Mainly used fo
for traces.
(2) Input Valu
ues
Construction--143
Building / Fo
oundation
3.
3 Settingtart/E
End Point Sam
me Size Set
S whether sta art point/end point
p sizes aree the same or not.
(1)
( If checked::
Start point and end point sizes will be the same.
Both will usse the size of the start pointt.
(2)
( If not checkked:
Start point and end point sizes will be the different.
Start point and end point will use each h of their correesponding size
es.
4.
4 Input Start Point/End Point Size In
nput the sizes for start pointt/end point.
5.
5 Detailed Sh
hape Dimensio
on Method Button
Open the be
eam attributess dialog and co
onfigure beam
m attributes.
m Width
1. Input Beam eam starting p
Input flat be point width (W11) and end point width (W2)).
Refer to thee picture show
wn in the dialog
g for the applic
cable area.
3.
3 Input End p
point left hauncch/drop
Flat haunch/flat drop inpu put end point left haunch/droop width (WE1) and length (HE1).
ut possible, inp
4.
4 Input Start point right hau
unch/drop
Flat haunch
h/flat drop inp oint right haunnch/drop widtth (WS2) and length
put possible, input start po
(HS2).
5.
5 Input End p
point right haunch/drop
Flat haunch//flat drop inputt possible, input end point right haunch/drrop width (WE
E2) and length
h (HE2).
6.
6 Input Beam
m depth Input sectio
on start point b
beam depth (H
H1) and end po
oint beam deppth (H2).
7.
7 Input Beam
m level Input start point
p beam top
p level (LS) an
nd end point beam
b top levell (LE).
Construction -144
Building / Found
dation
8.
8 Input Start point haunch/drop
Section hau
unch/section d
drop input pos
ssible, input start
s point righht haunch/dro
op height (WS
S3) and
length (HS3
3).
9.
9 Input End p
point haunch/d
drop
Section hau
unch/section d
drop input possible, input end
e point righht haunch/dro
op height (WE
E3) and
length (HE3
3).
10. Reference
e Button Specify an already
a drawn
n beam and ge
et attributes.
1. Drawing Orrder/Setting Set order off and whether to draw beamm size text.
Item: Used for beam num mber, beam sizze, beam leve
el, floor height..
Change ord der: Select item
m (row) and specify up/dow
wn button in 2.
Draw Settinng: Check dessired items. Ch
hecked items will
w be drawn.
2.
2 Up/Down B
Buttons Change the order of the sselected item.
Construction--145
Building / Fo
oundation
nthesis
1. Draw Paren Set whetherr to add paren
nthesis symbols to size text, level text, flooor height text.
Symbols Items are drawn with pare
rentheses whe
en checked.
2.
2 Level Text Set the draw
wing type for le
evel text.
(1) Top leve
el
Draw the distance fromm floor height to
o beam top ed
dge.
(2) Bottom level
Draw the distance fromm floor to beam
m bottom edgee.
3.
3 Beam Offse
et for Slide Set the bea
am offset for d
distance to fro
om flat drawing beam edgee line to text when
w drawing text on
beam outsid
de when draw wing location is
s set to “Slide".
4.
4 Number of text lines Set the num
mber of beam ssize text stringg lines.
Draws multiple lines (2-lin ed, one line if not checked.
ness) if checke
5.
5 Spacing Set the disttance betwee n text string as
a line spacin
ng for when thhe beam size
e text string iss set to
multiple line
es.
6.
6 Level Base Set the leve
el base text strring before floo
or height text.
If checked, level base texxt string will be
e drawn.
7.
7 Print Toggle
e Setting Set printing status for prin
nt beam size text when draw wing in real tim
me.
(1) If checkeed:
Beam sizee text drawn inn real time will be printed.
(2) If not che
ecked:
Beam sizee text drawn inn real time will not be printe
ed.
Setting can be changed a after drawing from
f the “Edit Print commannd.
Print indicattor color can be set from the palette available
a in thhe Set up Opperation Enviro
onment
command.
ext is drawn orr edited for a drawn
If the size te d beam, it becomes suubject to printin
ng.
Construction -146
Building / Found
dation
Contextual
C l Menu Des
scription
Precautio
ons
WE2: End po
oint right hauncch/drop width
HE2: End poiint right hauncch/drop length
h
This example is forr drawing withh 0<start point beam top level<end point bbeam top leve
el.
(Left is “view from below” – rightt is “view from above”)
Construction -148
Building / Found
dation
2.
2 Beam Style
e Text style can be in ndividually sett for beam sha
ape flat/section/beam size te
text styles.
(It is not possible to
o check LT prroducts for secction shapes)
Construction--149
Building / Fo
oundation
3.
3 Size for Sizze Drawings The larger of
o the start poi nt/end point beam
b size will be used.
Level size is
s drawn insidee ( ).
□□□×□□
□□(□□□∼□□□))
↓ ↓ ↓ ↓
Bea
am size Start point End pooint
Bea am top Beamm top
Levvel Level
5.
5 Beam size text Beam size text
t may be co omposed of a mix of full-wid dth and half-wiidth characterrs.
style To draw full-width/half-wid
dth text, check the “full/half width mixed ddisplay” checkkbox on the te
ext style
alog.
selection dia
Clear the chheckbox to draaw all text as full
f width charracters.
6.
6 Mouse Sele
ection e to draw beam
It is possible m width sizes to the maximu um values.
It is not posssible to perfo
orm mouse se election of “fla
at haunch” “seection haunch
h” “flat drop” “section
“
drop”.
Construction -150
Building / Found
dation
Usage Ex
xample
1. Draw a bea
am without haunch
< Comma
and toolbar >
(1) ettingize”
“Se
(1) Input sizes using the beam sh hape dimension dialog.
Click (1) and selecct no haunch.
Click (2) and set atttributes.
Beamm width start ppoint size 400
Beamm depth start ppoint size 500
Beamm top level 0
(5) “Draw”
Construction--151
Building / Fo
oundation
< Comma
and toolbar >
(1) “Se
ettingize”
(1) Input sizes using the beam sh hape dimension dialog.
Click (1) and selecct flat haunch.
Click (2) and set atttributes.
Beamm width start ppoint size 700
Beamm depth start point size 5000
Beamm top level 0
Click the
e detailed shaape dimension ns button (3) and open
the beam attributes innput dialog.
Set beam attributes aas follows.
Start po
oint left hauncch/drop width 300
Start po
oint left hauncch/drop length 200
Set the remaining hauunch/drop wid dth and haunch/drop
length values
v to 0.
Construction -152
Building / Found
dation
(2) “Sp
pecify Drawin
ng Starting Location”
(2) cify the locatioon for starting the
Spec t drawing.
cify the beam ddrawing start location (4).
Spec
Show
w the draw beaam shape rub bber band.
(5) “Draw”
(5) Draw
w the beam.
Draw
w a beam with width of 700 in
i the direction
n as specified
base
ed from the sidde.
Construction--153
Building / Fo
oundation
3.
3 Draw a bea
am with sectiion drop
< Comma
and toolbar >
Click the
e detailed shaape dimensionns button (3) and open
the beam attributes innput dialog.
Set beam attributes aas follows.
Haunch h/drop height 300
Haunch h/drop length 300
Construction -154
Building / Found
dation
(3) “Sp
pecify Drawin
ng Ending Lo
ocation”
(3) Speccify the locatioon for ending th
he drawing.
Click drawing end location (5).
(5) “Draw”
(5) Draw
w.
Draw
w a beam with width of 700 in
i the direction
n as specified
base
ed from the sidde.
4.
4 Specify arb
bitrary locatio
on and draw H-beam
H 1-line
e
< Comma
and toolbar >
Construction--155
Building / Fo
oundation
(2) “Sp
pecify Drawin
ng Starting Location”
(2) cify the locatioon for starting the
Spec t drawing.
Spec
cify drawing sttart location (33).
(4) “Draw”
(4) Draw
w.
Draw
w the beam in tthe specified location.
am with beam
5. Draw a bea m size text
< Comma
and toolbar >
(2) “Draw”
(3) Beam
m size text is drawn.
Beam
m size text is ddrawn.
Construction -156
Building / Found
dation
Stair
S
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Stair [S].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Symbol sele
ection Select a sta
air symbol draw
wing method. (Cannot be selected for “sppiral stairs”)
(1) Auto
Draw thhe symbol at the specified symbol location (Figure A below). Set the symbol angle
a to
[Detailed Shape Dime ension].
(2) Arbitrary
y
Draw the symbol at aan angle to con
nnect to specified symbol 1 (B in the belo
ow figure) and 2 (C in
the beloow figure).
(3) None
Do not draw
d symbols .
3.
3 Select Hidd
den Line Select the hidden
h line ha ndling method
d.
(1) Delete
Stair line
es below the ssymbol (D in the below figurre) as specifieed by the mouse are deleted
d.
For spirral stairs, the area other than [Draw Arrea] as set inn [Detailed Sh hape Dimensions] is
deleted..
Construction--157
Building / Fo
oundation
(2) Dashed
Stair line
es for the side
e specified by the mouse (D
D in the figure bbelow) are dra
awn as dashed lines.
For spirral stairs, the area other than [Draw Arrea] as set inn [Detailed Sh hape Dimensions] is
shown as a dashed line es.
4.
4 Select Arrow Select the drawing
d methood for stair arrrows.
(1) Point Se
election (only aavailable for “ddog-leg stairs””)
Stair retturns at the po
oint arbitrarily specified by UP/DN
U arrow ssymbol.
(1) Line Seleection (only avvailable for “doog-leg stairs”)
Stair retturns at the ccenter of the specified land ding between the wall line and stairs fo
or when
UP/DN arrow symbol is “specify arrrow direction”..
(3) None
Do not draw
d UP/DN a
arrow symbols
s.
Construction -158
Building / Found
dation
F dog-leg stairs:
For
5.
5 Set Height B
Button O
Open the heig
ght settings dia
alog to configu
ure height.
Comman
nd Dialog Description
D n
1.
1 Select Shap
pe Click the shap
C pe selection a area to open the stair type e selection diaalog and sele
ect the drawin
ng type.
S
Select from “S
Straight stair” ““Dog-leg stair”” or “Spiral sta
air”.
To make a se
T election, click the shape se
election area and then clicck [OK], or do
ouble-click the
e shape
s
selection area.
Construction--159
Building / Fo
oundation
2.
2 No. of Stairss/Tread Settin
ngs Set
S whether to input the num mber of steps or o tread width..
( No. of Stairs
(1)
Input the number of ste eps in the stairrcase.
( Treads
(2)
cked: ( No. of stairs = No. of
If not chec o Treads + 1 = No. of Risess )
Straight stairs: -L / ( No
o. of stairs inpu
ut value - 1 )
Dog-leg stairs:
s -L / ( No
o. of stairs inpuut value - 1 )
I checked, sta
If airs will be dra
awn from to th
he tread dimen
nsion value off line 1 (1) spe
ecified location
n.
3.
3 Input Outerr Circle/Inner Circle
C Dimension
Input the draawing dimenssions for outer circle/inner circle of a spiraal staircase.
(1) Outer cirrcle dimensionn
Input th e outer circle of the spiral stair.
he radius of the
(2) Inner circ
cle dimensionn
Input th
he radius of the
e inner circle of the spiral sttair.
4.
4 Tread Setting Set whether to draw the spiral stair baased on the nu umber of surfaaces or based
d on the angle
e of one
surface.
(1) No. of Surface s
Input the
e number of ssurfaces in the
e spiral staircase.
(2) Angle
Input the e surface in the spiral stairca
e angle of one ase.
Advance
ed Settings Dialog Description
1. Input arrow
w/symbol Set the size and other parrameters for arrows/symbol
a ls for straight/ddog-leg stairs.
(1) Arrow lin
ne length
Input the
e length of the
e arrow line.
(2) Arrow cirrcle radius
Input the
e radius of the
e circle to be drawn
d from arrrow to edge off opposite end d.
Construction -160
Building / Found
dation
2.
2 Input arrow
w/symbol Set the size and other pa rameters for arrows/symbol
a ls for dog-leg sstairs.
(1) Arrow lin
ne length
Input thee length of the
e arrow line.
(2) Arrow cirrcle radius
Input thee radius of the
e circle to be drawn
d from arrrow to edge off opposite end
d.
(3) Symbol angle
a
Input thee angle to be used for draw wing symbols on
o stairs.
(4) Center divider
d width
Input thee protrusion wwidth for the sw
witchback center portion.
(5) Center divider
d length
Input thee protrusion le
ength for the switchback
s cen
nter portion.
3.
3 Input Outerr Circle/Inner Circle
C Dimension
Set the radius of the spiraal stair circularr portions. The
ese values maay also be cha
anged from witthin the
[Command dialog].
(1) Outer cirrcle dimensionn
Input the
e radius of the
e outer circle of
o the spiral stair.
(2) Inner circ
cle dimension n
Input the
e radius of the
e inner circle of
o the spiral stair.
4.
4 Input Drawiing Area/ Stairr Railing
Set the draw wing area/stairr railings of the spiral stair.
(1) Drawing range
Input thee angle of the area for draw wing the spiral staircase.
(2) Stair railing
Input thee width of railiings in the spiral staircase.
Height Se
ettings dia
alog Description
1. Input Heigh
ht Information Configure 3-D height info rmation.
(1) Rise
Input thee rise height fo
for each stair step.
s
(2) Bottom edge
e level (FL
L)
Input thee bottom edge e level.
(3) Landing size
Input thee size from staair to landing edge.
e
(4) No. of sp
piral steps
Input thee number of sspiral steps forr CG drawing use.
( No. of spiral steps = No. of Treads + 1 = No. of Rises )
This ma ay be different from the num mber of steps used
u for drawi ng treads in flat drawings.
Construction--161
Building / Fo
oundation
2.
2 CG Displayy Set CG disp
play propertiess for stair display parts.
Landing: Ap
pplies to stair l anding parts for
f all types.
Center: App
plies to center wall for dog-leeg stairs and center
c cylindeer for spiral sta
airs.
Contextu
ual Menu Description
D
Precautio
ons
2.
2 Spiral Stair setting Limita
ations
Please note g size setting limitations.
e the following
Be sure to configure
c draw
wings that are do not exceedd these condittions.
( Outer circle
(1) e dimension ≧ Inner circle dimension
d
( Outer circle
(2) e dimension – Inner circle dimension
d > Railing
R width
Usage Ex
xample
<Command
< to
oolbar>
Construction -162
Building / Found
dation
(2) “Sp
pecify Stair Drawing
D Loca
ation”
(2) Speccify the wall liines for locattion to draw the t stairs.
Speccify wall lines ((3),(4) adjacennt to the stair area.
a
The selected
s lines will be shownn in red. Input Y/N.
For Tread-None:
T
This display locatioon (3),(4) will become
b the sttair start point
and end point.
Construction--163
Building / Fo
oundation
2.
2 Draw a spiiral staircase
<Command
< to
oolbar>
Construction -164
Building / Found
dation
Foundatio
on
Function
n Overview
Draw Angle fo
oundations and H-beam foundations at th
he desired loca
ation.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Foundation [K].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Placement Correction Set whether to perform p placement corrrection.
Settings
S (1) If checked:
Draw affter performing
g placement correction.
(2) If not che
ecked:
Draw wiithout perform
ming placemennt correction.
3.
3 Input Angle
e In
nput an angle..
5.
5 Input Level Input the lev
vel.
Comman
nd Dialog Description
D n
1. Select Shap
pe Click the shape selection aarea to open the foundatio
on type selecttion dialog and select the drawing
d
type.
S
Select Angle foundatiion” “H-beam foundation 1” “H-beam founndation 2” “H-b
from “A beam foundation 3”.
Construction--165
Building / Fo
oundation
To make a se
T election, click the shape se
election area and then clicck [OK], or do
ouble-click the
e shape
s
selection area.
2.
2 Select Draw
wing Method Select the drawing
d metho od.
((1) Mouse Selection
Draw by selecting
s the sstart/end pointt coordinates. This is typicallly used for tra
acing.
( Input Value
(2) es
Draw by inputting the sshape size.
3.
3 Input Drawiing Size Input the drrawing size.
Depending on the shape, se
D et vertical/horiizontal/height/web thicknesss/flange thickn
ness.
F “H-beam foundation,"
For f co
onfigure according to the following condittions.
<H-beam foun
< ndation 1>
( Horizontal > Web thicckness
(1)
( Vertical > Flange thickkness x 2
(2)
<H-beam foun
< ndation 2/ H-be
eam foundatio
on 3>
( Vertical > Web thickne
(1) ess
( Height > Flange thickn
(2) ness x 2
Precautio
ons
1. Drawing Fo
oundations When place
ement correcttion is checke
ed, it is poss oundations from the
sible to draw 9 types of fo
secondary specification poiint.
2.
2 Drawing An
ngle Angle is corrrected to betw
ween -180.0° ~ 180.0°.
3.
3 Mouse Sele
ection It is possible
e to draw anglle foundation vertical/horizo
v ontal sizes to thhe maximum values.
Construction -166
Building / Found
dation
Usage Ex
xample
1. Draw an an
ngle foundatiion without placement
p corrrection
< Comma
and toolbar >
(3) “Draw”
(3) Draw
w.
Draw
w the angle fouundation in the
e specified loccation.
2.
2 Draw an an
ngle foundatiion with place
ement correc
ction
< Command
d toolbar >
Construction--167
Building / Fo
oundation
(2) “Sp
pecify Drawin
ng Location”
(2) Spec
cify the drawiing location.
Spec
cify the angle ffoundation dra
awing location
n (3).
(4) “Draw”
(4) Draw
w.
Draw
w the angle fouundation in the
e specified loccation.
3.
3 Draw an H--beam foundation 1 using
g mouse selec
ction.
< Command
d toolbar >
Construction -168
Building / Found
dation
(3) “Sp
pecify Drawin
ng End Locattion”
(3) Spec
cify the locatiion for ending the drawing g.
Spec
cify the H-beamm foundation 1 drawing end d location (4)
(opp
posite corner fr
from starting drawing
d locatio
on (3)).
(4) “Draw”
(4) Draw
w.
Draw
w the H-beam ffoundation 1 at
a the specified location.
Construction--169
Bu
uilding / Sla
ab
Slab
b
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Slab [S].
2.
2 Icon Menu
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Draw
w Method Select draw
w method from m “Border” – “P
Point Sequenc ce” – “Specify Center".
(1) Border
oor in a rectan
Draw flo ngular area as specified by two
t opposing points.
(2) Point Se
equence
Draw flo
oor by using mmultiple points to specify a closed area.
(3) Specify Center
C
Draw flo
oor into an arb
bitrary closed area
a surroundded by drawingg elements.
3.
3 Drawing Le
evel Set the draw
wing level.
(1) Flat
Draw a flat floor. Thiss option available only for “point sequencee" and “specify
y center”.
(2) Tilted
Draw a sectional tilted d floor.
4.
4 Slope direcction Specify the direction of sllope when dra
awing tilted.
5.
5 Level Set the starrt side, end sid
de FL (floor lev
vel).
6.Print
6 configu
uration Set up whether to print th
he Slab eleme
ent of the plane
e.
Comman
nd Dialog Description
D n
Construction -170
Building / Slab
Contextu
ual Menu Description
D
1.
1 Contextual Menu Describes th
he context-sen
nsitive informa
ation.
(2) Elevation
n standard po osition
- Top side
he level positio
Set th on to the top side
s of the floo
or shape.
- Undersside
Set th
he level positio
on to the botto
om side of the floor shape.
Precautio
ons
1. Trimming No trimm
ming is perform
med between ffloors and coluumns/walls.
D
Draw using “point sequence
e” for areas that require trim
mming.
Usage Ex
xample
1.
1 Use borderr to draw a flo
oor
(1) “In
nput Size”
(1) Input the
t floor thickkness value.
Thickness 200
Construction--171
Bu
uilding / Sla
ab
(2) “Sp
pecify Start Point”
P
(2) Speciffy the floor sttarting point.
Click at start point (22) for the floor.
(3) “Sp
pecify End Po
oint”
(3) Specifyy the floor endd point.
Show rubber
r band frrom start point (1) to the
cursor position.
Click at end point (2)) for the floor.
(4) “Draw”
(4) After confirming the area, draw the
e floor.
(2) “Draw”
(3) w the Slab.
Draw
Construction -172
Building / Slab
3.
3 Use point s
sequence to draw
d a floor
(3) onfirm”
“Co
(3) Conffirm the shap pe.
After confirming, ppress the “Yes (Y)” button.
(4) “Draw”
(4) w.
Draw
The floor
f is drawn as a closed shape in the sp
pecified area.
Construction--173
Building / Fiixtures
Ceiling
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Ceiling
[C].
2.
2 Icon Menu
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Draw
w Method Select draw
w method from m “Border” – “PPoint Sequenc ce” – “Specify Center".
(1) Border
Draw ceeiling in a recta
angular area as
a specified by y two opposinng points.
(2) Point Se
equence
Draw ceeiling by usingg multiple points to specify a closed area.
(3) Specify Center
C
Draw ceeiling into an a
arbitrary closed
d area surroun nded by drawiing elements.
3.
3 Drawing Le
evel Set the draw
wing level.
(1) Flat
Draw a flat ceiling. Th
his option avaiilable only for “point sequennce" and “spec
cify center”.
(2) Tilted
Draw a sectional tilted
d ceiling.
4.
4 Slope direcction Specify the direction of sllope when dra
awing tilted.
5.
5 Level Set the starrt side, end sid
de FL (floor lev
vel).
6.
6 Print configuration Set up whe he elements of the ceiling plane.
ether to print th
Comman
nd Dialog Description
D n
Construction -174
Bu
uilding / Fixxtures
Contextu
ual Menu Description
D
1.
1 Contextual Menu Describes th
he context-sen
nsitive informa
ation.
(2) Elevation
n standard po osition
- Top side
he level positio
Set th on to the top side
s of the floo
or shape.
- Undersside
Set th
he level positio
on to the botto
om side of the floor shape.
Precautio
ons
1.
1 Trimming No trimming is
N s performed be
etween ceiling gs and column ns/walls.
D
Draw using “point sequence
e” for areas that require trim
mming.
Usage Ex
xample
Please
P refer to
o the Slab com
mmand.
Construction--175
Building / Fiixtures
Roo
of
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Roof [R].
2.
2 Icon Menu
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Draw
w Method Select draw
w method from m “Border” – “P Point Sequenc ce” – “Specify Center".
(1) Border
Draw rooof in a rectang
gular area as specified by tw wo opposing ppoints.
(2) Point Se
equence
Draw rooof by using mmultiple points to
t specify a closed area.
(3) Specify Center
C
Draw rooof into an arbiitrary closed area
a surrounde ed by drawingg elements.
3.
3 Drawing Le
evel Set the draw
wing level.
(1) Flat
Draw a flat roof. This option availab
ble only for “po
oint sequencee" and “specify
y center”.
(2) Tilted
Draw a sectional tilted
d roof.
4.
4 Slope direcction Specify the direction of sllope when dra
awing tilted.
5.
5 Level Set the starrt side, end sid
de FL (floor lev
vel).
6. Print config
guration Set up whe
ether to print th
he elements of
o the roof plan
ne.
Comman
nd Dialog Description
D n
Construction -176
Bu
uilding / Fixxtures
Contextu
ual Menu Description
D
1.
1 Contextual Menu Describes th
he context-sen
nsitive informa
ation.
(2) Elevation
n standard po osition
- Top side
Set th
he level positio
on to the top side
s of the floo
or shape.
- Undersside
Set th
he level positio
on to the botto
om side of the floor shape.
Precautio
ons
1.
1 Trimming No trimming is
N s performed be
etween roofs and columns/w walls.
Draw using “point sequencce” for areas th
hat require trim
mming.
Usage Ex
xample
Please
P refer to
o the Slab com
mmand.
Construction--177
Building / Fiixtures
Fixtures
Function
n Overview
Draw doors/w
windows into walls
w or arc walls.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Fixtures [D].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Input Quantity Input the nu
umber of fixturres to draw.
3.
3 Input Spacing For drawing
g multiple fixtu
ures, input the fixture spacin
ng.
4.
4 Select Casiing Shape Select casin
ng shape from
m “no casing” “flush
“ casing” “protruding caasing”.
(1) No casin
ng
Do not draw
d any casin
ng.
(2) Flush ca
asing
5.
5 Set Wall Lin
ne Deletion Configure wall
w line deletio on.
(1) If checkeed:
Wall line
es will be dele
eted when cas
sings are place
ed.
(2) If not che
ecked:
Wall line
es will not be d
deleted when casings are placed.
p
6.
6 Set Placem
ment Base Poin
nt Set the placcement base p
point.
(1) If checkeed:
Draw at “edge” when placing fixturees.
(2) If not che
ecked:
Draw at “center” when
n placing fixtures.
7.
7 Flat Shape Setting Button
n Open the fla
at shape settin
ngs dialog to configure
c flat shape
s settingss.
8.
8 Surface Shape Setting Button
Open the su urface shape ssettings dialogg to configure surface shapee settings.
(It is not pos
ssible to checkk Jr products for
f section sha apes)
Construction -178
Bu
uilding / Fixxtures
1. Select Shap
pe Click the shape selection area to open the door/wind
dow type selecction dialog an
nd select the drawing
d
type. Selectt from “door” “w
window” “othe
er”.
2.
2 Select Draw
wing Method Select the drawing
d methood.
(1) Mouse Selection
S
Draw by
y selecting the
e start/end point coordinates
s.
(2) Input Values
y inputting the shape size.
Draw by
3.
3 Input Drawiing Size Input the dra
awing size.
Construction--179
Building / Fiixtures
1. Door Cente
er Line Setting
g Set the doo or center line.
(1) If checkeed:
Draw a door center lin ne.
ecked:
(2) If not che
Do not draw
d a door ce enter line.
2.
2 Input Protru
usion Amount Input the prrotrusion amou
unt (when output) to use wh
hen drawing d oor center line
e.
3.
3 Reset Reset value
es to their defa
aults as they were
w immediattely after instaallation. (The same
s hereafter)
Construction -180
Bu
uilding / Fixxtures
2.
2 Input Door Center Line Protrusion
P Amoount
Input the amount of door center line protrusion (wh
hen output) to
o use when dra
awing doors.
3.
3 Input Door Grid Spacing
Input the door grid spacing (when ou
utputting draw
wing) to use wh
hen drawing doors.
Construction--181
Building / Fiixtures
1. Input Autom
matic Door inte
erval In
nput the autom
matic door spaacing (when ou
utput) distancee.
2. Input Autom
matic Door Offfset In
nput the autom
matic door offs
set (when outp
put).
Construction -182
Bu
uilding / Fixxtures
enter Line
1. Window Ce Set the wind dow center line
e.
Setting
S (1) If checkeed:
Draw a window cente er line.
(2) If not che
ecked:
Do not draw
d a window w center line.
2.
2 Input Protru
usion Amount Input the pro
otrusion amou
unt (when outp window center line.
put) to use when drawing w
Construction--183
Building / Fiixtures
2.
2 Settingliding
g Door Centerr Line
Set to dra aw a sliding do
oor center line
e.
(1) If checkeed:
Draw a sliding door ceenter line.
(2) If not che
ecked:
Do not draw
d a sliding door center line.
Construction -184
Bu
uilding / Fixxtures
3.
3 Input Protru
usion Amount Input the prrotrusion amou
unt (when output) to use wh
hen drawing slliding door center line.
1. Folding Doo
or Center Set the foldiing door cente
er line.
Line
L Setting (1) If checkeed:
Draw a folding door ccenter line.
ecked:
(2) If not che
Do not draw
d a folding
g door center line.
2.
2 Input Protru
usion Amount Input the pro
otrusion amou
unt (when outp
put) to use when drawing foolding door cen
nter line.
3.
3 Size Ratio Input the folding door size
e ratio (ratio co
ompared to drrawing size).
4.
4 Input Heigh
ht Ratio Input the folding door heig o compared to wall thicknesss).
ght ratio (ratio
5.
5 Drawing Tyype Set the draw
wing shape typ
pe.
6.
6 Angle Draw
wing Location Set angle sh
hape drawing to one or both
h sides.
Construction--185
Building / Fiixtures
1. Input Protru
usion Amount Input the pro
otrusion amou
unt (when outp
put) to use when drawing clooset center lin
ne.
2.
2 Input Triang
gular Input the clo
oset triangularr protrusion am
mount (when output).
o
Protrusion Ammount
3.
3 Input Triang
gular Input the clo
oset triangularr area offset (w
when output).
Area Offset
Construction -186
Bu
uilding / Fixxtures
2.
2 Size Ratio Input the ac
ccordion size rratio (ratio com
mpared to drawing size).
3.
3 Input Heigh
ht Ratio Input the ac
ccordion heigh
ht ratio (ratio compared
c to wall
w thickness)).
1. Input Heigh
ht Input the he uding casing (rratio comparedd to wall thickness).
eight of protrussion for protru
Construction--187
Building / Fiixtures
2.
2 Input Width
h Input the wiidth of protrussion for protrud
ding casing (ra
atio as compaared to wall thickness).
3.
3 Input Casin
ng Input the offfset for casing
g design for prrotruding casin
ng.
Design Offsett
4.
4 Input Casin
ng Input the prrotrusion width
h for protruding casing.
Protrusion Width
5.
5 Input Casin
ng Input the ov
verlapping wid
dth for protrudiing casing.
Overlapping W
Width
ng Thickness
1. Input Casin asing thicknesss for non-prottruding casing.
Input the ca
2.
2 Input Casin
ng Input the prrotrusion width
h for non-protrruding casing.
Protrusion Width
Construction -188
Bu
uilding / Fixxtures
ame Line
1. Window Fra Set to draw the window frrame for bay windows.
w
(1) If checkeed:
Do not draw
d window fframe line for bay window.
(2) If not che
ecked:
Draw wiindow frame liine for bay win
ndow.
2.
2 Settingize Set the bay window angle e and size.
(1) Side ang
gle
Settingid
de window an ngle.
(2) Set wind
dow protrusion n length
Set the length of protrrusion of frontt window from the wall.
(3) Bay winddow frame thicckness
Set the thickness of thhe bay window w to be drawnn.
(4) Offset
Set offset for both win
ndow sides.
3.
3 Window Tyype Set the type
e of shape to d draw for bay window.
w
(1) Straight
Select front
f window d drawing type from “fixed window”
w “2-panne sliding window” “4-pane sliding
window””.
(2) Side
Select leeft and right s ide window drrawing type fro
om “no window w” “fixed window” “hinged window”.
w
(3) Wall top
Set bay window wall p portion drawin
ng type from “nno window” “22-pane sliding window”.
Construction--189
Building / Fiixtures
1. Window Fra
ame Line Set to draw the window frrame for bay windows.
w
(1) If checkeed:
Do not draw
d window fframe line for bay window.
(2) If not che
ecked:
Draw wiindow frame liine for bay win
ndow.
2.
2 Settingize Set the bay window angle e and size.
(1) Side Anggle 1
Settingid
de window an ngle.
(2) Side Anggle 2
Settingid
de window an ngle.
(3) Bay winddow frame thicckness
Set the thickness of th
he bay window
w to be drawn
n.
(4) Offset
Set offset for both win
ndow sides.
3.
3 Window Tyype Set the typee of shape to ddraw for bay window
w side windows.
Select left and right side w
window drawinng type from “no window” “ffixed window” “hinged windo
ow”.
Construction -190
Bu
uilding / Fixxtures
d Window
1. Side Hinged Set the size of the side hi nged window.
(1) Size ratio
o
Size Raatio Inpu
ut the size ratio
o of the openin
ng (ratio comppared to drawing size).
(2) Openingg angle
Set the window angle e.
2.
2 Top Hinged
d Window Set the size of the top hin
nged window.
(1) Size ratio
o
Size Raatio Inpuut the size rattio of both sid
des of the winndow (ratio compared
c to drawing
d
size).
(2) Window tilt width
Set the window tilt widdth (ratio compared to wall thickness).
Construction--191
Building / Fiixtures
Construction -192
Bu
uilding / Fixxtures
Construction--193
Building / Fiixtures
Surface D
Dialog Des
scription (s
section sha
ape verifica
ation not po
ossible forr LT produc
cts)
Construction -194
Bu
uilding / Fixxtures
2.
2 Input Fixturre Height Input the he
eight from mou
unting height to
t fixture height.
Construction--195
Building / Fiixtures
Precautio
ons
1. Drawing Lo
ocation The followin
ng table show
ws a list of whic
ch fixtures can
n be placed onn which wall ty
ypes. (○: posssible, ×:
not possible
e)
2.
2 Finishing When placing fixtures on n walls for which finishing lines have bbeen drawn, fixture
f shape will be
drawn to the
e thickness of the wall including finishing thickness.
3.
3 General-purpose Lines It is possible
e to draw fixtu
ures on objectts other than straight/arc
s waalls, such as general-purpos
g se lines
and generall purpose arcss.
The followinng drawing limmitations apply:
When draw wing on a gen neral purpose e line, second
dary specificattion element trimming will not be
performed if the specificaation line is no
ot parallel.
Drawing on n a general pu urpose arc is only possible if the fixture has the same e center pointt as the
specified arrc.
4.
4 Mouse Sele
ection e to draw fixtu re width sizes
It is possible s to the maxim
mum values.
Construction -196
Bu
uilding / Fixxtures
Usage Ex
xample
<Command
< to
oolbar>
(3) “Co
onfirm Wall”
(3) Conffirm the wall ffor placing th
he object.
Click the left mousse button.
(5) “Sp
pecify Placem
ment Directio
on”
(5) Speciffy the directio
on in which too place the door.
Specify
y the placemeent direction (5
5).
Construction--197
Building / Fiixtures
(6) “Sp
pecify Multip
ple Placementt Direction”
(6) Speciffy the placem
ment direction n for multiple shapes.
Specify
y the placemeent direction (6
6).
(7) “Draw”
(7) Draw.
Two do
oor shapes aree drawn at the
e specified loccations.
[Double
[ Doorss]
[Differently
[ Sizzed Double Doors] (W1=800, W2=400)
Shown
S below is the case fo
or when the drawing
d base method is “End” for drawin
ng shape withh drawing loca
ation (1) and drawing
d
direction
d (2)
[Single
[ Swinging Door]
Construction -198
Bu
uilding / Fixxtures
[Double
[ Doorss]
Construction--199
Building / Fiixtures
[Differently
[ Sizzed Double Doors] (W1=800, W2=400)
When
W placing doors on walls, draw on wa
all lines (1)(2) and location (3),
( drawing direction (4) annd multiple pla
acement directtion (5).
(Place
( two double doors in a row with W11=900, W2=30 00, wall spacin
ng=100)
When
W placing doors on wallls, draw on wall
w lines (1)(2 ) and location
n (3), width (4)) , direction (66) and multiple
e placement direction
(7).
(
Place two douuble doors in a row at arbitra
ary width with door spacing of 100mm)
Construction -200
Bu
uilding / Fixxtures
2.
2 Draw a bay
y window
<Command
< to
oolbar>
Construction--201
Building / Fiixtures
(3) “Co
onfirm Wall”
(3) Confirm the wall fo or placing the
e object.
Click th
he left mouse button.
(5) “Draw”
(6) Draw.
Bay window is drawnn in the speciffied direction.
3.
3 Draw a fold
ding door
<Command
< to
oolbar>
Construction -202
Bu
uilding / Fixxtures
(3) “Co
onfirm Wall”
(3) Confirm the wall fo or placing the
e object.
Click th
he left mouse button.
Construction--203
Building / Fiixtures
(5) “Draw”
(6) Draw.
Folding
g door is draw
wn in the specified direction.
1. [Free Swin
nging Double Door]
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th
he drawing ba wing location (1) and
ase method is “Center” forr drawing shaape with draw
drawing dire
ection (2)
[Free
[ Swinging Single Doorr]
Construction -204
Bu
uilding / Fixxtures
[Free
[ Swinging Double Doo
or]
[Free
[ Swinging Differently Sized
S Double Doors] (W1=8
800, W2=400)
Shown
S below is the case fo
or when the drawing
d base method is “End” for drawin
ng shape withh drawing loca
ation (1) and drawing
d
direction
d (2)
[Free
[ Swinging Single Doorr]
Construction--205
Building / Fiixtures
[Free
[ Swinging Double Doo
or]
Construction -206
Bu
uilding / Fixxtures
[Free
[ Swinging Differently Sized
S Double Doors] (W1=8
800, W2=400)
When
W placing
g free swinginng doors on walls, draw o on wall lines (1)(2) and lo
ocation (3), ddrawing directtion (4) and multiple
m
placement
p dire
ection (5).
(Place
( two fre
ee swinging diffferently sized double doorss in a row with W1=900, W2
2=300, wall sppacing=100)
Construction--207
Building / Fiixtures
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th
he drawing ba
ase method is “Center” forr drawing shaape with draw
wing location (1) and
drawing dire
ection (2)
[3-pane
[ Sliding Window]
[4-pane
[ Sliding Window]
Construction -208
Bu
uilding / Fixxtures
[Fixed
[ window
w]
[Double-hung
[ Window]
[Pivoted
[ Wind
dow]
Shown
S below is the case fo or when the drawing
d base method is “End” for drawin
ng shape withh drawing loca
ation (1) and drawing
d
direction
d (2)
(For
( placing o ame for when drawing base
on arc walls, sa e = Center)
[2-pane
[ Sliding Window]
[3-pane
[ Sliding Window]
[4-pane
[ Sliding Window]
Construction--209
Building / Fiixtures
[Fixed
[ window
w]
[Double-hung
[ Window]
[Pivoted
[ Wind
dow]
When
W placing windows on walls,
w draw onn wall lines (1))(2) and locatio on (4) and mulltiple placeme
on (3), directio ent direction (5
5).
(Draw
( fixed w
windows in a ro
ow with spacin
ng of 100mm)
When
W placing windows on arc
a walls, draw
w on wall liness (1)(2) and location (3), dire
ection (4).
Construction -210
Bu
uilding / Fixxtures
3.
3 [Outside S
Sliding Door]
[Inside
[ Sliding
g Door]
[Outside
[ Slidin
ng Door]
[Inside
[ Sliding
g Door]
4.
4 [Shutter]
* Other drawin
ng examples are
a described below.
The differen
nces between drawing shap
pes for shutterrs and screens
s are shown below.
Construction--211
Building / Fiixtures
[Shutter/Scree
[ en]
5.
5 [Automatic
c Door]
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th
he drawing ba
ase method is “Center” forr drawing shaape with draw
wing location (1) and
drawing dire
ection (2)
Construction -212
Bu
uilding / Fixxtures
6.
6 [Revolving
g Door]
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th
he drawing ba
ase method is “Center” forr drawing shaape with draw
wing location (1) and
drawing dire
ection (2)
7.
7 [Closet]
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th
he drawing ba
ase method is “Center” forr drawing shaape with draw
wing location (1) and
drawing dire
ection (2)
[Closet]
[
8.
8 [Accordion
n Curtain]
* Other drawin
ng examples are
a described below.
Shown belo ow is the casse for when th he drawing ba ase method is “Center” forr drawing shaape with draw
wing location (1) and
drawing dire
ection (2)
[Accordion
[ Cuurtain] (Placem
ment location (1)
( is wall insid
de)
(Placement
( lo
ocation (1) is wall
w outside)
(Placement
( lo
ocation (1) is wall
w inside, placement locatio osite direction of (1))
on (2) is oppo
Shown
S below is the case foor when the drawing
d base method is “End” for drawin ng shape withh drawing loca ation (1) and drawing
d
direction
d (2)
[Accordion
[ Cuurtain] (Placem
ment location (1)
( is wall insid
de, placementt location (2) is
s upper right ddirection from (1))
Construction -214
Bu
uilding / Fixxtures
(Placement
( lo
ocation (1) is wall
w outside, pllacement loca
ation (2) is upp
per-right directtion from (1))
(Placement
( lo
ocation (1) is wall
w inside, placement locatio osite direction of (1))
on (2) is oppo
9.
9 [Variable H
Hole]
* Other drawin
ng examples are a described below.
Shown belo ow is the casse for when th ase method is “Center” forr drawing shaape with draw
he drawing ba wing location (1) and
drawing dire
ection (2)
[Variable
[ Hole
e] ((2) is the sa
ame for any lo
ocation)
Construction--215
Building / Fiixtures
Construction -216
Building / Building Hatch
H
Builldingin
ng Hattch
Function
n Overview
Building
B Hatch
h on walls and
d columns.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Building Hatch [M].
2.
2 Icon Menu
C
Click the icon shown
s to the left.
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Hatcch Style Select the drawing
d shapee.
(1) Concrete e
Draw [C Concrete].
(2) Block
Draw [B Block].
(3) Light-gauuge Steel
Draw [Light-gauge Stteel].
(4) Timber Column
C
Draw [T Timber Column n].
(5) Half Timber Column
Draw [H Half Timber Co olumn].
(6) Structuraal Material
Draw structural materrial [X].
y Structural Ma
(7) Auxiliary aterial 1
Draw au uxiliary structu
ural material 1 [/].
(8) Auxiliary
y Structural Maaterial 2
Draw au uxiliary structu
ural material 2 [\].
3.
3 Select Draw
wing Method Select the drawing
d metho od from [Single] or [Continuous].
(1) Single
Draw at the specified location in thee wall.
(2) Continuoous
Draw at intervals starrting from the drawing
d base position in thee wall.
4.
4 Input Spacing Input the drrawing spacing
g.
Input is only possible when selectin
ng the [Continuous] drawingg method.
5.
5 Drawing Ba
ase Point Set the drawwing base poiint.
(1) If checkeed:
Maintainn the [Drawing
g Base Point] that was spec
cified at the tim
me of first use..
(2) If not che
ecked:
Specify the [Drawing Base Point] fo
or each use.
6.
6 Advanced S
Settings Configure each
e drawing sshape.
Refer to
o the advanced d settings dialog description
n.
Construction--217
Building / Bu
uilding Hattch
Advance
ed Settings Dialog Description
2.
2 Vertical Len
ngth/Horizonta
al Length
Set the verrtical length/ho
orizontal lengtth ratio for [Light-gauge Steeel] [Timber Column] [Half Timber
Column].
(1) Vertical Length
Vertical length = wall thickness x se et ratio
(2) Horizonttal Length
Horizontal length = wawall thickness x set ratio
Construction -218
Building / Building Hatch
H
Contextu
ual Menu Description
D
Precautio
ons
1. Drawing Co
onditions
(1) When drawing metho od is [Continuous], portions
s of doors andd walls that have
h been sub
bject to
g processing w
trimming will not be dra
awn.
Construction--219
Building / Bu
uilding Hattch
For arc:
F
wing base poin t C between wall
Specify draw w 1A and wa all 2B.
(The angle fo
orming the line
e connecting X axis and cen m the drawing base point is θ.)
nter point from θ
45°
4 < θ < 135
5° Block line angle
a = θ + 45
5°
45°
4 < θ < 135
5° Block line angle
a = θ - 45°°
Construction -220
Building / Building Hatch
H
2.
2 Drawing to columns For “Single” drawing methhod it is possib
ble to select columns as thee specification
n element.
Only “Concrrete” can be d rawn in this ca
ase.
3.
3 When to se
et the drawing base point
When the drawing
d base ccheckbox is to oggled from onn to off,
drawing bas
se point that h
had been conttinued is cleareed when unchhecked.
When toggled from off to o on, the pointt which was specified
s the fifirst time after turning on be
ecomes
the base point.
Subsequent drawing ope erations will co
ontinue to use that drawing bbase point.
4.
4 Continuing The only ma aterial that su pports continuuing is straightt walls.
The first selected straigh t wall, parallel or perpendiccular straight w
walls can be continued.
c Con
ntinuing
is not possible for other ccases.
5.
5 Structural m
materials Only square
e column draw
wing is possib
ble for structurral material “xx”, auxiliary structural materrials “/”,
“\”.
Construction--221
Building / Bu
uilding Hattch
Usage Ex
xample
1. Draw conc
crete using [S
Single]
<Command
< to
oolbar>
2.
2 Draw conc
crete using [C
Continuous]
<Command
< to
oolbar>
3.
3 Draw light--gauge steel using [Contin
nuous]
<Command
< to
oolbar>
Construction -222
Buildin
ng / Modifyying a Structural Mem
mbers
Finishing
Function
n Overview
Draw column//wall finishing lines. Or, edit//delete previo usly drawn fin
nishing lines.
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Finishing
[C]].
2.
2 Icon Menu
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select commands related
d to architectu
ural drawings.
2.
2 Select Proccessing Select processing from “D Draw” “Modifyy” “Delete”
(1) Draw
Draw fin
nishing lines.
(2) Modify
Modify finishing
f lines..
(3) Delete
Delete finishing
f lines.
(4) Connectt
Connect together finisshing lines.
(5) Lengthen
Lengtheen or shorten ffinishing lines..
3.
3 Selecting S
Specification Method
M
Select spec cification meth
hod from “Indiccate Object” “Indicate Centeer” “1 Object”.
(1) Indicate Object
Indicate
e each individu b finished. Affter specifyingg the start point, it auto-detect can
ual object to be
be invokked from the ccontext menu.
(2) Indicate Center
Specify a round or recctangular area a enclosed by an object to aautomatically detect and se elect the
object.
Finishing lines are draawn outside thhe column whe en the inside oof a column has been indica ated.
(3) 1 Objectt
Only specify one finisshing line when deleting.
4.
4 Input Finish
hing Width Input the fin
nishing width.
Precautio
ons
1. Target obje
ects
Objects thaat are suppo orted selection
n when draw wing finish linnes are colum mns (except for H-
beams)/stra
aight walls/arc walls.
Since arc walls are not en
nclosed objectts, drawing is not supportedd for the “Indic
cate Center” method.
m
Construction--223
Building / M
Modifying a Structural Members
Usage Ex
xample
1. Draw finish
hing line usin
ng “Indicate Object”
O
<Command
< to
oolbar>
(3) onfirm”
“Co
(3) Compllete object sp pecification.
Click th
he right mousee button on Co
omplete Indica
ate Object.
(4) “Draw”
(4) w.
Draw
Draw
w column/wall ffinishing lines
s.
Construction -224
Buildin
ng / Modifyying a Structural Mem
mbers
2.
2 Draw finish
hing line usin
ng “Indicate Center”
C
<Command
< to
oolbar>
(2) “Draw”
(2) w.
Draw
Draw
w column/wall ffinishing lines
s.
<Command
< to
oolbar>
(2) onfirm”
“Co
(2) Delete.
Delette the column//wall finishing line.
Construction--225
Building / M
Modifying a Structural Members
4.
4 Connect finishing lines
s
<Command
< to
oolbar>
(2) onnect”
“Co
(2) Conne
ect.
Connect the column//wall finishing lines.
5.
5 Lengthen/s
shorten finish
hing lines
<Command
< to
oolbar>
(2) “Le
engthen”
(2) hen.
Length
Length
hen the columnn/wall finishing
g line.
Construction -226
Buildin
ng / Modifyying a Structural Mem
mbers
Grid
d
Function
n Overview
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Grid [L].
2.
2 Icon Menu
C
Click the icon shown to the left.
Comman
nd Toolbar Descriptio
on
1.
1 Command S
Selection Select comm
mands related
d to architecturral drawings.
2.
2 Grid Area Select the method
m for spe
ecifying the grid area.
(1) Border
Select start/end
s pointts (opposite co
orners) for the drawing areaa.
(2) Point Se
equence
Select drawing
d area b
by specifying multiple
m arbitra
ary points.
3.
3 Angle Input the griid drawing ang gle.
It is possible awing angle frrom the Angle Reference buutton.
e to set the dra
4.
4 Grid Point Set the grid point location
n.
(1) (Center)
Draw grrid point using the center of the smallest rectangle
r of thhe drawing are
ea.
(2) Specify
Draw sppecifying an arrbitrary point as
a the grid point.
Construction--227
Building / M
Modifying a Structural Members
Comman
nd Dialog Description
D n
1.
1 Grid Size I
Input the vertic
cal/horizontal grid size.
2.
2 Grout Specify whether to draw gro
S out.
If grout is selected, it is posssible to inputt the grout line
e width.
3.
3 Draw Frame
e S whether to
Set o draw a borde
er around the specified area
a.
1. Select Draw
wing Method It is possiblee to click the d
drawing selecttion area to se
elect the drawiing type.
The selection is indicated byy a yellow borrder.
T
W
When grout is enabled, all sshapes change e to grout shapes.
Construction -228
Buildin
ng / Modifyying a Structural Mem
mbers
Contextu
ual Menu Description
D
1.
1 Contextual Menu Describes th
he context-sen
nsitive informa
ation.
Precautio
ons
1.
1 Drawing Screen D
Drawing surface only drawss on the selectted screen.
2.
2 Angle IIt is possible to
o set the base
e angle of the specified area
a by specifyingg the base line
e.
This angle be ecomes the baase for the dra
awing angle. The
T drawing aangle is calcula ated based offf of this
b
base angle.
Construction--229
Building / M
Modifying a Structural Members
Base angle = 30
0° Base angle =30°
Dra
awing angle = 0° Drawing angle=30°
3.
3 Drawing Pa
attern Before drawing, set the grid
B d start point to either the cen
nter or edge off the grid size border.
For a basic grid
g patterns, t here are two patterns:
p edgee and center.
For hound’s
s-tooth check vvertical and ho
orizontal patte
erns, there aree three pattern
ns: 2 edge, 1 center.
c
4.
4 Drawing Lim
mitations The maximu um number o of drawing ele ements for a grid is apprroximately 10 0,000 elementts. The
following mes
ssage is displlayed if this nu
umber is exce
eeded. If this hhappens, dec
crease the size
e of the
drawing area
a.
Usage Ex
xample
1. Draw a title
e grid
<Command ttoolbar>
Construction -230
Buildin
ng / Modifyying a Structural Mem
mbers
(5) “Draw”
(5) Draw
w.
Draw
w the grid in th e selection arrea.
<Command
< to
oolbar>
Construction--231
Building / M
Modifying a Structural Members
(2) “Sp
pecify Drawin
ng Area”
(2) Spec cify the locatiion of the dra
awing area.
g area by sppecifying arbitrary points (1)) ~ (7).
Set grid
nd (1) are the same point.
(7) an
(5) “Draw”
(5) Draw
w.
Draw
w the grid in th e selection arrea.
Construction -232
Buildin
ng / Modifyying a Structural Mem
mbers
Mod
difying
g a Strructura
al Mem
mbers
Edit Partts
How to L
Launch the Command
d
1. Pulldown MMenu
Click [B
Building (K)] [Modifying
a Structural Me mbers [E].
2.
2 Icon Menu
Comman
nd Toolbar Descriptio
on
1. Command S
Selection Select comm
mands related
d to architecturral drawings.
2.
2 Select Proccessing Select the ty
ype of edit pro ocess for the structural
s mem mber.
(1) Combine e
Combine walls or bea ams that have already been placed on thee drawing.
(2) Divide
Divide walls
w or beamss that have alrready been pla aced on the d rawing.
(3) Change Size
Change e the size of ccolumns, walls s, beams, foun ndations, floorrs, ceilings, ro
oofs, fixtures or
o grids
that hav
ve already bee en placed on the drawing.
(4) Change Level
Change e the level of Column Grid Lines, colum mns, walls, beaams, foundations, floors, ceilings,
c
roofs, orr fixtures that have already been placed on o the drawingg.
(5) Trim
Trim collumns, walls o or fixtures thatt have alreadyy been placed on the drawin ng.
(6) Retrim
Reverse e trim operati on for columns, walls or fixtures
f that hhave already been placed on the
drawing.
(7) Move
Move walls,
w beams, fo
foundations orr fixtures that have
h already bbeen placed on o the drawing g.
(8) Lengthen
Lengtheen or shorten walls, beams s, foundations or columns tthat have alre eady been pla aced on
the drawwing.
(9) Change Fixture Directtion
Change e the drawing d direction of fix
xtures that hav
ve already beeen placed on the drawing.
3.
3 Select Edit Method Select edit method
m from ““Single” – “Battch” – “Part".
(1) Single
Select a single part th
hat has already been placed d on the drawiing.
(2) Batch
Batch seelect several pparts that have
e already been placed on thhe drawing.
(3) Part
Select tw
wo parts for T
Trim.
Trim thee selected part
rts where they overlap.
Select one
o part for Re etrim.
Trim operation is reveersed for only the selected part.
p
4.
4 Specify Levvel When chang ging levels, usse mouse sele
ection to confirrm the selecteed level.
(Not availab
ble for use withh LT products. Use with this
s box uncheckked)
Construction--233
Building / M
Modifying a Structural Members
Change S
Size Dialog
g Description
2.
2 Current Vallue Shows the current value e for each selected part. NotN shown whhen multiple parts
p selected during
batch mode e.
Flat placement angle (parrt inclination) is only shown for columns/H
H-beams.
3.
3 New Value Input the de
esired new val ue for the item
m(s) to be changed.
Construction -234
Buildin
ng / Modifyying a Structural Mem
mbers
4.
4 Reference Button Click this bu
utton to show the size of pa
arts already placed on the ddrawing that are
a the same kind as
the selectedd part.
Change L
Level Dialo
og Descripttion
2.
2 Current Vallue Shows the current value
e for each selected part. Not
N shown whhen multiple parts
p selected during
e.
batch mode
3.
3 New Value Input the de
esired new vallue for the item
m(s) to be cha
anged.
4.
4 Reference Button Click this button to show arts already placed on the ddrawing that are
w the size of pa a the same kind as
the selectedd part.
Construction--235
Building / M
Modifying a Structural Members
Precautio
ons
1.
1 Editing General purrpose parts m oved or copie ed by moving/c copying and sshowing sectio onal view mayy not be
displayed prroperly for the
e level within th
he attribute orr level when edditing parts dis
splayed above
e.
2.
2 Combining Parts that can
c be combin ned are straighht walls / beam
ms (no haunchh/H-beams).
This is desccribed using th
he wall below. Beams are no ot trimmed.
Here, two walls
w that are a
aligned along the same parrallel line are combined into o one wall. Hoowever,
combination n is not possib
ble when theree are differences in wall thickkness, wall type, bottom ennd level,
wall height, drawing laterr, color, line type
t or line width.
w Wall pa rts with different finishing lines
l or
centering lin
ne settings maay be combine ed, but the commbined wall w will assume thee attributes of P1.
3.
3 Dividing Parts that can
c be divided are straight walls
w / beams (no haunch/H -beams).
Use Retrim for walls/colum
mns for wall parts
p that have
e disappeared .
4.
4 Changing S
Size Changing size
s is possib le for column ns, walls (samme wall type),, beams (sam me size beam
m depth
start/end pooints), foundatiions, floors, ce
eilings, roofs, fixtures and ggrids.
Finish lines and grid shap pes drawn for shapes are de eleted when s ize is changed
d.
Trimming is s performed a after changing g size regardless of whethher the part was trimmed before
resizing.
It is possible
e to select parrts that were not
n modified affter completingg batch processing.
5.
5 Changing L
Level Level can be b changed fo or Column Grid e), columns, sstraight walls, beams, found
d Lines (single dations,
floors, ceilin
ngs, roofs andd fixtures.
It is possiblee to select parrts that were not
n modified affter completingg batch processing.
It is possiblee to change thhe level base (view
( from below/view from above) for be eams.
6.
6 Trimming s possible forr columns, straight walls, arc walls and ffixtures. Trimming for arc walls
Trimming is w is
performed when
w the endss of arc walls lie on top of co
olumns or straaight walls.
7.
7 Retrimming
g Retrimming
g is possible fo
or columns, straight walls, arc walls and fifixtures. Retrim
mming for arc walls is
performed when
w the endss of arc walls lie on top of co
olumns or straaight walls.
Construction -236
Buildin
ng / Modifyying a Structural Mem
mbers
It is possible
e to perform re
etrimming for primary speciffied part or witthin frame only.
8.
8 Moving Moving is possible
p for strraight walls, arrc walls, founddations and fixxtures.
Retrim is pe
erformed beforre moving and d trim is perforrmed after movving.
When movin ng walls, fixturres, finish or grids
g on the wa all are also mooved at the sa
ame time.
9.
9 Lengthening Lengtheningg is possible fo
or columns, sttraight walls, arc
a walls and ffoundations.
Trimming is performed forr the part bein
ng lengthened or shortened..
Construction--237
Building / M
Modifying a Structural Members
10.
1 Changing Fixture Direction This command may on ly be used forr fixtures.
Usage Ex
xample
1. Divide a wa
all part
Construction -238
Buildin
ng / Modifyying a Structural Mem
mbers
2.
2 Change the
e size of a co
olumn part us
sing Single m
mode
(2) “Se
ettingize”
(2) Channge the size.
Set the columns veertical size, ho
orizontal size and
a height (2)).
Vertic
cal size 600
Horiz
zontal size 6000
Colummn height 45500
Click the OK buttonn to confirm.
Construction--239
Building / M
Modifying a Structural Members
3. Change th
he level of a beam
b using Single
S mode
(2) et Level”
“Se
(2) Channge the level..
Set the beam top l evel (2).
Beaam top level: -150
Click the [OK] buttoon.
(3) “Draw”
(3) cify the structtural member to change the level.
Spec
Return to (1) screeen after chang
ging the level.
4. Retrim a s
square colum
mn
(1) “Sp
pecify Square
e Column”
(1) Speciffy the structu ural member to t be trimmed d.
Specify y the square ccolumn (1) to be
b trimmed.
* All hid
dden square ccolumns are used
u due to trim
mming.
(2) etrim”
“Re
(2) Speccify the structtural member to trim.
Trim the specified square colum
mn.
Construction -240