Documente Academic
Documente Profesional
Documente Cultură
www.poliformasplasticas.com.mx
servicio_clientes@poliformasplasticas.com.mx
Indice
Table of Contents
Moldes y Accesorios para Fabricación de Piezas de Superficie Sólida y Mármol Sintético
www.poliformasplasticas.com.mx 2
servicio_clientes@poliformasplasticas.com.mx
Special Ordering Instructions by Mold Category
Floating Bowl
All Molds: Designations
All molds are available in Meta Mold (M) and Vinyl Ester (VE) material. When ordering, add Each bowl listed in the right side column
M after the part number to specify Meta Mold, or V after the part number to specify Vinyl utilizes a code in the description for that
Ester material. product. These are those codes.
AA.............. Topaz
Bowls and Sinks: CC .............. Malibu
The permanent hat part number displayed is for Styrene hats. CC109....... Malibu (Larger than CC)
x of “C” to the part number. CCSD ........ Malibu w/Soap Dish
x of “W” to the to the part number. DCL-FL ..... Malibu Flair or Malibu Flair OG
Before placing your new molds into production, refer to the “Mold Break-In Instructions” DD ............. Diamond
found on the Appendix. DE.............. Delaware
Bowls and sinks are shipped in mold cartons, and do not require a crate to be included Deep N..... Deep Laguna
with the order.
DESD ........ Delaware w/ Soap Dish
EL............... Pearl (No RH or PFH available)
Modular and Vanity Decks FAB104..... UO Ambassador or US
ed according to the following FAB108..... O Coronado
mold numbering system: G ................ Carmel
Example: 111-N-48-RB. GS ............. Kona
rst group of numbers (111) designates the series of the vanity top. This series I .................. Mai Tai
number characterizes the features of the vanity top such as a straight or dripless edge;
L ................. Newport
integral backsplash; depth and height of backsplash.
LDD........... Little Diamond
The next letter (N) refers to the bowl series of a modular mold. When the vanity top is
available without a bowl, the designation NB (no bowl) is given in this space. Refer to the LL............... Deep Newport
sidebar at right for the list of bowls and their abbreviatons. LN ............. Monterey
The next number (48) refers to the normal length of the vanity top. LNS ........... Makaha
nished product as LRL ............ Small Royale
being either LB (left bowl), RB (Right bowl) or DB (Double bowl). If there are no letters,
located in the center of the vanity top. LZ............... La Paz
MMR ......... Super Bowl III
MR ............. Super Bowl II
N ................ Laguna
NS.............. Waikiki
NX.............. Laguna - No Faucet Landing
Custom or Special Order Molds:
P................. Moana
ciently design and manufacture any RL .............. Royale
custom mold or special design. In addition to the standard RR .............. Super Bowl I
Gruber molds shown in this catalog, Gruber can take any RRSD......... Super Bowl w/ Soap Dish
input from you - no matter if an idea, sketch, drawing, or CAD S ................. Molokai
design - and quickly manufacture a One-Up Prototype, a SH (R)........ Savannah
Permanent Master, a One-Up Master, or a production mold. SL............... Catalina
You simply approve the design, determine which type of SS............... Deep Molokai
master or mold you desire, and Gruber takes care of the rest! V................. Ventura
W ............... Hilo
Call today for more information!
WSD.......... Hilo w/Soap Dish
WX............. Maui
Y................. Redondo
YS............... Lanikai
www.poliformasplasticas.com.mx 3
servicio_clientes@poliformasplasticas.com.mx
Female Mold Types
erent types of “females” as Styles
described below. The female molds is sometimes referred to as a Fiberglass females, permanent hats, and reusable hats vary by
“female hat” because of the way it is positioned over the top of the oating or Modular
male mold during casting. c bowl model for the correct female
hat for that bowl. Order by catalog number and mold description.
WHEN ORDERING A MOLD, BE SURE TO ORDER THE FEMALE
AS A SEPARATE ITEM, AS THE FEMALE IS NOT AUTOMATICALLY Types of female hats include:
INCLUDED WITH THE MALE MOLD ORDER. PH - Permanent Female Hat
RH - Reusable Female Hat (Trimmed)
Molds UNTRM-RH - Reusable Female Hat (Untrimmed)
Female mold: The mold that forms the underside or backside of FFF - Floating Fiberglass Female
a cast polymer product. When properly positioned with the male Challenger - Floating Fiberglass Female (Challenger type)
mold, it creates the cavity into which the matrix is cast. The female
mold is often referred to as the “Female Hat” because of the way it FFO - Fiberglass Female (Flange Out)
is positioned over the top of the male during casting. Full Cover Fiberglass Female - types
Note: order these by modular mold length
Fiberglass Females FFL - Fiberglass Female (Lightweight)
berglass similar to the
ULFF - Fiberglass Female (Ultralight)
berglass female hats are the most
dimensionally stable and result in a uniform wall thickness. The
berglass female must be clamped or weighted down in order to
complete casting the product.
Permanent Hats
These hats become a permanent part of the marble product,
nished underside which requires very little, if any,
rst
cast immediately following vibration. Gently depress the step-
ange into the matrix just enough too barely
rst cast of matrix has gelled and cooled, the
second cast (backpour) can be made. The permanent hats are
available in a white or clear plastic.
Reusable Hats
Fabricated of high-density polyethylene, a reusable hat will
provide many trouble free casting if reasonable care is exercised in
its use and storage. A reusable hat is applied to the mold after the
initial pour of the matrix has been vibrated. It is placed over the
bowl and the rim of the hat is gently pressed into the un-gelled
ange is provided around the perimeter of
the hat to allow for maximum adhesion of the hat to the matrix.
ange
around the perimeter.
www.poliformasplasticas.com.mx 4
servicio_clientes@poliformasplasticas.com.mx
Mold Gelcoat Selection
Metamold Metamold B
Metamold is the preferred choice for demanding applications • Metamold molds are suitable for high exotherm
where durability is the key consideration. For only a small cost temperature applications.
• Metamold molds are ideally suited for non-gelcoated
the market for solid surface and cultured marble casting. In fact, Granatex 500 applications.
Metamold is the ONLY choice recommended by Gruber for solid • Metamold molds provide extended mold life.
surface production due to its ability to handle higher exothermic • Metamold molds save time.
temperatures created with solid surface material processing.
es Gruber’s proprietary Vinyl Ester (VE) Gelcoat
gelcoat and the Metamold option. This metallic composite
surface, combined with state-of-the art lamination techniques and Vinyl Ester is ideally suited for low production shops (turn molds
specialized box construction, is an option you will want to include once a day). VE, although not as tough as META, will give many
on all of your Gruber mold orders. years of trouble free service at a reduced cost.
Metamold Advantages: When should you consider using Vinyl Ester?:
• Metamold’s metallic composite gelcoat provides greater • VE is lower cost than Metamold (approximately 15%
surface strength: typically)
o Greater surface strength means the original high gloss • VE is helpful in areas where low production volume is
retained longer. expected.
• VE can be used in applications where the mold surfac
• Metamold’s metallic composite gelcoat provides is not as critical - such as for female molds.
improved chemical resistance: • Because VE creates a mor rface compared to
o Improved chemical resistance makes product release Metamold, molds subjected to twisting or bending may be
and demolding less time consuming. better suited to this VE.
o Improved chemical resistance lowers surface tension The same release agents that are used with Vinyl Ester are used
thus reducing crazing. with Metamold - so you can use a single release systems for both
options.
www.poliformasplasticas.com.mx 5
servicio_clientes@poliformasplasticas.com.mx
Mold Ordering Options
Mold Options - Crating* Mold Options (continued):
* Crating includes both Male and Female shipped together, unless noted
otherwise. Crating for ocean shipment or other special requirements will be Step Skirts
an extra charge.
Part Number Description
Order Number Description
010972 Yellow Divider/Step Skirt
C-100S Crate - 72” and larger Vanity, Modular and Challenger Construction
No Bowl Decks
C-101S Crate - Pedestal (all) (order by mold length):
C-102S Crate - End Splash Part Number Description
C-103S Crate - Backsplashes (all) OP100 25” or under
C-104S Crate - Bathtubs (all) OP101 31”
C-105S Crate - Speedy Plugs (all) OP102 37”
C-107S Crate - Showerpans (all) with Female OP103 43”
C-108S Crate - Wall Panels - 32 square feet and smaller OP104 49”
C-109S Crate - Wall Panels (over 32 square feet) OP105 61”
C-110S Crate - Trim Molds OP106 73”
C-113S Crate - Table Tops (and other shapes)
OP107 86”
C-114S Crate - Floor Tile
OP108 96”
C-115S Crate - Window Sill/Column
OP109 124”
C-117S Crate - Replacement Backsplash (only)
C-119S Crate - Sample Molds (all) OP110 146”
C-300S No Crate Note: Includes Heavy-duty Backsplash and Hinge; Hardwood
Runners, and J Channel Metal Framework. Gee Mold Clamp
Mold Options (universally applicable to compatible. Gee Mold Clamps are not included.
all molds)
Mold Options - Bathtubs
Mold Track
Part Number Description
Part Number Description 103615 H.D. Gee Clamp (Mold) (each)
OP051 Mold Track 25” (or under) Mold Track (see Mold Track section on this page)
OP052 Mold Track 31” 02012 Vibrator 25 (Pneumatic)
OP053 Mold Track 37” 02013 Vibrator 35 (Pneumatic)
OP054 Mold Track 43” 02014 Vibrator 41 (Pneumatic)
OP055 Mold Track 49” Vibrators - Electrical (call)
OP056 Mold Track 61” 29300 Step Straight Skirt for Rectangular Tubs, 90”
OP057 Mold Track 73” 493001 Female Step Skirt for Rectangular Tubs, 90”
OP058 Mold Track 86” 010972 Yellow Divider/Step Skirt
OP059 Mold Track 96” C-104S Crating Charge - apples to all Bath Tubs
OP060 Mold Track 120”
OP061 Mold Track 144”
OP061 Mold Track Bathtub (ea). Mold Options - Modulars
ow Options (order by option number):
Clamps
Part Number Description
For Male and Female (FFO) and Ultralight ow
Fiberglass Female (ULFF) ow
Part Number Description ow Hole
103615 H.D. Gee Clamp (Mold) (each) Mold Track - Refer to Mold Track section on this page
For Custom Molds Drain Boss
Part Number Description OP029 Drain Boss (Installed)
1910751 Camover Clamps (installed on mold) - Challenger Option - refer to Universal Options (above)
Set of one each clamp and striker
191075 Camover Clamps -
Set of one each Clamp & Sriker
www.poliformasplasticas.com.mx 6
servicio_clientes@poliformasplasticas.com.mx
Tinas de Baño
Bathtubs
Oval
Mark 14 Mark 19 Mark 26
www.poliformasplasticas.com.mx 7
servicio_clientes@poliformasplasticas.com.mx
Tinas de Baño
Bathtubs
Oval
Mark 44 Mark 52 Mark 58
A A
39 1/2”
(100cm) 27 1/8”
(69cm)
33 5/16”
(85cm)
NEW!
Sadie I: 0702EX103 Sadie II: 0702EX104
nish.
Call for more information
Above: Sadie I tub
Sadie I Sadie II
One-person freestanding tub - 65 x 36” 1-2 person freestanding tub - 72 x 38”
65”
165cm
72”
183cm
Cast Weight (Cultured Marble) 170 lb
Cast Weight (Cultured Marble) 210 lb
Part Number Description
Part Number Description
Male
66573 Sadie I - 65 x 36” Male
66569 Sadie II - 72 x 38”
Female
8657381 Insert (Turtle) - Sadie I Female
865738 FFL-Sadie I 8656981 Insert (Turtle) - Sadie II
865698 FFL-Sadie II
Claw-feet
The Sadie I and II tubs require use of a set of integral claw- Coated Finishes Order No. UOM
feet shown below. Claw-feet are available in the following White (Kohler) 070201 Set/4
painted or plated options, and are ordered in sets of 4.
Biscuit (Kohler) 070202 Set/4
Bone (American Standard) 070203 Set/4
Almond (Kohler) 070204 Set/4
Plated Finishes Order No. UOM
Polished Chrome 070205 Set/4
Polished Nickel 070206 Set/4
Polished Brass 070207 Set/4
Satin Nickel 070208 Set/4
Custom Color or Finish (specify) Quotation only Set/4
www.poliformasplasticas.com.mx 9
servicio_clientes@poliformasplasticas.com.mx
Tinas de Baño
Bathtubs
Rectangular
Mark 8 Mark 12 Mark 23
www.poliformasplasticas.com.mx 10
servicio_clientes@poliformasplasticas.com.mx
Tinas de Baño
Bathtubs
Rectangular
Mark 46
www.poliformasplasticas.com.mx 11
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1050 (Textured pan pattern without a water dam)
1050-1 1050-5 1050-9
www.poliformasplasticas.com.mx 12
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1050 (Textured pan pattern without a water dam)
1050-13 1050-15 1050-17
1050 Series Universal Shower Pans Example Universal Shower Pan shown at PN 23021 - 96” (A)
All 1050 Universal Shower Pans have center drains and
a minimum drain slope of 1/4” per foot of horizontal
distance.
Size Options:
(inches)
Male Part
A B Number Description
48 60 23026 1050-26 - 48 x 60” (121.9 x 152.4cm)
60 72 23018* 1050-18 - 60 x 72” (152.4 x 182.8cm)
60 84 23032 1050-32 - 60 x 84” (121.9 x 213.3cm)
60 96 23023 1050-23 - 60 x 96” (152.4 x 243.8cm)
72 96 23019 1050-19 - 72 x 96” (182.8 x 243.8cm)
72 120 23025 1050-25 - 72 x 120” (121.9 x 152.4cm)
84 84 23024 1050-24 - 84 x 84” (213.3 x 213.3cm)
84 120 23027 1050-27 - 84 x 120” (213.3 x 508cm)
84 96 23046 1050-46 - 84 x 96” (213 x 243.8cm)
86 120 23028 1050-28 - 86 x 120” (218.4 x 508cm)
89 120 23029 1050-29 - 89 x 120” (226 x 508cm)
94 120 23031 1050-31 - 94 x 120” (238.7 x 508cm)
96 96 23020 1050-20 - 96 x 96” (243.8 x 243.8cm)
96 120 23021 1050-21 - 96 x 120” (243.8 x 508cm)
* Female Part Number 430189
www.poliformasplasticas.com.mx 13
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1051 (Designer textured pan pattern with integral water dam)
All Series 1051 shower pans include the 3/8" (9.5mm) 1051-6
an integral water dam and drain: 1/2" (12.7mm)
1" (25mm)
4 3/8" (111mm)
1 3/4" (45mm)
5 1/2" (140mm)
1051-7
Part Number Description Part Number Description
Male Male
23051 1051-1 Shower Pan 38x38” Crnr 23054 1051-4 Shower Pan T48 x 42”
Female Female
430518 F-1051-1 Shower Pan 430548 F-1051-4 Shower Pan Insert
Lightweight Female 1/2” 4305481 F-1051-4 Turtle
430519 F-1051-1 Combo Insert Lightweight Female 1/2”
Part Number Description
1051-2 430549 F-1051-4 Combo Insert
Male
23057 1051-07 Shower Pan T42x36”
1051-5 Female
430578 F-1051-07 Shower Pan
4305781 F-1051-07 Turtle
Lightweight Female 1/2”
430579 F-1051-07 Combo Insert
www.poliformasplasticas.com.mx 14
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1051 (Designer textured pan pattern with integral water dam)
1051-9 1051-12 1051-15
1051-14 1051-17
www.poliformasplasticas.com.mx 15
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1051 (Designer textured pan pattern with integral water dam)
1051-18 1051-21 1051-24
1051-26
1051-20
Part Number Description
Male
23074 1051-23 Shower Pan T60 x 30”
Female
430748 F-1051-23 Shower Pan Part Number Description
4307481 F-1051-23 Turtle Male
Lightweight Female 1/2” 23077 1051-26 Shower Pan T60 x 32”
Part Number Description
430749 F-1051-23 Combo Insert Female
Male
430778 F-1051-26 Shower Pan
23069 1051-20 Shower Pan 48x48” Crnr
4307781 F-1051-26 Turtle
Female
Lightweight Female 1/2”
430698 F-1051-20 Shower Pan
430779 F-1051-26 Combo Insert
4306981 F-1051-20 Turtle
Lightweight Female 1/2”
430699 F-1051-20 Combo Insert
www.poliformasplasticas.com.mx 16
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1051 (Designer textured pan pattern with integral water dam)
1051-27 1051-30 1051-33
40.0" (101.6 cm)
12 1/2" (31.8 cm)
TEXTURED
SURFACE
5
12 1/2" (31.8 cm)
1051-28
3 1/4" (82mm)
1/4" PER FT. DRAIN SLOPE
Part Number Description Sections showing water dam and drain details.
Part Number Description Lightweight option not shown.
Male
23079 1051-28 Shower Pan T72 x 36” Male Part Number Description
23082 1051-31 Shower Pan T42 x 34”
Female Male
430798 F-1051-28 Shower Pan Female 23084 1051-33 Shower Pan 40 x 40”
4307981 F-1051-28 Turtle 430828 F-1051-31 Shower Pan Corner
Lightweight Female 1/2” Lightweight Female 1/2” Lightweight Female 1/2”
430799 F-1051-28 Combo Insert 430829 F-1051-31 Combo Insert 430849 F-1051-33 Combo Insert
1051-29 1051-32
1051-34
1051-35
www.poliformasplasticas.com.mx 17
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1052 (Designer textured pan with accessibility-compliant entrance)
The following shower pans are “Accessibility” ramps for applications where ADA is mentioned.
Series 1053
www.poliformasplasticas.com.mx 18
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Series 1054 Raised sill on outer edge prevents water
.69
60” Neo Angle
DETAIL E
1.00 SCALE 1 : 4
5.25
4.25
Order No. B
230994M*
36.00
B
T60 x 36 Rectangular
Center Drain 1.02
60.00
.26
5.25
PN - 4309919M* 36.00
R.125
R.375
1.73
3.53
* for Vinyl Ester, replace the M with a V R.50
B R.625 .75
C 1.00
.56
www.poliformasplasticas.com.mx 19
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
T60 x 32 Rectangular
Right Drain 60.00
1.54
5.25
R1.25
SECTION A-A .750
PN - 230992M*
.50
A A
Female Mold: M-ULFF-02
T60 x 32 Right Drain 32.00
1.00
* for Vinyl Ester, replace the M with a V .54
B 9.00
.75
3.92
60.00 1.55
T60 x 32 Rectangular
Left Drain
1.50 1.32
Female Mold: B B
M-ULFF-03 32.00
.75
T60 x 32 Left Drain
4309949M*
C .50
1.00
3.69
.75
* for Vinyl Ester, replace the M with a V A
R.50 5.25
4.25 .56
60.00
SECTION A-A DETAIL C
SCALE 1 : 4
www.poliformasplasticas.com.mx 20
servicio_clientes@poliformasplasticas.com.mx
Pisos para Regaderas
Shower Pans
Threshold/Curb Molds for use with Universal Shower Pans
Threshold Mold - 4 x 5 x 96”
Part Number Description
Male
22680 4 x 5 x 96” Threshold Mold
Insert
426808 F-4 x 5 x 96” Threshold Insert
Dividers
010897 Yellow Divider 4 x 5”
010897R Black Divider 4 x 5”
72" (183mm)
20.00
2" (51mm)
3/8" (10mm)
1 1/2" (38mm)
TEXTURED SURFACE
8" (203mm)
Textured Solid Surface Solid Surface Undermount
Undermount
72" (183mm)
2" (51mm)
1 1/2" (38mm)
3/8" (10mm)
Part Number Description
12" (305mm)
TEXTURED SURFACE
Male
Part Number Description 23300 Solid Surface Undermount
Male Pan 32 x 32” with 1”
233005 Textured Solid Surface undermount lip
Undermount Pan 32 x 32” Female
with 1” undermount lip 433009 F-Undermount (SS)
Female
433009 F-Undermount (SS)
www.poliformasplasticas.com.mx 21
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Vessels)
Vessel Bowls (Above Counter and Drop-In)
Square Hemisphere 10-1/2 Stepped Hemisphere
A
A 10.50 7.00
with Faucet Landing
4.75
3.50
R.25
B B
R17.06
5.25 13.00 10.50
14.35
12.00
SECTION A-A
Male
3.50
Male
20162 18” Square 20155 Hemisphere Vessel 10-1/2” ID 3.50
Oval
.75
B .50
A .50
SECTION A-A
Part Number Description A A
SCALE 1 : 6
Male
Part Number Description 20157 18” Hemisphere w/ Faucet 10.1
8.0
Male Landing
20152 Hemisphere (Round) Vessel Female 1.75
18” (I.D.) 4015781 18” Hemisphere w/ Faucet B
Female Landing 14.1
SECTION B-B
SCALE 1 : 6
401529 F - SS Hemisphere Vessel 18” 12.0
401529M-C F - CM Hemisphere Vessel 18” Stepped Hemisphere 4.0
A
20.00
11.00
Part Number Description
18.00 4.00
Male
18.00
20158 12” Oval Vessel
16.00
SECTION A-A
SCALE 1 : 6 Female
5.50
A 3.50
4015881 F - 12” Oval Vessel - No
3.50
ow
.50
8.00
www.poliformasplasticas.com.mx 22
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Vessels)
Vessel Bowls (Above Counter and Drop-In)
A 5.00
SECTION A-A
SCALE 1 : 6
16" (40.7cm)
Part Number Description
Male
20154 16” Cone
Female
5" (12.8cm) 401548 F - 16” Cone
Flat
EDGE DETAIL
1:1
5" (12.8cm)
Enlarged detail
of the bowl rim.
www.poliformasplasticas.com.mx 23
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Oval
Floating bowls are mounted on custom no-bowl vanity decks to become and integral part of the cast
berglass
females. Most bowls are available with reusable and permanent hats. There are four styles - oval, rectan-
gular, shell and designer.
Laguna Newport Malibu
00341 PH-Comp-N
ow
14 7/8" (38cm)
Reusable Hats
01362 RH-N/NS 12 3/4" (32cm)
ow
013622 RH-N/NS Square Oversize
013622N RH-N-N Square Cast Weight (3/4” Female mold) - 20 lbs.
Part Number Description
Water volume at 7/8” belo
Deep N (Laguna) Male U.S. gallons
20029 108 LL Deep Newport
20006MA Accucast Template Newport Part Number Description
Female Male
400297 FFF-108 LL Deep Newport 20006 108-DCL/FL Malibu Flair
40012MA 20006MA Accucast Template Malibu
FFF-108 LL Newport Accucast Flair
Part Number Description Permanent Hats Female
Male 00224 PH-LL 400069 FFF-108 DCL/FL Malibu Flair
20030 108 Deep N 7.5 ow Permanent Hats
Female Reusable Hats 00343 PH-108-DCL/FL
400308 F-108 Deep N 7.5 01368 RH-LL Reusable Hats
Permanent Hats 01460 RH-LL - Untrimmed 01442 RH-108-DCL/FL
00286 PH-Deep N
Reusable Hats
01395 RH-Deep N
www.poliformasplasticas.com.mx 24
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Oval
19.375 (49cm)
www.poliformasplasticas.com.mx 25
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Oval
Permanent Hats Catalina Carmel
ow
00205 PH-VSS-108
Reusable Hats
01452 RH-LG Olympic - Untrimmed
Pearl
Part Number Description Part Number Description
Male Male
20019 108 SL Catalina 20007 108 G Carmel
20007MA Accucast Template Carmel
Female
400197 FFF-108 SL Catalina Female
400195 FFF-108 SL Catalina Support 400077M FFF-108 G Carmel
Part Number Description 40019MA FFF-108 SL Catalina Accucast Permanent Hats
Male Permanent Hats 00206 PH-G/GS
20004 108 EL Pearl 00226 PH-SL 00207 PH-G/GS 5/8”
200041 108 EL-Pearl Euro ow ow
20004MA Accucast Template Pearl Reusable Hats
Reusable Hats
Female 01369 RH-SL 01356 RH-G
400047 FFF-108 EL Pearl 014634 RH-SL - Untrimmed ow
400045 FFF-108 EL Pearl Support ow
Redondo 01456 RH-G/GS - Untrimmed
Mini Pearl
Ventura
www.poliformasplasticas.com.mx 26
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Oval
Sun Oval (Large) Delaware (With Soap Dish) Dixie (Small)
www.poliformasplasticas.com.mx 27
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Oval
Super Bowl I Super Bowl II
www.poliformasplasticas.com.mx 28
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Rectangular
Royale (Small) Savannah Wave (Standard/Large)
www.poliformasplasticas.com.mx 29
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Shell
Mai-Tai Deep Molokai Hilo (With Soap Dish)
Continued from previous column
Permanent Hats
00231 PH-WSD
ow
Reusable Hats
01379 RH-WSD
Part Number Description Part Number Description ow
Male Male 01465 RH-WSD - Untrimmed
20009 108-I Mai Tai 20033 108-SS Deep Molokai
20007MA Accucast Template Mai Tai Female Lanikai
400828 FFF-108 SS Deep Molokai
Female Permanent Hats
400097 FFF-108 I Mai Tai 00227 PH-SS
400098 FFF-108 I Mai Tai - No Reusable Hats
ow 01371 RH-SS
Permanent Hats 01471 RH-SS - Untrimmed
002081 PH-I
ow Hilo Part Number Description
Reusable Hats Male
01358 RH-I - Square Pourhole 20016 108-YS Lanikai
ow Female
01458 RH-I - Untrimmed 400167 FFF-108 Y/YS
ow
Molokai 400165 FFF-108 YS Support
Permanent Hats
Part Number Description 00222 PH-Y/YS
Male ow
20013 108-W Hilo ow
20004MA Accucast Template Hilo Reusable Hats
Female 01366 RH-Y/YS
400137 FFF-108 W Hilo 01466 RH-Y/YS - Untrimmed
400013MA FFF-108 W Hilo Accucast
www.poliformasplasticas.com.mx 30
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Shell
Moana Canadian (Large) Waikiki
Continued from previous column
40009 FFF-108 N/NS Accucast
40009MAI FFF-108 N/NS Accucast w/
ow
40009MA FFF-108 N/NS Accucast w/ Ext
ow
Part Number Description Permanent Hats
Male Part Number Description 002831 PH-N Square Oversized
20037 108-P Moana Male 002560 PH-N Texas
20076 108-Canadian Shell 002512 PH-N Texas No Faucet
Female
Female Landing
400377 FFF-108 P Moana
400758 FFF-108 Canadian Shell 00284 PH-N/NS
Permanent Hats ow
Permanent Hats
00217 PH-P 00283 PH-N/NS Square
002237 PH-Canadian Oval/Shell
ow 00281 PH-N/X Square - No Faucet
Reusable Hats
Reusable Hats 01355 RH-Canadian Oval/Shell LG Landing
013628 RH-P - Square Pourhole ow
015080 RH-P - Untrimmed
Makaha Reusable Hats
01362 RH-N/NS
Maui ow
Dixie
www.poliformasplasticas.com.mx 31
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Floating)
Designer
Topaz Sun Fluted - Large La Paz
For use with 22 inch decks.
Little Diamond
www.poliformasplasticas.com.mx 32
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Drop-In)
Drop-In
ts through a cut-
drop-in Lavatory bowls, this section includes some drop-in bar bowls.
www.poliformasplasticas.com.mx 33
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Drop-In)
Drop-In
wl - 16 x 19” Opal Omni
www.poliformasplasticas.com.mx 34
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Drop-In)
Drop-In
Topaz Mississippi
Hexagon
www.poliformasplasticas.com.mx 35
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Lavatory Bowls (Undermount)
Undermount
These standard and designer model bowls are mounted underneath the vanity. Gruber has a complete
line of Speedy Plugs for your convenience that are especially designed for each bowl.
Diplomat (Fab US) 17” Fluted SS (Solid Surface) 19” Wave
www.poliformasplasticas.com.mx 36
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Pedestal Lavatories
Bowl and Pedestal Base Molds
Gruber pedestal molds include the bowl and pedestal as a matched set.
le
www.poliformasplasticas.com.mx 37
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Pedestal Lavatories
Bowl and Pedestal Base Molds
www.poliformasplasticas.com.mx 38
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Sinks (Kitchen and Bar)
Bar Bowls and Sinks
Gruber is committed to supplying the largest variety of kitchen sinks available anywhere. Kitchen sinks
erings.
www.poliformasplasticas.com.mx 39
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Sinks (Kitchen and Bar)
Singles and Doubles
www.poliformasplasticas.com.mx 40
servicio_clientes@poliformasplasticas.com.mx
Lavabos y Tarjas
Sinks (Kitchen and Bar)
Triples, Drop-Ins and Country Sinks
Triple Sink - 41 x 19” Single Sink (Drop In) - Double Sink Drop In -
22 x 20” 34 x 20”
www.poliformasplasticas.com.mx 41
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 42
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
110 Series
110 Series - Waikiki NS Modular 110 Series - Waikiki NS Modular (continued)
Part Number Description A
Lightweight Female 1/2”
ow 25”
404519 ULFF-N/NS-25 25”
404529 ULFF-N/NS-31 31”
ow 31”
404539 ULFF-N/NS-37 37”
404319-1 ULFF-N/NS-43 43”
404329 ULFF-N/NS-49 49”
404339 ULFF-N/NS-61 61”
404399 ULFF-N/NS-61 DB30 61”
404669 ULFF-N/NS-61 DB36 61”
Part Number Description A
Male 110 Series - Hilo (With Soap Dish)
20431 110-NS-25 25”
20432 110-NS-31 31” Modular
20433 110-NS-37 37”
20437 110-NS-43 43”
20441 110-NS-49 49”
20442 110-NS-61 61”
20445 110-NS-61-DB30 61”
Permanent Hats
00284 PH-N/NS
ow
00283 PH-N/NS Square Hole
002831 PH-N Square Hole - Oversized
002560 PH-N Texas
002512 PH-N Texas No Faucet Landing Part Number Description A
00281 PH-N/X Square No Faucet Landing Male
00341 PH-COMP-N 20578 110-WSD-49 49”
ow Permanent Hats
Reusable Hats 00231 PH-WSD
01362 RH-N/NS ow
013622 RH-N/NS Square Oversize Reusable Hats
013622N RH-N-N Square 01379 RH-WSD
ow ow
End Splashes 01465 RH-WSD - Untrimmed
22702 160-2 - 12-Cavity 4 x 21”
227021 160-2 - 2-Cavity 4 x 21” (Right & Left) End Splashes
FFO Female 22702 160-2 - 12-Cavity - 4 x 21”
404518 FFO-N/NS-25 25” 227021 160-2 - 2-Cavity - 4 x 21” (Right & Left)
404528 FFO-N/NS-31 31” FFF Female
404538 FFO-N/NS-37 37” 400237 FFF-108 Hilo WSD
404568 FFO-N/NS-43 43” ow
404598 FFO-N/NS-49 49”
404599 FFO-N/NS-61 61”
404600 FFO-N/NS-61 DB30 61”
FFF Female
400287 FFF-108 N/NS
ow
400357 FFF-108 N Support
40009 FFF-108 N/NS Accucast
ow
ow
FFL Female
404314 FFL-N/NS-43 43”
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 43
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
110 Series
110 Series - Royale Large (RL) Modular 110 Series - Super Bowl I RRSD Modular
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 44
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
110 Series
110 Series - Newport L Modular
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 45
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
111 Series
111 Series - Laguna N Modular 111 Series - Laguna N Modular (continued)
Part Number Description A
End Splashes
22703 160-3 - 12-Cavity 4 x 21-1/4”
22710* 160-10 - 4-Cavity 4 x 21-1/4”
22723 160-16 - 6-Cavity 4 x 21-1/4”
* Note: This mold has square ends, and is not for use with post-
formed backs. Use for non-integral (no backsplash) applications only.
FFF Female
400287 FFF-108 N/NS
ow
400357 FFF-108 N/NS Support
Part Number Description A 40009 FFF-108 N/NS Accucast
Male ow
20751 111-N-25 25’’ ow
20784 111-N-28 28’’ FFL Female
20752 111-N-31 31’’ 407514 FFL-111-N-25 25’’
20753 111-N-37 37’’ 407524 FFL-111-N-31 31’’
20756 111-N-43 43’’ 407534 FFL-111-N-37 37’’
20759 111-N-49 49’’ 407564 FFL-111-N-43 43’’
20758 111-N-55 55’’ 407594 FFL-111-N-49 49’’
20760 111-N-61-RB 15-1/2 61’’ 407624 FFL-111-N-61 61’’
20761 111-N-61-LB 15-1/2 61’’ 407634 FFL-111-N-61 DB30 61’’
20762 111-N-61 61’’ FFO Female
20763 111-N-61-DB30 61’’ 404518 FFO-N/NS-25 25’’
20771 111-N-61-DB36 61’’ 404528 FFO-N/NS-31 31’’
20767 111-N-73-DB36 73’’ 404538 FFO-N/NS-37 37’’
20768 111-N-73 73’’ 404568 FFO-N/NS-43 43’’
20769 111-N-73-DB42 73’’ 404598 FFO-N/NS-49 49’’
20770 111-N-85-DB42 85’’ 404599 FFO-N/NS-61 61’’
20766 111-N-86 86’’ 404600 FFO-N/NS-61 DB30 61’’
20780 111-N-120 120’’ 404601 FFO-N/NS-73 73’’
20783 111-N-120-DB48 120’’ Lightweight Female 1/2”
Permanent Hats ow 25’’
00284 PH-N/NS 404519 ULFF-N/NS-25 25’’
ow 407849 ULFF-N/NS-28 28’’
00283 PH-N/NS Square Hole 404529 ULFF-N/NS-31 31’’
002560 PH-N Texas ow 31’’
002512 PH-N Texas - No Faucet Landing 404539 ULFF-N/NS-37 37’’
00281 PH-N/X Square - No Faucet Landing 404319 ULFF-N/NS-43 43’’
002831 PH-N Square Oversized 404329 ULFF-N/NS-49 49’’
00341 PH-COMP- N 404339 ULFF-N/NS-61 61’’
ow 404379A ULFF-N/NS-61-LB 15-1/2 61’’
Reusable Hats 404389A ULFF-N/NS-61-RB 15-1/2 61’’
01362 RH-N/NS 404399 ULFF-N/NS-61-DB30 61’’
013622 RH-N/NS Square Oversize 404349 ULFF-N/NS-73 73’’
013622N RH-N-N Square 404604 ULFF N/NS-73-DB36 73’’
ow
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 46
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
111 Series
111 Series - Waikiki NS Modular 111 Series - Waikiki NS Modular (continued)
Part NumberDescription A
Lightweight Female 1/2”
ow 25’’
404519 ULFF-N/NS-25 25’’
404529 ULFF-N/NS-31 31’’
ow 31’’
404539 ULFF-N/NS-37 37’’
404339 ULFF-N/NS-61 61’’
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 47
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
111 Series
111 Series - Newport L Modular 111 Series - Malibu CC Modular
(continued)
Part NumberDescription A
Female FFO
406518 FFO-111-L-25 25’’
406528 FFO-111-L-31 31’’
406538 FFO-111-L-37 37’’
406568 FFO-111-L-43 43’’
406598 FFO-111-L-49 49’’
406628 FFO-111-L-61 61’ Part Number Description A
Lightweight Female 1/2” Male
406519 ULFF-111-L-25 25’’ 20615 111-CC-25 25’’
406529 ULFF-111-L-31 31’’ 20616 111-CC-31 31’’
406539 ULFF-111-L-37 37’’ 20617 111-CC-37 37’’
406569 ULFF-111-L-43 43’’ 20619 111-CC-49 49’’
406599C ULFF-111-L-49 49’’ 20630 111-CC-BANL65
406629C ULFF-111-L-61 LH 15-1/2 61’’ 20631 111-CC-24-BANR65
406639C ULFF-111-L-61 RH 15-1/2 61’’
Permanent Hats
406649C ULFF-111-L-61 DB 30 61’’
00223 PH-CC
406659 ULFF-111-L-61 61’’
ow
002231 PH-CC 109
Reusable Hats
01367 RH-CC
ow
End Splashes
22703 160-3 - 12-Cavity - 4 x 21-1/4”
22710 * 160-10 - 4-Cavity - 4 x 21-1/4”
22723 160-16 - 6-Cavity - 4 x 21-1/4”
* Note: This mold has square ends, and is not for use with post-
formed backs. Use for non-integral (no backsplash) applications only.
Female FFF
400147 FFF-108 CC Malibu
ow
400367 FFF-108 CC Malibu Support
40014MA FFF-108 CC Malibu Accucast
ow
Female FFO
406158 FFO-111-CC-25 25’’
406168 FFO-111-CC-31 31’’
406178 FFO-111-CC-37 37’’
Lightweight Female 1/2”
406169 ULFF-CC-31 31’’
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 48
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 49
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
119 Series
119 Series - Catalina SL Modular 119 Series - Monterey LN Modular
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 50
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
119/217 Series
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 51
servicio_clientes@poliformasplasticas.com.mx
Cubiertas para Lavabos
Modular Decks
End Splashes
22707 160-7 - 2-Cavity - 4 x 18-1/4”
Female FFF
400587 FFF-108 LN/LNS
ow
40017MA FFF-108 Accucast
Female FFO
414518 FFO-LN/LNS-25 25”
414528 FFO-LN/LNS-31 31”
414538 FFO-LN/LNS-37 37”
414568 FFO-LN/LNS-49 49”
Lightweight Female 1/2”
414519 ULFF-LN/LNS-25 25” Part Number Description
414529 ULFF-LN/LNS-31 31” Male
414539 ULFF-LN/LNS-37 37” 64249 22” Corner Vanity
414549 ULFF-LN/LNS-43 43”
414569 ULFF-LN/LNS-49 49” Female
842499 ULFF-22” Corner Vanity
Modulars may be ordered with a weight-saving gate. To order with this c ration, add a 3 after the part number.
www.poliformasplasticas.com.mx 52
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
110/111 Series
www.poliformasplasticas.com.mx 53
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
111 Series
111 Series Chamfer 111 Series 23”
www.poliformasplasticas.com.mx 54
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
119 - 136 Series
119 Series Dripless Edge 129 Series
128 Series
Part Number Description Length
22276 135-NB-120 120”
22277 135-NB-146 146”
www.poliformasplasticas.com.mx 55
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
137 - 217 Series
137 Series 138 Series Drop OG
146.00 in
A
A 1.50 in
Part Number Description Length 22.50 in
139 Series
Part Number Description Length
22287 138-NB-144 144”
22291 138-25-NB-144 144”
222871 138-Banjo Plug Left
222872 138-Banjo Plug Right Part Number Description Length
Divide rs 222883 139-NB-37 Texas OG 37”
01067 Yellow Divider 25” 138-OG Front 222885 139-NB-49 Texas OG 49”
010671 Yellow Divider 25” 138-OG Right 22288 139-NB-146 Texas OG 146”
010671R Black Divider 25” 138-OG Right 22290 139-30-NB-146 Texas OG No Backsplash 146”
010672 Yellow Divider 25 138-OG Left Dams
010672R Black Divider 25” 138-OG Left 22288D 139-NB-146 Texas OG Dam
010673 Yellow Divider 25” 138-OG Double 010722 Yellow Divider Dam 139-OG 144 x 1-1/4”
010673R Black Divider 25” 138-Double OG
01067R Black Divider 25” 138-OG Front D i v i de r s
01071 Yellow Divider 138-OG Right 010701R Black Divider 139-30 Double
010712 Yellow Divider 138-Front OG 010702R Black Divider 139-30 Right
010712R Black Divider 138-Front OG 010703R Black Divider 139-30 Left
01071R Black Divider 138-OG Right 010713 Yellow Divider 139-OG Front
01072 Yellow Divider 138-OG Left 010713R Black Divider 139-OG Front
01072R Black Divider 138-OG Left 010714 Black Divider 139 Double
010721 Yellow Divider 138-OG Double 010725 Yellow Divider 139-OG 144 x 1”
010721R Black Divider 138-Double OG 010725R Yellow Divider 139 144 x 1”
010723 Yellow Divider 138-OG 144” x 1/4” End Splashes
010724 Yellow Divider 138-OG 144” x 1” 22728 160-21 - 6-Cavity 139-Texas OG
01072R Black Divider 138-OG Left
End Splashes 217 Series
22724 160-17 - 6-Cavity 138
22732 6-Cavity End Splash 138-25
www.poliformasplasticas.com.mx 56
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
218 - 422 Series
218 Series 223 Series
www.poliformasplasticas.com.mx 57
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
440 Series Solid Surface Molds
440 Series Solid Surface 440 Series Solid Surface with Small
Backsplash
www.poliformasplasticas.com.mx 58
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
522 - 540 Series
www.poliformasplasticas.com.mx 59
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
540 - 630 Series
540 Series Bluntnose 630 Series 1-3/8” Bullnose
www.poliformasplasticas.com.mx 60
servicio_clientes@poliformasplasticas.com.mx
Cubiertas
“No Bowl” Decks
636 - 642 Series
636 Series 1-3/8” Bullnose
www.poliformasplasticas.com.mx 61
servicio_clientes@poliformasplasticas.com.mx
Páneles, Pisos y Paredes
Wall Panels
NEW!
3/4” depth
Applications:
• Shower or bath enclosures
• Wall panels
• Flooring and stair steps
• For kitchens, baths or living areas, as well
ce, hotel and
motel applications
ts:
• Workable sheet stock is easily fabricated
and installed
nite color, material and veining options
for a custom “look”
• Familiar sheet stock size
Close-Up View
• Rigid, durable material
• Highly durable and stable Note: Texture does not match the Slate Tile Panel Mold (PN 26129).
• Insulative material capability
www.poliformasplasticas.com.mx 62
servicio_clientes@poliformasplasticas.com.mx
Páneles, Pisos y Paredes
Wall Panels
Part Number Description Width (A) Width (B) Width (C) Length (D)
22747 3-Cavity Panel 33 / 60 / 33” 33” 60” 33” 60”
22736 3-Cavity Panel - 32-1/2” / 60-1/2 / 32-1/2” 32-1/2” 60-1/2” 32-1/2” 64-1/2”
22744 3-Cavity Panel - 33 / 60 / 33” 33” 60” 33” 66”
www.poliformasplasticas.com.mx 63
servicio_clientes@poliformasplasticas.com.mx
Páneles, Pisos y Paredes
Wall Panels
www.poliformasplasticas.com.mx 64
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders To order, call: 817) 295-4333
Style 1 - 2”
PN 22933
Total
Depth
3/4”
1.9cm 128.00
2.00
60.00
Style 1 - 6” (15.2cm)
6 in
15.2cm 2.00 Each mold includes
42.00
• Four full length (124”) cavities
• One partial length (60”) cavity
• Eight matching (6”) Rosettes
5/8”
1.6cm 2.00 2.00
Edge
Depth 124.00
Total
Depth
3/4”
1.9cm 128.00
124.00 Style 1 - 4” (10.1cm)
2.00 76.00 2.00 2.00
Each mold includes
4 in • Four full length (124”) cavities
10.1cm
32.00 • One partial length (76”) cavity
• Eight matching (4”) Rosettes
5/8”
1.6cm
Edge 2.00
Depth
Style 1 - 2” (5.08cm)
Depth
3/4”
1.9cm
21.75” Each mold includes
55.25cm
2 in
5cm
• Four full length (123.75”) cavities
123.75”
• One partial length (90”) cavity
5/8”
1.6cm
314.33cm
• Eight matching (2”) Rosettes
Edge
127.63”
Depth 324.2cm
www.poliformasplasticas.com.mx 65
servicio_clientes@poliformasplasticas.com.mx
s
Rope Trim
Rope Trim (ABC) Rope Trim 3”
erent 4-cavity
gurations:
“A”, “B” or “C” Styles - 4 cavity mold with each cavity being the
ed below.
“ABC” Style - 4 Cavity mold containing 2 of the “A” cavities, 1 “B”
cavity, and 1 “C” cavity - each cavity as listed below.
Part Number Description Length (A)
Male
22691 4-Cavity Rope Trim 3" x 96" x 3/8" 96"
7/8" (22 mm)
26171 4-Cavity 3-1/4" x 3-1/4" Rosette 96"
1 1/2" (38 mm)
Side view
Rosettes
3/8" (9 mm) Section
www.poliformasplasticas.com.mx 66
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders
Assorted Trim
TM-1 Trim TM-5 Trim Trim A
Part Number Description - Length (A) Part Number Description - Length (A) Part Number Description - Length (A)
Male Male Male
22925 TM-1 Trim 2-Cavity - 96" 22733 TM-5 Trim 2-Cavity 120" 22820 180-20 Trim A Inside Corner
6-Cavity - 120”
TM-2 Trim TM-6 Trim 22814 180-14 Combination (ABC)
Trim 100” - (2) A + (2) B + (1) C
Cavities
Trim B
Part Number Description - Length (A) Part Number Description - Length (A)
Male Male
22926 TM-2 Trim Single Cavity - 96” 22928 TM-6 Trim Single Cavity 120"
Trim C
Part Number Description - Length (A) Part Number Description - Length (A)
Male Male
22927 TM-3 Trim 2-Cavity - 144" 22930 TM-7 Trim 2-Cavity - 121"
TM-4 Trim
www.poliformasplasticas.com.mx 67
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders
Assorted Trim
Inside Corner Trim Outside Corner Trim Door Jam Trim
88 223.5cm
37 94cm 37 94cm
www.poliformasplasticas.com.mx 68
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders
Sill Molds
3/4” Sill Molds - 2-Cavity 3/4” Sill Molds - 5-Cavity
PN 22874
WIDTH INSIDE
Width Width
Part Number Description Overall Inside Length
Male
228185 180-18 5" Sill 122" 5" 3-7/8" 122"
PN 22818
22818 180-18 10" Sill 122" 9-3/4" 8-3/4" 122"
228183 180-18 10" Sill 73"* 9-3/4" 8-3/4" 73"
22874 180-18 12" Sill 146" 12" 10-7/8" 146"
22873 180-18 24" Sill 146" 24" 23" 146"
228181 180-18 10" Sill 2-Cavity 25"/37"* 9-5/8" 8-5/8" 25 & 37"
PN 228185 228182 180-18 10" Sill 2-Cavity 49"/61"* 9-3/4" 8-3/4" 49 & 61"
Dividers
01086 Yell. Div. Window/Sill 180-18 * includes metal door
www.poliformasplasticas.com.mx 69
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders
70 178cm
78 198cm
78 198cm
4 10cm
4 10cm
R 3/8 1cm Full size section thru the panel edge, showing the raised border
R 3/8 1cm Full size section thru the panel edge, showing the raised border
typical on two edges.
typical on two edges.
PN 227440 PN 227441
PN 227442 PN 227443
45 114cm
37 94cm
78 198cm
78 198cm
4 10cm
4 10cm
R 3/8 1cm
Full size section thru the panel edge, showing the raised border 3/8 1cm Full size section thru the panel edge, showing the raised border
typical on two edges. typical on two edges.
3/4 2cm
3/4 2cm
3/8 1cm
3/8 1cm
F ll i i h h l d h i h i db d i l d
www.poliformasplasticas.com.mx 70
servicio_clientes@poliformasplasticas.com.mx
Trims, Sills and Borders
78 198cm
8 20.3cm
4 10cm
3/4 2cm
3/8 1cm
Full size section thru the panel edge, showing the raised border
typical on two edges.
PN 227444 PN 227445
PN 227446
124 315cm
21 53cm
8 20cm
www.poliformasplasticas.com.mx 71
servicio_clientes@poliformasplasticas.com.mx
Accesorios para Baño
Bathroom Accessories
www.poliformasplasticas.com.mx 72
servicio_clientes@poliformasplasticas.com.mx
Accesorios para Baño
Bathroom Accessories
www.poliformasplasticas.com.mx 73
servicio_clientes@poliformasplasticas.com.mx
Accesorios para Baño
Bathroom Accessories
www.poliformasplasticas.com.mx 74
servicio_clientes@poliformasplasticas.com.mx
Accesorios para Baño
Bathroom Accessories
Toothbrush Holder
Part Number Description
Male
22868 Texas Corner Soap/Shampoo
Holder
Female Part Number Description
428688 F-Texas Corner Soap/ Male
Shampoo Holder 22823 180-23 Towel Bar Ends
Small Corner Soap Dish 180-27 Soap Dish Part Number Description
Male
22829 180-29 Toothbrush Holder
www.poliformasplasticas.com.mx 75
servicio_clientes@poliformasplasticas.com.mx
Accesorios para Baño
Bathroom Accessories
www.poliformasplasticas.com.mx 76
servicio_clientes@poliformasplasticas.com.mx
Moldes Varios
Miscellaneous Molds
Thresholds
Columns
Grecian Column 8” Round Column 4” Column
www.poliformasplasticas.com.mx 77
servicio_clientes@poliformasplasticas.com.mx
Moldes Varios
Miscellaneous Molds
Niche Molds
Bullnose Edge Niche
Create cultured marble or spray granite niches for add-on sales to your customers with this attractive niche mold from Gruber.
13 3/4"
3 1/8"
19 1/2"
4 7/8"
17 3/4"
29 1/2" 34"
28 1/4"
OG Edge Niche
Create cultured marble or spray granite niches for add-on sales to your customers
with this attractive niche mold from Gruber.
www.poliformasplasticas.com.mx 78
servicio_clientes@poliformasplasticas.com.mx
Moldes Varios
Miscellaneous Molds
Sample Molds
ers a full line of sample molds (male only) shapes for versatile presentations of your marble or solid surface line. Mount
them on a board or distribute individually. Samples may be made very economically by using left-over matrix from production.
The taper or radius edge produces an attractive product that requires ver g. Your company name, logo, or the color
rmanently cast into the sample.
www.poliformasplasticas.com.mx 79
servicio_clientes@poliformasplasticas.com.mx
Glosario
Terms of Sale
Notice Customer Services
All information contained in Gruber Systems, Inc. (“Gruber”) Advice and assistance on matters relating to the manufacture of
literature is accurate to the best of Gruber’s knowledge. cultured marble is available by telephone, telefax, or letter without
Suggestions are made without warranty or guarantee of results. ers this service free of charge, but
Before using any Gruber product, the user should determine without warranty. Please see the important Notice to Customer
the suitability of the product for its intended use (including section above. No collect calls will be accepted. Field consultation
t, and function). The service is available, on a fee plus expense basis, for onsite
user assumes the risk and liability in connection therewith, consultation. For complete information on all services available
notwithstanding any suggestions, advice, or assistance given by from Gruber, please contact your Gruber Representative.
Gruber.
Shipments and Delivery
Prices Unless otherwise agreed in writing by Gruber and the customer,
Catalog prices are subject to change without notice. Prices shown shipments will be made via the most reasonable methods as
ect as of the date of publication, FOB determined in the sole and absolute discretion of Gruber. Gruber
ect upon will have the sole and absolute discretion to select the method
the date of receipt of order. If in doubt, please write or call for a of shipment, routing of shipment, point of origin of shipment,
current quotation. Prices do not include sales, use, license, excise, and selection of carrier. All shipments will be FOB Shipping
or other taxes with respect to the manufacture, sales, delivery, and Point. Shipping and delivery dates are estimates only, based on
export duties of the goods, all of which are the sole responsibility factors in existence at the time such estimates are made. Each
of the Customer. delivery will be deemed to be a separate sale, and the customer
will make payment on Partial deliveries. Gruber will not be liable
Proprietary (Custom) Molds for damages due to the delay in, or the inability to complete,
Price adjustments also apply to all Proprietary (Custom) Molds culties,
which Gruber manufactures. weather, Acts of God, governmental acts or regulations, shipping
delays, inability to obtain equipment or materials from sources
Service Charges of supply, or any other cause whatsoever beyond the reasonable
A service charge in the amount of $25.00 will be charged for orders control of Gruber. The customer will pay Gruber reasonable
less than $75.00. storage and handling charges for shipments that are delayed on
account of the customer, and such shipments will be stored at the
Taxes customer’s risk.
Prices shown in the Price List do not include any taxes. All
applicable taxes will be the sole responsibility of the customer. Damages and Risk of Loss
All risk of loss or damage and all incidents of title and ownership
Terms/Payment will pass to the customer upon Gruber’s delivery of the goods to
(A) C.O.D. - U.S. Accounts the carrier (FOB Shipping Point), even though Gruber may have
Unless otherwise agreed in writing by Gruber and the selected the carrier. In no event will Gruber be liable for any loss
customer or unless prepaid, all orders will be shipped C.O.D. ts or incidental or
All carriers charge an additional service charge for handling consequential damages, that result after Gruber delivers the goods
C.O.D. shipments, which charge will be the sole responsibility to the carrier or during the shipping of goods. For any such loss
of the Customer. or damage, Gruber will have no responsibility whatsoever, and the
(B) Prepayment customer will be responsible for initiating and processing all claims
Orders received with a prepayment check will be given a directly with the carrier.
discount of 1% on the order net balance, excluding taxes,
crating, duties, shipping, special handling and freight charges, Cancellation of Orders
and other similar charges. Discounts do not apply to master (A) Standard molds and stock supplies.
tooling charges, engineering/consultant fees, training Cancellation of orders for standard molds and stock supplies
services, or contract agreements for customer designed must be made at least 48 hours prior to the shipping date.
production systems or other similar charges. Prepaid orders Orders canceled after that time will be subject to a 15%
are those for which the full amount of all charges, except restocking charge, plus the cost of freight and handling
freight, are paid prior to entry of the order into Gruber’s charges, if the product has been shipped.
production/shipping schedule. Prepaid orders will not be
(B) Manufacturing equipment and special orders.
processed until payment for the full amount is received.
In the event that a customer cancels an order for engineered
(C) Other system components, product especially fabricated for the
Any other method of payment will be in accordance with customer, or goods that are not regularly carried by Gruber,
Gruber’s payment policies. Any credit sale is subject to the the customer will be responsible for paying the agreed
nance charge price of such goods as are completed as well as of such
equal to the highest amount allowed by law will be added goods as are in the process of being engineered, fabricated,
to the amount due on all invoices that are not paid within manufactured, assembled, or ordered at the time Gruber
the stated time. All payments will be made in United States receives the customer’s cancellation.
currency. If the customer fails to comply with any of the
terms and conditions of this instrument, Gruber may withhold
further deliveries. Gruber may suspend performance or
require cash payment or C.O.D. or adequate security at any
time when, in Gruber’s sole and absolute discretion, the
nancial condition of the customer or other factors warrant
such action.
www.poliformasplasticas.com.mx 80
servicio_clientes@poliformasplasticas.com.mx
Glosario
Terms of Sale
Indemnity Class B Product
Must be reported immediately by the customer to the
cations, the customer will transportation company and to Gruber. The customer is
cers, and employees
harmless from and against all liabilities, losses, claims, causes the transportation company. Gruber is not liable for any loss or
of action, penalties and expenses, including but not limited to damage that occurs after Gruber delivers the goods to the carrier.
attorneys’ fees and costs, imposed on, incurred by, or asserted
Class C Product
of bodily injury or death or property damage or destruction or Freight prepaid by the shipper (customer) will be accepted by
on account of infringement of any design patent, utility patent, Gruber for inspection and evaluation. If evidence of a defect that
design, copyright, tradename or trademark, existing or hereafter is covered by a Gruber warranty is found, or an error in shipment
issued, directly or indirectly arising out of such requests, plans, or has been made, Gruber will have the option of either repairing
ed goods, or or replacing the product at Gruber’s expense or of refunding
out of any alleged breach by Gruber of any implied or expressed the purchase price paid by the customer for the product. If
cally set forth no evidence of defect that is covered by a Gruber warranty or
in this instrument). The provisions of this paragraph are expressly shipping error is found, the product will be handled in accordance
cers, and employees with procedures as outlined in Class A, if the product is new,
and its successors and assigns, and will continue in full force and unused, and undamaged. If there is evidence of damage or
ect notwithstanding the termination of this instrument. defects not covered by a Gruber warranty, the product will be
handled in accordance with the procedures in Class D Product.
cations & Descriptions
All tolerances and dimensions for molds set forth in this catalog Class D Product
are based on plus or minus ¼” (.6 cm). All designs illustrated in the Freight prepaid by the shipper (customer) will be accepted by
guration, and Gruber for inspection and evaluation. After the product has
nished product or mold. All catalog products ed and advised of the
have been described accurately as of the publication date of this condition of the product. Product found to be repairable will
catalog. However, Gruber is constantly attempting to improve its be repaired with the cost borne by the customer. If the product
product and, therefore, reserves the right to improve, delete, or is deemed to be beyond repair, Gruber will dispose of it per the
add new products and to alter or change the products in any way, customer’s instructions, at the customer’s expense. If Gruber
without notice. receives no instructions from the customer to either repair or
dispose of the product within sixty (60) days after Gruber advises
Returned Product
the product, Gruber may make use of or dispose of the product
to fall within the following four categories: in any manner determined by Gruber, in Gruber’s sole and
CLASS A: New, unused, undamaged. absolute discretion, without any obligation to report to the
CLASS B: New, unused, lost or damaged in transit. customer (including but not limited to the obligation to pay any
CLASS C: New, unused, defective product. consideration to the customer or the obligation to report to the
CLASS D: Used, returned for evaluation and/or repair. customer), and all rights to such product will belong solely and
This policy on returned product does not apply to custom molds exclusively to Gruber. Please note that with respect to all of the
cations, particularly Classes A and C, it is essential
to repack product to protect it from damage in transit. Full
following general rules will be observed, with respect to the above
credit for returned product cannot be given unless it is received
cations:
in undamaged condition. Also, make sure the proper freight
c instructions are
cation is used on the returned shipment.
about product to be returned, Gruber will issue a Return Waiver
Authorization number. The R/A number must be clearly The waiver by Gruber of any term or condition herein stated will
marked on each of the returned packages or crates. The R/A not be construed to be a waiver of any other term or condition
number will be recorded at Gruber with the customer’s name, hereof, nor will such waiver be deemed a waiver of subsequent
the class of product to be returned, reason for return, and the breach of the same term or condition, nor will it be deemed a
disposition that Gruber is to make of it when it arrives. waiver or any term or condition in any subsequent instrument.
(2) Unless prior written authorization has been given by Gruber,
collect shipments will not be accepted for returned product. Severability
(3) Please take note: Common carriers levy freight charges based In the event any provision of the instrument is held to be invalid or
on the type and weight of freight being transported, as unenforceable, the other provisions of this instrument will be valid
described in the Bill of Lading. To avoid any errors in freight and enforceable.
charges, describe on the Bill of Lading the contents of the
containers being shipped, using the National Motor Freight Entire Agreement
cation descriptions and class/rate numbers, which you rms the sole and entire agreement between
nd included with your Return Authorization. Gruber and the customer and none of the terms and conditions
ed, or altered
Class A Product except by written instrument signed by the President/CEO or chief
Freight prepaid by the shipper (customer) will be accepted for legal executive of Gruber Systems Inc. and the customer. There are
credit to the customer’s account if the product is still being sold no oral understandings, representations, or agreements relative to
by Gruber, and is found to be in original condition; subject to the subject matter of this instrument which are not fully expressed
a handling charge of 15% of the invoice price; 20% for other in this instrument.
products.
www.poliformasplasticas.com.mx 81
servicio_clientes@poliformasplasticas.com.mx
Glosario
Terms of Sale & Warranty
Governing Law Attorney’s Fees
The laws of the State of California will govern the validity, In the event that any suit in law or equity, arbitration, or other
interpretation, and enforcement of this instrument. The sole, formal proceeding is instituted by any part of this instrument, or
exclusive, and proper venue for any proceedings brought to to recover damages for breach thereof, the prevailing party shall
interpret or enforce this instrument or to obtain a declaration of be entitled to an award of it’s attorney’s fees and costs, including
the rights of the parties hereunder will be Los Angeles County, experts, incurred in connection with such action. If any collection
California. procedure is initiated against the customer to enforce any of
the customer’s obligations owing hereunder, which collection
procedure does not culminate in the commencement of any suit,
arbitration, or other formal proceeding, Gruber will be entitled
to recover from the customer, all costs, including but not limited
to attorneys’ fees, incurred by Gruber in connection with such
collection procedure.
Limited Warranty:
Gruber warrants that all of the products manufactured by it are free from manufacturing defects in
material and workmanship. Gruber represents that it has inspected in a reasonable manner all components
manufactured by others and used in Gruber products and Gruber warrants that those components are
free from manufacturing defects in material and workmanship that are detectable by such reasonable
inspection. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE
FOREGOING WARRANTIES ARE VOID IF THE PRODUCT HAS NOT BEEN USED, CARED FOR AND MAINTAINED
IN ACCORDANCE WITH GRUBER’S WRITTEN INSTRUCTIONS ACCOMPANYING THE PRODUCT OR IF THE
PRODUCT HAS BEEN OTHERWISE UNREASONABLY USED, NEGLECTED, MISHANDLED, OR IMPROPERLY
SERVICED OR STORED OR IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT OR OTHER CASUALTY.
No employee or representative of Gruber has authority to bind Gruber to any representation, promise
or warranty concerning Gruber products. Unless a representation, promise or warranty is set forth in
this instrument it is not enforceable by the customer. THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY
AGAINST GRUBER FOR BREACH OF ANY WARRANTY WILL BE FOR THE REPAIR OR REPLACEMENT OF
THE DEFECTIVE PRODUCT OR, AT GRUBER’S OPTION A REFUND OF THE PURCHASE PRICE PAID BY THE
CUSTOMER FOR THE PRODUCT UPON THE CUSTOMER’S RETURN TO GRUBER OF THE PRODUCT. NO OTHER
REMEDY, INCLUDING BUT NOT LIMITED TO COMPENSATION FOR PROPERTY DAMAGE, LOST PROFITS, LOST
SALES, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, WILL BE AVAILABLE TO THE CUSTOMER. Claims
under the foregoing warranties must be made by obtaining the prior return authorization and shipping
instructions from Gruber and returning the defective product in accordance with Gruber policy then in
ect. Gruber products are intended for sale to industrial and commercial customers only. This paragraph
nal expression of any and all warranty agreements between Gruber and
the customer notwithstanding any usage of trade, course of dealing or documents sent to Gruber by the
customer.
www.poliformasplasticas.com.mx 82
servicio_clientes@poliformasplasticas.com.mx
Glosario
Glossary
Drop-In Bowl Inhibitor polyesters to cure. It limits adhesion
Also referred to as a self-rimming lavatory. A substance designed to slow down or rst is
ts through a cut-out in prevent a chemical reaction. thoroughly cured. It may be removed by
ange that sanding or by rubbing with steel wool.
rests on the vanity top holding it in place.
Integral Bowl
A bowl that is cast as one piece with the Thermosets
Exothermic Heat vanity top. Materials that will undergo or have
Internally developed heat accompanying a undergone a chemical reaction by the
chemical reaction.
Iso action of heat, catalyst, ultra-violet light,
Abbreviated terminology for isophthalic etc., leading to a relatively infusible state.
Faucet Landing Area acid type resins and gel coats. Typical materials are aminos (melamine and
The area on the backside of the bowl that urea), most polyesters, alkyds, epoxies, and
xtures.
Location of Bowl phenolics. They are not reformable.
(As determined from the location of the
Fillers nished product as Thixotropic
Relatively inert organic or inorganic seen from a position facing the front of the A term describing materials more jelly-
materials which are added to plastics resins vanity top.) like at rest than when stirred or agitated.
ow characteristics, Right bowl: A bowl located on the right side Agitation (shear) reduces the gel and
to extend volume, and lower the cost of the of the vanity, the dimensions of which are ow characteristics.
article being produced. given as the distance from the center of the
drain to the right end of the vanity top. Tooling Gel Coat/Laminating Resin
Finished Edge/End Left bowl: A bowl located on the left side Special polyesters designed to give ultimate
The edge or end of a piece of cast polymer of the vanity, the dimensions of which are strengths and cure values for mold making.
that is gelcoated and has been cast in given as the distance between the center of
contact with the mold surface to achieve a
Undercut
the drain to the left end of the vanity top. Negative or reverse draft on the mold. Split
nished surface. Double bowl: A vanity top with two bowls molds are necessary to shape pieces that
Flash Point in which the dimensions are given as the are undercut.
The lowest temperature at which a distance between the center of the drain of
each bowl. Undermount Bowl
No bowl: A vanity top mold without a bowl. A separate bowl which is attached to the
near the surface of the substance being underside of the countertop.
tested. Mass
The quantity of matter contained in a
Viscosity
Flexural Strengths uid;
Determination of the load required to cause mass is measured in mils or inches thickness.
exing. Wax
Fumed Silica (Aerosil, Cabosil) Master (Plug) A mold release agent.
A very low weight thickening agent used in The permanent tool used to build molds for Wet Out
polyesters to increase thixotropic qualities. the manufacture of cast polymer parts.
The speed with which a reinforcing material
Gel Matrix (Batch, Mix) can be completely saturated with resin.
A partial cure stage of plastics resins in a The combined mixture of resin, catalyst, This rate is usually determined visually and
viscous, jelly-like state where the liquid ller materials. measured in elapsed time.
material starts to transform into a solid.
MEK Peroxide (MEKP)
Gel coat Abbreviation for Methy Ethyl Ketone
The protective, transparent surface layer Peroxide, a strong oxidizing agent (free
of polyester resin which is applied to the radical source) commonly used as the
mold. The gel coat becomes the sanitary, catalyst for polyester in the FRP industry.
glossy surface of the cast polymer product.
MEK Solvent
Gel Time Abbreviation for Methyl Ethyl Ketone, a
The length of time that a catalyzed colorless fammable liquid commonly used
polyester remains workable--- starts to in gun clean up procedures.
solidify.
Mil
Gelation lm thickness and
The formation of a gel.
(one mil = .001”)
Hot Pot
Catalyst is mixed with the gel coat or resin Styrene Monomer
in the material container prior to spraying, An unsaturated hydrocarbon, used in
as opposed to internal or external gun plastics. In polyester, it is a co-reactant
mixing. diluent.
Humidity Surfacing Agent
Moisture content of the air. A material that allows the surface of
www.poliformasplasticas.com.mx 83
servicio_clientes@poliformasplasticas.com.mx
Glosario
Terms
Accelerator Centipoise Gel
An additive that reduces the gel and curing Measurement of viscosity as compared to A partial cure stage of plastics resins in a
time of thermosetting plastics such as water (1 centipoise). viscous, jelly-like state where the liquid
polyester gel coat and resin. Also called material starts to transform into a solid.
promoter or activator. Cobalt
Used as the accelerator for Methyl Ethyl Gel coat
Acetone Ketone Peroxide catalyzed polyesters. The protective, transparent surface layer of
In an FRP context, acetone is primarily polyester resin which is applied to the mold.
useful as a cleaning solvent for removal of Crazing The gel coat becomes the sanitary, glossy
uncured resin from applicator equipment Cracking of the resin due to internal stress. surface of the cast polymer product.
and clothing. VERY FLAMMABLE LIQUID. Cross-Linking Gel Time
Activator The process of bridging two polymer The length of time that a catalyzed
See Accelerator. chains, which converts a thermoplastic to a polyester remains workable--- starts to
thermoset. solidify.
Additive
Substance added to the resin mix to Cure Gelation
impart special performance qualities, such The polymerization of the transforming The formation of a gel.
as ultraviolet absorbers retarding from the liquid to the solid state with
materials (antimony trioxide, chlorinated maximum physical properties, including Hot Pot
waxes). hardness. Catalyst is mixed with the gel coat or resin
in the material container prior to spraying,
Air Dry Cure Time as opposed to internal or external gun
To cure at room temperature with the The time required for the liquid resin to mixing.
addition of catalyst but without the reach a polymerized state after the catalyst
assistance of heat and pressure. has been added. Humidity
Moisture content of the air.
Alligatoring Cut-Out
Wrinkling of the gel c resembling The hole lef ty top Inhibitor
alligator hide. created by casting around a plug. The A substance designed to slow down or
cut-out is used to accommodate either an prevent a chemical reaction.
Backpour undermount or drop-in bowl or bathtub.
The second pour or casting of cast polymer Iso
matrix into the female mold that creates the Delamination Abbreviated terminology for isophthalic
proper wall thickness of the product. The separation of a laminate into layers acid type resins and gel coats.
owing to the failure of adhesion of the
Barcol Hardness binder or failure of c r. Mass
A determination of hardness of a polyester The quantity of matter contained in a
using a Barcol Impressor. Density y. In reference to polyesters,
Weight per unit of volume, usually mass is measured in mils or inches thickness
Cast Polymer expressed as pounds per cubic foot. g.
A generic term referring to cast man-made
material created by combining catalyzed Dimensions Master (Plug)
polyester resin with inor (As measured from a position facing the The permanent tool used to build molds for
color pigments. front, leading edge of the product) the manufacture of cast polymer parts.
www.poliformasplasticas.com.mx 84
servicio_clientes@poliformasplasticas.com.mx
Glosario
Terms
Net Wt. of Mold ha te melting point. Used in
The approximate weight of the mold prior reinforced products to surround and hold
to packaging for shipment. The weights s. Most resins are polymers.
of the same mold may vary slightly due
RTM (Resin Transfer Molding)
to the w erences of the wood
Intermediate process of using matched
substructure.
molds (similar to match metal die) at low
Ortho pressure and heat.
Abbreviation for orthophtalic acid type
Shelf Life
resins and gel coats. The length of time an uncatalyzed polyester
Parting Agent remains workable while stored in a tightly
See Mold Release. sealed container.
www.poliformasplasticas.com.mx 85
servicio_clientes@poliformasplasticas.com.mx
Conoce la red comercial de productos para Resinas Poliéster Barnices
Fibra de Vidrio Pegamentos
el plástico reforzado más grande del país. Gel-Coats Cargas
Catalizadores Desmoldantes
• Desarrollo de productos especializados. Espuma de Poliuretano Pastas Resanadoras
• Venta de equipos y herramientas. Moldes de Polietileno Impermeabilizantes
• Representantes de las mejores marcas a nivel mundial. Pigmentos Herramentales
• Y más de 4 000 productos. Pinturas Abrasivos
Cauchos de Silicón
• Suc. Neza
Tel y Fax: 5738 9052
• Suc. Chalco
Tel y Fax: (55) 1734 4151
• Suc. Ecatepec
Tel y Fax: 2234 2625
www.poliformasplasticas.com.mx
servicio_clientes@poliformasplasticas.com.mx