Documente Academic
Documente Profesional
Documente Cultură
1000
1000
1000 1000 1000
474
Handrail clamp S 438 440 442
500
500
500
294 294
2100
2100
438 436 434
353
474
1000
1000
System overview
b a
Handrail clamp S
230
292
1524 732 1524 878 1524 878 1524 728 1524
384
438
Doka beam H20 eco P
d3 screw jack U-head Doka beam H20 eco P C
A
-1.20-
-1.20-
Scaffold Tubes By Site
-1.20-
F NOTES:
-1.20-
-1.20-
Diagonal cross 12.100
-1.20-
Back Stay By Site Back Stay By Site B
-1.20-
-1.20-
-1.20-
-1.20-
Tower form
-1.20-
HT. = 6.00m
Back Stay By Site
5560
5682
d3 safety hook
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
HT. = 9.00m
8560
C
8682
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
Secures the d3 screw jack U-head or screw jack foot to
384
the d3 frame
452
98116-201-01
-1.20-
-1.20-
▪ when the towerframes are assembled in the horizon-
-1.20-
tal
▪ when the towerframes are lifted by crane
Multi-purpose waling WU12
-1.20-
-1.20-
General remarks:
Spindle strut T7 150/200cm
▪ The gravity latches of the frame must always point
Multipurpose waling WS10
upwards.
a ... Inter-frame spacing = 60* / 100 / 150 / 175 / 200 / 250 / 300 cm
b ... Frame width = 152 cm
-0.90-
d3 screw jack foot
-0.90-
3000
2200
Foundation according to statical requirements by contractor.
- Necessary camber according to the planning information have to be considered when levelling the
formwork.
A A Calculation criteria
1500-2100
300
-0.90-
-0.90-
-1.20-
-1.20-
The stated reaction forces are actual unfactored characteristic loads (ɣ=1)!
SCALE FIRST CASTING 1:40
The transfer of the forces into the structure and the stability of the overall construction, must all
Back Stay By Site ! be verified by the structural designer.
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
-1.20-
10860
10982
-1.20-
-1.20-
-1.20-
850
-1.20-
-1.20-
-1.20-
Client:
APPROVAL DRAWING
Yapi Merkezy
500
not valid for execution
-1.20-
-1.20-
-1.20-
Approved by site
for execution: Date, Name, Signature
850
A A Drawn: ILYAS POOLAKKAL 01.07.2020 Drawing-No.: Rev.:
-1.20-
-1.20-
-1.20-
-0.90-
-0.90-
www.doka.com
This drawing is based upon the technical data and original DOKA products, or such products which are explicitely designated herein.
We can only warrant for DOKA products on the condition that they are used according product specification.
The unauthorized use, reproduction or processing of this drawing is forbidden, subject to penalty and subject to payment of damages.
This drawing must not be communicated neither to third parties nor to competitor companies. Subject to technical alterations.
To avoid risks regarding Health & Safety of users or third persons, "User Information", "Operating Instructions" and
Section A-A PLAN: PIER CAP FORMWORK - FRAMI X-LIFE "Fitting Instructions" have to be noted in addition to the information given on the drawings.
Scale 1:60 SCALE 1:40 If required ask your Doka partner for these documents. http://www.doka.com/downloadcenter/
SECOND CASTING
Scaffold boards for platforms and railings must be fixed according to Health & Safety regulations and local law!