Documente Academic
Documente Profesional
Documente Cultură
Special advantages
• self-amalgamating innerwrap
• proven corrosion protection
technology
• for high mechanical stresses and
highly corrosive environments
Description
DENSOLEN-System AS39P-R20HT
Butyl rubber adhesive
• Mechanically highly resistant tape
PE backing
system (stress-class C-50 PE backing
PE - butyl rubber
(coextruded) PE - butyl rubber (coex.)
according to DIN EN 12068)
Butyl rubber adhesive
• Sleeve-type coating due to
Butyl rubber adhesive
amalgamation of innerwrap tape
• Practically impermeable to water
DENSOLEN-Tape AS39P DENSOLEN-Tape R20HT
vapour and oxygen.
• 3-ply plastics tape with stabilised • 2-ply plastics tape with stabilised
• Resistant to soil bacteria and soil
polyethylene backing and butyl polyethylene backing and butyl
electrolyte
rubber adhesive layers on both rubber adhesive on one side.
• Compatible with coatings from PE,
sides. • Mechanically highly resistant by
PP, FBE, PU, CTE and Bitumen.
• Fully amalgamating within overlap HDPE backing.
area. • Excellent bonding between
The DENSOLEN-System
• Highly conformable to any surface adhesive and carrier film via
AS39P / R20HT consists of
structure by thick grey butyl rubber co-extruded intermediate layer.
layer facing pipe surface.
DENSOLEN-Primer
• Excellent bonding between
• Solvent based priming solution.
adhesive and carrier film via co-
extruded intermediate layer
Use
• For site and yard wrapping of metal • For corrosion protective wrapping • Tape application by hand (tape
pipes or underground steel of bare pipe joints and bare bends width ≤ 50 mm) or by wrapping
pipelines, including spiral-and where the pipes have already machines (manually operated or
seamwelded pipes. received a factory coating. motor driven).
Properties
DENSOLEN-Tapes AS39P and R20HT, Typical Values
Property Unit AS39P R20HT Standard
carrier film - black black, white or yellow -
Colour adhesive inner layer - grey black -
adhesive outer layer - black - -
tape mm ≥ 0,8 ≥ 0,5 ISO 4591
Thickness
carrier film mm app. 0,28 app. 0,3 ASTM D-1000
Elongation at break % ≥ 600 ≥ 500
Tensile strength 23°C N / 10mm ≥ 100 ≥ 65 DIN EN 12068
Modulus at 10% elongation N / 10mm ≥ 28 ≥ 40
Dielectric strength kV / mm 35 35 ASTM D 149
Water absorption at 23°C after 1 day % ≤ 0,15 ≤ 0,15 ASTM D-570
Saponification value carrier film & adhesive mg KOH / g < 5,0 < 5,0 DIN EN 12068
Permeability to water vapour ≤ 2 ⋅ 10-1 ≤ 2 ⋅ 10-1 DIN 53122
g /m 2 ⋅ 24h
Permeability to oxygen ≤ 10-4 ≤ 10-4 DIN 53536
-46±4 -46±4 DIN 53372
Brittleness temperature °C
-58±4 -58±4 GOST 10354
Packing
Standard dimensions
Tape Core-∅
∅ [mm] Width [mm] Roll length [m]
41 30 / 50 / 100 / 150 15
AS39P
78 100 / 150 70
41 30 / 50 / 100 / 150 30
R20HT
78 100 / 150 125
DENSO GmbH Values and properties shown in diagrams and data sheets and recommendations represent our
P.O.Box 150120 • 51344 Leverkusen • Germany tables are not subject to any guarantees. Our knowledge at the time of printing but are in no
tel: +49-(0)214-2602-0 • fax: +49-(0)214-2602-318 warranty is limited to the values and properties as way legally binding on us.
Internet: www.denso.de • E-Mail: info@denso.de required by the relevant standards. Our literature, No 06 issue: 07/08 DENSOLEN AS39P / R20HT