Documente Academic
Documente Profesional
Documente Cultură
Model BSA-M65-17R010-42
The CCI BSA-M65-17R010-42 Multi Band Bi-SectorTM Array is an LTE ready advanced
phased array that supports multiple sectors (two low bands, two high bands) from a single
antenna and provides capability for 700 MHz , SMR 800 MHz, Cellular 850 MHz, PCS 1900
MHz, and AWS 1710/2170 MHz coverage in a compact, 4 ft high single enclosure. Our
unique patented bi-sector technology provides optimized overlap between pairs of asymmet-
ric beams, lowers soft handover losses in UMTS/HSPA+ and CDMA/EVDO systems, and
minimizes interference between sectors. Fast-roll off of each of the outer beams and high
front-to-back ratios ensure reduced interference. Such an approach enhances data transfer
rates within UMTS/LTE and EVDO network sectors and addresses “hotspots” in mobile wire-
less operator networks for SMR, GSM, CDMA, UMTS and LTE technologies.
The remote electrical tilt (RET) Series Multi Band Bi-Sector Array enables operators to
remotely control the electrical down-tilt of the antenna in the field with sealed AISG compliant
RET actuators. The CCI RET system is designed to meet the reliability, flexibility and
efficiency requirements in a wide range of environments. The RET actuators are fully AISG
compliant, software upgradeable, daisy chaining capable and fully weather resistant. The
remote electrical capability allows independent adjustment of sub-beams for easier
optimization.
The single panel design of the Bi-Sector Array offers the opportunity to reduce antenna count
and directly replaces an existing 65° antenna. The new coverage that matches the existing
footprint minimizes the need for optimization and adjacent site changes, and allows for Bi-
Sector Array sites to have significant CAPEX and OPEX cost savings.
Multi Band All CCI antennas are manufactured under ISO 9001.
Bi-Sector Array
Features
Benefits Asymmetrical dual beams optimized to match existing cloverleaf (65°) patterns over a
Multi band applications – 700 wide range of frequency bands – (698-824 MHz); (824-894 MHz); (1710 -1920 MHz);
and (1920-2170 MHz)
MHz, SMR 800 MHz, Cellular
850 MHz, PCS 1900 MHz, AWS 4 ft tall, single panel design supporting four beams without mount changes
1710/2170 MHz Dual +45° and -45° cross-polarization for Left and Right beams
Independent adjustable sub-beams provide unmatched optimization flexibility
Enables efficient evolution of Separate Low-band and High-band ports, Left and Right beams, support 4 sub-
wireless networks sectors
Increase site capacity through 3GPP/AISG 2.0 compliant
higher order sectorization Daisy chaining capability
Software upgradeable
Avoid carrier-adds and building
Rugged, weather resistant and highly reliable internal design
of new capacity sites
Boosts data throughput by lower- Applications
ing interference Upgrade of data-throughput or capacity constrained sites
Patented asymmetrical beam Spectrum limited markets
shape maximizes coverage in a Deferral of CDMA/EVDO or UMTS//HSPA+ carrier adds
standard tri-sector cell plan Spectrum clearing and refarming
Model BSA-M65-17R010-42
Mechanical Specifications
Dimensions (LxWxD) 48.0 x 28.5 x 9.4 inches (1219 x 723 x 240 mm)
Survival Wind Speed > 120 mph (> 193 km/hr )
L+ L- R+ R- L+ L- R+ R-
Front Wind Load 283 lbs (1257 N) @ 100 mph (161 kph) 45 45 45 45 45 45 45 45
Side Wind Load 106 lbs (471 N) @ 100 mph (161 kph) H H H H L L L L
2 2
Equivalent Flat Plate Area 11.0 ft (1.0 m )
Weight (without Mounting) 70 lbs (32 kg)
Bottom View
RET System Weight 6.6 lbs (3 kg)
H - High Band
Connector 8; 7-16 DIN female L - Low Band
Mounting Pole 2-5 inches (5-12 cm)
Antenna Patterns* Rear View
*Typical antenna patterns. For detail information on antenna pattern, please contact us at info@cciproducts.com. All specifications are subject to change without notice.
Model BSA-M65-17R010-42
Ordering Information:
BSA-M65-17R010-42 Antenna (4), Bi-Sector Array, Multiband (700, 800, 850, 1900, M04 Top
1710/2110 MHz), Remote Electrical Tilt Mounting Bracket
BSA-M65-17R010-42-K Complete Kit with Antenna (4’), Factory Installed Actuators (4) and
M04 Mounting Bracket
BSA-RET200 RET Actuator
M04 Bottom
BSA-M04 Mounting Bracket (Top & Bottom) with 0° through 10° Mechanical tilt Mounting Bracket
Adjustment
RET [Remote Electrical Tilt] System
General Specifications Electrical Specifications
Part Number BSA-RET200 Interface Signal Data | dc
Protocols AISG 2.0 Input Voltage Range 10-30 Vdc
Adjustment Cycles >10,000 cycles
Current consumption during tilting 120mA at Vin = 24V
Tilt Accuracy ±0.1°
Current consumption idle 55mA at Vin=24V
Temperature Range -40°C … +70°C
Hardware Interface AISG - RS 485 A/B
Input Connector 1x8-pin Daisy Chain In Male
Standards Compliance
Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC 60068-2-11, IEC 60068-2-14,
IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-2-30, IEC 60068-2-52, IEC 60068-2-64, GR-63
-CORE 4.3.1, EN60529 IP24
Regulatory Certifications
AISG, FCC Part 15 Class B, CE, CSA US