Sunteți pe pagina 1din 24

09_M_ERT_02(config)#display ?

---------------------------------------------

Command of privilege Mode:

---------------------------------------------

acl <Group> acl command group

adsl <Group> adsl command group

alarm Display alarm correlation information

ancp ANCP configuration command

anti-rogueont <Group> Anti-rogueont command group

arp <Group> arp command group

arp-detect Arp Detect

auth Authentication parameters

auto Display AUTO users

auto-backup Auto backup

auto-vccv Display the auto-vccv infomation

autosense Autosensing service virtual port

autounloop Automatic unloop

base-gemport Base GEM port ID

bfd Specify BFD(Bidirectional Forwarding Detection)

configuration information

bgp BGP information

bind <Group> bind command group

bit-error-define PRA Bit Threshold parameters

board <Group> board command group

bonding-group Bonding group

bpdu BPDU
bra Display bra port state

bra-alarm-threshold BRA Alarm Threshold parameters

bra-degrade-threshold BRA Degrade Threshold parameters

bra-error-define BRA Define Threshold parameters

buffer Display buffer occupancy

build-configuration Configuration file build mode

bulk-stat Set the bulk statistic module

car-group Car-Group

car-threshold Car thresholds of 802.1p priorities

cesop CESoP

cesop-connect <Group> cesop-connect command group

cfm <Group> cfm command group

classification <Group>ONT traffic classification profile command group

clip Clip parameters configuration

clock <Group> clock command group

command Command whose level is modified

config System config

cos-group-table CoS-group table

cos-queue-map 802.1p priority and queue map

cos-queue-map-profile Cos queue map profile

cos-remark CoS and corresponding remarked CoS

cpe-management Show parameter information of cpe-management

cpu Display used percent of cpu

cpu-overload-control Display bucket parameters

current-configuration Current configuration

data Display data synchronization status

dba-profile <Group>DBA profile configuration command group


debugging <Group> debugging command group

default-parameter <Group> default-parameter command group

default-policy Display default policy setting

dhcp <Group> dhcp command group

dhcp-client <Group> dhcp-client command group

dhcp-option82 DHCP-option82

dhcp-server <Group> dhcp-server command group

dhcpv6 DHCPv6 command group

dhcpv6-option DHCPv6-option permit-forwarding

dhcpv6-server Add DHCPv6 server IPv6 addresses

digitmap Digitmap configure

digitmap-timer DMM T timer configure

dns <Group> dns command group

dot1ad Dot1ad TPID

dot1x 802.1X

double-tag Double tag

dpbo-esel DPBO-ESEL

dpoe DPOE

dscp-to-pbits DSCP mapping table

dsl XDSL

dsp DSP attributer configure

dsp-para-template Display information of DSP parameters template(s)

dtmf DTMF parameter configure

E1 Display E1 port state

e1-degrade-threshold PRA Degrade Threshold parameters

e1-error-define PRA Define Threshold parameters

e2etrace End to end signalling trace


early-drop <Group>early-drop command group

efm Ethernet Fault Management

emergency-call Emergency call

emu <Group> emu command group

encapsulation Display encapsulation type

epon <Group>EPON command group

esl The online user information

eth <Group> eth command group

exchange-weight Overload control weight exchange

explicit-path Display IP explicit paths

F5 Display F5 oam configuration of port data

fault Display the board fault list

fax FAX parameter configure

fax-modem Fax and modem parameter configuration

fib FIB status and configuration information

file File system information

file-server Display file server configuration

firewall <Group> firewall command group

flush Smart Link FLUSH packet

frame <Group> frame command group

ftp FTP user and password configuration

gemport GEM port

global-digitmap Global digitmap information

gpon <Group> gpon command group

h248profile Display the used profile info

h248stack Display H248 stack transactions reliability parameter

h248statistics H248 message statistic


hwtacacs-server HWTACACS server information

icmp ICMP status and configuration information

icmpv6 ICMPv6 status and configuration information

if-h248 MG interface

igmp <Group> igmp command group

interface <Group> interface command group

io-packetfile IO packet file in flash

ip <Group> ip command group

ip-aware Ip aware feature command

ipoa IPoA config

ipprec-to-pbits IP precedence mapping table

ipv6 <Group> ipv6 command group

isis ISIS status and configuration information

isolate <Group> isolate command group

iua-link IUA link

iua-linkset IUA linkset

l2ua L2ua protocol

l3vpn L3vpn module

lacp Link Aggregation Control Protocol

line Display parameter of ADSL port

link-aggregation Link aggregation group

linktrap Link trap switch of the port

local-digitmap The local digitmap

location Display MAC address location

lspv Lsp verification

mac-address <Group> mac-address command group

mac-count-zero Maximum MAC address learning number is zero


mac-pool Configure/display MAC pool

mbgp Multicast-bgp routing table

meth Meth routing

mg-overload-control MG overload control parameters

mg-ringmode Ring parameter

mg-software MG interface software parameters

mgbrauser MG-BRA user operation

mgc-overload-control MGC overload control parameters of the MG interface

mgprauser MG-PRA user operation

mgpstnuser MG-PSTN user operation

mgr2user MG-R2 user operation

mguser MG user operation

migp Multicast-igp routing table

mirror Display mirror information

mix Mix info

modem MODEM parameter configure

monitor-link Monitor link group

mpls <Group> mpls command group

mrt Multicast-static routing table

msginfo Ten record of msg overloading

multi-portid Multicast GEM port

multi-r2-adapt <Group> multi-r2-adapt command group

multicast <Group> multicast command group

multicast-unknown Multicast-unknown keyword

nac Neighbor automatic communication

network Network

norollback Display undo rollback time information


ntp-service NTP (Network Time Protocol) service

ont <Group> ont command group

ont-alarm-policy Alarm policy profile

ont-digitmap-profile Ont digitmap profile

ont-learned-mac The mac that the ont learned

ont-lineprofile <Group> ont-lineprofile command group

ont-mg-attribute-profile

Ont mg attribute profile

ont-mgc-profile Ont mgc profile

ont-pots-profile Config pots profile

ont-sipagent-profile ONT SIP agent profile

ont-siprightflag-profile

ONT SIP right flag Profile

ont-slaprofile Ont-slaprofile

ont-srvprofile ONT service profile

ont-voip-media Ont voip media

onu Display the state of the function of managing the ONU

through the NAT proxy for the OLT

optical-alarm-profile Optical alarm profile

ospf Open Shortest Path First (OSPF)

ospfv3 <Group> ospfv3 command group

overload-aware Awareness of overload

oversea Oversea parameters

packet Packet

packet-filter Display the configuration information of packet filter

pbits-to-pbits Priority mapping table

pim PIM status and configuration information


pitp <Group> pitp command group

port <Group> port command group

power Query system power

power-dialer-control Power dialer control parameters

pppoa <Group> pppoa command group

pppoe <Group> pppoe command group

priority-mark The priority of the packet send from the interface

progress Display progress

protect-group Protect group

protocol <Group> protocol command group

pstn Display pstn port state

ptp <Group> ptp command group

pw <Group> pw command group

pw-ac-binding PW AC binding

pw-description PW description

pw-para Specifing PW PARA Mode configuration

pw-ps PW protection group info

qos-info QoS interface configuration information

queue-buffer CoS queue buffer size ratio

queue-scheduler CoS queue scheduling mode

queue-shaping Queue shaping

r2 Query R2 profile

rack Display information about Rack

radius-server RADIUS status and configuration information

raio <Group> raio command group

raio-anid ANID

raio-anip ANIP
raio-format RAIO format string

raio-mode Display relay agent info option mode

raio-profile RAIO profile

rawip <Group> rawip command group

resource System resources(mem,message,cpu)

rfc2198 <Group> rfc2198 command group

ring Configure/display ring check information

rip <Group> rip command group

rm Routing Module

rogueont The rogueont

rollback Display board rollback state

route-policy Display configured route-policy

router Configure router information

rrpp Rapid ring protection protocol

rsa Display RSA module status and configuration information

runstat Display running statistic information of system

saved-configuration The saved configuration information

sctp Sctp protocol

section-details Section details

security <Group> security command group

service-num Display service number(s)

service-port Service port

service-port-bundle Service virtual port bundle

shdsl <Group> shdsl command group

simulation Simulation

snmp-agent <Group> snmp-agent command group

snmp-profile <Group>SNMP profile command group


special-portid Special GEM port

spm-profile Smart power management profile

ssh <Group> ssh command group

stacking VLAN stacking

standalone Info for stand alone

standby-port The ports of standby board

static-route Static route

statistics <Group> statistics command group

stp Spanning tree protocol

syslog <Group> syslog command group

sysman <Group> sysman command group

system <Group> system command group

tag-mode Tag mode

tcont T-CONT

tcp TCP status and configuration information

tdm-connect <Group> tdm-connect command group

tdm-vcl TDM VCL

tei-check TEI check parameters

temperature <Group> temperature command group

terminal <Group> terminal command group

thresholdid Display threshold id information

tid-format Terminal ID

tid-template TID template

time Set the time-stamp between NMS and network element

trace TRACE transmission encryption switch

traffic <Group> traffic command group

traffic-limit Limit the rate of the packets


traffic-suppress Display information of traffic suppression

trap <Group> trap command group

trap-sync Display trap synchronization switch

tunnel-info Tunnel Info

tunnel-policy Tunnel policy

tunnel-policy-config Tunnel policy configuration

udp <Group> udp command group

upgrade Software upgrade

upward-bandwidth Set upward bandwidth parameters

user User define ring

vdsl <Group> vdsl command group

vlan <Group> vlan command group

vlan-feature Display configuration of VLAN

vmac Configure/display VMAC information

vmac-umac-mapping Display the mapping of VMAC-UMAC

voice-para Voice para running

voice-para-template Parameter template

vpls Virtual private LAN service

vrgw VRGW

vrrp-snoop <Group> VRRP-SNOOPING command group

vsi Virtual switch instance

vsi-ac-binding VSI AC binding

vtp-cdp VTP-CDP

wred-profile WRED profile

xdsl <Group> xdsl command group

xpon <Group> xpon command group

---------------------------------------------
Command of user Mode:

---------------------------------------------

alarm <Group> alarm command group

autosave Display parameter of automatic saving

bandwidth Display bandwidth of board and port or system convergence

baudrate Display serial baudrate

board Display information of board

client Users information

event <Group> event command group

frame Display information about Frame

history-command Display the session history command

idle-timeout Display interval of terminal timeout

if-h248 MG interface

infoswitch Display information output switch of information terminal

interactive Display command confirmed function

language Display language version information

log <Group> log command group

loghost Display the configuration list of the log server

mem Display used percent of memory

patch Display information of patch

serial-mode Display access-mode: console/cqt/112/spl

sysman Configuration of the management channel

system <Group> system command group

sysuptime Display system run time

temperature Display board temperature

terminal <Group> terminal command group

time <Group> time command group


time-range Time range status and configuration information

timezone Display current time zone

version <Group> version command group

09_M_ERT_02(config)#display

09_M_ERT_02(config)#

13

14

15

16

17

18

19

20

21

22

-------------------------------------------------------------------------

9_M_ERT_02(config)#display board 0/0

---------------------------------------

Board Name : H801CITD

Board Status : Normal

---------------------------------------

------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time

------------------------------------------------------------------------------

POWER-ON - -

------------------------------------------------------------------------------

------------------------------------------------------------

Bits PortID Link Status

------------------------------------------------------------

0 failed

1 failed

------------------------------------------------------------

9_M_ERT_02(config)# board confirm 0/21

Failure: Board does not exist

9_M_ERT_02(config)#board confirm 0/22

Failure: Board does not exist

9_M_ERT_02(config)#board confirm 0

0 frame 0 slot board has been confirmed

0 frame 1 slot board has been confirmed

0 frame 2 slot board has been confirmed

0 frame 3 slot board has been confirmed

0 frame 4 slot board has been confirmed

0 frame 5 slot board has been confirmed

9_M_ERT_02(config)#board add ?
--------------------------------------------

Command of config Mode:

--------------------------------------------

rameid/slotid<S><Length 3-15>

Parameter: FrameID/SlotID

9_M_ERT_02(config)#board add ?

--------------------------------------------

Command of config Mode:

--------------------------------------------

rameid/slotid<S><Length 3-15>

Parameter: FrameID/SlotID

9_M_ERT_02(config)#board add 0/21 ?

--------------------------------------------

Command of config Mode:

--------------------------------------------

DI 32-channel ADSL2+ over ISDN service board

DK 64-channel ADSL2+ over ISDN service board

DL 32-channel ADSL2+ over POTS service board

DP 64-channel ADSL2+ over POTS service board

DQ 64-channel ADSL2+ over ISDN service board

SP 64-channel VoIP POTS service board

801AIUG 4-port STM-1 ATM interface board

801ASRB 32-channel VoIP POTS service board

801BIUA BITS interface unit

801CITA Universal interface board


801CITD Universal interface board

801CSPA SATop TDM service processing board

801EDTB 16-channel E1 interface board

801EPBA 4-port EPON interface board

801ETHA Ethernet subtending board

801ETHB Ethernet upstream and subtending board

801GICF 2-port GE optical interface board

801GICG 2-port GE electrical interface board

801GICK 2-port GE optical/electrical interface board

801GPBC 4-port GPON interface board

801OPFA 16-port FE optical service board

801PRTA DC Power Interface board

801PRTE DC Power Interface board

801PRTG DC Power Interface board

801SPUA High-performance service processing board

801SPUB MPLS service processing board

801TOPA TDM service board

801VRGA Virtual Route Gateway

801X1CA 1-port 10GE optical interface board

801X2CA 2-port 10GE optical interface board

801X2CS 2-port 10GE optical interface board

802DSRD 32-channel VoIP ISDN (2B1Q) service board

802DSRE 32-channel VoIP ISDN (4B3T) service board

802EDTB 16-channel E1, 16-channel SHDSL interface board

802EPBC 4-port EPON interface board

802EPBD 8-port EPON interface board

802GPBD 8-port GPON interface board


802GPFD 16-port GPON interface board

802OPGD 48-port GE optical service board

802P2CA 2-port PON interface board

802SHLB 16-channel SHDSL service board

802XGBC 4-port 10G GPON interface board

803GPFD 16-port GPON interface board

805EPBD 8-port EPON interface board

805GPBD 8-port GPON interface board

806EPBD 8-port EPON interface board

806GPBH 8-port GPON interface board

807EPBD 8-port EPON interface board

808EPSD 8-port EPON interface board

80ASHLM 16-channel SHDSL service board

80BCAME 48-channel combined service board with POTS and ADSL2+

80BCVME 48-channel VDSL2+ and POTS(combo) service board

85BCVME 48-channel VDSL2+ and POTS(combo) service board

HD 16-channel SHDSL service board

CM 48-channel VDSL2 service board, supports vectoring feature

DJ 48-channel VDSL2 service board

DM 48-channel VDSL2 over POTS service board

DN 48-channel VDSL2 over ISDN service board

DP 64-channel VDSL2 over POTS service board

DQ 64-channel VDSL2 over POTS service board

DR 24-channel VDSL2 over POTS service board

DS 24-channel VDSL2 over POTS service board

DT 24-channel VDSL2 over ISDN service board


9_M_ERT_02(config)#board add 0/21 H801PRTE

0 frame 21 slot board added successfully

9_M_ERT_02(config)#board add 0/22 H801PRTE

0 frame 22 slot board added successfully

9_M_ERT_02(config)#display board 2~

% Parameter error, the error locates at '^'

9_M_ERT_02(config)#display board 0

-------------------------------------------------------------------------

SlotID BoardName Status SubType0 SubType1 Online/Offline

-------------------------------------------------------------------------

0 H801CITD Normal

1 H80BVDPE Normal

2 H80ASHLM Normal

3 H80BCAME Normal

4 H805GPBD Normal

5 H809ASPB Normal

9 H802SCUN Active_normal FLBA

10 H802SCUN Standby_normal FLBA

11

12
13

14

15

16

17

18

19

20

21 H801PRTE Normal

22 H801PRTE Normal

-------------------------------------------------------------------------

9_M_ERT_02(config)#board power-off 0/21

Failure: Board does not support the operation

9_M_ERT_02(config)#display alarm active all

<cr>|detail<K>|list<K> }:

Command:

display alarm active all

ALARM 160 FAULT MAJOR 0x1541a023 ENVIRONMENTAL 2016-10-25 13:36:48+01:00

ALARM NAME : An exception occurs in the EMU hardware

SRVEFF : NSA

PARAMETERS : FrameID: 0 EMU ID: 0 Digital ID: 1 EMU Type: FAN

Name: Power fault

DESCRIPTION : An exception occurs in the EMU hardware ,the EMU cannot work
normally

CAUSE : The EMU hardware is faulty

ADVICE : Check whether the input signal of power board is normal or

replace the EMU

--- END

ALARM 159 FAULT MAJOR 0x02310000 EQUIPMENT 2016-10-25 13:36:37+01:00

ALARM NAME : The communication between the board and the control board

fails

SRVEFF : SA

PARAMETERS : FrameID: 0, SlotID: 21, Board Name: H801PRTE

DESCRIPTION : The communication of the board interrupted ,the services in

the board fail

CAUSE : The board is loosened or is removed forcibly

ADVICE : Install the board properly and fasten the screws

--- END

9_M_ERT_02(config)#display alarm active all

<cr>|detail<K>|list<K> }:

Command:

display alarm active all

ALARM 164 FAULT MAJOR 0x1541a023 ENVIRONMENTAL 2016-10-25 13:38:58+01:00

ALARM NAME : An exception occurs in the EMU hardware

SRVEFF : NSA

PARAMETERS : FrameID: 0 EMU ID: 0 Digital ID: 1 EMU Type: FAN


Name: Power fault

DESCRIPTION : An exception occurs in the EMU hardware ,the EMU cannot work

normally

CAUSE : The EMU hardware is faulty

ADVICE : Check whether the input signal of power board is normal or

replace the EMU

--- END

ALARM 163 FAULT MAJOR 0x02310000 EQUIPMENT 2016-10-25 13:38:52+01:00

ALARM NAME : The communication between the board and the control board

fails

SRVEFF : SA

PARAMETERS : FrameID: 0, SlotID: 22, Board Name: H801PRTE

DESCRIPTION : The communication of the board interrupted ,the services in

the board fail

CAUSE : The board is loosened or is removed forcibly

ADVICE : Install the board properly and fasten the screws

--- END

9_M_ERT_02(config)#interface emu

emuid<U><0,127> }:

Command:

interface emu

% Incomplete command, the error locates at '^'


9_M_ERT_02(config)#interface emu ?

--------------------------------------------

Command of config Mode:

--------------------------------------------

muid<U><0,127>

9_M_ERT_02(config)#interface emu 0

9_M_ERT_02(config-if-fan-0)#display fan alarm ?

--------------------------------------------

Command of fan-0 Mode:

--------------------------------------------

cr> Please press ENTER to execute command

9_M_ERT_02(config-if-fan-0)#display fan alarm

EMU ID: 0

----------------------------------------------------------------------------

Alarm name Alarm state

----------------------------------------------------------------------------

Read temperature fault Normal

Fan block Normal

Temperature abnormal Normal

Power fault Alarm

----------------------------------------------------------------------------
9_M_ERT_02(config-if-fan-0)#display fan alarm

EMU ID: 0

----------------------------------------------------------------------------

Alarm name Alarm state

----------------------------------------------------------------------------

Read temperature fault Normal

Fan block Normal

Temperature abnormal Normal

Power fault Alarm

----------------------------------------------------------------------------

9_M_ERT_02(config-if-fan-0)#reset

Are you sure to reset this EMU?(y/n)[n]:y

9_M_ERT_02(config-if-fan-0)#display fan alarm

Failure: EMU is not normal, command failed

9_M_ERT_02(config-if-fan-0)#display fan alarm

Failure: EMU is not normal, command failed

9_M_ERT_02(config-if-fan-0)#display fan alarm

EMU ID: 0

----------------------------------------------------------------------------

Alarm name Alarm state


----------------------------------------------------------------------------

Read temperature fault Normal

Fan block Normal

Temperature abnormal Normal

Power fault Normal

----------------------------------------------------------------------------

9_M_ERT_02(config-if-fan-0)#

S-ar putea să vă placă și