Documente Academic
Documente Profesional
Documente Cultură
3 The asymptotes of hyperbola are inclined at 700 to each other. Construct 5 3 1 1,2
the curve when a point P on it is at a distance of 20mm and 30mm from the &1
two asymptotes. 0
5 Draw a cycloid for one revolution of a circle having 50mm diameter. Draw 5 3 1 1,2
tangent and normal to the curve at a point 35mm above the directing line &1
or base line. 0
1 A point 45mm above xy line is the top view of two points A and B. The front 5 3 2 1,2
view of A is 50mm above the H.P. while that of the point B is 40mm below
&1
0
the H.P. Draw the projections of the points and states their positions with
respect to the principal planes and the quadrant in which they lie.
2 A point A is situated in the first quadrant. Its shortest distance from the 5 3 2 1,2
intersection points of H.P., V.P, and auxiliary vertical planes is 50mm and it &1
is equidistant from the principal planes. Draw the projections of the point 0
and determine its distance from the principal planes.
3 The front view of line inclined at 300 to V.P is 65mm long. Draw the 5 3 2 1,2
projections of a line, when it is parallel to and 40mm above H.P. and one &1
end being 20mm in front of V.P. 0
4 A point A is 20mm above HP and 30mm in front of VP. Another point B is 5 3 2 1,2
35mm below HP and 45mm behind VP. Draw the projections of these &1
points taking the distance between the end projectors as 80mm. Also find 0
the length of the line joining their plans and elevations.
5 The length of the plan of a straight line AB is 50mm and length of the 5 3 2 1,2
elevation is 70mm. The plan ab is inclined at 300 to XY line. Draw the &1
projections of the line AB, assuming point A to be situated on HP and 20mm 0
in front of VP. Also find the true length and inclinations with HP and VP.
6 The front view of a line AB 80 mm long measures 55 mm while its top view 5 3 2 1,2
measures 70 mm. End A is in both HP and VP. Draw the projections of the &1
line and find its inclinations with the reference planes. 0
7 A line PQ, 64 mm long has one of its extremities 20 mm in front VP and the 5 3 2 1,2
other 50 mm above HP. The line is inclined at 400 to HP and 250 to VP. Draw &1
its top and front views 0
8 A line MN is 70 mm long. It's mid -point is 30 mm above HP and 25 5 3 2 1,2
mm in front of VP. The line is inclined at an angle of 450 to HP and &1
350 to VP. Draw its projections. 0
9 The distance between the projectors of two ends of a straight line is 40 5 3 2 1,2
mm. The lower end is 15 mm above HP and 10 mm in front of VP. The &1
upper end is 40 mm above HP and 40 mm in front of VP. Find true length 0
and true inclination.
10 The distance between the end projectors of a line PQ is 50mm. A point P is 5 3 2 1,2
30mm above H.P. and 25mm behind V.P. while a point Q is 40mm below &1
H.P. and 30mm in front of V.P. draw the projections of line and determine 0
the true length and true inclination of the line with H.P. and V.P.
UNIT - III
1 A square ABCD of 50mm side has its corner A in the HP, its diagonal AC 5 3 3 1,2
inclined at 300 to the HP and the diagonal BD inclined at 450 to the VP, and
&1
0
parallel to the HP. Draw its projections.
2 A pentagonal plate of side 30mm is resting on HP on one of its sides with its 5 3 3 1,2
surface inclined at 450 to HP and the resting side is inclined at 550 to VP. &1
Draw its projections. 0
3 A circular plate of 60mm diameter appears as an ellipse in the front view, 5 3 3 1,2
having its major axis 60mm long and minor axis as 40 mm long. Draw its top &1
view when the major axis of the ellipse is horizontal 0
4 Draw the projection of circle of 75mm diameter having the end A of the 5 3 3 1,2
diameter AB is the HP, the end B in the VP and the surface inclined at 300 to &1
the HP and at 600 to the VP 0
5 Regular pentagon lamina of 30 mm side, surface is inclined at 300 to VP and 5 3 3 1,2
side on which it rests on V.P makes an angle of 450 to H.P. Draw its &1
projections. 0