Documente Academic
Documente Profesional
Documente Cultură
User's Manual
Benutzerhandbuch
Mode d’emploi
Manual del usuario
Manuale dell’utente
安裝說明書
用戶手冊
ユーザーズマニュアル
Руководство пользователя
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
English
English
TM
VD500LBNA
User's Manual
English
English
Chapter 1. Product Introduction
ontents Specification
1 2
English
English
Chapter 2. Case Mechanical Operation 2-2 Upper flap installation
2-1 Wheel installation
2 3
2 3
2-3 Lower visor installation
Please align the 4 holes from the wheel to these
four holes on the case and screw in the wheel with
the provided screws.
4 5
2 3
3 4
English
English
2-4 How to open the panel
A.Side panel
C.Top panel
3 1
2 2
Holding the left side, side Caution, the Hydraulic lift will 1
open automatically once the 2
panel, remove the upper
and lower screws. screws are removed.
1 2
3 4
1 Pull the latch as shown.
Lift top panel.
5 6
English
English
2-5 5.25" device installation 2-6 HDD installation
1 2 1 2
3 4 3 4
5 6 5 6
7 8
English
English
2-7 How to install the Power Supply 2-9 7" LCD monitor installation (Optional)
1
2
2 1
1 2
3 4
1 2
9 10
English
English
2-10 7" LCD monitor removal
1 2
6 7
3 4
8 9
6 7
10 11
8 9
11 12
English
English
Chapter.3 Motherboard & Leads Installation
3-1 Motherboard Installation 3-2 Case LED connections
13 14
English
English
3-3 USB2.0 & IEEE1394 Firewire connection 3-4 Audio connection
GND1 GND2
VG (Brank)
TPB+ TPB-
VP (Brank)
GND
15 16
English
English
Chapter 4. Liquid Cooling Installation
3-5 Connexion eSATA 4-1 Installation steps
Components check
Connect this to your
motherboard at the
HDD LED arrow
Install Waterblock P19
means "+"
4-2-1 Intel LGA 775
4-2-2 Intel P4 478
4-2-3 AMD K8
4-2-4 AMD AM2
Complete installation
Connect this to your
motherboard at SATA.
17 18
English
English
4-2 Install waterblock
C
B
A
19 20
English
English
4-2-2 Secure Waterblock onto CPU (Intel P4 Socket 478)
C
B
A
21 22
English
English
4-2-3 Secure Waterblock onto CPU (AMD K8 Socket 754 / 939 / 940)
A. Install by back plate for motherboard B. Install by clips bundled in package
(Standard installation)
C
AMD K8 A B
Motherboard
Remove the
D E F
retention frame G
from motherboard. I
Components for
AMD K8:
G AMD K8 Motherboard
H G-Thermal compound Components for AMD K8:
H-38mm screws A-Metal H-type clip
B-Cushion
Check Your Back Plate! C-Insulator
A. If the back plate does have threaded D-50mm screws
stand offs, please continue with
standard installation.(4-2-3 A) E-Thumb nuts
B. If the back plate does NOT have threaded F-White washers
stand offs, please continue with 4-2-3 B.
G-Thermal compound
Remove the retention I -Stand offs
module from the motherboard.
Install Waterblock on Motherboard
Exploded View Completed View
Remove the back plate on
back side of motherboard.
H
23 24
English
English
4-2-4 Secure Waterblock onto CPU (AMD Socket AM2)
A. Install by back plate for motherboard
(Standard installation)
Combine the Insulator(C) and the cushion (B) Install the Clip on Motherboard
using the adhesive. Stick the metal H-type clip(A)
with the insulators (BC). Tear off the protective
layer to adhere it onto the motherboard. AMD AM2
Motherboard
Remove the
retention frame
Components for from motherboard.
I
H
G F
B
1.Insert the screws (D) through the Clip(ABC)
C into the two holes on the Motherboard.
2.Put the washers (F) along the screws to
A prevent the electric current. G
3.Put the stand offs (I) along the screws to
fix the screws on the motherboard. 1.Apply a thin layer of thermal
D compound(G) onto the processor.
4.Apply a thin layer of thermal compound(G)
onto the processor. 2.Place waterblock on the processor.
5.Place waterblock on the processor through 3.Secure the waterblock on the
the screws and fix it by thumb nuts(E). motherboard by using screws(H).
25 26
English
English
B. Install by clips bundled in package
Install the Clip on Motherboard Combine the Insulator(C) and the cushion (B)
using the adhesive. Stick the metal H-type clip(A)
with the insulators (BC). Tear off the protective
C layer to adhere it onto the motherboard.
A B
E F
G
D I
A
Remove the back plate on
back side of motherboard. I
G
F
Tear off the tape on the back of C 1.Insert the screws (D) through the Clip(ABC)
the Insulator (C) and place it on into the two holes on the Motherboard.
the metal H-type clip(A). A 2.Put the washers (F) along the screws to
prevent the electric current.
3.Put the stand offs (I) along the screws to
D
fix the screws on the motherboard.
Note: 4.Apply a thin layer of thermal compound(G)
Placing the cushion onto the motherboard with the adhesive will prevent you from onto the processor.
removing the cushion in the future. If you are planning to remove the cushion for 5.Place waterblock on the processor through
future use, please don't remove the protective tape. the screws and fix it by thumb nuts(E).
27 28
English
English
4-3 Install watertube
Copper
waterblock
Radiator
Insert a tube through the Unscrew the nut of pump and insert
nut of waterblock. Tighten a new tube through the nut of pump.
the nut on the waterblock. Then tighten it.
29 30
English
English
4-4 Fill Coolant
31 32
English
English
4-5 Schedule Maintenance
Tubing
Tubing within the system must not be bent.
Water Tank Replace tubing if necessary.
Check for water level within the water tank. If the liquid level is below the low level,
please follow the installation steps on manual to refill the coolant.
( we strongly recommend checking the water level once a month)
Tubing Connections
Make sure each connection is tightly secured and
that there are no sign of leakage.
33 34