Documente Academic
Documente Profesional
Documente Cultură
On
“Applied Statistics”
Course Title: Applied Statistics
Course Code: BUS1124
Submitted to
Tahsin Farzana Jisun
Lecturer
Southeast University
Submitted By:
M. Tohidul Islam
ID: 2015210000137
Batch: 41st
Section: 2
Department of BBA
Southeast University
Date of Submission: 20.05.2020
1.What is Non-Probability Sampling?
Non-probability sampling is a sampling technique where the odds of any member being selected
for a sample cannot be calculated. It’s the opposite of probability sampling, where
you can calculate the odds. In addition, probability sampling involves random selection, while
non-probability sampling does not–it relies on the subjective judgment of the researcher.
The odds do not have to be equal for a method to be considered probability sampling.
For example, one person could have a 10% chance of being selected and another person could
have a 50% chance of being selected. It’s non-probability sampling when you can’t calculate the
odds at all.
Quota sampling?
Quota sampling is defined as a non-probability sampling method in which researchers create a
sample involving individuals that represent a population. Researchers choose these individuals
according to specific traits or qualities. They decide and create quotas so that the market research
samples can be useful in collecting data. These samples can be generalized to the entire
population. The final subset will be decided only according to the interviewer’s or researcher’s
knowledge of the population.
For example, a cigarette company wants to find out what age group prefers what brand of
cigarettes in a particular city. He/she applies quotas on the age groups of 21-30, 31-40, 41-50,
and 51+. From this information, the researcher gauges the smoking trend among the population
of the city.
Estimator Estimate
It is a Random Variable. So its value depends It's value is Constant. It is the value taken by
on the outcome of some experiment, and it has an estimator, given a particular set of sample
a statistical distribution. data.
In Statistics, the method used The value that obtained from a sample
Point Estimates
A statistic (value obtained from sample) is used to estimate a parameter (value from the
population).
Take a sample, find x bar. X bar is a close approximation of μ
o Depending on the size of your sample that may not be a good point estimate.
s is a good approximation of σ
If we want stronger confidence in what range our estimate lies, we need to do
a confidence interval.
Interval Estimate
Objectives: Whenever we plan a sample survey, a clear and concise statement of the objectives
should laid down. The objectives must be kept simple enough to be understood by those working
on the survey and to be met successfully when the survey is completed. While setting the
objectives, keep in mind the hypothesis (if any) being tested and the end points that will be used
in the study to examine these hypotheses.
Target Population: the population from which the sample is to be drawn should be defined and
identified in clear and unambiguous terms in terms of its contents, units, and extent and reference
time. This important because a sample must be selected from the population you define at the
outset. The ‘target population’ may be modified to ‘survey population’ to take account t of
practical constraints.
Data: The data to be collected must be relevant and pertinent to the purpose of the survey.
Keeping the objectives in view, a detailed list of variables should be prepared, defined and how
these variables will be measured should be indicated in advance.
Precision Desired: In a sample survey, only a part of the population is measured for which the
survey results are almost always subjects to error. Error of measurement is also an additional
sources of distorting the survey results. These errors can be reduced to some extent by using
larger sample and improved measuring instruments. However, this involves additional cost, time
and effort. Consequently, a decision on the degree of precision desired in the result must be
specified.
Sampling Frame: A sampling frame is an indispensable tool for conducting a sample survey. A
complete accurate and up-dated sampling frame must be constructed in order to draw valid
sample.
Sample Design: When a number of sampling designs are available for a particular sample
survey, one that is most efficient in terms of cost, reliability and appropriateness to meet the
objectives, should be employed (e.g. simple random, stratified or cluster). An approximately
chosen sampling design is highly desirable to obtain reliable estimates of the population
parameters. Many surveys have produced little or no useful information because they were not
properly designed.
Survey Design: The design of a survey involves many interrelated decisions on such factors as
the mode of data collection, constructing questions, data processing method as well as the sample
design. Field data may be collected in a number of ways. A questionnaire may be constructed an
d be mailed to the respondents, who will be instructed to fill-it up and send back the same to
surveyor. This is sometimes called self-administered questionnaire method. The survey may also
employ a face-to-face interview using an interview schedule. This is referred to as the interview
method. Data may also be collected through telephonic conversation or through direct
observation, in which it is called an observational study.
Sample Size: Determination of sample size is perhaps the most difficult part of a statistical
investigation. Often it is the claimed that a sample should bear some proportional relationship to
the size of the population from which it is drawn. This is not true. The absolute size of a sample
is a much more important than its size compared with the population. The size of a sample is a
function of the variation in the population parameters under study and the precision of the
estimate needed by the researcher.
Pre-Testing: Pre-testing is a trial or operation that allows us to test the questionnaire in the field
or other measurement instruments, to screen interviewers and to check on the management of
field operations. The results of the pre-test usually suggest that some modifications must be
made before a full-scale sampling is undertaken. The failure to pre-test concepts and detailed
plans for the survey could result in loss of time, costs exceeding budget limit and even a survey o
poor and inadequate quality. Pre-testing provides the means of uncovering deficiencies and the
basis for corrective action prior to carrying out the actual survey work. It may also suggest
amount of workload to be assigned to each investigator and an insight into the data processing
operation in advance.
Duration of Study: Once the data of execution of the survey is decided, it remains to set up a
work schedule for the completion of the various stages of the study. These included, among
others, the time that would be needed for preparatory works, sample selection, pre-test,
questionnaire development field work including travelling and subsistence, tabulation plan,
training of field staff, data coding, data entry processing and report writing. It is recommended
that this information be presented in the form of a detailed timetable with months across on the
top and activities listed along the left margin. For each of the activities mark a cross against the
month(s) in which they will occur.
Fieldwork: Efficient organization of this fieldwork is a pre-requisite of the successful
completion of a statistical investigation. The personal involved in the fieldwork should receive-
adequate training related to the work. Appropriate measures should be taken so that the field
personnel are regularly supervised and their works be monitored. Quality of the work should be
ensured at very early stage of the work so that any inconsistence or shortcomings can be
removed well before the completion of the work. An instruction manual should be prepared for
all categories of person involved in the field operation. This will ensure quality data assuring
maximum accuracy in the estimates.
Data Management: Large surveys generate huge amounts of data. Hence, a well-prepared data
management plan is of prime importance. This plan should included the steps for processing data
from the very inception of the study until the final analysis is completed. The administrative and
computer procedures to be used, the type of staff available and whether any training will be
needed to facilitate data management should also be described. A quality control scheme should
also be included in the plan in order to check for agreement between processed data and data
gathered in the field.
Editing and Checking: A detailed plan must be outlined at the outset to check and edit the field
data soon after they are hand for any erroneous and inconsistent entries. Both manual and
computer checking may be employed for any inconsistency in data. For any erroneous entry,
which cannot be corrected at this stage, should be corrected by re-interviewing the respondents.
Data Processing and Analysis: once the data are checked, edited and corrected for errors,
processing of data should be attempted keeping in view the objectives of the survey. This task
also needs careful planning. The next step is the statistical analysis, which is carried out to arrive
at the desired estimates of the population parameters. Outline the statistical methods that will be
used for analysis of the data, including a description of how the information collected will be
used to test the stated hypothesis and how any missing data will be dealt with.
Report Writing: Finally, report of the finding of the study highlighting the policy implications
and suggesting possible action and measures to be taken including policy recommendation,
should be written in the report.
Lessons Learned: Survey is a complex undertaking and is liable to large margin of errors if not
properly handled. Because of this complexity, things never go exactly as we plan. The main
obstacle and difficulties, which one expects, might interfere with the successful completion of
the study within the time and cost proposed should therefore be described.
1. Binomial distribution is applicable when the trials are independent and each trial has just
two outcomes success and failure. It is applied in coin tossing experiments, sampling
inspection plan, genetic experiments and so on.
μ = np
4. Depending on the values of the two parameters, binomial distribution may be uni-modal or bi-
modal.
To know the mode of binomial distribution, first we have to find the value of (n+1)p.
σ² = npq
npq < np
That is, variance of a binomial variable is always less than its mean.
7. Variance of binomial variable X attains its maximum value at p = q = 0.5 and this maximum
value is n/4.
8. Additive property of binomial distribution.
and
Then (X+Y) will also be a binomial variable with the parameters (n₁ + n₂) and p
A stratified sample is one that ensures that subgroups (strata) of a given population are each
adequately represented within the whole sample population of a research study.
For example, one might divide a sample of adults into subgroups by age, like 18–29, 30–39, 40–
49, 50–59, and 60 and above. To stratify this sample, the researcher would then randomly select
proportional amounts of people from each age group. This is an effective sampling technique for
studying how a trend or issue might differ across subgroups.