Documente Academic
Documente Profesional
Documente Cultură
1 Installation Requirements
System requirements:
• Intel Pentium 4
• 256 MB of available RAM space
• Ca. 500 MB of available hard disk space
• resolution 1024x768
• Ethernet interface
• Windows XP Professional SP2 or higher
Windows Vista Ultimate / Business
(For Vista system requirements please refer to:
http://support.microsoft.com/kb/919183/en-us)
Installation Notes:
2 Install SILworX
Step 1: Insert the DVD Documentation & Software for HIMax
and HIMatrix Systems. The DVD Menu will start
automatically after a few seconds.
Alternatively: Open the file Index.htm in the ../ENGLISH
directory on the DVD.
3 SILworX Licensing
SILworX is copy protected by hardware licensing. Two different license
types are supported:
The SILworX installation supports all license types. The license can be
activated or changed after installation. SILworX automatically starts in
DEMO mode if no license is available and imposes the following
restrictions:
- Special DEMO format for Project data.
Projects or Archives created in DEMO mode cannot be edited
with a licensed version.
- Code generation is not supported.
- Online features are not supported.
License Activation
Each SILworX installation must be activated, either by a Softlock or
Hardlock License. Ways for the license activation:
Softlock License
With each ordered license you receive a license number on the delivery
note and invoice. This license number is used to request one license
activation for a dedicated PC hardware (see 3.1 Softlock/Upgrade
License Request).
License Upgrade for a new SILworX Version
An upgrade must be ordered to use a new SILworX version. Please
submit the existing license number to obtain an upgrade. Delivery
includes the new installation DVD. With the existing license number a
new activation file has to be requested and activated (see 3.1
Softlock/Upgrade License Request).
Note:
The file name with the 6-digit license number is used for
identification and should not be changed.
Note:
Make sure that your email contains exactly one
attachment. Please do not send a v-card (electronic
business card) with your email.
Note:
HIMA recommends to make a backup of the license
activation file. In case the license is lost on the PC due
to uninstall or hard disk formatting you can renew the
activation with the backup.
Note:
The activation file for V3.x cannot be used with earlier
SILworX versions. To use SILworX V2.x the existing V2
activation files have to be used.
Note:
If the license activation fails, the following message
occurs:
„Warning License check has failed!”
„Warning DEMO License active. “
Please restart SILworX and repeat the license
activation. In case of problems please contact HIMA
Support.
4 Support
In case of problems with the installation or license activation please
contact HIMA Support. The free HIMA hotline is open Monday to Friday,
8.30 am – 4.00 pm (CET/CEST).
E-Mail: hotline@hima.com