Documente Academic
Documente Profesional
Documente Cultură
- Press the key to select the file list, use the click wheel
to navigate
- Select the file which matches the probe and wedge you are using
- While adjusting the parameters, confirm with the 3D view that they match
the weld preparation.
Invalid
Geometry
Top Right
Width is
too wide
- In the ‘Geometry’ menu set the Index offset distance, which positions the
front of the wedge in reference to weld center.
2nd skip
- When ready to go, you can directly press as the encoder position will
be automatically set to the ‘Scan Start Pos.’ value.
- Once the area has been scanned, press and save the recorded file.
It will be saved with a .utdata file extension.
10
11