0 evaluări0% au considerat acest document util (0 voturi)
17 vizualizări1 pagină
Stainless steel tubing recommended for use with Excelock fittings should have diametrical tolerances within 0.005" and a hardness not exceeding 180HV/Rockwell B90. The tubing should be free from scratches and suitable for bending. Tables show the recommended maximum working pressures for annealed 304 or 316 stainless steel tubes based on material properties and a safety factor of 4.1, ranging from 4,000 to 20,000 psi depending on tube wall thickness and diameter. Larger tube sizes should contact the technical department for pressure recommendations.
Stainless steel tubing recommended for use with Excelock fittings should have diametrical tolerances within 0.005" and a hardness not exceeding 180HV/Rockwell B90. The tubing should be free from scratches and suitable for bending. Tables show the recommended maximum working pressures for annealed 304 or 316 stainless steel tubes based on material properties and a safety factor of 4.1, ranging from 4,000 to 20,000 psi depending on tube wall thickness and diameter. Larger tube sizes should contact the technical department for pressure recommendations.
Stainless steel tubing recommended for use with Excelock fittings should have diametrical tolerances within 0.005" and a hardness not exceeding 180HV/Rockwell B90. The tubing should be free from scratches and suitable for bending. Tables show the recommended maximum working pressures for annealed 304 or 316 stainless steel tubes based on material properties and a safety factor of 4.1, ranging from 4,000 to 20,000 psi depending on tube wall thickness and diameter. Larger tube sizes should contact the technical department for pressure recommendations.
Recommended Tubing for use with Excelock Fittings: When selecting stainless steel tubing for use with Excelock tube fittings, either BS 3605 or ASTM A269 tube where diametrical tolerances are within k005" and hardness does not exceed 180HV/Rockwell B90 will be satisfactory. Tubing should be free from scratches and suitable for bending.
Recommended Maximum Working Pressures:
The tables below show the recommended maximum working pressures for stainless steel tubes, annealed 304 or 316 to ASTM A269 are equivalent in pounds per square inch, based on ultimate tensile strength 75,000 p.s.i., within temperature range of -200 to 100oF, with a factor of safety 4.1.