Sunteți pe pagina 1din 2

Capital University of Science and Technology

Department of Mechanical Engineering


EEME2742 – Electrical Engineering
PART-B _OPEN BOOK
In lieu of Final Term Exam (BS ME) – TAKEN ONLINE
Semester: Spring 2020 Max Marks:20
th
Date: 24 June,2020 Time: 60 Min
Instructors: Engr. Moin Qasim
Instructions:
 Each student shall be required to write his/her Name and Registration Number on each
page of the answer sheet and sign those answer sheets before submission
 This Final Exam should be done by hand and then scanned. You can do this by taking clear
photos of the hand written sheet.
 Create a Pdf/doc file of your solution
 Your Pdf/doc file name should be in this format
Reg#_Name_Final_Part-B.pdf
Reg#_Name_Final_Part-B.docx 
 This Final Part B has two parts related to each CLO. Attempt all questions in proposed time for
each part.
 This Final Exam Part B carries 20% weightage towards the final evaluation
 (60 minutes solution + 30 minutes sending = 90 minutes)

Name: Reg. No.

Important Note:
R2 and R1 are two last digits of your Registration Number and V1 = R2 + 30
Example, in BME193045, R2 =4, R1 =5 and V1 = 34.
 Write Final term Exam-Part A Spring2020 on top of your answer sheet
 Then in the second line write Your Name and Registration Number.
 Then in the third line write R2 , R1 and V1 of your Registration Number and
put your signatures

EEME2752–Electronics Engineering Page 1 of 2


Part-III
Question No. 3. (CLO – 3) (10 Marks)

Find the equivalent circuit of this transformer referred to the low-voltage side of the transformer
Part-IV

(Question No. 4. (CLO – 3) (10 Marks)

A core with three legs is shown in Figure 3. Its depth is R1+7 cm. and there are 200 turns on the
leftmost leg. The relative permeability of the core can be assumed to be R1 R2 00 and constant.
What flux exists in each of the three legs of the core? What is the flux density in each of the
legs? Assume a 4 percent increase in the effective area of the air gap due to fringing effects

Figure 3

EEME2752–Electronics Engineering Page 2 of 2

S-ar putea să vă placă și