Documente Academic
Documente Profesional
Documente Cultură
Product Overview
FG901SB Base Sounder operate over a wide input voltage
range of 16 to 40V DC. The conventional range of detector
base sounders are available in a standard 32 tone version in
white with locally controllable output levels to enable the
sound intensity to be adjusted to suit the application. This
arrangement provides an extremely low-profile unit which
is unobtrusive and protrudes only 28mm from the wall. The
distinctive low-profile shape is acoustically very efficient,
producing an omnidirectional high sound output at low
current levels. Rugged construction with solid state electronics
also provides high reliability and stable performance.
System Functionality
Volume is set by dip switches (see Table 1)
Tone is set by dip switches (see Table 2) Standard Connection
Simplified Installation
Pass the loop cables through their bracket’s passage.
Set the bracket in the intended installation location.
Fix the bracket to the ceiling, using the supplied screws
and wall anchors; use the pre-cut holes.
Install the base sounder on the mounting bracket. Take
care to align the bracket’s sound diffuser cone to
device’s sound outlet.
Screw cables into the terminal block.
Dimensions
D
H Wire Function
Red Positive 16-40Vdc
Black Negative
Internal 129 27
Technical Specification
Description : Internal Sounder Base
Features Standards : EN54 Compliant
Operating Voltage : 16-40Vdc (Typical 24Vdc)
Operating Current : 3mA (High Volume)
Ultra low current (see table)
Tones : See table 2
4 volume labels
Sound Ouput @ +/- 3dB : See table 1
Optical coverage level (see table)
Volumes : 4 (see table 1)
32 primary tones
Operating Temperature : -10°C to +55°C
32 alternative tones
Humidity (Non Condensing) : 0 to 95% RH
Up to 92 dba
Construction : ABS
Dimensions (H x W x L) : 129mm x 27mm
Weight : 210g
MODEL DESCRIPTION Ingress Protection : 21C
Cable Entry : Rear
Loop power base sounder
FG901SB white colour Cable Size : 0.5mm to 2.5mm
Switch 6 Switch 7
HIGH 1 1 92.6dB(A) @
1m, 970Hz 1328
continuous tone(1)
MID-HIGH 1 0 DIP Switch Configuration Number DIP Switch Configuration
MID-LOW 0 1 1
2
LOW 0 0 3 Tone selection
4
(1) See document TSD-SBN00-00A for audio output details 5
6
Volume selection
7