0 evaluări0% au considerat acest document util (0 voturi)
56 vizualizări4 pagini
The Alfalux high bay fitting is designed for high mounting heights up to 10 meters. It provides high light output in a compact and simple to install design. The fitting has an IP65 rating and uses an aluminum base with a heavy duty diffuser. It can be used for both non-maintained and maintained emergency lighting applications.
The Alfalux high bay fitting is designed for high mounting heights up to 10 meters. It provides high light output in a compact and simple to install design. The fitting has an IP65 rating and uses an aluminum base with a heavy duty diffuser. It can be used for both non-maintained and maintained emergency lighting applications.
The Alfalux high bay fitting is designed for high mounting heights up to 10 meters. It provides high light output in a compact and simple to install design. The fitting has an IP65 rating and uses an aluminum base with a heavy duty diffuser. It can be used for both non-maintained and maintained emergency lighting applications.
• BSI verified spacing data • IP65 rated • Aluminium base and heavy duty diffuser • Simple to install ay ig hB x H a lu lf A
Conventional dedicated Twin spot projectors are Converted mains fittings
bulkheads lack sufficient unlikely to provide the are often too large and Conventional light dedicated output and often Twin spot 0.5Lux projectors minimum are coverage Converted may mains fittings be unsuitable are for non bulkheads have lack sufficient inappropriate unlikely over thetoentire provide thefloor core often too large maintained and may be emergency light output and photometric often have distribution 0.5Lux area forminimum coverage open areas, as unsuitable operation.for non inappropriate for photometric high mounting heights. over the entire required core floor for compliance maintained emergency distribution for high area for with open /areas EN1838 BS5266as part 7. operation. mounting heights. required for compliance with EN1838/BS5266 part 7 The New JSB Alfalux high bay fitting provides a compact, simple to install, high performance solution, suitable for mounting heights of up to 10 Metres.
Specially designed 4 cell control gear provides a high
emergency ballast lumen factor, and a high efficiency reflector controls the distribution of light to ensure optimum spacing.
The fitting is available in Non maintained, maintained
and slave versions. Maintained versions are ideal for providing low level background lighting for night lighting or security applications.
Installation is simple with features such as a hinged
geartray, secured by a thumbscrew and push in wire terminals for the mains supply, capable of accepting solid or stranded cables.
Maintenance issues have not been overlooked either,
an extra high output green LED is provided for mains /charge healthy indication, which can easily be seen from ground level even with high ambient lighting levels and high mounting heights.
Materials Installation notes
Base - Die cast aluminium, finished in white powder • Suitable for ceiling mounting coated paint • Designed for mounting heights of 6-10M (see spacing Diffuser - Clear polycarbonate data overleaf) Batteries (self contained versions) - Nickel cadmium • Twin BESA entry drill-outs on rear • 20mm conduit entry on each end, with blanking plugs • Direct screw fix option, with fixing holes outside IP65 area • Geartray hinged, retained in closed position by single thumb screw • Terminal block, accommodating push in wiring (solid or stranded cables) • Diffuser retained by allen key security screws • Supplied complete with 1x8W lamp Dimensions Spacing Data
W 1 Lux spacing for escape routes
L Non Maintained Maintained D A-W A-A T-T T-W A-W A-A T-T T-W
4M 2.8 8.0 9.4 3.4 1.6 7.2 8.5 2.9
6M 2.8 8.0 9.8 3.2 2.2 7.5 9.2 2.2 8M 1.4 7.9 8.5 1.4 1.0 7.5 7.7 1.0 10M - - - - - - - - 0.5 Lux spacing for open areas L (mm) W (mm) D (mm) 400 136 95 Non Maintained Maintained A-W A-A T-T T-W A-W A-A T-T T-W
HL8N Alfalux High bay 8W Non Maintained 3Hr Standby HL8MIS Alfalux High bay 8W Maintained 3Hr Standby c/w intelligent self test HL8NIS Alfalux High bay 8W Non Maintained 3Hr Standby c/w intelligent self test HL8230 Alfalux High bay 8W slave 230V AC HL8230CG Alfalux High bay 8W slave CEAG compatible
Head Office Cooper Lighting and Security Ltd, Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB