Documente Academic
Documente Profesional
Documente Cultură
Catalog 2090
Micro-Machining
Productivity Solutions
Catalog 2090 is Kennametal’s response to customer demand for a single-source
for proven micro-machining solutions. This new catalog displays Kennametal’s
comprehensive line of micro-machining tooling solutions in one convenient resource.
Now, whether you’re turning, drilling, or milling, you’ll find world-class productivity
solutions for ALL your micro-machining and small turning center
applications at your finger tips.
KEY FEATURES:
• KM® Micro ... the focus of Catalog 2090. This unique,
revolutionary quick-change tooling system is specially
designed to mount on Swiss-Style turning centers,
gang machines, and smaller lathes.
• Our micro boring bar offering delivers bores as small
as .062”. Kennametal micro threading bars provide
threads as fine as 48 tpi while our micro grooving bars
accept standard .015” width inserts.
• High-speed solid carbide Dynapoint® TF drills, with a triple flute, 130-degree point
design, are available in grade K10 and TiAlN-coated grade KC7210. These drills, ranging
from #33 to 1/2” diameter, are an excellent choice for machining aluminum, non-ferrous
materials, ductile or gray cast irons, and for titanium short-hole applications.
• Solid carbide Dynapoint® SE drills, from 1/8” to 1/2” diameter, are
featured in grade CS5 and TiAlN-coated grade KC7215. The
patented SE point design defines reliability in high-speed,
heavy-feed drilling applications, and is ideal for
cutting plain carbon, alloy, and tool steel materials.
• A complete line of high-performance solid carbide end
mills, ranging in size from 1/64” to 3/8”, is also available.
• The KENNA PERFECT™ Tooling Selection System
will quickly direct you to the newest and best
Kennametal grades and geometries for your specific
micro-machining application.
• The KENNA UNIVERSAL™ Turning Selection System
offers two new versatile grades, KC8050 and
KC5010, that are perfect for those short-run jobs
machining a wide variety of workpiece materials,
from interrupted roughing to finishing cuts.
Machined medical parts appearing in the Micro Machining Tooling catalog cover photo
were provided courtesy of Sulzer Medica/Sulzer Dental Inc., and by Rose Training Systems.
2 www.kennametal.com
Table of Contents
page
Inserts . . . . . . . . . . . . . . . . . . . . . . . . 4
TM
KM Micro Quick-Change Tooling . . . . . . 139
OD Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
ID Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
by Geometry… by Grade…
…and by looking at
the actual Insert!
GEOMETRY:
Roughing ∆∆
Medium Machining
Finishing
Fine Finishing
5
Turning, Boring,
and Profiling Inserts
page
Turning Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6
KM Micro Cutting Units
Threading, Grooving,
Kenloc Pin/Clamp Combination
SCLC-F
and Cutoff Inserts
Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . 65
LT — Laydown Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
7
KENNA PERFECT Selection System ®
KENNA PERFECT, Kennametal’s 3-step cutting tool selection system, makes choosing and
applying the most productive tool as easy as 1, 2, 3.
Tool recommendations are based on six workpiece material groups, optimizing selection accuracy.
Example:
6 workpiece material groups
Example: steel
Page: 24
2nd Step
Given: cutting conditions:
Select the grade
lightly interrupted cut
Geometry: -MN
Unknown: grade
Solution: KC9125
3rd Step
Select the cutting speed Given: grade KC9125
cutting conditions
Unknown: cutting speed
Solution: 750 sfm
8
KENNA PERFECT Selection System
-MN
Medium Machining
-MN
-FN
Finishing
-FF
Fine Finishing
KT315
KC9110
steel
KC9125
KC9040
9
Wiper Inserts
Steel
Stainless Steel
Cast Iron
Hardened Materials
10
Three Ways to
Improve Your
Turning Operations!
Kennametal introduces three new geometries that are the
latest in state-of-the-art turning technology. Our new -RW
(Roughing Wiper), -MW (Medium Wiper), and -FW (Finishing
Wiper) inserts employ a modified corner radius design which
delivers a superior surface finish compared to conventional
inserts. This technology enables you to choose the metalcutting
benefit that’s most important to your application.
Double Productivity
Kennametal’s new wiper geometries enable you to double your current
feed rate and still achieve surface finishes comparable to conventional
inserts. You’ll also see equivalent or better tool life using the appropriate
KENNA PERFECT grade specifically designed for your workpiece material.
Kennametal Wiper
Technology –MW
Conventional doc ..........0.050
Turning Insert feed ........0.020 ipr
doc ......0.050 speed ......1,100 sfm
feed ......0.012 ipr finish ......60 Ra (µin.)
speed ..1,100 sfm
finish ....160 Ra (µin.) 11
KENNA PERFECT Negative Wipers — Steel ®
-MW
Medium Wiper
-FW
Finishing Wiper
NOTE: For expert application guidance, see page 633 in Catalog 1010.
12
KENNA PERFECT Positive Wipers — Steel
Carbon, Alloy, and Tool Steels up to 48 HRC
-MW
Medium Wiper
-FW
Finishing Wiper
NOTE: For expert application guidance, see page 633 in Catalog 1010.
13
KENNA PERFECT Negative Wipers — Stainless Steel ®
-MW
Medium Wiper
-FW
Finishing Wiper
NOTE: For expert application guidance, see page 633 in Catalog 1010.
14
KENNA PERFECT Positive Wipers — Stainless Steel
Austenitic Stainless Steels
-MW
Medium Wiper
-FW
Finishing Wiper
NOTE: For expert application guidance, see page 633 in Catalog 1010.
15
Negative Wiper Inserts — Application Technology ®
Surface Finish
Theoretical Surface Finish – Ra
µin. (µm)
.008 .012 .016 .020 .024 .028 .032 .036 .040 .044 .048
FW & MW
(0,2) (0,3) (0,4) (0,5) (0,6) (0,7) (0,8) (0,9) (1) (1,1) (1,2)
14 30 50 80
3/8 IC — — — — — — —
(0,3) (0,75) (1,3) (2)
How it Works
Wiper Insert Standard Insert LEGEND
f – feed
r – corner radius
rw – wiper radius
Ra – surface finish
16
Negative Wiper Inserts — Application Technology
C and W Style Inserts Kenloc Toolholders
surface with wiper effect
surface with standard insert edge
NOTE: The holder guidelines above also apply to ceramic/PCBN wiper inserts in similar insert shapes; i.e.: CNGA, CNGX, DNGA, etc.
17
Positive Wiper Inserts — Application Technology ®
-FW -MW
Finishing Wiper Medium
Machining Wiper
Surface Finish
Theoretical Surface Finish – Ra
µin. (µm)
.002 .004 .006 .008 .010 .012 .014 .016 .018 .020
FW , MW
(0,05) (0,10) (0,15) (0,20) (0,25) (0,30) (0,35) (0,40) (0,45) (0,50)
1 6 14 22 35 49
1/4 IC — — — —
(0,03) (0,15) (0,35) (0,55) (0,90) (1,25)
1 4 8 14 22 30 39
3/8 IC — — —
(0,02) (0,10) (0,20) (0,35) (0,55) (0,75) (1,00)
1 2 6 10 16 24 31 39 51 63
1/2 IC
(0,02) (0,06) (0,15) (0,25) (0,40) (0,60) (0,80) (1,00) (1,30) (1,60)
Corner Radius
C.MT wiper inserts create a true corner
radius on the workpiece,
just as standard inserts do.
18
PRESENTING
KENNA UNIVERSAL
…the NEW universal turning
system… from the world’s premier
metalcutting tooling solutions supplier!
Novel, patent-pending technology provides:
• unmatched performance on a variety of workpiece materials
• superior results in finishing through interrupted roughing cuts
-RN
Roughing
-MP -MN
Medium Medium
Machining Machining
-FP
Finishing
19
KENNA UNIVERSAL Negative Inserts ®
Geometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys
Finishing
-FP
KC5010 220 65
high-temp
alloys
KC8050 230 70
NOTE: For expert application guidance, see page 633 in Catalog 1010.
20
KENNA UNIVERSAL Positive Inserts
Geometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys
Finishing
-LF
Fine Finishing
-UF
KC5010 220 65
high-temp
alloys
KC8050 230 70
NOTE: For expert application guidance, see page 633 in Catalog 1010.
21
KENNA PERFECT
Inserts
Steel
Stainless Steel
Cast Iron
Non-Ferrous
High-Temperature Alloys
Hardened Materials
22
• Kennametal’s easy
to use 3-step selection
system makes choosing
the most productive
cutting tool as easy as
one…two…three!
• Based on your
metalcutting conditions,
KENNA PERFECT will
recommend the best
cutting tool material
(grade), insert geometry,
and starting speed
ensuring productivity
from the first chip to
the last.
23
KENNA PERFECT Negative Inserts — Steel ®
-MN
Medium Machining
-FN
Finishing
-FF
Fine Finishing
KC9040 300 90
NOTE: For expert application guidance, see page 633 in Catalog 1010.
24
KENNA PERFECT Positive Inserts — Steel
Carbon Alloy and Tool Steels up to 48 HRC
-MF
Medium Machining
-LF
Finishing
-11
Fine Finishing
-UF
Fine Finishing
NOTE: For expert application guidance, see page 633 in Catalog 1010.
25
KENNA PERFECT Negative Inserts — Stainless Steel ®
-MP
Medium Machining
-FP
Finishing
-FF
Fine Finishing
KC9245 300 90
NOTE: For expert application guidance, see page 633 in Catalog 1010.
26
KENNA PERFECT Positive Inserts — Stainless Steel
Austenitic Stainless Steels
-MF
Finishing
-LF . . GT-LF
Fine Finishing
-11 -UF
varying depth of cut, casting or forging skin KT315 KC5010 KC5010 KC9225
NOTE: For expert application guidance, see page 633 in Catalog 1010.
27
KENNA PERFECT Negative Inserts — Non-Ferrous ®
..MS
Roughing
..GP
Medium Machining
..MS-F (PCD)
Finishing
high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys
Speed - sfm (m/min)
Starting Conditions
Material Grade 800 1600 2400 3200
(250) (500) (750) (1000) sfm m/min
NOTE: For expert application guidance, see page 633 in Catalog 1010.
28
KENNA PERFECT Positive Inserts — Non-Ferrous
..GT-HP
Medium Machining
..GT-LF
Finishing
..GW-F (PCD)
Fine Finishing
high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys
Speed - sfm (m/min)
Starting Conditions
Material Grade 800 1600 2400 3200
(250) (500) (750) (1000) sfm m/min
NOTE: For expert application guidance, see page 633 in Catalog 1010.
29
KENNA PERFECT Negative Inserts — High-Temp Alloys ®
..GP
Medium Machining
GG-LF
Finishing
30
KENNA PERFECT Positive Inserts — High-Temp Alloys
-MF
Medium Machining
..GT-LF
Finishing
..GT-HP
Fine Finishing
K313 150 45
KC5010 200 60
Ni, Fe, and
Co based KC5025 150 45
alloys
KC9225 180 55
KC9240 150 45
K313 110 35
titanium and
titanium KC5010 175 55
alloys
KC5025 130 40
NOTE: For expert application guidance, see page 633 in Catalog 1010.
31
Turning and Boring Insert Identification System ®
1.
Insert Shape
METRIC INSERTS 12 04 08
N—0°
A—3°
C N M G INCH INSERTS
B—5°
C—7°
P—11°
D—15°
2.
4 3 2
E—20°
F—25° Relief Angle
G—30°
4. 5.
Insert Type Insert Size
alternate symbols metric cutting
IC
inch edge length
shape of insert’s ordinary IC less
symbol hole shape of hole chipbreaker in mm C D R S T V W
section system than 1/4"*
1.2 (5) 5/32 3,97 S4 04 03 03 06 — —
N without N 1.5 (6) 3/16 4,76 04 05 04 04 08 08 S3
R without single sided R E 1.8 (7) 7/32 5,56 05 06 05 05 09 09 03
F double sided F — .236 6,00 — — 06 — — — —
2 1/4 6,35 06 07 06 06 11 11 04
A without A
2.5 5/16 7,94 08 09 07 07 13 13 05
M, P, S cylindrical hole single sided M
— .315 8,00 — — 08 — — — —
G, P, Z double sided G 3 3/8 9,52 09 11 09 09 16 16 06
W partly cylindrical without A — .394 10,00 — — 10 — — — —
hole, 40-60°
T countersink single sided M 3.5 7/16 11,11 11 13 11 11 19 19 07
partly cylindrical — .472 12,00 — — 12 — — — —
Q with without A D
hole, 40-60° 4 1/2 12,70 12 15 12 12 22 22 08
U double countersink double sided G 4.5 9/16 14,29 14 17 14 14 24 24 09
B partly cylindrical without A 5 5/8 15,88 16 19 15 15 27 27 10
hole, 70-90°
H countersink single sided M — .630 16,00 — — 16 — — — —
C partly cylindrical without A 5.5 11/16 17,46 17 21 17 17 30 30 11
hole, 70-90° 6 3/4 19,05 19 23 19 19 33 33 13
J double countersink double sided G
— .787 20,00 — — 20 — — — —
X special X X
7 7/8 22,22 22 27 22 22 38 38 15
*Inch system only. — .984 25,00 — — 25 — — — —
NOTE: 8 1 25,40 25 31 25 25 44 44 17
Inch sizes in parenthesis for
“alternate symbols” D or E 10 1 1/4 31,75 32 38 31 31 54 54 21
(under 1/4 inch IC). — 1.260 32,00 — — 32 — — — —
32
Turning and Boring Insert Identification System
▫▫▫▫▫▫▫▫▫
25 25°
30 30°
16.
Tip Style
(optional)
symbol usage
3.5 05 7/32 5,56 1 04 1/64 0,4 MN medium K light feed chip control
machining negative UF ultra-fine finishing
2 08 1/32 0,8 RN roughing negative LF light finishing
4 06 1/4 6,35
3 12 3/64 1,2 UN universal negative MF medium finishing
5 07 5/16 7,94 4 16 1/16 1,6 FP finishing positive D duo tip hone only
6 09 3/8 9,52 5 20 5/64 2,0 MP medium positive E hone only
RP roughing positive T negative land
7 11 7/16 11,11 6 24 3/32 2,4 RM roughing medium S negative land plus hone
8 12 1/2 12,70 7 28 7/64 2,8 RH roughing heavy M mini tip (brazed PCBN)
8 32 1/8 3,2 FW finishing wiper EFW honed, finishing wiper
NOTE: Inch sizes in parenthesis for MW medium wiper
“alternate symbols” D or E — 00 round insert (inch)
(under 1/4 inch IC). — M0 round insert (metric) 33
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CNGA-(S) CNGA-432* CNGA 12 04 08* 1/2 3/16 1/32 .1216 .203
CNGA-433* CNGA 12 04 12* 1/2 3/16 3/64 .1129 .203
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CNMG-FN CNMG-321FN CNMG 09 03 04FN 3/8 1/8 1/64 .0955 .150
CNMG-322FN CNMG 09 03 08FN 3/8 1/8 1/32 .0868 .150
CNMG-430.5FN CNMG 12 04 02FN 1/2 3/16 .008 .1345 .203
CNMG-431FN CNMG 12 04 04FN 1/2 3/16 1/64 .1302 .203
CNMG-432FN CNMG 12 04 08FN 1/2 3/16 1/32 .1216 .203
CNMG-433FN CNMG 12 04 12FN 1/2 3/16 3/64 .1129 .203
CNMG-434FN CNMG 12 04 16FN 1/2 3/16 1/16 .1042 .203
35
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CNMG-MW CNMG-432MW CNMG 12 04 08MW 1/2 3/16 1/32 .1176 .203
CNMG-433MW CNMG 12 04 12MW 1/2 3/16 3/64 .1093 .203
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
DNMG-FF DNMG-331FF DNMG 11 04 04FF 3/8 3/16 1/64 .2004 .150
DNMG-332FF DNMG 11 04 08FF 3/8 3/16 1/32 .1821 .150
DNMG-431FF DNMG 15 04 04FF 1/2 3/16 1/64 .2732 .203
DNMG-432FF DNMG 15 04 08FF 1/2 3/16 1/32 .2550 .203
DNMG-441FF DNMG 15 06 04FF 1/2 1/4 1/64 .2732 .203
DNMG-442FF DNMG 15 06 08FF 1/2 1/4 1/32 .2550 .203
†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.
37
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
DNMG-MP DNMG-331MP DNMG 11 04 04MP 3/8 3/16 1/64 .2004 .150
DNMG-332MP DNMG 11 04 08MP 3/8 3/16 1/32 .1821 .150
DNMG-333MP DNMG 11 04 12MP 3/8 3/16 3/64 .1639 .150
DNMG-431MP DNMG 15 04 04MP 1/2 3/16 1/64 .2732 .203
DNMG-432MP DNMG 15 04 08MP 1/2 3/16 1/32 .2550 .203
DNMG-433MP DNMG 15 04 12MP 1/2 3/16 3/64 .2368 .203
DNMG-441MP DNMG 15 06 04MP 1/2 1/4 1/64 .2732 .203
DNMG-442MP DNMG 15 06 08MP 1/2 1/4 1/32 .2550 .203
DNMG-443MP DNMG 15 06 12MP 1/2 1/4 3/64 .2368 .203
†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.
*Grade KD100 is a single-tipped PCD insert.
38
Kenloc Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
SNMG-FF SNMG-321FF SNMG 09 03 04FF 3/8 1/8 1/64 .0712 .150
SNMG-322FF SNMG 09 03 08FF 3/8 1/8 1/32 .0647 .150
SNMG-431FF SNMG 12 04 04FF 1/2 3/16 1/64 .0971 .203
SNMG-432FF SNMG 12 04 08FF 1/2 3/16 1/32 .0906 .203
39
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
SNMG-MP SNMG-432MP SNMG 12 04 08MP 1/2 3/16 1/32 .0906 .203
SNMG-433MP SNMG 12 04 12MP 1/2 3/16 3/64 .0841 .203
SNMG-434MP SNMG 12 04 16MP 1/2 3/16 1/16 .0777 .203
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
TNMG-FF TNMG-221FF TNMG 11 03 04FF 1/4 1/8 1/64 .3594 .091
TNMG-222FF TNMG 11 03 08FF 1/4 1/8 1/32 .3438 .091
TNMG-331FF TNMG 16 04 04FF 3/8 3/16 1/64 .5469 .150
TNMG-332FF TNMG 16 04 08FF 3/8 3/16 1/32 .5313 .150
†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.
41
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
TNMG-MN TNMG-331MN TNMG 16 04 04MN 3/8 3/16 1/64 .5469 .150
TNMG-332MN TNMG 16 04 08MN 3/8 3/16 1/32 .5313 .150
TNMG-333MN TNMG 16 04 12MN 3/8 3/16 3/64 .5156 .150
TNMG-431MN TNMG 22 04 04MN 1/2 3/16 1/64 .7344 .203
TNMG-432MN TNMG 22 04 08MN 1/2 3/16 1/32 .7188 .203
TNMG-433MN TNMG 22 04 12MN 1/2 3/16 3/64 .7031 .203
TNMG-434MN TNMG 22 04 16MN 1/2 3/16 1/16 .6875 .203
†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.
*Grade KD100 is a single-tipped PCD insert.
42
Kenloc Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1 l
WNGG-LF WNGG-430LF WNGG 08 04 01LF 1/2 3/16 .004 .1367 .203 .342
WNGG-430.5LF WNGG 08 04 02LF 1/2 3/16 .008 .1345 .203 .342
WNGG-431LF WNGG 08 04 04LF 1/2 3/16 1/64 .1302 .203 .342
WNGG-432LF WNGG 08 04 08LF 1/2 3/16 1/32 .1216 .203 .342
WNMG-FF WNMG-331FF WNMG 06 04 04FF 3/8 3/16 1/64 .0955 .150 .257
WNMG-332FF WNMG 06 04 08FF 3/8 3/16 1/32 .0868 .150 .257
WNMG-431FF WNMG 08 04 04FF 1/2 3/16 1/64 .1302 .203 .342
WNMG-432FF WNMG 08 04 08FF 1/2 3/16 1/32 .1216 .203 .342
WNMG-FN WNMG-331FN WNMG 06 04 04FN 3/8 3/16 1/64 .0955 .150 .257
WNMG-332FN WNMG 06 04 08FN 3/8 3/16 1/32 .0868 .150 .257
WNMG-431FN WNMG 08 04 04FN 1/2 3/16 1/64 .1302 .203 .342
WNMG-432FN WNMG 08 04 08FN 1/2 3/16 1/32 .1216 .203 .342
WNMG-433FN WNMG 08 04 12FN 1/2 3/16 3/64 .1129 .203 .342
WNMG-434FN WNMG 08 04 16FN 1/2 3/16 1/16 .1042 .203 .342
WNMG-FP WNMG-331FP WNMG 06 04 04FP 3/8 3/16 1/64 .0955 .150 .257
WNMG-332FP WNMG 06 04 08FP 3/8 3/16 1/32 .0868 .150 .257
WNMG-431FP WNMG 08 04 04FP 1/2 3/16 1/64 .1302 .203 .342
WNMG-432FP WNMG 08 04 08FP 1/2 3/16 1/32 .1216 .203 .342
WNMG-433FP WNMG 08 04 12FP 1/2 3/16 3/64 .1129 .203 .342
WNMG-FW WNMG-331FW WNMG 06 04 04FW 3/8 3/16 1/64 .0923 .150 .257
WNMG-332FW WNMG 06 04 08FW 3/8 3/16 1/32 .0840 .150 .257
WNMG-333FW WNMG 06 04 12FW 3/8 3/16 3/64 .0757 .150 .257
WNMG-431FW WNMG 08 04 04FW 1/2 3/16 1/64 .1259 .203 .342
WNMG-432FW WNMG 08 04 08FW 1/2 3/16 1/32 .1176 .203 .342
WNMG-433FW WNMG 08 04 12FW 1/2 3/16 3/64 .1093 .203 .342
43
Kenloc Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9040
KC9215
KC9225
KC9240
KC9245
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1 l
WNMG-MN WNMG-331MN WNMG 06 04 04MN 3/8 3/16 1/64 .0955 .150 .257
WNMG-332MN WNMG 06 04 08MN 3/8 3/16 1/32 .0868 .150 .257
WNMG-333MN WNMG 06 04 12MN 3/8 3/16 3/64 .0781 .150 .257
WNMG-432MN WNMG 08 04 08MN 1/2 3/16 1/32 .1216 .203 .342
WNMG-433MN WNMG 08 04 12MN 1/2 3/16 3/64 .1129 .203 .342
WNMG-434MN WNMG 08 04 16MN 1/2 3/16 1/16 .1042 .203 .342
WNMG-MP WNMG-331MP WNMG 06 04 04MP 3/8 3/16 1/64 .0955 .150 .257
WNMG-332MP WNMG 06 04 08MP 3/8 3/16 1/32 .0868 .150 .257
WNMG-333MP WNMG 06 04 12MP 3/8 3/16 3/64 .0781 .150 .257
WNMG-432MP WNMG 08 04 08MP 1/2 3/16 1/32 .1216 .203 .342
WNMG-433MP WNMG 08 04 12MP 1/2 3/16 3/64 .1129 .203 .342
WNMG-MW WNMG-332MW WNMG 06 04 08MW 3/8 3/16 1/32 .0840 .150 .257
WNMG-333MW WNMG 06 04 12MW 3/8 3/16 3/64 .0757 .150 .257
WNMG-432MW WNMG 08 04 08MW 1/2 3/16 1/32 .1176 .203 .342
WNMG-433MW WNMG 08 04 12MW 1/2 3/16 3/64 .1093 .203 .342
44
Screw-On Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO
KC9315
dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CCGT-HP CCGT-21.50.5HP CCGT 06 02 02HP 1/4 3/32 .008 .0650 .110
CCGT-21.51HP CCGT 06 02 04HP 1/4 3/32 1/64 .0608 .110
CCGT-21.52HP CCGT 06 02 08HP 1/4 3/32 1/32 .0521 .110
CCGT-32.50.5HP CCGT 09 T3 02HP 3/8 5/32 .008 .0998 .173
CCGT-32.51HP CCGT 09 T3 04HP 3/8 5/32 1/64 .0955 .173
CCGT-32.52HP CCGT 09 T3 08HP 3/8 5/32 1/32 .0868 .173
CCGT-430HP CCGT 12 04 01HP 1/2 3/16 .004 .1367 .217
CCGT-430.5HP CCGT 12 04 02HP 1/2 3/16 .008 .1345 .217
CCGT-431HP CCGT 12 04 04HP 1/2 3/16 1/64 .1302 .217
CCGT-432HP CCGT 12 04 08HP 1/2 3/16 1/32 .1216 .217
45
Screw-On Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO
KC9315
dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CCMT-MF CCMT-21.51MF CCMT 06 02 04MF 1/4 3/32 1/64 .0608 .110
CCMT-32.51MF CCMT 09 T3 04MF 3/8 5/32 1/64 .0955 .173
CCMT-32.52MF CCMT 09 T3 08MF 3/8 5/32 1/32 .0868 .173
CCMT-32.53MF CCMT 09 T3 12MF 3/8 5/32 3/64 .0781 .173
CCMT-432MF CCMT 12 04 08MF 1/2 3/16 1/32 .1216 .217
46
Screw-On Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CPGB(-F) CPGB-32.50.5F* CPGB 09 T3 02F* 3/8 5/32 .008 .0998 .173
CPGB-32.51F* CPGB 09 T3 04F* 3/8 5/32 1/64 .0955 .173
CPGB-32.52F* CPGB 09 T3 08F* 3/8 5/32 1/32 .0868 .173
*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.
NOTE: Grade KD100 is a single-tipped PCD insert.
47
Screw-On Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO
KC9315
dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CPGW(-F) CPGW-21.50.5F* CPGW 06 02 02F* 1/4 3/32 .008 .0650 .110
CPGW-21.51F* CPGW 06 02 04F* 1/4 3/32 1/64 .0608 .110
CPGW-21.52F* CPGW 06 02 08F* 1/4 3/32 1/32 .0521 .110
CPGW-32.51F* CPGW 09 T3 04F* 3/8 5/32 1/64 .0955 .173
CPGW-32.52F* CPGW 09 T3 08F* 3/8 5/32 1/32 .0868 .173
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
CPMT-UF CPMT-21.51UF CPMT 06 02 04UF 1/4 3/32 1/64 .0608 .110
CPMT-32.51UF CPMT 09 T3 04UF 3/8 5/32 1/64 .0955 .173
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
DCMT-LF DCMT-21.50.5LF DCMT 07 02 02LF 1/4 3/32 .008 .1364 .110
DCMT-21.51LF DCMT 07 02 04LF 1/4 3/32 1/64 .1275 .110
DCMT-32.50.5LF DCMT 11 T3 02LF 3/8 5/32 .008 .2092 .173
DCMT-32.51LF DCMT 11 T3 04LF 3/8 5/32 1/64 .2004 .173
DCMT-32.52LF DCMT 11 T3 08LF 3/8 5/32 1/32 .1821 .173
DCMT-32.53LF DCMT 11 T3 12LF 3/8 5/32 3/64 .1639 .173
DCMT-431LF DCMT 15 04 04LF 1/2 3/16 1/64 .2732 .217
DCMT-432LF DCMT 15 04 08LF 1/2 3/16 1/32 .2550 .217
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
DPGT-LF DPGT-21.50LF DPGT 07 02 01LF 1/4 3/32 .004 .1410 .110
DPGT-21.50.5LF DPGT 07 02 02LF 1/4 3/32 .008 .1364 .110
DPGT-21.51LF DPGT 07 02 04LF 1/4 3/32 1/64 .1275 .110
DPGT-32.50LF DPGT 11 T3 01LF 3/8 5/32 .004 .2139 .173
DPGT-32.50.5LF DPGT 11 T3 02LF 3/8 5/32 .008 .2092 .173
DPGT-32.51LF DPGT 11 T3 04LF 3/8 5/32 1/64 .2004 .173
DPGT-32.52LF DPGT 11 T3 08LF 3/8 5/32 1/32 .1821 .173
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
DPMW(-F) DPMW-21.50.5F* DPMW 07 02 02F* 1/4 3/32 .008 .1364 .110
DPMW-32.51F* DPMW 11 T3 04F* 3/8 5/32 1/64 .2004 .173
DPMW-32.52F* DPMW 11 T3 08F* 3/8 5/32 1/32 .1821 .173
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
SCMT-UF SCMT-32.52UF SCMT 09 T3 08UF 3/8 5/32 1/32 .0647 .173
53
Screw-On Inserts ®
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
SPMT-UF SPMT-32.51UF SPMT 09 T3 04UF 3/8 5/32 1/64 .0712 .173
54
Screw-On Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
TCMT-MF TCMT-21.52MF TCMT 11 02 08MF 1/4 3/32 1/32 .3438 .110
TCMT-32.52MF TCMT 16 T3 08MF 3/8 5/32 1/32 .5313 .173
TCMT-32.53MF TCMT 16 T3 12MF 3/8 5/32 3/64 .5156 .173
TDHB TDHB-1.280.750.5** TDHB 07T 1,202** .160 3/64 .008 .2293 .094
TDHB-1.280.751** TDHB 07T 1,204** .160 3/64 1/64 .2213 .094
TDHB-1.280.752** TDHB 07T 1,208** .160 3/64 1/32 .2053 .094
TDHH TDHH-1.280.750.5R TDHH 07T 1,202R .160 3/64 .008 .2293 .094
TDHH-1.280.750.5L TDHH 07T 1,202L .160 3/64 .008 .2293 .094
TDHH-1.280.751R TDHH 07T 1,204R .160 3/64 1/64 .2213 .094
TDHH-1.280.751L TDHH 07T 1,204L .160 3/64 1/64 .2213 .094
TDHH-1.280.752R TDHH 07T 1,208R .160 3/64 1/32 .2053 .094
TDHH-1.280.752L TDHH 07T 1,208L .160 3/64 1/32 .2053 .094
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
TPGM(-F) TPGM-21.50 TPGT 11 02 01K 1/4 3/32 .004 .3710 .110
TPGM-21.50.5 TPGT 11 02 02K 1/4 3/32 .008 .3670 .110
TPGM-21.50.5F** TPGT 11 02 02K** 1/4 3/32 .008 .3670 .110
TPGM-21.51 TPGT 11 02 04K 1/4 3/32 1/64 .3594 .110
TPGM-21.51F** TPGT 11 02 04K** 1/4 3/32 1/64 .3594 .110
TPGM-21.52 TPGT 11 02 08K 1/4 3/32 1/32 .3438 .110
TPGM-21.52F** TPGT 11 02 08K** 1/4 3/32 1/32 .3438 .110
TPGM-32.51* TPGH 16 T3 04* 3/8 5/32 1/64 .5469 .173
TPGM-32.52* TPGH 09 T3 08* 3/8 5/32 1/32 .5313 .173
*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.
**Grade KD100 is a single-tipped PCD insert.
56
Screw-On Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9240
insert ISO dimensions
KC730
KD100
KT315
K313
catalog catalog
number number d s rε m d1 l
VBMT-LF VBMT-220.5LF VBMT 11 03 02LF 1/4 1/8 .008 .2721 .110 —
VBMT-221LF VBMT 11 03 04LF 1/4 1/8 1/64 .2544 .110 —
VBMT-222LF VBMT 11 03 08LF 1/4 1/8 1/32 .2180 .110 —
VBMT-330.5LF VBMT 16 04 02LF 3/8 3/16 .008 .4174 .173 —
VBMT-331LF VBMT 16 04 04LF 3/8 3/16 1/64 .3997 .173 —
VBMT-332LF VBMT 16 04 08LF 3/8 3/16 1/32 .3634 .173 —
WCMT-LF WCMT-21.51LF WCMT 04 02 04LF 1/4 3/32 1/64 .0608 .110 .171
WCMT-32.52LF WCMT 06 T3 08LF 3/8 5/32 1/32 .0868 .173 .257
WPMT-LF WPMT-1.51.21LF WPMT S3 T1 04LF 3/16 5/64 1/64 .0434 .085 .128
WPMT-21.51LF WPMT 04 02 04LF 1/4 3/32 1/64 .0608 .110 .171
WPMT-32.51LF WPMT 06 T3 04LF 3/8 5/32 1/64 .0955 .173 .257
WPMT-32.52LF WPMT 06 T3 08LF 3/8 5/32 1/32 .0868 .173 .257
58
Top Notch ®
®
Profiling Inserts
Steel
Stainless Steel
Non-Ferrous
High-Temperature Alloys
59
KENNA PERFECT Top Notch Profiling ®
Medium Machining
NP.5M, NP.5..
NP.5M
Finishing NP.5..
NPGR
Finishing
NP.5.. NOTE: See Technical Section of Catalog 1010
for chipbreaker details (pages 656-657).
NOTE: For expert application guidance, refer to Catalog 1010, page 633.
60
KENNA PERFECT Top Notch Profiling
Stainless Steel — Austenitic
NOTE: For expert application guidance, refer to Catalog 1010, page 633.
Non-Ferrous
NOTE: For expert application guidance, refer to Catalog 1010, page 633.
61
KENNA PERFECT Top Notch Profiling ®
KC5010 200 60
high-temp
alloys
KC5025 170 50
KC8050 230 70
K68/K313 100 30
NOTE: For expert application guidance, refer to Catalog 1010, page 633.
62
Top Notch Profiling Inserts
grades
KC5010
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KC9315
insert ISO dimensions
KD100
KD120
KT315
K313
catalog catalog
K68
number number a s rε m l1
Kendex Mini
grades
ANSI/ISO insert catalog number dimensions
KC720
K68
right hand left hand l a s rε m
NOTE: For expert application guidance, see page 633 in Catalog 1010.
64
Threading Inserts
page
Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
LT Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
65
KENNA PERFECT
Top Notch ®
®
Threading System
4 Easy Steps to Increased
Threading Productivity
Step 1: Select threading method and hand of tooling.
What you need to know:
external/internal operation
spindle rotation
feed direction
Feed Direction Towards the Chuck
insert
L insert insert insert
R L
L
L R R
external left-
R internal left- internal right-
external right-
hand thread hand thread hand thread hand thread
insert
L insert insert insert
L
R L
L
R R
R
external right- external left- internal right- internal left-
hand thread hand thread hand thread hand thread
Step 2:
Select insert.
What you need to know:
thread form
catalog number KC5025 KC5010 hand of insert
NT-2RK ◆ See thread form guide on pages 68-70.
NT-3RK
◆ Select cresting inserts for fully
NT-4RK
controlled thread form including
diameter control. Cresting inserts
eliminate the need for deburring.
◆ Non-cresting partial profile inserts
can cut a variety of thread pitches.
Chip control is only available with
partial profile inserts.
66
4 Easy Steps to Increased
Threading Productivity
Step 3: Select grade and speed.
What you need to know:
workpiece material
operation
Step 4:
Select the toolholder.
What you need to know:
external/internal operation
pitch diameter catalog number gage insert
(for internal operations)
hand of tool NSR-163D NG-3R
insert size NSR-164D* NG-4R
NOTE: Top Notch toolholders and boring bars are listed with
grooving inserts as the gage insert. They are compatible with
threading inserts of the same size.
* Refer to Lathe Tooling Catalog 1010 for a complete listing of
OD toolholders, ID boring bars, and inserts.
NOTE: Optimize your threading operation by using the proper infeed angle and
the recommended infeed values. See the Technical Section of Catalog 1010,
pages 677-678 and 683, for more details.
67
Top Notch Threading ®
• All Top Notch threading inserts are precision ground to • Right-hand Top Notch threading toolholders use
provide accurate edge location and secure locking of right-hand inserts. Left-hand Top Notch threading
the insert in the toolholder pocket. toolholders use left-hand inserts.
• Top Notch threading and grooving inserts can be used • Right-hand Top Notch threading boring bars use
in either toolholders or boring bars. left-hand inserts. Left-hand Top Notch threading
• All non-cresting type threading inserts can be used boring bars use right-hand inserts.
for either external or internal applications. All cresting
type inserts are designated specifically for external
or internal use.
left-hand right-hand
tpi range
thread rake (pitch in mm)
insert style cresting application
form angle
external internal
NT-1L
60°V neutral no none 12 - 24 internal threading in small diameter bores
UN (1,00 - 2,00) • used with boring bars only
class 2 • one cutting edge
ISO
6g/6H
page 72
NT
60°V neutral no size 2 = 8 - 36 size 2 = 7 - 20 general purpose
UN (0,70 - 3,00) (1,25 - 3,50) • a popular threading insert style
class 2 size 3 = 6 - 20 size 3 = 5 - 12 for general use
ISO (1,25 - 4,00) (2,00 - 5,00) • provides satisfactory performance
6g/6H in most applications
page 72
NTP
60°V 5° no size 2 = 8 - 36 size 2 = 7 - 20 general purpose
UN positive (0,70 - 3,00) (1,25 - 3,50) • ground positive rake
class 2 size 3 = 6 - 20 size 3 = 5 - 12 reduces cutting forces
ISO (1,25 - 4,00) (2,00 - 5,00) • recommended for
6g/6H threading aluminum and
page 72 difficult-to-machine materials
NT-K
60°V 10° no size 2 = 8 - 36 size 2 = 7 - 20 general purpose with chip control
UN positive (0,70 - 3,00) (1,25 - 3,50) • threading insert with chip control
class 2 chip size 3 = 6 - 20 size 3 = 5 - 12 and positive cutting action
ISO control (1,25 - 4,00) (2,00 - 5,00) • especially helpful for
6g/6H internal threading operations
page 73
NTF
60°V neutral no size 2 = 14 - 44 size 2 = 12 - 24 fine pitches, close to shoulder operations
UN (0,60 - 1,75) (1,00 - 2,00) • smaller nose radius than
class 2 size 3 = 10 - 44 size 3 = 9 - 24 general purpose inserts
ISO (0,60 - 2,50) (1,00 - 2,50) • use this style insert only
6g/6H when required for the operation
page 73
NTK
60° V 5° no size 2 = 14 - 44 size 2 = 12 - 24 fine pitches, close to shoulder operations
UN positive (0,60 - 1,75) (1,00 - 2,00) • ground positive rake
class 2 size 3 = 10 - 44 size 3 = 9 - 24 • smaller nose radius than general
ISO (0,60 - 2,50) (1,00 - 2,50) purpose inserts
6g/6H • use this insert only when required
page 73 for the operation
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
68
Top Notch Threading
Top Notch Thread Form Guide (cont'd)
tpi range
thread rake (pitch in mm)
insert style cresting application
form angle
external internal
60° American UN
NTC
60° V neutral yes each insert each insert cresting style for UN inch threads
UN produces a produces a • offers the best possible tool life for
class 2 specific tpi specific tpi the application
• produces the best surface finish, and
accurate thread depth
page 74
NTC
ISO neutral yes each insert each insert cresting style for metric threads
6g/6H produces a produces a • offers the best possible tool life for
specific pitch specific pitch the application
• produces the best surface finish and
accurate thread depth
page 74
60° UNJ
NJ
60° V neutral no each insert use a class 2 UNJ external threads
UNJ produces a insert, then finish • close tolerance on nose radius to control
class 3 specific tpi bore the minor thread root radius
diameter • meets or exceeds SPEC MIL-S-8879C
page 75
NJP
60° V 5° no each insert use a class 2 UNJ external threads
UNJ positive produces a insert, then finish • ground positive rake
class 3 specific tpi bore the minor • close tolerance on nose radius to control
diameter thread root radius
page 75 • meets or exceeds SPEC MIL-S-8879C
NJF
60° V neutral no each insert use a class 2 UNJ external threads, fine pitches, close to shoulder
UNJ produces a insert, then finish • close to shoulder applications
class 3 specific tpi bore the minor • close tolerance on nose radius to control
diameter thread root radius
page 75 • meets or exceeds SPEC MIL-S-8879C
NJK
60° V 5° no each insert use a class 2 UNJ external threads, fine pitches, close to shoulder
UNJ positive produces a insert, then finish • ground positive rake
class 3 specific tpi bore the minor • close to shoulder applications
diameter • close tolerance on nose radius to control
thread root radius
page 75 • meets or exceeds SPEC MIL-S-8879C
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
69
Top Notch Threading ®
tpi range
insert thread rake (pitch in mm)
cresting application
style form angle
external internal
60° NPT/NPTF
NDC-V
60° V neutral yes each insert each insert national pipe threads
NPT produces a produces a • offers the best possible tool life
specific tpi specific tpi for the application
• produces the best surface
finish, and accurate thread depth
• for tapered threads where
page 76 fluid tightness is required
NWC
55° V neutral yes each insert each insert Whitworth
produces a produces a • offers the best possible tool life
specific tpi specific tpi for the application
• produces the best surface
page 76 finish, and accurate thread depth
Specials
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
70
Kennametal Threading Systems
Top Notch Threading Insert Identification System
3. 5.
Additional Industry Thread 7.
1. Information Identification Definition of
Type of Insert Insert
B — Buttress Position indicates API or
N — Top Notch F — fine pitch "drilling industry "(e.g.—10RD,
8RD, .038) • threads per inch
S — Stub Acme or pitch (for metric)
or
C — cresting Controlled root radius threading • “A” or “B” type
P — positive rake inserts indicate the root radius Buttress insert
K — fine pitch, positive in .001 increments • taper per foot—
(NJ, NJF, NJP, NJK). API threads
U — utility**
N J F – 3 ▫▫▫ R 12 ▫
2. 4. 6. 8.
Insert Style Insert Size Hand of Insert Additional
A — Acme R — right
Information
B — blank (special forms) L — left
I — internal thread
D — API or NPT
E — external thread
J — UNJ thread (used only if internal
T — 60° V thread and external thread
U — undercutting or relieving
insert forms are different)
s
number M — multiple tooth
W — 55° V Whitworth
1 .100 K — standard chip control
2 .150 C — coarse pitch
3 .195 D — Dry Seal
* Kennametal proprietary standard only. 4 .255
** Utility threading inserts can only be used in 5 .380
NSUR/L utility holders. 6 .383
8 .438
NJF NTC
a s
insert
size
inch mm inch mm
71
Top Notch Threading Inserts ®
KC5010
KC5025
KC5410
rε* e* pitch (mm) tpi
right hand left hand
K313
K68
inch mm inch mm ext. int. ext. int.
KC5010
KC5025
KC5410
rε* e* pitch (mm) tpi
right hand left hand
K313
K68
inch mm inch mm ext. int. ext. int.
NTF NTF-2R .002 0,05 .110 2,79 (0,6-1,75) (1,0-2,0) 14-44 12-24
NTF-2L .004 0,10
NTF-3R .002 0,05 .141 3,58 (0,6-2,5) (1,0-2,5) 10-44 9-24
NTF-3L .004 0,10
NTK NTK-2R .002 0,05 .110 2,79 (0,6-1,75) (1,0-2,0) 14-44 12-24
NTK-2L .004 0,10
NTK-3R .002 0,05 .141 3,58 (0,6-2,5) (1,0-2,5) 10-44 9-24
NTK-3L .004 0,10
KC5010
KC5025
KC5410
rε* e* pitch (mm) tpi
right hand left hand
K313
K68
inch mm inch mm ext. int. ext. int.
KC5010
KC5025
KC5410
rε* e* pitch (mm) tpi
right hand left hand
K313
K68
inch mm inch mm ext. int. ext. int.
KC5010
KC5025
KC5410
rε* e*
right hand left hand
K313
tpf tpi
K68
inch mm inch mm
American UN . . . . . . . . . . . . . 86
ISO Metric . . . . . . . . . . . . . . . . . 88
UNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NPT . . . . . . . . . . . . . . . . . . . . . . . . . 91
NPTF. . . . . . . . . . . . . . . . . . . . . . . . . 92
BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
77
KENNA PERFECT LT Threading System
5 Easy Steps to Increased
LT Threading Productivity
Step 1:
Select threading method and hand of tooling.
standard helix – preferred method
What you need to know:
L
■ external/internal R L
L
operation L
R R
■ spindle rotation R
Step 2:
Select insert.
What you need to know: catalog number IC KC5025 KC5010
general purpose style general purpose style general purpose style general purpose style
CB-style chip control inserts are not available with some thread
forms. In those cases, flat top inserts can be substituted.
Step 5:
Select the shim.
What you need to know:
■ thread form (tpi or pitch)
■ pitch diameter
(standard helix)
■ helix method
If different from shim
supplied with toolholder,
order shim separately.
(reverse helix)
Additional shim selection guidelines can be found in the threading Technical Data Section of Catalog 1010.
79
LT Thread Form Guide ®
• All LT inserts are precision ground to • Non-cresting partial profile inserts offer
provide accurate thread forms and the flexibility to cut a variety of thread
indexing. pitches with one insert.
external
• Both cresting and non-cresting partial • Right-hand LT toolholders use right-
profile inserts are specifically designed hand inserts. Left-hand LT toolholders
for either external or internal threading use left-hand inserts.
operations.
• Right-hand LT boring bars use right-
• CB-style inserts provide chip control hand inserts. Left-hand LT boring bars
which is especially important in internal use left-hand inserts.
operations where stringy chips can internal
accumulate and cause poor finish or
edge chipping.
pages 84-85
LT-60 60° V UN 2° no size 16 = 8 - 48 size 11 = 16 - 48 general purpose
class 2 positive (0,5 - 3,00) (0,5 - 1,5) • flexible form capability makes this insert a popular choice for
ISO 6g/6H size 16 = 8 - 48 general use
(0,5 - 3,0) • provides satisfactory performance in most applications
pages 84-85
60° American UN
LT-UNCB 60° V UN 2° yes each insert each insert cresting style with chip control for UN inch threads
class 2 positive produces a produces a • offers the best possible tool life and chip control for the application
specific tpi specific tpi • produces a high-quality surface finish and accurate thread depth
• chip control capability makes this a first choice for internal threading
operations
pages 86-87
LT-UN 60° V UN 2° yes each insert each insert cresting style for UN inch threads
class 2 positive produces a produces a • offers excellent tool life and surface finish, with accurate
specific tpi specific tpi thread depth
pages 86-87
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
80
LT Threading Inserts
pages 88-89
60° UNJ
LT-UNJ 60° V 2° yes each insert each insert cresting style for UNJ threads
UNJ class positive produces a produces a • accurate radius and thread form control for excellent tool life
3 (3A/3B) specific tpi specific tpi and high-quality threads
• meets or exceeds SPEC MIL S-8879C
page 90
60° National Pipe Threads
LT-NPTCB 60° V 2° yes each insert each insert for National Pipe Threads with chip control
NPT positive produces a produces a • offers the best possible tool life with accurate thread depth control
specific tpi specific tpi • chip control geometry helps manage chips and maintains a
high-quality, unmarred surface finish
• for tapered threads where fluid tightness is required
page 91
LT-NPT 60° V 2° yes each insert each insert National Pipe Threads
NPT positive produces a produces a • offers excellent tool life and surface finish, with accurate
specific tpi specific tpi thread depth
• for tapered threads where fluid tightness is required
page 91
LT-NPTFCB 60° V 2° yes each insert each insert for National Pipe Threads-Dry Seal with chip control
NPTF positive produces a produces a • offers the best tool life with accurate thread depth control
specific tpi specific tpi • chip control geometry helps manage chips and maintains a
high-quality, unmarred surface finish
• for tapered Dry Seal threads
page 92
LT-NPTF 60° V 2° yes each insert each insert National Pipe Threads-Dry Seal
NPTF positive produces a produces a • offers excellent tool life and surface finish, with accurate
specific tpi specific tpi thread depth
• for tapered Dry Seal threads
page 92
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
81
LT Threading Inserts ®
page 93
55° Whitworth for BSW, BSP
LT-WCB 55° V 2° yes each insert each insert cresting style with chip control for Whitworth threads
Whitworth positive produces a produces a • offers the best possible tool life and chip control for the application
specific tpi specific tpi • produces a high-quality surface finish and accurate thread depth
• best for internal threading operations
pages 94-95
LT-W 55° V 2° yes each insert each insert cresting style for Whitworth threads
Whitworth positive produces a produces a • offers excellent tool life and surface finish, with accurate thread depth
specific tpi specific tpi
pages 94-95
55° BSPT
LT-BSPT 55° V 2° yes each insert each insert cresting style for British Standard Pipe Threads
BSPT positive produces a produces a • offers excellent tool life and surface finish, with accurate thread depth
specific tpi specific tpi
• for tapered threads where fluid tightness is required
page 96
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
82
Kennametal Threading Systems
LT Threading Insert Identification System
5.
Thread Profile
ISO — ISO metric
UN — American UN
60 — Partial Profile non-cresting 60°
55 — Partial Profile non cresting 55°
W — Whitworth 55°
BSPT — British Standard Pipe Thread
1. NPT — American National Pipe Thread
Type of Insert ACME — American Acme
3. STACME — American Stub Acme
laydown threading Hand of Insert TR — Trapez DIN 103
RD — Round DIN 405
ER — external right hand UNJ — Controlled root radius
EL — external left hand NPTF — Dry Seal
NR — internal right hand API — American Petroleum Institute Threads
NL — internal left hand BUT — API Buttress Casing
LT – 16 ER – 20 UN CB
2. 4. 6.
Cutting Edge Thread Pitch Chip Control
Length (Size)
partial profile
thread pitch
designation tpi
(mm)
A 0,5 - 1,5 48 - 16
AG 0,5 - 3,0 48 - 8 CB — chipbreaker
l-size d □ — flat top
G 1,75 - 3,0 14 - 8
(mm) (inch) N 3,5 - 5,0 7-5
The Kennametal
LT Advantage:
Every box of 10 inserts includes a
Torx wrench and locking screw.
83
LT Threading Inserts ®
KC5025
KC5010
right hand left hand d tpi pitch l s d1 x y
(mm) inch (mm)
LT-ER-60CB LT-16ER-AG60CB — 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .035 .059
LT-ER/L-60 LT-16ER-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16EL-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16ER-AG60 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .047 .067
LT-16EL-AG60 3/8 48-8 0,5 - 3,0 .003 0,08 .650 .143 .155 .047 .067
LT-16ER-G60 3/8 14-8 1,75 - 3,0 .011 0,27 .650 .143 .155 .047 .067
LT-16EL-G60 3/8 14-8 1,75 - 3,0 .011 0,27 .650 .143 .155 .047 .067
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
84
LT Threading Inserts
Partial Profile 60° — Internal
KC5025
KC5010
right hand left hand d tpi pitch l s d1 x y
(mm) inch (mm)
LT-NR-60CB LT-11NR-A60CB — 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .024 .031
LT-16NR-AG60CB — 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .035 .059
LT-16NR-G60CB — 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .043 .059
LT-NR/L-60 LT-11NR-A60 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035
LT-11NL-A60 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035
LT-16NR-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16NL-A60 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16NR-AG60 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .047 .067
LT-16NL-AG60 3/8 48-8 0,5 - 3,0 .002 0,05 .650 .143 .155 .047 .067
LT-16NR-G60 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .047 .067
LT-16NL-G60 3/8 14-8 1,75 - 3,0 .006 0,16 .650 .143 .155 .047 .067
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
85
LT Threading Inserts ®
American UN — External
Standard:
ANSI B1.1:74
Tolerance Class:
2A/2B
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
86
LT Threading Inserts
American UN — Internal
Standard:
ANSI B1.1:74
Tolerance Class:
2A/2B
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
87
LT Threading Inserts ®
Standard:
R262 (DIN 13)
Tolerance Class:
6g/6H
grades
thread
KC5025
KC5010
right hand left hand d pitch l s d1 x y hmin
(mm)
LT-ER-ISOCB LT-16ER-0.5ISOCB — 3/8 0,5 .650 .143 .155 .047 .024 .012
LT-16ER-0.75ISOCB — 3/8 0,75 .650 .143 .155 .047 .024 .018
LT-16ER-1.0ISOCB — 3/8 1,0 .650 .143 .155 .028 .031 .024
LT-16ER-1.25ISOCB — 3/8 1,25 .650 .143 .155 .043 .031 .030
LT-16ER-1.5ISOCB — 3/8 1,5 .650 .143 .155 .028 .031 .036
LT-16ER-1.75ISOCB — 3/8 1,75 .650 .143 .155 .047 .059 .042
LT-16ER-2.0ISOCB — 3/8 2,0 .650 .143 .155 .047 .059 .048
LT-16ER-2.5ISOCB — 3/8 2,5 .650 .143 .155 .047 .059 .060
LT-16ER-3.0ISOCB — 3/8 3,0 .650 .143 .155 .051 .059 .072
LT-ER/L-ISO LT-16ER-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012
LT-16EL-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012
LT-16ER-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018
LT-16EL-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018
LT-16ER-1.0ISO 3/8 1,0 .650 .143 .155 .027 .027 .024
LT-16EL-1.0ISO 3/8 1,0 .650 .143 .155 .027 .027 .024
LT-16ER-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030
LT-16EL-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030
LT-16ER-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036
LT-16EL-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036
LT-16ER-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042
LT-16EL-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042
LT-16ER-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048
LT-16EL-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048
LT-16ER-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060
LT-16EL-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060
LT-16ER-3.0ISO 3/8 3,0 .650 .143 .155 .047 .063 .072
LT-16EL-3.0ISO 3/8 3,0 .650 .143 .155 .047 .063 .072
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
88
LT Threading Inserts
ISO Metric — Internal
Standard:
R262 (DIN 13)
Tolerance Class:
6g/6H
grades
thread
KC5025
KC5010
right hand left hand d pitch l s d1 x y hmin
(mm)
LT-NR-ISOCB LT-11NR-0.5ISOCB — 1/4 0,5 .433 .126 .128 .047 .024 .012
LT-11NR-0.75ISOCB — 1/4 0,75 .433 .126 .128 .047 .024 .018
LT-11NR-1.0ISOCB — 1/4 1,0 .433 .126 .128 .028 .031 .024
LT-11NR-1.25ISOCB — 1/4 1,25 .433 .126 .128 .028 .031 .030
LT-11NR-1.5ISOCB — 1/4 1,5 .433 .126 .128 .028 .031 .036
LT-16NR-1.0ISOCB — 3/8 1,0 .650 .143 .155 .028 .031 .024
LT-16NR-1.25ISOCB — 3/8 1,25 .650 .143 .155 .028 .031 .030
LT-16NR-1.5ISOCB — 3/8 1,5 .650 .143 .155 .028 .031 .036
LT-16NR-1.75ISOCB — 3/8 1,75 .650 .143 .155 .047 .059 .042
LT-16NR-2.0ISOCB — 3/8 2,0 .650 .143 .155 .047 .059 .048
LT-16NR-2.5ISOCB — 3/8 2,5 .650 .143 .155 .047 .059 .060
LT-NR/L-ISO LT-11NR-0.5ISO 1/4 0,5 .433 .126 .128 .024 .024 .012
LT-11NL-0.5ISO 1/4 0,5 .433 .126 .128 .024 .024 .012
LT-11NR-0.75ISO 1/4 0,75 .433 .126 .128 .024 .024 .018
LT-11NL-0.75ISO 1/4 0,75 .433 .126 .128 .024 .024 .018
LT-11NR-1.0ISO 1/4 1,0 .433 .126 .128 .024 .027 .024
LT-11NL-1.0ISO 1/4 1,0 .433 .126 .128 .024 .027 .024
LT-11NR-1.25ISO 1/4 1,25 .433 .126 .128 .031 .035 .030
LT-11NL-1.25ISO 1/4 1,25 .433 .126 .128 .031 .035 .030
LT-11NR-1.5ISO 1/4 1,5 .433 .126 .128 .031 .039 .036
LT-11NL-1.5ISO 1/4 1,5 .433 .126 .128 .031 .039 .036
LT-11NR-1.75ISO 1/4 1,75 .433 .126 .128 .035 .043 .042
LT-11NL-1.75ISO 1/4 1,75 .433 .126 .128 .035 .043 .042
LT-11NR-2.0ISO 1/4 2,0 .433 .126 .128 .035 .043 .048
LT-11NL-2.0ISO 1/4 2,0 .433 .126 .128 .035 .043 .048
LT-16NR-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012
LT-16NL-0.5ISO 3/8 0,5 .650 .143 .155 .024 .024 .012
LT-16NR-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018
LT-16NL-0.75ISO 3/8 0,75 .650 .143 .155 .024 .024 .018
LT-16NR-1.0ISO 3/8 1,0 .650 .143 .155 .024 .027 .024
LT-16NL-1.0ISO 3/8 1,0 .650 .143 .155 .024 .027 .024
LT-16NR-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030
LT-16NL-1.25ISO 3/8 1,25 .650 .143 .155 .031 .035 .030
LT-16NR-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036
LT-16NL-1.5ISO 3/8 1,5 .650 .143 .155 .031 .039 .036
LT-16NR-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042
LT-16NL-1.75ISO 3/8 1,75 .650 .143 .155 .035 .047 .042
LT-16NR-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048
LT-16NL-2.0ISO 3/8 2,0 .650 .143 .155 .039 .051 .048
LT-16NR-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060
LT-16NL-2.5ISO 3/8 2,5 .650 .143 .155 .043 .059 .060
LT-16NR-3.0ISO 3/8 3,0 .650 .143 .155 .043 .059 .072
LT-16NL-3.0ISO 3/8 3,0 .650 .143 .155 .043 .059 .072
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
89
LT Threading Inserts ®
UNJ — External
Standard:
MIL-S-8879C
Tolerance Class:
3A/3B
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
UNJ — Internal
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
90
LT Threading Inserts
NPT — External
Standard:
USAS B2.1:1968
Tolerance Class:
Standard NPT
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-ER-NPTCB LT-16ER-14NPTCB — 3/8 14 .75 .650 .143 .155 .047 .059 .052
LT-ER/L-NPT LT-16ER-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026
LT-16EL-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026
LT-16ER-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040
LT-16EL-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040
LT-16ER-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052
LT-16EL-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052
LT-16ER-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065
LT-16EL-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065
LT-16ER-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095
LT-16EL-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095
NPT — Internal
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-NR-NPTCB LT-16NR-14NPTCB — 3/8 14 .75 .650 .143 .155 .043 .059 .052
LT-16NR-11.5NPTCB — 3/8 11.5 .75 .650 .143 .155 .039 .059 .065
LT-NR/L-NPT LT-11NR-27NPT 1/4 27 .75 .433 .126 .128 .027 .031 .026
LT-11NL-27NPT 1/4 27 .75 .433 .126 .128 .027 .031 .026
LT-11NR-18NPT 1/4 18 .75 .433 .126 .128 .031 .039 .040
LT-11NL-18NPT 1/4 18 .75 .433 .126 .128 .031 .039 .040
LT-11NR-14NPT 1/4 14 .75 .433 .126 .128 .031 .039 .052
LT-11NL-14NPT 1/4 14 .75 .433 .126 .128 .031 .039 .052
LT-16NR-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026
LT-16NL-27NPT 3/8 27 .75 .650 .143 .155 .027 .031 .026
LT-16NR-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040
LT-16NL-18NPT 3/8 18 .75 .650 .143 .155 .031 .039 .040
LT-16NR-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052
LT-16NL-14NPT 3/8 14 .75 .650 .143 .155 .035 .047 .052
LT-16NR-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065
LT-16NL-11.5NPT 3/8 11.5 .75 .650 .143 .155 .043 .059 .065
LT-16NR-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095
LT-16NL-8NPT 3/8 8 .75 .650 .143 .155 .051 .071 .095
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
91
LT Threading Inserts ®
NPTF — External
Standard:
ANSI B1.20.3-1976
Tolerance Class:
Class 2
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-ER-NPTFCB LT-16ER-11.5NPTFCB — 3/8 11.5 .75 .650 .143 .155 .043 .059 .064
LT-ER/L-NPTF LT-16ER-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053
LT-16EL-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053
LT-16ER-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .453
LT-16EL-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .453
NPTF — Internal
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-NR/L-NPTF LT-11NR-14NPTF 1/4 14 .75 .433 .126 .128 .031 .039 .053
LT-11NL-14NPTF 1/4 14 .75 .433 .126 .128 .031 .039 .053
LT-16NR-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053
LT-16NL-14NPTF 3/8 14 .75 .650 .143 .155 .035 .047 .053
LT-16NR-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .064
LT-16NL-11.5NPTF 3/8 11.5 .75 .650 .143 .155 .043 .059 .064
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
92
LT Threading Inserts
Partial Profile 55° — External
KC5025
KC5010
right hand left hand d tpi pitch l s d1 x y
(mm)
inch (mm)
LT-ER/L- 55 LT-16ER-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16EL-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16ER-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067
LT-16EL-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067
LT-16ER-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067
LT-16EL-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067
KC5025
KC5010
right hand left hand d tpi pitch l s d1 x y
(mm) inch (mm)
LT-NR/L-55 LT-11NR-A55 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035
LT-11NL-A55 1/4 48-16 0,5 - 1,5 .002 0,05 .433 .126 .128 .031 .035
LT-16NR-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16NL-A55 3/8 48-16 0,5 - 1,5 .002 0,05 .650 .143 .155 .031 .035
LT-16NR-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067
LT-16NL-AG55 3/8 48-8 0,5 - 3,0 .003 0,07 .650 .143 .155 .047 .067
LT-16NR-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067
LT-16NL-G55 3/8 14-8 1,75 - 3,0 .008 0,21 .650 .143 .155 .047 .067
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
93
LT Threading Inserts ®
Standard:
B.S.84:1956, DIN 259,
ISO228/1:1982
Tolerance Class:
Medium Class A
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
94
LT Threading Inserts
Whitworth BSW, BSP — Internal
Standard:
B.S.84:1956, DIN 259,
ISO228/1:1982
Tolerance Class:
Medium Class A
grades
KC5025
KC5010
right hand left hand d tpi l s d1 x y hmin
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
95
LT Threading Inserts ®
BSPT — External
Standard:
B.S.21:1985
Tolerance Class:
Standard BSPT
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-ER/L-BSPT LT-16ER-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046
LT-16EL-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046
LT-16ER-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058
LT-16EL-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
BSPT — Internal
grades
taper
KC5025
KC5010
right hand left hand d tpi per foot l s d1 x y hmin
(tpf)
LT-NR/L-BSPT LT-11NR-14BSPT 1/4 14 .75 .433 .126 .128 .035 .039 .046
LT-11NL-14BSPT 1/4 14 .75 .433 .126 .128 .035 .039 .046
LT-16NR-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046
LT-16NL-14BSPT 3/8 14 .75 .650 .143 .155 .039 .047 .046
LT-16NR-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058
LT-16NL-11BSPT 3/8 11 .75 .650 .143 .155 .043 .059 .058
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions non-ferrous
... Preferred choice for unfavorable conditions high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of O.D. toolholders, I.D. boring bars and inserts.
96
Grooving Inserts
page
A3 Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
A2 Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
97
KENNA PERFECT
Top Notch Grooving ®
®
STEP 2:
Choose your toolholder based on the application. Please note that holders
are available in conventional square shank as well as quick-change versions.
Take special note of the insert size based on the groove width.
■ For OD grooving and face grooving, see page 172.
■ For ID grooving applications, see pages 191-193.
STEP 3:
Select the proper chipbreaker and feed rate for the application and
material to be machined. See table below. Note for future reference.
A3
TopChipbreakers & Feed
Notch Chipbreakers and Rates
Feed Rates – in/rev (mm/rev)
workpiece
material stainless high-temp
application steel non-ferrous
steel alloys
example
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders,
ID boring bars, and inserts.
98
STEP 4:
Choose grade and speed based on the material
and cutting conditions to be encountered.
STEP 5:
Select insert and holder from catalog pages which meet the above criteria.
Note the insert size. Match the size to your toolholder selection.
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
99
Top Notch Grooving Inserts ®
• All Top Notch grooving inserts are precision • Right-hand Top Notch grooving toolholders
ground to provide accurate edge location and use right-hand inserts. Left-hand Top Notch
secure locking of the insert in the toolholder grooving toolholders use left-hand inserts.
pocket. • Right-hand Top Notch grooving boring bars
• Top Notch threading and grooving inserts can use left-hand inserts. Left-hand Top Notch
be used in either toolholders or boring bars. grooving boring bars use right-hand inserts.
left-hand right-hand
NG-K • chip control geometry 10° size 2 = .031 to .128 • inch and metric widths standard
• general purpose grooving positive size 3 = .039 to .189 • chip control works well under a
• o-ring grooving variety of machining conditions
• circlip grooving • strong Top Notch design allows
• light turning light axial turning in two directions
pages 104-105
NG • general purpose grooving neutral size 1 = .031 to .094 • popular general purpose grooving insert
• o-ring grooving size 2 = .031 to .125 • inch and metric widths standard
• circlip grooving size 3 = .047 to .189
pages 105-106
NGP • general purpose grooving 5° size 2 = .031 to .125 • ground positive rake
• o-ring grooving positive size 3 = .088 to .189 reduces cutting forces
• circlip grooving • recommended for grooving aluminum
and difficult-to-machine materials
page 106
NGD-K • chip control geometry 10° size 3 = .062 to .189 • deep grooving up to 1/2" deep
• deep grooving positive • chip control works well under a
• light turning variety of machining conditions
• strong Top Notch design allows
light axial turning in two directions
page 107
NGD • deep grooving neutral size 3 = .189 • deep grooving up to 1/2" deep
• for customers who prefer to regrind
the width of the insert
page 107
NR-K • chip control geometry 10° radius size • excellent choice for plunge grooving,
positive size 3 = .031 to .078 turning, and profiling
• chip control effective at higher
feed rates
page 107
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
100
Top Notch Grooving Inserts
Top Notch Grooving Application Guide
NR • full radius end form neutral radius size • a popular insert for full radius grooving
• general purpose grooving size 2 = .031 to .062 • strong Top Notch design allows
• general purpose profiling size 3 = .031 to .094 light turning and profiling in two directions
page 107
NRP • full radius end form 5° radius size • ground positive rake reduces
• general purpose grooving positive size 3 = .031 to .094 cutting forces
• general purpose profiling • recommended for machining
aluminum and difficult-to-machine materials
page 108
NRD • deep grooving neutral radius size • deep grooving with a full radius up
• full radius endform size 3 = .031 to .062 to 1/2" deep
• strong Top Notch design allows
light axial turning/profiling in two directions
page 108
NF • face grooving neutral size 3 = .125 to .188 • face grooving where extra side
clearance is required for small diameters
• NG-style inserts may be used to
face groove large diameters
page 108
NF-K • face grooving 10° size 3 = .125 to .156 • face grooving, with chip control,
with chip control positive where extra side clearance is required for
small diameters
• NG-style inserts may be used to
face groove large diameters
page 108
NFD-K • deep face grooving 10° size 3 = .125 • deep face grooving, with chip
with chip control positive control, up to 1/2" deep
• use where extra side clearance is
required for small diameters
• NGD-K style inserts may be used
to face groove large diameters
page 109
NFD-KI • internal deep face grooving 10° size 3 = .125 to .189 • use in boring bars to generate
with chip control positive face grooves in the bottom of a bore
page 109
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
101
Top Notch Grooving Inserts ®
NP-K • turning 10° available in: • designed for light turning, backturning,
NPD-K • backturning positive size 2 profiling, and other operations with
• profiling with chip control size 3 chip control
• usually applied on small automatic lathes
page 109
page 110
NBD • blanks for deep grooving — available in: • use in making special inserts for
size 2 deep grooving applications
size 3 • one cutting edge
• rigid design
page 110
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
All Top Notch special inserts benefit special insert design. For convenience, Whatever your special grooving
from the superior rigidity of our Top Notch a concept drawing is always available requirements may be, Kennametal
toolholder and clamping system. For to facilitate engineering development of can provide an effective solution. We
added productivity, most specials can be an insert. have the technical expertise, resources,
incorpor-ated into the double-ended inserts. There are limitless variations of the and commitment to help you develop
All of our specials start with proven flat-top Top Notch design. In addition, chip insert designs which satisfy your
Kennametal carbide grade technology as control in the most common styles allows metalcutting application demands.
the basis for optimizing tool performance. true optimization and productivity. Common examples of forms are shown in
Positive top rake angles are also available Kennametal offers NB- and NBD-style Catalog 1010, page 239.
in most of our inserts. State-of-the-art insert blanks as well. These blanks can
CAD allows rapid development of your be end form ground in your own shop.
102
Top Notch Grooving Inserts
Top Notch Grooving Insert Identification System
1. 5.
Type of Insert 3. Metric 7. 9.
N — Top Notch Additional Identification Hand of Definition
Information M — metric insert groove Insert of Insert
width (position used
N* D — deep grooving only for metric L — left groove size “J ” or “ L” —
P — positive products) R — right for Poly Vee inserts
N G P 3 ▫ 125 R K
**6. 8.
▫
2. 4.
Insert Style Insert Size Insert Groove Chipbreaker
B— blank (for special forms)
Width Design
F— face grooving Position pertains to groove K — standard chip
G— grooving width and radii for F, G, and control
P— backturning R-style grooving inserts
(0,01 mm/.001") increments.
R— full radius insert
s(mm) s(in.) Metric example: 3,25 mm
U— undercutting (or relieving) number width groove or radius
V— Poly Vee 1 2,54 .100 equals “325” catalog
2 3,81 .150 position number
3 4,95 .195 Inch example: 1/32" groove
* Kennametal proprietary identification system 4 6,48 .255 width or radius equals “031”
** Omit position for Top Notch NB-style blanks. 5 9,65 .380 catalog position number
6 9,73 .383
103
Top Notch Grooving Inserts ®
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm mm inch mm
±.001 ±.005
NG-K NG-2031RK .031 0,79 .002 0,05 .050 1,27 .030 0,76
NG-2031LK .005 0,13
NG-2M080RK .031 0,80 .002 0,05 .050 1,27 .030 0,76
NG-2M080LK .005 0,13
NG-2M100RK .039 1,00 .002 0,05 .050 1,27 .030 0,76
NG-2M100LK .005 0,13
NG-2047RK .047 1,19 .002 0,05 .050 1,27 .030 0,76
NG-2047LK .005 0,13
NG-2M120RK .047 1,20 .002 0,05 .050 1,27 .030 0,76
NG-2M120LK .005 0,13
NG-2M140RK .055 1,40 .002 0,05 .050 1,27 .030 0,76
NG-2M140LK .005 0,13
NG-2M150RK .059 1,50 .005 0,13 .110 2,79 .043 1,09
NG-2M150LK .010 0,25
NG-2062RK .062 1,57 .005 0,13 .110 2,79 .043 1,09
NG-2062LK .010 0,25
NG-2M170RK .067 1,70 .005 0,13 .110 2,79 .043 1,09
NG-2M170LK .010 0,25
NG-2M175RK .069 1,75 .005 0,13 .110 2,79 .043 1,09
NG-2M175LK .010 0,25
NG-2M195RK .077 1,95 .005 0,13 .110 2,79 .043 1,09
NG-2M195LK .010 0,25
NG-2M200RK .079 2,00 .005 0,13 .110 2,79 .043 1,09
NG-2M200LK .010 0,25
NG-2M220RK .087 2,20 .005 0,13 .110 2,79 .043 1,09
NG-2M220LK .010 0,25
NG-2M225RK .089 2,25 .005 0,13 .110 2,79 .043 1,09
NG-2M225LK .010 0,25
NG-2094RK .094 2,39 .005 0,13 .110 2,79 .043 1,09
NG-2094LK .010 0,25
NG-2M250RK .098 2,50 .005 0,13 .110 2,79 .043 1,09
NG-2M250LK .010 0,25
NG-2M275RK .108 2,75 .005 0,13 .110 2,79 .043 1,09
NG-2M275LK .010 0,25
NG-2M300RK .118 3,00 .005 0,13 .110 2,79 .043 1,09
NG-2M300LK .010 0,25
NG-2125RK .125 3,18 .005 0,13 .110 2,79 .043 1,09
NG-2125LK .010 0,25
NG-2M325RK .128 3,25 .005 0,13 .110 2,79 .043 1,09
NG-2M325LK .010 0,25
NG-3M100RK .039 1,00 .005 0,13 .075 1,90 .030 0,76
NG-3M100LK .010 0,25
NG-3047RK .047 1,19 .005 0,13 .075 1,90 .030 0,76
NG-3047LK .010 0,25
NG-3M120RK .047 1,20 .005 0,13 .075 1,90 .030 0,76
NG-3M120LK .010 0,25
NG-3M150RK .059 1,50 .005 0,13 .094 2,39 .040 1,02
NG-3M150LK .010 0,25
NG-3062RK .062 1,57 .005 0,13 .094 2,39 .040 1,02
NG-3062LK .010 0,25
NG-3M175RK .069 1,75 .005 0,13 .094 2,39 .040 1,02
NG-3M175LK .010 0,25
NG-3072RK .072 1,83 .005 0,13 .094 2,39 .040 1,02
NG-3072LK .010 0,25
NG-3078RK .078 1,98 .005 0,13 .094 2,39 .040 1,02
NG-3078LK .010 0,25
NG-3M200RK .079 2,00 .005 0,13 .094 2,39 .040 1,02
NG-3M200LK .010 0,25
NG-3M220RK .087 2,20 .005 0,13 .094 2,39 .040 1,02
NG-3M220LK .010 0,25
NG-3M225RK .089 2,25 .005 0,13 .094 2,39 .040 1,02
NG-3M225LK .010 0,25
NG-3094RK .094 2,39 .005 0,13 .150 3,81 .040 1,02
NG-3094LK .010 0,25
NG-3M250RK .098 2,50 .005 0,13 .150 3,81 .040 1,02
NG-3M250LK .010 0,25
NG-3M275RK .108 2,75 .005 0,13 .150 3,81 .040 1,02
NG-3M275LK .010 0,25
NG-3M300RK .118 3,00 .005 0,13 .150 3,81 .040 1,02
NG-3M300LK .010 0,25
NG-3125RK .125 3,18 .005 0,13 .150 3,81 .040 1,02
NG-3125LK .010 0,25
104
Top Notch Grooving Inserts
insert catalog number dimensions grades
rε
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm mm inch mm
±.001 ±.005
NG-K NG-3M320RK .126 3,20 .005 0,13 .150 3,81 .040 1,02
NG-3M320LK .010 0,25
NG-3M325RK .128 3,25 .005 0,13 .150 3,81 .040 1,02
NG-3M325LK .010 0,25
NG-3M350RK .138 3,50 .010 0,25 .150 3,81 .040 1,02
NG-3M350LK .015 0,38
NG-3156RK .156 3,96 .005 0,13 .150 3,81 .115 2,92
NG-3156LK .010 0,25
NG-3M400RK .157 4,00 .010 0,25 .150 3,81 .115 2,92
NG-3M400LK .015 0,38
NG-3M425RK .167 4,25 .010 0,25 .150 3,81 .115 2,92
NG-3M425LK .015 0,38
NG-3M450RK .177 4,50 .010 0,25 .150 3,81 .115 2,92
NG-3M450LK .015 0,38
NG-3189RK .189 4,80 .020 0,51 .150 3,81 .115 2,92
NG-3189LK .025 0,64
105
Top Notch Grooving Inserts ®
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm mm inch mm
±.001 ±.005
NG NG-2031R .031 0,79 .002 0,05 .050 1,27 — —
NG-2031L .005 0,13
NG-2041R .041 1,04 .002 0,05 .050 1,27 — —
NG-2041L .005 0,13
NG-2047R .047 1,19 .002 0,05 .050 1,27 — —
NG-2047L .005 0,13
NG-2058R .058 1,47 .005 0,13 .050 1,27 — —
NG-2058L .010 0,25
NG-2062R .062 1,57 .005 0,13 .110 2,79 — —
NG-2062L .010 0,25
NG-2094R .094 2,39 .005 0,13 .110 2,79 — —
NG-2094L .010 0,25
NG-2125R .125 3,18 .005 0,13 .110 2,79 — —
NG-2125L .010 0,25
NG-3047R .047 1,19 .005 0,13 .075 1,91 — —
NG-3047L .010 0,25
NG-3062R .062 1,57 .005 0,13 .094 2,39 — —
NG-3062L .010 0,25
NG-3072R .072 1,83 .005 0,13 .094 2,39 — —
NG-3072L .010 0,25
NG-3078R .078 1,98 .005 0,13 .094 2,39 — —
NG-3078L .010 0,25
NG-3088R .088 2,24 .005 0,13 .094 2,39 — —
NG-3088L .010 0,25
NG-3094R .094 2,39 .005 0,13 .150 3,81 — —
NG-3094L .010 0,25
NG-3097R .097 2,46 .010 0,13 .150 3,81 — —
NG-3097L .015 0,25
NG-3105R .105 2,67 .005 0,13 .150 3,81 — —
NG-3105L .010 0,25
NG-3110R .110 2,79 .010 0,25 .150 3,81 — —
NG-3110L .015 0,38
NG-3122R .122 3,10 .005 0,13 .150 3,81 — —
NG-3122L .010 0,25
NG-3125R .125 3,18 .005 0,13 .150 3,81 — —
NG-3125L .010 0,25
NG-3142R .142 3,61 .010 0,25 .150 3,81 — —
NG-3142L .015 0,38
NG-3156R .156 3,96 .005 0,13 .150 3,81 — —
NG-3156L .010 0,25
NG-3178R .178 4,52 .005 0,13 .150 3,81 — —
NG-3178L .010 0,25
NG-3185R .185 4,70 .020 0,51 .150 3,81 — —
NG-3185L .025 0,64
NG-3189R .189 4,80 .020 0,51 .150 3,81 — —
NG-3189L .025 0,64
106
Top Notch Grooving Inserts
insert catalog number dimensions grades
rε
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm mm inch mm
±.001 ±.005
NGD-K NGD-3062RK .062 1,57 .005 0,13 .125 3,18 .040 1,02
NGD-3062LK .010 0,25
NGD-3094RK* .094 2,39 .005 0,13 .250 6,35 .040 1,02
NGD-3094LK* .010 0,25
NGD-3125RK* .125 3,18 .005 0,13 .250 6,35 .040 1,02
NGD-3125LK* .010 0,25
NGD-3189RK* .189 4,80 .020 0,51 .250 6,35 .115 2,92
NGD-3189LK* .025 0,64
*these inserts
have one cutting edge
*these inserts
have one cutting edge
NR-K NR-3031RK
NR-3031LK .062 1,57 .031 0,79 .094 2,39 .078 1,98
NR-3047RK
NR-3047LK .094 2,39 .047 1,19 .150 3,81 .100 2,54
NR-3062RK
NR-3062LK .125 3,18 .062 1,57 .150 3,81 .100 2,54
NR-3078RK
NR-3078LK .156 3,96 .078 1,98 .150 3,81 .100 2,54
NR NR-2031R
NR-2031L .062 1,57 .031 0,79 .110 2,79 — —
NR-2047R
NR-2047L .094 2,39 .047 1,19 .110 2,79 — —
NR-2062R
NR-2062L .125 3,18 .062 1,57 .110 2,79 — —
NR-3031R
NR-3031L .062 1,57 .031 0,79 .094 2,39 — —
NR-3047R
NR-3047L .094 2,39 .047 1,19 .150 3,81 — —
NR-3062R
NR-3062L .125 3,18 .062 1,57 .150 3,81 — —
NR-3078R
NR-3078L .156 3,96 .078 1,98 .150 3,81 — —
NR-3094R
NR-3094L .188 4,78 .094 2,39 .150 3,81 — —
107
Top Notch Grooving Inserts ®
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm mm inch mm
±.001 ±.005
NRP NRP-3031R
NRP-3031L .062 1,57 .031 0,79 .094 2,39 — —
NRP-3047R
NRP-3047L .094 2,39 .047 1,19 .150 3,81 — —
NRP-3062R
NRP-3062L .125 3,18 .062 1,57 .150 3,81 — —
NRP-3078R
NRP-3078L .156 3,96 .078 1,98 .150 3,81 — —
NRP-3094R
NRP-3094L .188 4,78 .094 2,39 .150 3,81 — —
NRD NRD-3031R
NRD-3031L .062 1,57 .031 0,79 .125 3,18 — —
NRD-3062R*
NRD-3062L* .125 3,17 .062 1,57 .250 6,35 — —
*these inserts
have one cutting edge
NF-K NF-3125RK .125 3,17 .005 0,13 .150 3,81 .040 1,02
NF-3125LK .010 0,25
NF-3156RK .156 3,96 .005 0,13 .150 3,81 .115 2,92
NF-3156LK .010 0,25
108
Top Notch Grooving Inserts
insert catalog number dimensions grades
KC5010
KC5025
KC5410
w rε e e1
KD100
KT315
right hand left hand
K313
inch inch
K68
mm inch mm ±.005 mm inch mm
±.001
NFD-K NFD-3125RK* .125 3,17 .005 0,13 .250 6,35 .040 1,02
NFD-3125LK* .010 0,25
*these inserts
have one cutting edge
NFD-KI NFD-3125RKI* .125 3,17 .005 0,13 .250 6,35 .040 1,02
NFD-3125LKI* .010 0,25
NFD-3189RKI* .189 4,80 .020 0,51 .250 6,35 .115 2,92
NFD-3189LKI* .025 0,64
w
*these inserts inch
have one cutting edge ±.005 mm
NP-K NP-2002RK — .140 3,55 .002 0,05 .110 2,79 .108 2,74
.005 0,13
.012 0,31
NP-2012RK — .140 3,55
.015 0,38
.110 2,79 .108 2,74
.002 0,05
NP-3002RK — .180 4,57
.005 0,13
.200 5,08 .151 3,83
.012 0,31
NP-3012RK — .180 4,57
.015 0,38
.200 5,08 .151 3,83
*these inserts
have one cutting edge
... High-performance choice under optimal conditions steel
... First choice for general machining conditions stainless steel
... Preferred choice for unfavorable conditions non-ferrous
high-temp alloys
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
109
Top Notch Grooving ®
KC5010
KC5025
KC5410
w e e1
KD100
KT315
right hand left hand
K313
K420
inch mm inch mm
K68
inch mm inch mm
±.001 ±.005
NU NU-3094R
NU-3094L .094 2,39 .020 0,51 .125 3,18 — —
NU-3125R
NU-3125L .125 3,18 .047 1,19 .188 4,78 — —
NU-3156R
NU-3156L .156 3,96 .047 1,19 .188 4,78 — —
d1
90° included angle on end form
inch mm
NV NV-3RJ
.087 2,21 .0125 0,30 .125 3,18 — —
NV-3LJ
w
inch mm
±.001
NB NB-2R .150 3,81 — — — — — —
NB-2L
NB-3R .195 4,95 — — — — — —
NB-3L
STEP 1:
Choose your system based on the groove depth required.
Top Notch A3
A3 System Capabilities
Ratio: For grooving operations
where the depth is 1.5 times
the groove width or greater.
STEP 2:
Choose your toolholder based on the application. Please note that holders
are available in conventional square shank as well as quick-change versions.
Take special note of the seat size based on the groove width.
■ For OD grooving with integral square shank holders, see pages 174-175.
STEP 3:
Select the proper chipbreaker and feed rate for the application and
material to be machined. See table below. Note for future reference.
A3 Chipbreakers and Feed Rates – in/rev (mm/rev)
workpiece
material
application steel stainless high-temp
steel non-ferrous alloys
example
DM DF DF DF
.002 - .010 .002 - .006 .002 - .010 .002 - .005
(0,05 - 0,25) (0,05 - 0,15) (0,05 - 0,25) (0,05 - 0,13)
DF
.002 - .007
(0,05 - 0,18)
deep OD grooving
DF DF DF DF
.002 - .006 .002 - .005 .002 - .007 .0015 - .004
(0,05 - 0,15) (0,05 - 0,13) (0,05 - 0,18) (0,04 - 0,10)
DR DF DF DF
.004 - .015 .002 - .010 .002 - .010 .002 - .010
(0,10 - 0,40) (0,05 - 0,25) (0,05 - 0,25) (0,05 - 0,25)
DF
.002 - .010
(0,05 - 0,25)
profiling For profiling, the maximum recommended depth of cut is one-third the insert’s width.
NOTE: Use minimum feed rates for narrower grooves and heavier feed rates for wider grooves. Increase feed rate
as operation allows. See Technical Section for additional application information.
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
112
STEP 4:
Choose the grade and speed based on the
material and cutting conditions to be encountered.
machining condition
stainless high-temp
steel steel non-ferrous alloys
STEP 5:
Select insert and holder from Lathe Tooling Catalog 1010 pages which
meet the above criteria. Note the insert seat size and cutting width. Match the seat
size and cutting width to your toolholder selection.
For example: Insert: A3G250I08P1DF
Grade: KT315
Width: .250
Seat Size: 8
Congratulations!
You have successfully maximized productivity by selecting the best A3 insert
geometry, grade, and cutting specifications for your application based on the
workpiece material.
113
A3 Deep Grooving Insert Identification System ®
7.
5. Corner Radii
Insert Size inch metric
3.
0 01
1. Groove 03
04 05 = .008 02
Type of Program Width (*)4S 1 = .016 04
05 2 = .032 08
expressed in .001 06 3 = .047 12
A3 — deep grooving 4 = .062 16
program inch or 1/100 mm 08
0000 for V shape 10 full radius = 00
A3 G 0400 I 04 P 02 DF
2. 4. 6. 8.
Insert Style Units Definition of Chip Former
I = inch
the Insert
G — square DF = Deep Finishing
M= metric DM = Deep Medium
R — full radius P = precision (ground)
V — V-shape 35° U = utility (molded) DR = Deep Roughing
(*)4S designates a size “4 small” insert for face grooving small diameters.
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of
OD toolholders, ID boring bars, and inserts.
The A3 Deep Grooving System lends itself to Easy to order! Delivery is quick, too!
custom grooving applications. Six standard insert
seat sizes can be used to cut grooves from To take advantage of A3’s flexibility, just build All uncoated inserts are shipped within five
.093 to .394, in .001 increments. Either round or your own part number from the table below and working days and coated inserts within ten
square grooves can be generated with various call your local Kennametal service center at working days.
corner radii. For additional information on how to 1-800-446-7738 for a quick quote.
order custom grooving inserts, refer to Catalog
1010, pages 260-261 or call 1-800-446-7738.
114
A3 Deep Grooving Inserts
Metric Inserts grades
w rε
KC5025
KC5010
KT315
Precision Ground insert catalog number seat size
KMF
inch ±.001 mm ±0,025 inch mm
Inch Inserts
Precision Ground
A3-DF A3G093I03P05DF 3 .093 2,36 .008 0,2
A3G125I03P05DF 3 .125 3,18 .008 0,2
A3G125I04P05DF 4 .125 3,18 .008 0,2
115
A3 Deep Grooving Inserts ®
Precision Molded
w rε grades
KC5025
KC5010
insert catalog number
KT315
seat size
inch +.006 mm +0,15
KMF
inch mm
-0 -0
A3-DM A3G0305M03U02DM 3 .120 3,05 .008 0,2
A3G0405M04U02DM 4 .159 4,05 .008 0,2
35° Profiling
ls rε
inch mm inch mm
116
Maximize Productivity
with High-Performance
A2 Cutoff Tooling
Innovative A2 Insert Design
• V-prisms on both top and bottom enable higher
clamping force to prevent insert movement,
even when cutting at high feed rates.
• The cutting edge has a molded-in chipbreaker
ramp to direct chips away from the blade,
extending blade life.
• Positive rake cutting action combined with
Kennametal’s high-performance PVD coatings
result in superior tool life and chip control.
117
KENNA PERFECT
Maximize Cutoff System
Productivity with
High
5 Performance
Easy Steps A2
to Maximize Cutoff Cutof
Productivity
7
(175) ◆ To maximize rigidity, select the largest possible
blade height or an integral shank holder.
6
(150) ◆ Diameters shown are for cutoff to center.
Maximum cutoff depth to a through-hole is
5 one-half the diameter.
(125)
◆ To determine capability for cutoff to a
4
(100) through-hole on integral shank or reinforced
blades, please refer to listing for that tool in
3 this catalog.
(75)
2
(50)
blade height
1 19 mm
(25)
26 mm
32 mm
0
.063 .087 .118 .157 .197 .236 .315 52 mm
(1,6) (2,2) (3,0) (4,0) (5,0) (6,0) (8,0)
integral
insert width - in. (mm) shank
toolholders
toolholder type
blade: blade: integral shank toolholder:
(self-clamping) (self-clamping, reinforced version) (screw-clamping)
insert type
• for cutting off solid workpieces • for cutting off solid workpieces • for thin-walled workpieces
recommended • center stub will form on cutoff part with reduced formation of center stub • for cutting off small diameter
application • eliminates lateral deflection • for cutoff to a through-hole with workpieces with minimal burr
• best for deep cutoff depths reduced burr or center stub
tool life best tool life better tool life good tool life
• cutoff insert with precision ground • cutoff insert with precision molded • cutoff insert with precision molded
cutting edge for low feeds cutting edge for medium feeds cutting edge for higher feed rates
• curved cutting edge • stabilized straight cutting edge • curved cutting edge
N-CF
.002 – .006
(0,05 – 0,15)
R/L-CR R/L-CF R/L-CF R/L-CF
.002 – .005 .002 – .003 .002 – .004 .002 – .003
(0,05 – 0,12) (0,04 – 0,08) (0,04 – 0,10) (0,04 – 0,08)
R/L-CF
.002 – .003
(0,04 – 0,08)
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
119
A2 Cutoff Insert Identification System ®
3.
Hand of 5.
1. Insert Chipbreaker
Insert Type N = neutral -CF (Cutoff Fine)
R = right hand -CM (Cutoff Medium)
A2 — cutoff L = left hand -CR (Cutoff Rough)
A2 040 N 00 CF 02
2. 4. 6.
Cutting Width Approach Angle Corner Radius
of Main Cutting mm inch
(in 1/10 mm)
Edge 00 0,03 .001
01 0,1 .004
00 = neutral 02 0,2 .008
06 = 6° 03 0,3 .010
10 = 10° 04 0,4 .016
15 = 15°
16 = 16°
With more than 80 insert line items in three grades and three chipbreaker styles,
Kennametal offers a complete line of inserts designed to productively handle most
any cutoff application.
120
A2-CF — Cutoff Fine Inserts
w* rε grades
KC5025
catalog number seat size a°
KT315
KMF
inch mm inch mm
*tolerance on
“w” dimension
width tolerance
inch mm inch mm
+0 +0
.063 1,6 -.004 -0,1
.087 2,2
+.006 +0,15
.118 3,0
.157 4,0
-0 -0 NOTE: A2 inserts are designed to fit both
A2 and A3 tooling (A2 inserts are not
.197 5,0
+.010 +0,25
recommended for face grooving).
.236 6,0
-0 -0
.315 8,0
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts. 121
A2-CM — Cutoff Medium Inserts ®
w* rε grades
KC5025
catalog number seat size a°
KT315
KMF
inch mm inch mm
*tolerance on
“w” dimension
width tolerance
inch mm inch mm
+0 +0
.063 1,6 -.004 -0,1
.087 2,2
+.006 +0,15
.118 3,0
.157 4,0
-0 -0 NOTE: A2 inserts are designed to fit both
A2 and A3 tooling (A2 inserts are not
.197 5,0
+.010 +0,25
recommended for face grooving).
.236 6,0
-0 -0
.315 8,0
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
122
A2-CR — Cutoff Rough Inserts
w* rε grades
KC5025
catalog number seat size a°
KT315
KMF
inch mm inch mm
*tolerance on
“w” dimension
width tolerance
inch mm inch mm
+0 +0
.063 1,6 -.004 -0,1
.087 2,2
+.006 +0,15
.118 3,0
.157 4,0
-0 -0 NOTE: A2 inserts are designed to fit both
A2 and A3 tooling (A2 inserts are not
.197 5,0
+.010 +0,25
recommended for face grooving).
.236 6,0
-0 -0
.315 8,0
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
123
Backturning,
Cutoff, Grooving,
and Threading
Kennametal is your single source for
Swiss tooling optimization!
124
Backturning, Cutoff,
Grooving, and Threading
page
Inserts 128
Need technical
assistance?
Call our
Tech Hotline!
125
KENNA PERFECT Grade Selection ®
NOTE: These grades are specifically offered for Swiss-Style backturning, cutoff, grooving, and threading applications.
For other grades and application guidelines, please see the Technical Data Section of this catalog.
Tooling Applications
126
Insert Identification System
7.
5. Width or
Insert Thickness Nose Radius
width on grooving
size inserts and nose
symbol (mm)
radius on backturning
03 3,18 inserts in 0,01 of mm.
16 03 R 033
4. 6.
Insert Size Hand of
1. Insert
Type of Insert 3. insert size d
Insert Usage (mm)
0,6
(mm)
6,35 R = right
T = on-edge triangle 13 7,94 L = left
V = 35° rhombic G = plunge grooving 16 9,525
S = laydown P = profiling/backturning 22 12,70
backturning insert T = threading
METRIC INSERTS
T 20 G – INCH INSERTS
7.
2. Width or
Effective 5.
Insert Thickness Nose Radius
Cutting Angle
width on grooving
size inserts and nose radius
02 = 2° symbol inch
10 = 10° on backturning inserts
20 = 20° 2 .125 in .001 of an inch.
30 = 30°
3 2 R 013
4. 6.
Insert Size Hand of
insert size d
Insert
inch inch
2 .25 R = right
2.5 .3125 L = left
3 .375
4 .500
127
Backturning, Cutoff, Threading, and Grooving ®
Laydown Backturning
grades
catalog number maximum
KC5035
KT5135
d rε s d1
right hand left hand depth of cut
S10P metric
S10P 06 03 R005 6,350 0,05 3,18 3,00 3,00
S10P 06 03 L005 6,350 0,05 3,18 3,00 3,00
S10P 06 03 R010 6,350 0,10 3,18 3,00 3,00
S10P 06 03 L010 6,350 0,10 3,18 3,00 3,00
S10P 06 03 R015 6,350 0,15 3,18 3,00 3,00
S10P 06 03 L015 6,350 0,15 3,18 3,00 3,00
inch
S10P-22R002 .250 .002 .125 .118 .118
S10P-22L002 .250 .002 .125 .118 .118
S10P-22R004 .250 .004 .125 .118 .118
S10P-22L004 .250 .004 .125 .118 .118
S10P-22R006 .250 .006 .125 .118 .118
S10P-22L006 .250 .006 .125 .118 .118
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions cast iron
– stocked
▫ – limited stock ... Preferred choice for unfavorable conditions non-ferrous
high-temp alloys
On-Edge Backturning
grades
catalog number
maximum
KC5035
KT5135
d rε s d1
right hand left hand depth of cut
T02P metric
T02P 16 03 R000 9,525 0,03 3,18 4,40 2,50
T02P 16 03 L000 9,525 0,03 3,18 4,40 2,50
T02P 16 03 R005 9,525 0,05 3,18 4,40 2,50
T02P 16 03 L005 9,525 0,05 3,18 4,40 2,50
T02P 16 03 R010 9,525 0,10 3,18 4,40 2,50
T02P 16 03 L010 9,525 0,10 3,18 4,40 2,50
T02P 16 03 R015 9,525 0,15 3,18 4,40 2,50
T02P 16 03 L015 9,525 0,15 3,18 4,40 2,50
inch
T02P-32R001 .375 .001 .125 .173 .098
T02P-32L001 .375 .001 .125 .173 .098
T02P-32R002 .375 .002 .125 .173 .098
T02P-32L002 .375 .002 .125 .173 .098
T02P-32R004 .375 .004 .125 .173 .098
T02P-32L004 .375 .004 .125 .173 .098
T02P-32R006 .375 .006 .125 .173 .098
T02P-32L006 .375 .006 .125 .173 .098
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions cast iron
– stocked
▫ – limited stock ... Preferred choice for unfavorable conditions non-ferrous
high-temp alloys
128
Backturning, Cutoff, Threading, and Grooving
On-Edge Threading
catalog number
KC5035
KT5135
d rε s d1
right hand left hand
T30T metric
T30T 16 03 005R 9,525 0,05 3,18 4,4
T30T 16 03 005L 9,525 0,05 3,18 4,4
T30T 16 03 010R 9,525 0,10 3,18 4,4
T30T 16 03 010L 9,525 0,05 3,18 4,4
inch
T30T-32002R .375 .002 .125 .173
T30T-32002L .375 .002 .125 .173
T30T-32004R .375 .004 .125 .173
T30T-32004L .375 .004 .125 .173
Thread per inch range steel
(tpi) is 25 to 50. ... High-performance choice under optimal conditions stainless steel
Thread pitch range is ... First choice for general machining conditions
0,5 mm to 1,0 mm. cast iron
... Preferred choice for unfavorable conditions non-ferrous
high-temp alloys
– stocked
▫ – limited stock
On-Edge Cutoff
catalog number
KC5035
KT5135
d w rε e s d1 max doc
right hand left hand
V10G metric
V10G 13 03 R100 7,94 1,00 * 6,00 3,18 3,40 5,50
V10G 13 03 L100 7,94 1,00 * 6,00 3,18 3,40 5,50
V10G 13 03 R150 7,94 1,50 * 6,00 3,18 3,40 5,50
V10G 13 03 L150 7,94 1,50 * 6,00 3,18 3,40 5,50
inch
V10G-2.52R039 .313 .039 * .236 .125 .134 .217
V10G-2.52L039 .313 .039 * .236 .125 .134 .217
V10G-2.52R059 .313 .059 * .236 .125 .134 .217
V10G-2.52L059 .313 .059 * .236 .125 .134 .217
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions cast iron
... Preferred choice for unfavorable conditions non-ferrous
– stocked
▫ – limited stock high-temp alloys
*Sharp corner
129
Backturning, Cutoff, Threading, and Grooving ®
dimensions grades
catalog number
KC5035
KT5135
w
d +0,05 mm rε e s d1 max. doc
right hand left hand
(+.002 inch)
T20G metric
T20G 16 03 R033 9,525 0,33 0,03 0,80 3,18 4,40 0,70
T20G 16 03 L033 9,525 0,33 0,03 0,80 3,18 4,40 0,70
T20G 16 03 R050 9,525 0,50 0,03 1,20 3,18 4,40 1,10
T20G 16 03 L050 9,525 0,50 0,03 1,20 3,18 4,40 1,10
T20G 16 03 R075 9,525 0,75 0,03 2,00 3,18 4,40 1,90
T20G 16 03 L075 9,525 0,75 0,03 2,00 3,18 4,40 1,90
T20G 16 03 R095 9,525 0,95 0,03 2,00 3,18 4,40 1,90
T20G 16 03 L095 9,525 0,95 0,03 2,00 3,18 4,40 1,90
T20G 16 03 R100 9,525 1,00 0,05 2,20 3,18 4,40 2,1
T20G 16 03 L100 9,525 1,00 0,05 2,20 3,18 4,40 2,1
T20G 16 03 R125 9,525 1,25 0,05 2,20 3,18 4,40 2,1
T20G 16 03 L125 9,525 1,25 0,05 2,20 3,18 4,40 2,1
T20G 16 03 R145 9,525 1,45 0,05 2,20 3,18 4,40 2,1
T20G 16 03 L145 9,525 1,45 0,05 2,20 3,18 4,40 2,1
T20G 16 03 R150 9,525 1,50 0,05 2,20 3,18 4,40 2,1
T20G 16 03 L150 9,525 1,50 0,05 2,20 3,18 4,40 2,1
T20G 16 03 R175 9,525 1,75 0,05 2,20 3,18 4,40 2,1
T20G 16 03 L175 9,525 1,75 0,05 2,20 3,18 4,40 2,1
T20G 16 03 R200 9,525 2,00 0,05 2,70 3,18 4,40 2,6
T20G 16 03 L200 9,525 2,00 0,05 2,70 3,18 4,40 2,6
T20G 16 03 R250 9,525 2,50 0,05 2,70 3,18 4,40 2,6
T20G 16 03 L250 9,525 2,50 0,05 2,70 3,18 4,40 2,6
inch
T20G-32R013 .375 .013 .001 .031 .125 .173 .028
T20G-32L013 .375 .013 .001 .031 .125 .173 .028
T20G-32R020 .375 .020 .001 .047 .125 .173 .043
T20G-32L020 .375 .020 .001 .047 .125 .173 .043
T20G-32R030 .375 .030 .001 .079 .125 .173 .075
T20G-32L030 .375 .030 .001 .079 .125 .173 .075
T20G-32R037 .375 .037 .001 .079 .125 .173 .075
T20G-32L037 .375 .037 .001 .079 .125 .173 .075
T20G-32R039 .375 .039 .002 .087 .125 .173 .083
T20G-32L039 .375 .039 .002 .087 .125 .173 .083
T20G-32R049 .375 .049 .002 .087 .125 .173 .083
T20G-32L049 .375 .049 .002 .087 .125 .173 .083
T20G-32R057 .375 .057 .002 .087 .125 .173 .083
T20G-32L057 .375 .057 .002 .087 .125 .173 .083
T20G-32R059 .375 .059 .002 .087 .125 .173 .083
T20G-32L059 .375 .059 .002 .087 .125 .173 .083
T20G-32R069 .375 .069 .002 .087 .125 .173 .083
T20G-32L069 .375 .069 .002 .087 .125 .173 .083
T20G-32R079 .375 .079 .002 .106 .125 .173 .102
T20G-32L079 .375 .079 .002 .106 .125 .173 .102
T20G-32R098 .375 .098 .002 .106 .125 .173 .102
T20G-32L098 .375 .098 .002 .106 .125 .173 .102
steel
... High-performance choice under optimal conditions stainless steel
... First choice for general machining conditions cast iron
... Preferred choice for unfavorable conditions non-ferrous
high-temp alloys
– stocked
▫ – limited stock
130
Micro Boring Bar Inserts
page
Boring Inserts
A-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-133
B-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
131
Boring Inserts for Micro Boring Bars ®
A-Series
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I2 f
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I2 f t a
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I1 f t R
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
132
Boring Inserts for Micro Boring Bars
A-Series
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I1 f t tpi
B-Series
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I1 f
dimensions grades
KB5625
KD100
catalog number
KC610
Dmin I I1 f t
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
133
Indexable Inserts ®
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 l s R
dimensions grades
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 l s R
dimensions grades
catalog number
KC5010
KC5025
KB5625
KD100
KT315
*NOTE: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
134
Indexable Inserts
Grooving Screw-On
dimensions grades
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 s t a
dimensions grades
catalog number
KC5010
KC5025
KB5625
KD100
KT315
right hand left hand d1 s t a
Threading Screw-On
dimensions grades
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 s t R
dimensions grades
catalog number
KC5010
KC5025
KB5625
KD100
KT315
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
135
Indexable Inserts ®
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 I s R
Triangle Screw-On
dimensions grades
catalog number
KC5010
KC5025
KB5625
KD100
KT315
right hand left hand d1 I s R
Note: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.
dimensions grades
catalog number
KC5010
KC5025
KB5625
KD100
right hand left hand d1 I s R KT315
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
136
Indexable Inserts
Triangle Screw-On
dimensions grades
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 I s R
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
137
Indexable Inserts ®
Triangle Screw-On
dimensions grades
KC5010
KC5025
KB5625
KD100
catalog number
KT315
d1 I s R
Trigon Screw-On
dimensions grades
KC5010
KC5025
KB5625
catalog number
KD100
KT315
d1 I s R
– stocked
▫ – limited stock
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
138
Table of Contents
page
Clamping Units . . . . . . . . . . . . . . 141
TM
139
Features
1 KM Micro is a compact interchangeable
cutting unit system.
ports.
2 The combination of face and taper contact
Benefits provides an accurate and repeatable insert
tip location in both cutting axes.
NCM/RCM/LCM
metric
KM12-NCM-1212-100 12 neutral 100,0 8,00 12,00 12,00 KM12-NSPKG T25
KM16-NCM-1616-95 16 neutral 95,00 10,00 16,00 16,00 KM16-NSPKG T27
KM16-NCM-1616-105 16 neutral 105,00 10,00 16,00 16,00 KM16-NSPKG T27
inch
KM12-RCM-08-400 12 right hand 4.000 .315 .500 .500 KM12-NSPKG T25
KM12-LCM-08-400 12 left hand 4.000 .315 .500 .500 KM12-NSPKG T25
KM16-NCM-10-382 16 neutral 3.819 .394 .625 .625 KM16-NSPKG T27
KM16-NCM-10-421 16 neutral 4.213 .394 .625 .625 KM16-NSPKG T27
NCM SS
KM size
catalog number d1 d2 l1 l2 spare parts
dKM
metric
KM12-NCM-SS19-14 12 19,00 25,00 100,00 14,00 KM12-NRPKG T25
KM16-NCM-SS20-16 16 20,00 26,00 100,00 16,00 KM16-NRPKG T27
KM16-NCM-SS22-16 16 22,00 28,00 100,00 16,00 KM16-NRPKG T27
inch
KM12-NCM-SS12-055 12 .750 .984 3.937 .551 KM12-NRPKG T25
KM16-NCM-SS12-063 16 .750 .984 3.937 .630 KM16-NRPKG T27
KM16-NCM-SS16-063 16 1.000 1.260 3.937 .630 KM16-NRPKG T27
Wrench
KM size
catalog number dKM Torx size torque setting
141
KM Micro Clamping Units ®
KM Micro Flanges
spare parts
KM size coolant spare parts
catalog number d1 l1 l2 h1 h2 p1 mounting bolts
dKM package
(2 req’d)
KM16-NCM-SF2726* 16 No .551 .630 .866 1.063 .531 1.024 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27
KM16-NCM-SEF2726* 16 No .551 1.024 1.260 1.063 .531 1.024 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27
spare parts
KM size coolant spare parts
catalog number d1 l1 l2 h1 h2 p1 mounting bolts
dKM package
(2 req’d)
KM16-NCM-SF2728* 16 Yes .551 .630 .866 1.063 .531 1.102 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27
KM16-NCM-SEF2728* 16 Yes .551 1.024 1.260 1.063 .531 1.102 MS-337 (M6 x 20 SHCS) KM16-NRPKG T27
*Non-stocked standards
142
KM Micro Clamping Units
KM Micro Flanges
spare parts
KM size coolant d1 l1 l2 h1 h2 p1 spare parts
catalog number dKM mounting bolts
package
(4 req’d)
KM12-NCM-SF1522 12 No .394 .551 .709 .620 .310 .866 125.316 (M3 x 16) KM12-NRPKG T25
KM16-NCM-SF1928 16 No .551 .630 .866 .748 .374 1.102 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27
KM16-NCM-SEF1928 16 No .551 1.024 1.260 .748 .374 1.102 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27
spare parts
KM size coolant spare parts
catalog number d1 l1 l2 h1 h2 p1 mounting bolts
dKM package
(4 req’d)
KM16-NCM-SF1932* 16 Yes .551 .630 .866 .748 .374 1.260 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27
KM16-NCM-SEF1932* 16 Yes .551 1.024 1.260 .748 .374 1.260 MS-319 (M4 x 20 SHCS) KM16-NRPKG T27
*Non-stocked standards
143
KM Micro Cutting Units ®
MCL 95°
catalog
catalog number
number KM size
l1 f
right hand left hand dKM
KM16-MCLNR09 KM16-MCLNL09 16 1.181 .394 CNMG 322 ICSN-332 KLM-34L-T9 CKM-7LP STCM-9-T9 T9
KM16-MCLNR12 KM16-MCLNL12 16 1.181 .394 CNMG 432 ICSN-432 KLM-46L-T15 CKM-20LP STCM-11-T15 T15
MDJ 93°
catalog
catalog number
number KM size l1 f
right hand left hand dKM
KM16-MDJNR11 KM16-MDJNL11 16 1.181 .394 DNMG 332 IDSN-322 KLM-34L-T9 CKM-7LP STCM-9-T9 T9
144
KM Micro Cutting Units
Kenloc Pin/Clamp Combination
MSD 45°
MTG 90°
catalog
catalog number
number KM size
l1 f
right hand left hand dKM
KM16-MTGNR16 KM16-MTGNL16 16 1.181 .394 TNMG 332 ITSN-322 KLM-34L-T9 CKM-7LP STCM-9-T9 T9
145
KM Micro Cutting Units ®
Screw-On Inserts
SCG 90°
SCL 95°
146
KM Micro Cutting Units
Screw-On Inserts
SCM 50°
KM size
catalog number l1 f
dKM
SDG 90°
147
KM Micro Cutting Units ®
Screw-On Inserts
SDJ 93°
KM size f
catalog number dKM l1
148
KM Micro Cutting Units
Screw-On Inserts
STG 90°
STJ 93°
149
KM Micro Cutting Units ®
Screw-On Inserts
SVG 90°
SVJ 93°
150
KM Micro Cutting Units
Screw-On Inserts
SWL 95°
See page 58
for inserts.
See page 63
for inserts.
151
KM Micro Cutting Units ®
Backturning
SSP
STP
152
KM Micro Cutting Units
On-Edge Threading and Grooving
STG Grooving
STT Threading
153
KM Micro Cutting Units ®
NS
154
KM Micro Cutting Units
Laydown Threading
LSS
A3 Deep Grooving
A3S
KM12-A3SR311 KM12-A3SL311 12 1.181 .472 .315 .118 .236 A3G0300M03 MS-1944 T25
KM16-A3SR311 KM16-A3SL311 16 1.181 .472 .394 .118 .315 A3G0300M03 MS-1944 T25
KM16-A3SR411 KM16-A3SL411 16 1.181 .472 .394 .157 .315 A3G0400M04 MS-1944 T25
155
KM Micro Cutting Units ®
Integral Cutoff
SVG
A2 Integral Cutoff
A2S
KM12-A2SR211 KM12-A2SL211 12 1.181 .472 .315 .087 .240 A2022... MS-1944 T25
KM16-A2SR211 KM16-A2SL211 16 1.181 .472 .394 .087 .319 A2022... MS-1944 T25
KM16-A2SR216 KM16-A2SL216 16 1.181 .669 .394 .087 .319 A2022... MS-1944 T25
156
KM Micro Cutting Units
A2 Modular Cutoff
BS
A2 Blade – Cutoff
A2
catalog number e w
157
KM Micro Systems Tooling ®
Timing Heads
TIM
Collet Chucks
ER
158
KM Micro Systems Tooling
Presetter CV Shanks – Offset (Static Tools)
ECTRA
KM size
catalog number taper l1 d1 spare parts
dKM
159
KM Micro Systems Tooling ®
Blank
BN
KM size
catalog number dKM l1 d1
Plug
P
KM size
catalog number dKM l1 d1
160
Spares and Accessories
torque screw
KM12-NSPKG
KM16-NSPKG
nut pin
torque screw
nut
KM12-NRPKG
KM16-NRPKG
Lubrication:
Using a Torx wrench, back out the screw against the stops and generously apply grease to the threads and conical surfaces of
the components. Lightly apply a coating of grease to the taper surface. Gleitmo 805 is the recommended grease to use.
161
Spares and Accessories ®
162
OD Tooling
page
Toolholder Identification System
for OD Toolholders . . . . . . . . . . . . . . . 164
Toolholders
Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Top Notch Profiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Top Notch Threading, Grooving, and Backturning. . . . . . . . . 172
LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
A3 Deep Grooving and Profiling Toolholders . . . . . . . . . . . . . . . 174
A2 Cutoff Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Backturning, Cutoff, Grooving, and Threading . . . . . . . . . . . . . . 177
Toolholders
Need technical
assistance?
Call our
Tech Hotline!
163
Toolholder Selection System ®
C D K
T V W
2.
Insert Shape
1. 5.
Insert Holding Method Hand of Tool
3.
S C A C R ▫
Tool Style or Lead Angle
A B C D E 4.
Insert Clearance Angle
C N
F G H J K
P E
L M P Q R
B D
T U V Y
F
6.
Additional Information
C — deep pocket for ceramic insert
*Kennametal standard only. S — single pocket locating wall
F — straight shank, no offset
164
Toolholder Identification System
Identification System for Backturning, Cutoff, Grooving, and Threading Toolholders
8.
Insert Size
number of
1/8ths of IC
– 10 3 B
7. 9.
Shank Qualified Surface
Dimensions and Length
B = qualified back and end, 4.5" long
D = qualified back and end, 6" long
Z = qualified back and end, 3.25" long
INCH Lock Pin toolholders are qualified over nose radius of gage insert
in accordance with ANSI standards.
– METRIC
*Two-inch square shanks are qualified to ±.005.
Catalog numbers for utility toolholders are not overprinted with color.
Tolerances are ±.010 on “f” dimension and ±.125 on “l1”.
8.
Shank Width 10.
(mm) Insert Size
(mm)
cutting edge
length in mm
– 16 16 F 09 Q
7. 9. 11.
Shank Height Tool Length Tool Qualifications
(mm) F = 80 mm (mm)
H = 100 mm
K = 125 mm Q = qualified back and end
M = 150 mm F = qualified front and end
B = qualified front, back,
and end
SCAC
SCLC-F
166
Screw-On Toolholders
SDAC
SDJC-F
167
Screw-On Toolholders ®
SDPC
STAC
168
Screw-On Toolholders
STJC-F
SVAB
169
Screw-On Toolholders ®
SVJB-F
SWLC-F
See page 58
for additional insert
geometry styles.
catalog number
right hand left hand
h b l1 l2 f
170
Top Notch Profiling Toolholders
NKL-F
See page 63
for additional insert
geometry styles. *NKLCRF/LF-0805D and NKLCR/LF-1212M11Q only.
catalog number
right hand left hand
h b l1 l2 f b3
AR
Reduce Downtime with KM ®
ODUL
KM M
QU
™
IC K-C
G
HANG
S
E
YSTEM
S Quick-Change Tooling
LIN
TOO
KM quick-change tooling is a round, centerline system designed
for use in both rotating and non-rotating machining applications.
tems
0030
Catalog
171
Top Notch Threading, Grooving, and Backturning ®
NAS
catalog number
right hand left hand *
h b l1 d l2 f** b3 f1 j
– stocked
▫ – limited stock
172
LT Threading Toolholders
LSA
173
A3 Deep Grooving and Profiling Toolholders ®
A3SM / A3SS
– stocked
▫ – limited stock
174
A3 Integral Shank Profiling Toolholders — Metric
A3DS
Round/Square Shaped Inserts
right-hand toolholder
shown — left-hand is
See pages 115-116 mirror image
for inserts.
A3PS / A3US
Toolholder for V-Shape Inserts with 93° and 117° 30' Approach Angles
– stocked
▫ – limited stock
175
Shank Toolholders for A2 Cutoff Inserts ®
A3SC
176
OD Tooling
Backturning, Threading,
Grooving, and Cutoff Toolholders
page
Toolholder Identification System . . . . . . . . . 178
Toolholders
177
Toolholder Identification System ®
6.
Shank Width 8.
(mm) Insert Size
(mm)
cutting edge
length
12 12 M 09 Q
5. 7. 9.
Shank Height Tool Length Tool Qualifications
(mm) F = 80 mm (mm)
H = 100 mm
K = 125 mm Q = qualified back and end
M = 150 mm F = qualified front and end
B = qualified front, back,
and end
3.
Tool Style
1. G = grooving
Screw-On Insert P = profiling or backturning
T = threading
Holding
METRIC
S T G R – INCH
2. 4.
Insert Shape Hand of Tool
S = square backturning
T = triangle
V = 35° diamond grooving R
6.
Insert Size
N number of
1/8ths of IC
08 3 D
5. 7.
Shank Qualified Surface
Dimensions and Length
B = qualified back and end, 4.5" long
D = qualified back and end, 6" long
Z = qualified back and end, 3.25" long
catalog number
right hand left hand
insert h b l1 f
– stocked
▫ – limited stock
179
On-Edge Backturning Toolholders ®
STP
catalog number
right hand left hand
insert h b l1 l2 f h3
– stocked
▫ – limited stock
180
On-Edge Threading Toolholders
STT
catalog number
right hand left hand
insert h b l1 l2 f h3
– stocked
▫ – limited stock
181
On-Edge Grooving Toolholders ®
STG
– stocked
▫ – limited stock
182
On-Edge Cutoff Toolholders
SVG
catalog number
right hand left hand insert h b l1 l2 f
– stocked
▫ – limited stock
183
Introducing...
AN ALL NEW
KENNAMETAL.COM!
Here are Some Features of the
ALL NEW Kennametal.com:
On-line Buying
Contract Ordering
carrier information!
Favorites List
Visit http://www.kennametal.com
today to register to take
advantage of our NEW
on-line features!
184
Boring Bars
page
LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
185
Kendex Mini Boring Bars ®
metric
S06D-CBFPR 03 BPGF0302..L.. 3,5 6 60 3,25 16 6 E-1031 FT-6
S06D-CBFPL 03 BPGF0302..R.. 3,5 6 60 3,25 16 6 E-1031 FT-6
S06D-CBFPR 05 BPGF0503..L.. 5,0 6 60 4,5 16 8 E-1014 FT-6
S06D-CBFPL 05 BPGF0503..R.. 5,0 6 60 4,5 16 8 E-1014 FT-6
S08F-CBFPR 05 BPGF0503..L.. 5,0 8 80 5,5 20 10 E-1014 FT-8
S08F-CBFPL 05 BPGF0503..R.. 5,0 8 80 5,5 20 10 E-1014 FT-8
S10H-CBFPR 05 BPGF0503..L.. 5,0 10 100 6,5 24 12 E-1014 FT-8
S10H-CBFPL 05 ▫ BPGF0503..R.. 5,0 10 100 6,5 24 12 E-1014 FT-8
inch
S04-KBFPR03 — BPGF 03 02 02L .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6
S04-KBFPR05 — BPGF 05 03 02L .20 .250 2.375 .177 1.75 .315 CE-1014 FT-8
S05-KBFPR05 — BPGF 05 03 02L .20 .312 3.125 .216 2.38 .394 CE-1014 FT-8
*Refer to insert page 64.
NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
S-CBL
S-KBL
catalog number
right hand left hand
l* dg7 l1 f l2 min. bore
metric
S06D-CBLPR 03 BPGF0302..L.. 3,5 6 60 3,25 16 6 E-1031 FT-6
S06D-CBLPL 03 BPGF0302..R.. 3,5 6 60 3,25 16 6 E-1031 FT-6
S06D-CBLPR 05 BPGF0503..L.. 5,0 6 60 4,5 16 8 E-1014 FT-8
S06D-CBLPL 05 BPGF0503..R.. 5,0 6 60 4,5 16 8 E-1014 FT-8
S08F-CBLPR 05 BPGF0503..L.. 5,0 8 80 5,5 20 10 E-1014 FT-8
S08F-CBLPL 05 BPGF0503..R.. 5,0 8 80 5,5 20 10 E-1014 FT-8
S10H-CBLPR 05 BPGF0503..L.. 5,0 10 100 6,5 24 12 E-1014 FT-8
S10H-CBLPL 05 BPGF0503..R.. 5,0 10 100 6,5 24 12 E-1014 FT-8
inch
S04-KBLPR03 BPGF 03 02 02L .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6
S04-KBLPL03 BPGF 03 02 02R .14 .250 2.375 .128 1.75 .250 CE-1031 FT-6
S04-KBLPR05 BPGF 05 03 02L .20 .250 2.375 .177 1.75 .315 CE-1014 FT-8
S04-KBLPL05 BPGF 05 03 02R .20 .250 2.375 .177 1.75 .315 CE-1014 FT-8
S05-KBLPR05 BPGF 05 03 02L .20 .312 3.125 .216 2.38 .394 CE-1014 FT-8
S05-KBLPL05 BPGF 05 03 02R .20 .312 3.125 .216 2.38 .394 CE-1014 FT-8
*Refer to insert page 64.
NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
– stocked
▫ – limited stock
186
Kendex Mini Boring Bars
Carbide Shank with Through-Coolant
E-CBF
C-KBF
metric
E06H-CBFPR 03 BPGF0302.. L.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6
E06H-CBFPL 03 BPGF0302.. R.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6
E06H-CBFPR 05 BPGF0503.. L.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8
E06H-CBFPL 05 BPGF0503.. R.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8
E08K-CBFPR 05 BPGF0503.. L.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8
E08K-CBFPL 05 ▫ BPGF0503.. R.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8
E10M-CBFPR 05 BPGF0503.. L.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8
E10M-CBFPL 05 ▫ BPGF0503.. R.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8
inch
C04-KBFPR03 — BPGF 03 02 02 L .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6
C04-KBFPR05 — BPGF 05 03 02 L .20 .250 3.938 .177 3.31 .315 .06 CE-1014 FT-6
C05-KBFPR05 — BPGF 05 03 02 L .20 .312 4.922 .216 4.12 .394 .08 CE-1014 FT-8
*Refer to insert page 64.
NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
– stocked
▫ – limited stock
187
Kendex Mini Boring Bars ®
metric
E06H-CBLPR 03 BPGF0302..L.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6
E06H-CBLPL 03 BPGF0302..R.. 3,5 6 100 3,25 16 6 1 E-1031 FT-6
E06H-CBLPR 05 BPGF0503..L.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8
E06H-CBLPL 05 BPGF0503..R.. 5,0 6 100 4,5 16 8 1 E-1014 FT-8
E08K-CBLPR 05 BPGF0503..L.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8
E08K-CBLPL 05 BPGF0503..R.. 5,0 8 125 5,5 20 10 2 E-1014 FT-8
E10M-CBLPR 05 BPGF0503..L.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8
E10M-CBLPL 05 BPGF0503..R.. 5,0 10 150 6,5 24 12 2 E-1014 FT-8
inch
C04-KBLPR03 BPGF 03 02 02 L .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6
C04-KBLPL03 BPGF 03 02 02 R .14 .250 3.938 .128 2.75 .250 .06 CE-1031 FT-6
C04-KBLPR05 BPGF 05 03 02 L .20 .250 3.938 .177 3.31 .315 .06 CE-1014 FT-8
C04-KBLPL05 BPGF 05 03 02 R .20 .250 3.938 .177 3.31 .315 .06 CE-1014 FT-8
C05-KBLPR05 BPGF 05 03 02 L .20 .312 4.922 .216 4.12 .394 .08 CE-1014 FT-8
C05-KBLPL05 BPGF 05 03 02 R .20 .312 4.922 .216 4.12 .394 .08 CE-1014 FT-8
*Refer to insert page 64.
NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
– stocked
▫ – limited stock
188
Top Notch Threading and Grooving Boring Bars
Identification System (Metric)
1.
Bar Style
steel
3.
with coolant Tool
Length
9.
carbide Insert Size
with coolant
5. 7.
K 125 Insert Insert
M 150 Shape Position
heavy metal insert
Q 180
N s
with coolant
R 200
0° number
S 250 1
2
2.54
3.81
T 300 3 4.95
U 350 4 6.48
A 12 R N N T 0 R 2
2. 4. 6. 8.
Bar Diameter Insert Bar Style Hand of Bar
Holding T
Method
N — Top Notch
right hand
integers to be preceded
by a 0.
example: “d” = 8 mm
indicated by code 08 left hand
189
Top Notch Threading and Grooving Boring Bars ®
1.
Bar Style
steel steel
with coolant
7.
carbide
5. Additional
carbide
with coolant Hand of Bar Information
3.
Insert Holding
Method
heavy metal interchangeable right hand
with coolant head
through-coolant
N* — Top Notch left hand interchangeable head
S 32 – N E R 3 W
2. 4. 6.
Bar Diameter Insert Location Insert Size
end mount
insert
undercut s
number
a two-digit number which
indicates the bar diameter 1 .100
in 1/16-inch increments 2 .150
3 .195
4 .255
5 .380
6 .383
8 .438
190
Top Notch Threading and Grooving Boring Bars
Steel Shank with Through-Coolant (Metric)
A..NNT
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand *
dg7 l f min. bore a
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand *
dg7 l f min. bore a
191
Top Notch Threading and Grooving Boring Bars ®
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand *
dg7 l f min. bore a
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand
*
dg7 l f min. bore a
192
Top Notch Threading and Grooving Boring Bars
Heavy Metal with Through-Coolant (Inch)
J-NE-S
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand *
dg7 l f min. bore a†
J-NE
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand left hand *
dg7 l f min. bore a†
– stocked
▫ – limited stock
193
LT Laydown Threading Bars ®
1.
Bar Type
A steel with coolant
*5.
S steel Insert Holding
Method
7.
Hand of Bar
E carbide with coolant 3.
Bar Diameter
insert screw
or
clamp
H interchangeable head
with coolant
S 08 12 – L S E R 2
2. 4. 6. 8.
Necked-Shank Insert Style Bar Style Insert Size
Bar Diameter L — laydown triangle
SM – Y E 3 – 2P
2. 4.
Y — shim for IC — 1/8ths inch
LT standard inserts
194
LT Laydown Threading Bars
LT Boring Bar and Head Identification System (Metric)
1.
Bar Type
*5.
A steel shank with internal Insert Holding
coolant supply
Method
7.
Hand of Bar
E carbide shank with internal
coolant supply
3. insert screw
Bar Diameter or
clamp
A 10 20 – L S E R 11
2. 4. 6. 8.
Necked-Shank Insert Style Bar Style Insert Size
Bar Diameter L — laydown triangle
l d (IC)
a two-digit number which
indicates the bar diameter 11 6.35
in mm increments 16 9.52
22 12.70
*NOTE: Toolholders with shank sizes larger than 5/8-inch (16 mm) are supplied with clamp and insert screw.
Secure the insert with either the clamp or insert screw. Do not use both.
195
Laydown Threading Bars ®
insert toolholder
shim ordering code
size ext. int.
feed direction standard helix - feed towards chuck reverse helix - feed away from chuck
shim angle 4.5 3.5 2.5 1.5 0.5 0 -0.5 -1.5
LT-16 (3/8") RH LH SM-YE3-3P SM-YE3-2P SM-YE3-1P SM-YE3 SM-YE3-1N SM-YE3-1.5N SM-YE3-2N SM-YE3-3N
LH RH SM-YI3-3P SM-YI3-2P SM-YI3-1P SM-YI3 SM-YI3-1N SM-YI3-1.5N SM-YI3-2N SM-YI3-3N
LT-22 (1/2") RH LH SM-YE4-3P SM-YE4-2P SM-YE4-1P SM-YE4 SM-YE4-1N SM-YE4-1.5N SM-YE4-2N SM-YE4-3N
LH RH SM-YI4-3P SM-YI4-2P SM-YI4-1P SM-YI4 SM-YI4-1N SM-YI4-1.5N SM-YI4-2N SM-YI4-3N
NOTE: For complete guidelines on shim selection, see pages 692-693 of Lathe Catalog 1010.
– stocked
▫ – limited stock
196
Laydown Threading Bars
Steel Shank without Through-Coolant (Inch)
S-LSE
metric
E16R-LSER16 — LT-16NR 16 — 11,5 200 2,5 S-SA3T — — — — FT-10
— E16R-LSEL16 ▫ LT-16NL 16 — 11,5 200 2,5 S-SA3T — — — — FT-10
inch
E06-LSER2 — LT-11NR 3/8 6 .280 .500 1/8 S-SN2T — — — — FT-8
— E06-LSEL2 LT-11NL 3/8 6 .280 .500 1/8 S-SN2T — — — — FT-8
E08-LSER2 — LT-11NR 1/2 8 .340 .650 3/16 S-SN2T — — — — FT-8
— E08-LSEL2 LT-11NL 1/2 8 .340 .650 3/16 S-SN2T — — — — FT-8
E10-LSER3 — LT-16NR 5/8 10 .460 .800 7/32 S-SA3T — — — — FT-10
— E10-LSEL3 LT-16NL 5/8 10 .460 .800 7/32 S-SA3T — — — — FT-10
NOTE: Refer to Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
– stocked
▫ – limited stock
197
Kennametal Micro
Boring Bars
198
Micro Boring Bars
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
199
Inch Boring Bars with Coolant Capable Steel Shank ®
A-Series
ATBI
See insert
BSBI-750-6 section, .750 1.010 6.000 see insert see insert BW-312 BS-8-32 BW-078
BSBI-1000-6 page 133. 1.000 1.010 6.000 section section BW-312 BS-8-32 BW-078
– stocked
▫ – limited stock
200
Inch Boring Bars with Steel Shank
Necked Shank Bars — 80° Diamond Screw-On Inserts
S-SCF – 90° Lead
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S3.206X-SCFDR1.2-0.5 S3.206X-SCFDL1.2-0.5 CDHB 1.20.60.5 .239 .375 .203 2.500 .500 .122 CC-11 FT-6
S3.206X-SCFDR1.2-1 S3.206X-SCFDL1.2-1 CDHB 1.20.60.5 .239 .375 .203 2.500 1.000 .122 CC-11 FT-6
S0406X-SCFDR1.2-0.75 S0406X-SCFDL1.2-0.75 CDHB 1.20.60.5 .292 .375 .260 2.500 .750 .152 CC-11 FT-6
S0406X-SCFDR1.2-1.25 S0406X-SCFDL1.21.25 CDHB 1.20.60.5 .292 .375 .260 2.500 1.250 .152 CC-11 FT-6
S3.208X-SCFDR1.2-0.5 S3.208X-SCFDL1.2-0.5 CDHB 1.20.60.5 .239 .500 .203 2.750 .500 .122 CC-11 FT-6
S3.208X-SCFDR1.2-1 S3.208X-SCFDL1.2-1 CDHB 1.20.60.5 .239 .500 .203 2.750 1.000 .122 CC-11 FT-6
S0408X-SCFDR1.2-0.75 S0408X-SCFDL1.2-0.75 CDHB 1.20.60.5 .292 .500 .260 2.750 .750 .152 CC-11 FT-6
S0408X-SCFDR1.2-1.25 S0408X-SCFDL1.2-1.25 CDHB 1.20.60.5 .292 .500 .260 2.750 1.250 .152 CC-11 FT-6
catalog number
Dmin dg7 d2 l1 f
right hand left hand
S03X-SCFDR1.2 — CDHB 1.20.60.5 .244 .187 .203 2.500 .122 CC-09 FT-6
S04F-SCFDR1.2 — CDHB 1.20.60.5 .292 .250 .260 3.000 .152 CC-11 FT-6
– stocked
▫ – limited stock
201
Inch Boring Bars with Steel Shank ®
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S2.906X-SCLDR1.2-0.5 S2.906X-SCLDL1.2-0.5 CDHB 1.20.60.5 .208 .375 .180 2.500 .500 .104 CC-09 FT-6
S2.906X-SCLDR1.2-1 S2.906X-SCLDL1.2-1 CDHB 1.20.60.5 .208 .375 .180 2.500 1.000 .104 CC-09 FT-6
S3.206X-SCLDR1.2-0.5 S3.206X-SCLDL1.2-0.5 CDHB 1.20.60.5 .230 .375 .203 2.500 .500 .116 CC-11 FT-6
S3.206X-SCLDR1.2-1 S3.206X-SCLDL1.2-1 CDHB 1.20.60.5 .230 .375 .203 2.500 1.000 .116 CC-11 FT-6
S0406X-SCLDR1.2-0.75 S0406X-SCLDL1.2-0.75 CDHB 1.20.60.5 .285 .375 .260 2.500 .750 .145 CC-11 FT-6
S0406X-SCLDR1.2-1.25 S0406X-SCLDL1.2-1.25 CDHB 1.20.60.5 .285 .375 .260 2.500 1.250 .145 CC-11 FT-6
S2.908X-SCLDR1.2-0.5 S2.908X-SCLDL1.2-0.5 CDHB 1.20.60.5 .208 .500 .180 2.750 .500 .104 CC-09 FT-6
S2.908X-SCLDR1.2-1 S2.908X-SCLDL1.2-1 CDHB 1.20.60.5 .208 .500 .180 2.750 1.000 .104 CC-09 FT-6
S3.208X-SCLDR1.2-0.5 S3.208X-SCLDL1.2-0.5 CDHB 1.20.60.5 .230 .500 .203 2.750 .500 .116 CC-11 FT-6
S3.208X-SCLDR1.2-1 S3.208X-SCLDL1.2-1 CDHB 1.20.60.5 .230 .500 .203 2.750 1.000 .116 CC-11 FT-6
S0408X-SCLDR1.2-0.75 S0408X-SCLDL1.2-0.75 CDHB 1.20.60.5 .285 .500 .260 2.750 .750 .145 CC-11 FT-6
S0408X-SCLDR1.2-1.25 S0408X-SCLDL1.2-1.25 CDHB 1.20.60.5 .285 .500 .260 2.750 1.250 .145 CC-11 FT-6
catalog number
Dmin d1 d2 l1 f
right hand left hand
S03X-SC7DR1.2* S03X-SC7DL1.2* CDHB 1.20.60.5 .180 .187 .165 2.500 .094 CC-09 FT-6
S03X-SCLDR1.2A S03X-SCLDL1.2A ▫ CDHB 1.20.60.5 .208 .187 .180 2.500 .104 CC-09 FT-6
S03X-SCLDR1.2 S03X-SCLDL1.2 CDHB 1.20.60.5 .230 .187 .203 2.500 .116 CC-09 FT-6
S04F-SCLDR1.2 S04F-SCLDL1.2 CDHB 1.20.60.5 .285 .250 .260 3.000 .145 CC-11 FT-6
*97° on these bars
– stocked
▫ – limited stock
202
Inch Profiling Boring Bars with Steel Shank
45° Diamond Screw-On Inserts
S-SGR – 95° Lead
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S0408H-SGRPR5-1 S0408H-SGRPL5-1 GPCD-50.5 .400 .500 .260 4.000 1.000 .260 CT-15 FT-6
S0508H-SGRPR5-1.25 S0508H-SGRPL5-1.25 GPCD-50.5 .463 .500 .323 4.000 1.250 .291 CT-15 FT-6
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S0408H-SG22.5PR5-1 S0408H-SG22.5PL5-1 GPCD-50.5 .400 .500 .260 4.000 1.000 .260 CT-15 FT-6
S0508H-SG22.5PR5-1.25 S0508H-SG22.5PL5-1.25 GPCD-50.5 .463 .500 .323 4.000 1.250 .291 CT-15 FT-6
– stocked
▫ – limited stock
203
Inch Boring Bars with Steel Shank ®
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S3.208F-STFDR1.28-0.5 S3.208F-STFDL1.28-0.5 TDHB 1.280.750.5 .275 .500 .203 3.000 .500 .134 FC-11 FT-7
S3.208F-STFDR1.28-1 S3.208F-STFDL1.28-1 TDHB 1.280.750.5 .275 .500 .203 3.000 1.000 .134 FC-11 FT-7
S0408F-STFDR1.28-0.75 S0408F-STFDL1.28-0.75 TDHB 1.280.750.5 .300 .500 .259 3.000 .750 .156 FC-14 FT-7
S0408F-STFDR1.28-1.25 S0408F-STFDL1.28-1.25 TDHB 1.280.750.5 .300 .500 .259 3.000 1.250 .156 FC-14 FT-7
S0508F-STFDR1.28-1 S0508F-STFDL1.28-1 TDHB 1.280.750.5 .360 .500 .321 3.000 1.000 .187 FC-14 FT-7
S0508F-STFDR1.28-1.5 S0508F-STFDL1.28-1.5 TDHB 1.280.750.5 .360 .500 .321 3.000 1.500 .187 FC-14 FT-7
S3.210H-STFDR1.28-0.5 S3.210H-STFDL1.28-0.5 TDHB 1.280.750.5 .275 .625 .203 4.000 .500 .134 FC-11 FT-7
S3.210H-STFDR1.28-1 S3.210H-STFDL1.28-1 TDHB 1.280.750.5 .275 .625 .203 4.000 1.000 .134 FC-11 FT-7
S0410H-STFDR1.28-0.75 S0410H-STFDL1.28-0.75 TDHB 1.280.750.5 .300 .625 .259 4.000 .750 .156 FC-14 FT-7
S0410H-STFDR1.28-1.25 S0410H-STFDL1.28-1.25 TDHB 1.280.750.5 .300 .625 .259 4.000 1.250 .156 FC-14 FT-7
S0510H-STFDR1.28-1 S0510H-STFDL1.28-1 TDHB 1.280.750.5 .360 .625 .321 4.000 1.000 .187 FC-14 FT-7
S0510H-STFDR1.28-1.5 S0510H-STFDR1.28-1.5 TDHB 1.280.750.5 .360 .625 .321 4.000 1.500 .187 FC-14 FT-7
S0608X-STFDR2-1.12 S0608X-STFDL2-1.12 TPCB-220.5 .438 .500 .390 3.750 1.125 .221 QC-21 FT-9
S0608X-STFDR2-1.88 S0608X-STFDL2-1.88 TPCB-220.5 .438 .500 .390 3.750 1.875 .221 QC-21 FT-9
S0610X-STFDR2-1.12 S0610X-STFDL2-1.12 TPCB-220.5 .438 .625 .390 4.250 1.125 .221 QC-21 FT-9
S0610X-STFDR2-1.88 S0610X-STFDL2-1.88 TPCB-220.5 .438 .625 .390 4.250 1.875 .221 QC-21 FT-9
S0810X-STFDR2-1.5 S0810X-STFDL2-1.5 TPCB-220.5 .563 .625 .510 4.250 1.500 .296 QC-26 FT-9
S0810X-STFDR2-2.5 S0810X-STFDL2-2.5 TPCB-220.5 .563 .625 .510 4.250 2.500 .296 QC-26 FT-9
S0612H-STFDR2-1.5 S0612H-STFDL2-1.5 TPCB-220.5 .438 .750 .390 4.000 1.500 .221 QC-21 FT-9
S1012J-STFDR2-2.5 S1012J-STFDL2-2.5 TPCB-220.5 .688 .750 .625 4.500 2.500 .353 QC-26 FT-9
catalog number
Dmin d1 d2 l1 f
right hand left hand
S03G-STFDR1.28 ▫ S03G-STFDL1.28 ▫ TDHB 1.280.750.5 .275 .187 .197 3.500 .123 FC-11 FT-7
S04H-STFDR1.28 S04H-STFDL1.28 ▫ TDHB 1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7
S05H-STFDR1.28 S05H-STFDL1.28 TDHB 1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7
S06K-STFDR2 S06K-STFDL2 TPCB-220.5 .438 .375 .385 5.000 .221 QC-21 FT-9
S08M-STFDR2 S08M-STFDL2 TPCB-220.5 .563 .500 .510 6.000 .296 QC-26 FT-9
S10Q-STFDR6P S10Q-STFDL6P TD-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-9
S12R-STFDR6P S12R-STFDL6P TD-6P0.5 .855 .750 .760 8.000 .460 SC-30 FT-9
– stocked
▫ – limited stock
204
Inch Boring Bars with Steel Shank
Necked Shank Bars — Triangle Screw-On Inserts
S-STL – 95° Lead
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
S3.208F-STLDR1.28-0.5 S3.208F-STLDL1.28-0.5 TDHB 1.280.750.5 .275 .500 .203 3.000 .500 .126 FC-11 FT-7
S3.208F-STLDR1.28-1 S3.208F-STLDL1.28-1 TDHB 1.280.750.5 .275 .500 .203 3.000 1.000 .126 FC-11 FT-7
S0408F-STLDR1.28-0.75 S0408F-STLDL1.28-0.75 TDHB 1.280.750.5 .300 .500 .259 3.000 .750 .156 FC-14 FT-7
S0408F-STLDR1.28-1.25 S0408F-STLDL1.28-1.25 TDHB 1.280.750.5 .300 .500 .259 3.000 1.250 .156 FC-14 FT-7
S0508F-STLDR1.28-1 S0508F-STLDL1.28-1 TDHB 1.280.750.5 .360 .500 .321 3.000 1.000 .187 FC-14 FT-7
S0508F-STLDR1.28-1.5 S0508F-STLDL1.28-1.5 TDHB 1.280.750.5 .360 .500 .321 3.000 1.500 .187 FC-14 FT-7
S3.210H-STLDR1.28-0.5 S3.210H-STLDL1.28-0.5 TDHB 1.280.750.5 .275 .625 .203 4.000 .500 .126 FC-11 FT-7
S3.210H-STLDR1.28-1 S3.210H-STLDL1.28-1 TDHB 1.280.750.5 .275 .625 .203 4.000 1.000 .126 FC-11 FT-7
S0410H-STLDR1.28-0.75 S0410H-STLDL1.28-0.75 TDHB 1.280.750.5 .300 .625 .259 4.000 .750 .156 FC-14 FT-7
S0410H-STLDR1.28-1.25 S0410H-STLDL1.28-1.25 TDHB 1.280.750.5 .300 .625 .259 4.000 1.250 .156 FC-14 FT-7
S0510H-STLDR1.28-1 S0510H-STLDL1.28-1 TDHB 1.280.750.5 .360 .625 .321 4.000 1.000 .187 FC-14 FT-7
S0510H-STLDR1.28-1.5 S0510H-STLDL1.28-1.5 TDHB 1.280.750.5 .360 .625 .321 4.000 1.500 .187 FC-14 FT-7
S0608X-STLDR2-1.12 S0608XX-STLDL2-1.12 TPCB-220.5 .438 .500 .390 3.750 1.125 .221 QC-21 FT-9
S0608X-STLDR2-1.88 S0608X-STLDL2-1.88 TPCB-220.5 .438 .500 .390 3.750 1.875 .221 QC-21 FT-9
S0610X-STLDR2-1.12 S0610X-STLDL2-1.12 TPCB-220.5 .438 .625 .390 4.250 1.125 .221 QC-21 FT-9
S0610X-STLDR2-1.88 S0610X-STLDL2-1.88 TPCB-220.5 .438 .625 .390 4.250 1.875 .221 QC-21 FT-9
S0810X-STLDR2-1.5 S0810X-STLDL2-1.5 TPCB-220.5 .563 .625 .510 4.250 1.500 .296 QC-26 FT-9
S0810X-STLDR2-2.5 S0810X-STLDL2-2.5 TPCB-220.5 .563 .625 .510 4.250 2.500 .296 QC-26 FT-9
S0612H-STLDR2-1.5 S0612H-STLDL2-1.5 TPCB-220.5 .438 .750 .390 4.000 1.500 .221 QC-21 FT-9
S1012J-STLDR2-2.5 S1012J-STLDL2-2.5 TPCB-220.5 .688 .750 .625 4.500 2.500 .353 QC-26 FT-9
catalog number
Dmin d1 d2 l1 f
right hand left hand
S03G-STLDR1.28 S03G-STLDL1.28 ▫ TDHB 1.280.750.5 .275 .187 .197 3.500 .123 FC-11 FT-7
S04H-STLDR1.28 S04H-STLDL1.28 ▫ TDHB 1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7
S05H-STLDR1.28 S05H-STLDL1.28 ▫ TDHB 1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7
S06K-STLDR2 S06K-STLDL2 TPCB-220.5 .438 .375 .385 5.000 .221 QC-21 FT-9
S08M-STLDR2 S08M-STLDL2 TPCB-220.5 .563 .500 .510 6.000 .296 QC-26 FT-9
S10Q-STLDR6P S10Q-STLDL6P TD-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-10
S12R-STLDR6P S12R-STLDL6P TD-6P0.5 .855 .750 .760 8.000 .460 SC-30 FT-10
– stocked
▫ – limited stock
205
Inch Boring Bars with Offset Steel Shanks ®
catalog number
Dmin d1 d2 l1 l2 f h w
right hand left hand
S0612X-STFDR2-1.5E — TPCB-220.5 .727 .750 .375 3.750 1.500 .024 .399 .423 QC-26 FT-9
S0816X-STFDR6P-1.5E — TD-6P0.5 .969 1.000 .500 3.750 1.500 .070 .569 .639 SC-38 FT-10
S0816X-STFDR6P-2.5E — TD-6P0.5 .969 1.000 .500 4.750 2.500 .070 .569 .639 SC-38 FT-10
catalog number
Dmin d1 d2 l1 l2 f h w
right hand left hand
S0612X-STLDR2-1.5E — TPCB-220.5 .727 .750 .375 3.750 1.500 .024 .399 .423 QC-26 FT-9
S0816X-STLDR6P-1.5E — TD-6P0.5 .969 1.000 .500 3.750 1.500 .070 .569 .639 SC-38 FT-10
S0816X-STLDR6P-2.5E — TD-6P0.5 .969 1.000 .500 4.750 2.500 .070 .569 .639 SC-38 FT-10
– stocked
▫ – limited stock
206
Inch Boring Bars with Steel Shank
Trigon Inserts
S-SWU – 93° Lead
catalog number
Dmin d1 d2 l1 f
right hand left hand
S03H-SWUDR1.5 S03H-SWUDL1.5 WPGT-1.510.5 .260 .187 .225 4.000 .126 MS-1438 FT-5
S04H-SWUDR1.5 S04H-SWUDL1.5 WPGT-1.510.5 .285 .250 .260 4.000 .143 MS-1438 FT-5
S05H-SWUDR1.5 S05H-SWUDL1.5 WPGT-1.510.5 .347 .312 .322 4.000 .174 MS-1438 FT-5
S06K-SWUDR2 S06K-SWUDL2 WPGT-21.50.5 .415 .187 .385 5.000 .211 MS-1153 FT-7
S08M-SWUDR2 S08M-SWUDL2 WPGT-21.50.5 .540 .250 .510 6.000 .273 MS-1153 FT-7
Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.
catalog number
Dmin d1 d2 l1 f
right hand left hand
207
Inch Boring Bars with Coolant Capable Steel Shank ®
Triangle Screw-On
A-STF – 90° Lead
catalog number
Dmin d1 d2 l1 f
right hand left hand
catalog number
Dmin d1 d2 l1 f
right hand left hand
A06K-STLDR2 — TPCB- 220.5 .438 .375 .385 5.000 .221 QC-21 FT-9
A08M-STLDR2 — TPCB- 220.5 .563 .500 .510 6.000 .296 QC-26 FT-9
A10Q-STLDR6P — TP-6P0.5 .731 .625 .635 7.000 .393 SC-30 FT-10
A12R-STLDR6P — TP-6P0.5 .855 .750 .760 8.000 .460 SC-38 FT-10
– stocked
▫ – limited stock
208
Inch Boring Bars
Carbide Bar and Steel Shank — 80° Diamond Insert
C-SCF – 90° Lead
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
catalog number
Dmin d1 d2 l1 f
right hand left hand
C03H-SCFDR1.2 C03H-SCFDL1.2 CDHB-1.20.60.5 .231 .187 .193 4.000 .117 CC-11 FT-6
C04H-SCFDR1.2 C04H-SCFDL1.2 CDHB-1.20.60.5 .292 .250 .258 4.000 .152 CC-11 FT-6
C04M-SCFDR1.2 C04M-SCFDL1.2 CDHB-1.20.60.5 .292 .250 .258 6.000 .152 CC-11 FT-6
C05M-SCFDR1.2 C05M-SCFDL1.2 CDHB-1.20.60.5 .356 .312 .322 6.000 .185 CC-11 FT-6
– stocked
▫ – limited stock
209
Inch Boring Bars ®
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
C2.910X-SCLDR1.2-0.88 C2.910X-SCLDL1.2-0.88 CDHB-1.20.60.5 .208 .625 .189 3.875 0.875 .104 CC-9 FT-6
C2.910X-SCLDR1.2-1.88 C2.910X-SCLDL1.2-1.88 CDHB-1.20.60.5 .208 .625 .189 4.875 1.875 .104 CC-9 FT-6
C3.210H-SCLDR1.2-1 C3.210H-SCLDL1.2-1 CDHB-1.20.60.5 .230 .625 .210 4 1 .119 CC-11 FT-6
C3.210K-SCLDR1.2-2 C3.210K-SCLDL1.2-2 CDHB-1.20.60.5 .230 .625 .210 5 2 .119 CC-11 FT-6
C0410H-SCLDR1.2-1.25 C0410H-SCLDL1.2-1.25 CDHB-1.20.60.5 .285 .625 .258 4 1.25 .145 CC-11 FT-6
C0410X-SCLDR1.2-2.5 C0410X-SCLDL1.2-2.5 CDHB-1.20.60.5 .285 .625 .258 5.25 2.5 .145 CC-11 FT-6
C2.908X-SCLDR1.2-0.88 C2.908X-SCLDL1.2-0.88 CDHB-1.20.60.5 .208 .500 .189 2.375 0.875 .104 CC-9 FT-6
C2.908X-SCLDR1.2-1.88 — CDHB-1.20.60.5 .208 .500 .189 3.375 1.875 .104 CC-9 FT-6
C3.208X-SCLDR1.2-1 C3.208X-SCLDL1.2-1 CDHB-1.20.60.5 .230 .500 .210 2.5 1 .119 CC-11 FT-6
C3.208G-SCLDR1.2-2 — CDHB-1.20.60.5 .230 .500 .210 3.5 2 .119 CC-11 FT-6
C0408X-SCLDR1.2-1.25 C0408X-SCLDL1.2-1.25 CDHB-1.20.60.5 .285 .500 .258 2.75 1.25 .145 CC-11 FT-6
C0408H-SCLDR1.2-2.5 C0408H-SCLDL1.2-2.5 CDHB-1.20.60.5 .285 .500 .258 4 2.5 .145 CC-11 FT-6
catalog number
Dmin d1 d2 l1 f
right hand left hand
C03H-SCLDR1.2 C03H-SCLDL1.2 CDHB-1.20.60.5 .222 .187 .193 4.000 .111 CC-11 FT-6
C03M-SCLDR1.2 C03M-SCLDL1.2 CDHB-1.20.60.5 .222 .187 .193 6.000 .111 CC-11 FT-6
C04H-SCLDR1.2 C04H-SCLDL1.2 CDHB-1.20.60.5 .285 .250 .258 4.000 .145 CC-11 FT-6
C04M-SCLDR1.2 C04M-SCLDL1.2 CDHB-1.20.60.5 .285 .250 .258 6.000 .145 CC-11 FT-6
C05M-SCLDR1.2 C05M-SCLDL1.2 CDHB-1.20.60.5 .356 .312 .322 6.000 .185 CC-11 FT-6
– stocked
▫ – limited stock
210
Inch Profiling Boring Bars with Carbide Shank
45° Diamond Inserts
C-SG – 95° Lead
catalog number
Dmin d1 d2 l1 f
right hand left hand
C04M-SGLPR5 C04M-SGLPL5 GPCD-50.5 .400 .250 .260 6.000 .260 CT-15 FT-6
C05M-SGLPR5 C05M-SGLPL5 GPCD-50.5 .463 .312 .322 6.000 .291 CT-15 FT-6
catalog number
Dmin d1 d2 l1 f
right hand left hand
C04M-SG22.5PR5 C04M-SG22.5PL5 GPCD-50.5 .400 .250 .260 6.000 .260 CT-15 FT-6
C05M-SG22.5PR5 C05M-SG22.5PL5 GPCD-50.5 .463 .312 .322 6.000 .291 CT-15 FT-6
– stocked
▫ – limited stock
211
Inch Boring Bars ®
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
C3.208X-STFDR1.28-1 — TDHB-1.280.750.5 .275 .500 .207 2.500 1.000 .134 FC-11 FT-7
C3.208G-STFDR1.28-2 — TDHB-1.280.750.5 .275 .500 .207 3.500 2.000 .134 FC-11 FT-7
C0408X-STFDR1.28-1.25 — TDHB-1.280.750.5 .300 .500 .260 2.750 1.250 .156 FC-14 FT-7
C0408H-STFDR1.28-2.5 — TDHB-1.280.750.5 .300 .500 .260 4.000 2.500 .156 FC-14 FT-7
C0508F-STFDR1.28-1.5 — TDHB-1.280.750.5 .360 .500 .322 3.000 1.500 .187 FC-14 FT-7
C0508X-STFDR1.28-3.12 — TDHB-1.280.750.5 .360 .500 .322 4.625 3.125 .187 FC-14 FT-7
C0310H-STFDR1.28-1 — TDHB-1.280.750.5 .275 .625 .207 4.000 1.000 .134 FC-11 FT-7
C0310K-STFDR1.28-2 — TDHB-1.280.750.5 .275 .625 .207 5.000 2.000 .134 FC-11 FT-7
C0410H-STFDR1.28-1.25 — TDHB-1.280.750.5 .300 .625 .260 4.000 1.250 .156 FC-14 FT-7
C0410X-STFDR1.28-2.5 — TDHB-1.280.750.5 .300 .625 .260 5.250 2.500 .156 FC-14 FT-7
C0510H-STFDR1.28-1.5 — TDHB-1.280.750.5 .360 .625 .322 4.000 1.500 .187 FC-14 FT-7
C0510X-STFDR1.28-3.12 — TDHB-1.280.750.5 .360 .625 .322 5.625 3.125 .187 FC-14 FT-7
catalog number
Dmin d1 d2 l1 f
right hand left hand
C04M-STFDR1.28 C04M-STFDL1.28 TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7
C05M-STFDR1.28 C05M-STFDL1.28 TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7
C06S-STFDR2 C06S-STFDL2 TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9
C08S-STFDR2 C08S-STFDL2 TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9
C10M-STFPR6P C10M-STFPL6P TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10
C12S-STFPR6P C12S-STFPL6P TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10
– stocked
▫ – limited stock
212
Inch Boring Bars
Carbide Bar with Steel Shank — Triangle Inserts
C-STL – 95° Lead
catalog number
Dmin d1 d2 l1 l2 f
right hand left hand
C3.208X-STLDR1.28-1 C3.208X-STLDL1.28-1 TDHB-1.280.750.5 .275 .500 .207 2.500 1.000 .126 FC-11 FT-7
C3.208G-STLDR1.28-2 — TDHB-1.280.750.5 .275 .500 .207 3.500 2.000 .126 FC-11 FT-7
C0408X-STLDR1.28-1.25 C0408X-STLDL1.28-1.25 TDHB-1.280.750.5 .300 .500 .260 2.750 1.250 .156 FC-14 FT-7
C0408H-STLDR1.28-2.5 — TDHB-1.280.750.5 .300 .500 .260 4.000 2.500 .156 FC-14 FT-7
C0508F-STLDR1.28-1.5 C0508F-STLDL1.28-1.5 TDHB-1.280.750.5 .360 .500 .322 3.000 1.500 .187 FC-14 FT-7
C0508X-STLDR1.28-3.12 — TDHB-1.280.750.5 .360 .500 .322 4.625 3.125 .187 FC-14 FT-7
C0310H-STLDR1.28-1 C0310H-STLDL1.28-1 TDHB-1.280.750.5 .275 .625 .207 4.000 1.000 .126 FC-11 FT-7
C0310K-STLDR1.28-2 — TDHB-1.280.750.5 .275 .625 .207 5.000 2.000 .126 FC-11 FT-7
C0410H-STLDR1.28-1.25 C0410H-STLDL1.28-1.25 TDHB-1.280.750.5 .300 .625 .260 4.000 1.250 .156 FC-14 FT-7
C0410X-STLDR1.28-2.5 — TDHB-1.280.750.5 .300 .625 .260 5.250 2.500 .156 FC-14 FT-7
C0510H-STLDR1.28-1.5 C0510H-STLDL1.28-1.5 TDHB-1.280.750.5 .360 .625 .322 4.000 1.500 .187 FC-14 FT-7
C0510X-STLDR1.28-3.12 — TDHB-1.280.750.5 .360 .625 .322 5.625 3.125 .187 FC-14 FT-7
catalog number
Dmin d1 d2 l1 f
right hand left hand
C04M-STLDR1.28 C04M-STLDL1.28 TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7
C05M-STLDR1.28 C05M-STLDL1.28 TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7
C06S-STLDR2 C06S-STLDL2 TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9
C08S-STLDR2 C08S-STLDL2 TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9
C10M-STLDR6P C10M-STLDL6P TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10
C12S-STLDR6P C12S-STLDL6P TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10
– stocked
▫ – limited stock
213
Inch Boring Bars with Carbide Shank ®
Trigon Inserts
C-SWU – 93° Lead
catalog number
Dmin d1 d2 l1 f
right hand left hand
C03M-SWUDR1.5 C03M-SWUDL1.5 WPGT-1.510.5 .260 .187 .225 6.000 .126 MS-1438 FT-5
C04M-SWUDR1.5 C04M-SWUDL1.5 WPGT-1.510.5 .285 .250 .260 6.000 .143 MS-1438 FT-5
C05M-SWUDR1.5 C05M-SWUDL1.5 WPGT-1.510.5 .347 .312 .322 6.000 .174 MS-1438 FT-5
C06M-SWUDR2 C06M-SWUDL2 WPGT-21.50.5 .415 .375 .385 6.000 .211 MS-1153 FT-7
C08R-SWUDR2 C08R-SWUDL2 WPGT-21.50.5 .540 .500 .510 8.000 .273 MS-1153 FT-7
Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.
catalog number *
Dmin d1 d2 l1 f
right hand left hand
214
Inch Boring Bars with Coolant Capable Carbide Shank
80° Diamond Screw-On Inserts
E-SCF – 90° Lead
catalog number
Dmin d1 d2 l1 f
right hand left hand
E03H-SCFDR1.2 E03H-SCFDL1.2 ▫ CDHB-1.20.60.5 .231 .187 .193 4.000 .117 CC-11 FT-6
E03M-SCFDR1.2 E03M-SCFDL1.2 ▫ CDHB-1.20.60.5 .231 .187 .193 6.000 .117 CC-11 FT-6
E04H-SCFDR1.2 ▫ — CDHB-1.20.60.5 .292 .250 .258 4.000 .152 CC-11 FT-6
E04M-SCFDR1.2 — CDHB-1.20.60.5 .292 .250 .258 6.000 .152 CC-11 FT-6
catalog number
Dmin d1 d2 l1 f
right hand left hand
E2.5M-SC7DR1.2* E2.5M-SC7DL1.2* ▫ CDHB-1.20.60.5 .180 .156 .165 6.000 .094 CC-09 FT-6
E03H-SCLDR1.2 — CDHB-1.20.60.5 .208 .187 .189 4.000 .104 CC-09 FT-6
E03M-SCLDR1.2 E03M-SCLDL1.2 ▫ CDHB-1.20.60.5 .208 .187 .189 6.000 .104 CC-09 FT-6
E03H-SCLDR1.2A E03H-SCLDL1.2A CDHB-1.20.60.5 .222 .187 .193 4.000 .111 CC-11 FT-6
E03M-SCLDR1.2A E03M-SCLDL1.2A CDHB-1.20.60.5 .222 .187 .193 6.000 .111 CC-11 FT-6
E04H-SCLDR1.2 E04H-SCLDL1.2 CDHB-1.20.60.5 .285 .250 .258 4.000 .145 CC-11 FT-6
E04M-SCLDR1.2 E04M-SCLDL1.2 ▫ CDHB-1.20.60.5 .285 .250 .258 6.000 .145 CC-11 FT-6
215
Inch Boring Bars with Coolant Capable Carbide Shank ®
catalog number
Dmin d1 d2 l1 f
right hand left hand
E03H-STFDR1.28 ▫ E03H-STFDL1.28 TDHB-1.280.750.5 .275 .187 .203 4.000 .134 FC-11 FT-7
E03M-STFDR1.28 ▫ E03M-STFDL1.28 ▫ TDHB-1.280.750.5 .275 .187 .203 6.000 .134 FC-11 FT-7
E04H-STFDR1.28 E04H-STFDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7
E04M-STFDR1.28 ▫ E04M-STFDL1.28 TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7
E05H-STFDR1.28 E05H-STFDL1.28 TDHB-1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7
E05M-STFDR1.28 E05M-STFDL1.28 TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7
E06S-STFDR2 E06S-STFDL2 TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9
E08S-STFDR2 E08S-STFDL2 TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9
E10M-STFDR6P E10M-STFDL6P TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10
E12S-STFDR6P E12S-STFDL6P TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10
catalog number
Dmin d1 d2 l1 f
right hand left hand
E03H-STLDR1.28 E03H-STLDL1.28 TDHB-1.280.750.5 .275 .187 .203 4.000 .126 FC-11 FT-7
E03M-STLDR1.28 E03M-STLDL1.28 TDHB-1.280.750.5 .275 .187 .203 6.000 .126 FC-11 FT-7
E04H-STLDR1.28 E04H-STLDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 4.000 .156 FC-14 FT-7
E04M-STLDR1.28 E04M-STLDL1.28 ▫ TDHB-1.280.750.5 .300 .250 .260 6.000 .156 FC-14 FT-7
E05H-STLDR1.28 E05H-STLDL1.28 ▫ TDHB-1.280.750.5 .360 .312 .322 4.000 .187 FC-14 FT-7
E05M-STLDR1.28 E05M-STLDL1.28 ▫ TDHB-1.280.750.5 .360 .312 .322 6.000 .187 FC-14 FT-7
E06S-STLDR2 E06S-STLDL2 TPCB-220.5 .438 .375 .390 10.000 .221 QC-21 FT-9
E08S-STLDR2 E08S-STLDL2 TPCB-220.5 .563 .500 .510 10.000 .296 QC-26 FT-9
E10M-STLDR6P E10M-STLDL6P TD-6P0.5 .731 .625 .635 6.000 .393 SC-30 FT-10
E12S-STLDR6P E12S-STLDL6P TD-6P0.5 .855 .750 .760 10.000 .460 SC-30 FT-10
– stocked
▫ – limited stock
216
Boring Bar Sets and Accessories
Steel and Carbide
Driver Bits
catalog torque
description
number in./lbs
KCS-10 S03X-SC7DR1.2A 1 CDHB-1.20.60.5 10 CC-09 FT-6 DRIVER Magnetic Bit Driver Handle
S03X-SCLDR1.2 1 (KC5010) CC-11
S04F-SCLDR1.2 1
KCC-10 E03H-SCLDR1.2 1 CDHB-1.20.60.5 10 CC-09 FT-6 CTS30 Adjustable Magnetic Torque Driver
E03H-SCLDR1.2A 1 (KC5010) CC-11
E04H-SCLDR1.2 1
KCSC (Steel/Carbide)
set insert
catalog set contents bars qty qty wrenches
(grade)
number Level
KCSC-10 S03X-SC7DR1.2 1 CDHH-1.20.60.51 5 FT-7
E03M-SCLDR1.2A 1 (KC5010) FT-6 catalog description
number
S04H-STLDR1.28 1 TDHH-1.280.750.51 5
S05H-STFDR1.28 1 (KC5010)
UNILEVEL Adjustable Precision Setup Level
217
Kennametal
THE METALCUTTING AUTHORITY ™
PRESENTING...
TOLL-FREE CUSTOMER
APPLICATION SUPPORT
www.kennametal.com
218
High-Performance
Solid Carbide Drills page
Dynapoint® TF Drill
K105, B105 (without coolant) . . . . . . . . . . . . . 220
Dynapoint SE Drill
B221, K222 (without coolant). . . . . . . . . . . . . . . . . 225
General Purpose
Series CR100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
219
High-Performance Solid Carbide Drills ®
Features low-carbon
steels (< .25% C) (<220 HB) X
• Three spacious helical flutes provide
rapid chip evacuation and heat dissipation free-machining (<275 HB)
X
to enable higher metal removal rates. steels
The TF drill with TiAlN coating KC7210 is best grade composition and application
suited for harder, abrasive, short-chipping K10 composition: An uncoated straight 6% cobalt grade. Fine grain. Good wear
material like gray cast iron, ductile iron, and resistance with some toughness.
malleable cast iron. The TiAlN-coated drill application: Use on gray cast iron, aluminum, and non-ferrous
works very well with flood or mist coolant and workpiece materials.
in dry drilling. geometry: Lightly honed cutting edges.
220
High-Performance Solid Carbide Drills
Dynapoint TF Drills without Coolant
B105 – metric
tolerances
tolerance tolerance
d1 m7 d2 h6
≤3 0,002/0,012 6 0,000/-0,008
>3 to 6 0,004/0,016 8 to 10 0,000/-0,009
>6 to 10 0,006/0,021 12 to 18 0,000/-0,011
>10 to 18 0,007/0,025 20 0,000/-0,013
>18 to 21 0,008/0,029 — —
d1 grade
d2 l1 l2 l3 l4 l5
catalog number mm mm mm mm mm mm
mm decimal K10 KC7210
221
High-Performance Solid Carbide Drills ®
d1 grade
d2 l1 l2 l3 l4 l5
catalog number mm mm mm mm mm mm
mm decimal K10 KC7210
222
High-Performance Solid Carbide Drills
Dynapoint TF Drills without Coolant
K105 – inch
tolerances
tolerance tolerance
d1 m7 d2 h6
≤.1181 .0001/.0005 .1875 .0000/-.0003
>.1181 to .2362 .0002/.0006 .2500 to .6875 .0000/-.0004
>.2362 to .3937 .0002/.0008 .7500 to .8125 .0000/-.0005
>.3937 to .7087 .0003/.0010 — —
>.7087 to .8101 .0003/.0011 — —
223
High-Performance Solid Carbide Drills ®
224
High-Performance Solid Carbide Drills
Dynapoint SE Drills without Coolant
B221 - metric sizes 3 mm to 21 mm short length grade CS5
K222 - inch sizes .125" to .750" regular length grade KC7215
Primary Application
SE drills without coolant are best applied
on short-hole applications. These drills may hardness/type drill application
recommendation
increase tool life compared to drills with - / low high / +
coolant by avoiding thermal shock at the workpiece
cutting edge. Drill strength is increased by material group
the absence of coolant holes. Deeper holes
low-carbon
benefit from the flushing action of the coolant steels (< .25% C) (<220 HB) ★
to remove chips from the cutting zone.
free-machining (<275 HB)
The K222 SE drill features a KC7215 carbide steels ★
grade; the B221 drill is manufactured with a
CS5 carbide grade. Both are ideal for plain medium and high plain-carbon (≤330 HB)
alloy, and tool steels ★
carbon, alloy, and tool steel applications. In
addition, K222 performs well on cast iron medium and high plain-carbon (340-450 HB)
and ductile iron. alloy, and tool steels ★
• The carbide substrate of the SE221 drill is a ductile (nodular) and (120-320 HB)
O
malleable cast irons
multi-purpose submicron grade with TiN
coating. The SE222 features a TiAlN coating gray cast O
that offers excellent hot hardness. irons (120-320 HB)
Grade Description
grade composition and application
CS5 composition: A PVD TiN coated grade. Straight 9.5% cobalt substrate.
NOTE: See page 575 of Holemaking Catalog 0070
Submicron grain. Muti-purpose use.
(A00-2) for additional technical information.
application: Apply on plain-carbon steel, alloy steel, and ductile cast iron.
geometry: Moderately honed cutting edges with a protection chamfer.
225
High-Performance Solid Carbide Drills ®
d1
d2 l1 l2 l3 l4 l5 grade
catalog number mm mm mm mm mm mm CS5
mm decimal
226
High-Performance Solid Carbide Drills
Dynapoint SE Drills without Coolant
B221 – metric
tolerances
tolerance tolerance
d1 m7 d2 h6
≤3 0,002/0,012 6 0,000/-0,008
>3 to 6 0,004/0,016 8 to 10 0,000/-0,009
>6 to 10 0,006/0,021 12 to 18 0,000/-0,011
>10 to 18 0,007/0,025 20 0,000/-0,013
>18 to 21 0,008/0,029 — —
d1
d2 l1 l2 l3 l4 l5 grade
catalog number mm mm mm mm mm mm CS5
mm decimal
227
High-Performance Solid Carbide Drills ®
d1
d2 l1 l2 l3 l4 l5 grade
catalog number mm mm mm mm mm mm CS5
mm decimal
228
High-Performance Solid Carbide Drills
Dynapoint SE Drills without Coolant
K222 – inch
tolerances
tolerance tolerance
d1 m7 d2 h6
>.1181 to .2362 .0002/.0006 .1875 .0000/-.0003
>.2362 to .3937 .0002/.0008 .2500 to .6875 .0000/-.0004
>.3937 to .7087 .0003/.0010 .7500 .0000/-.0005
>.7087 to .7500 .0003/.0011 — —
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
KC7215
decimal size mm new old
.1250 1/8 3,18 K222A01250 KSE01250 .1875 2.60 1.06 .843 1.44 .020 ■
.1563 5/32 3,97 K222A01563 KSE01563 .1875 2.60 1.06 .843 1.44 .025 ■
.1875 3/16 4,76 K222A01875 KSE01875 .1875 2.91 1.38 1.126 1.44 .030 ■
.2188 7/32 5,56 K222A02188 KSE02188 .2500 3.23 1.69 1.374 1.44 .035 ■
.2500 1/4, E 6,35 K222A02500 KSE02500 .2500 3.23 1.69 1.374 1.44 .040 ■
.2656 17/64 6,75 K222A02656 KSE02656 .3125 3.58 1.97 1.587 1.52 .043 ■
.2813 9/32 7,15 K222A02813 KSE02813 .3125 3.58 1.97 1.587 1.52 .045 ■
.2969 19/64 7,54 K222A02969 KSE02969 .3125 3.58 1.97 1.587 1.52 .048 ■
.3125 5/16 7,94 K222A03125 KSE03125 .3125 3.58 1.97 1.587 1.52 .050 ■
.3281 21/64 8,33 K222A03281 KSE03281 .3750 4.06 2.36 1.917 1.59 .053 ■
.3438 11/32 8,73 K222A03438 KSE03438 .3750 4.06 2.36 1.917 1.59 .056 ■
.3594 23/64 9,13 K222A03594 KSE03594 .3750 4.06 2.36 1.917 1.59 .058 ■
.3750 3/8 9,53 K222A03750 KSE03750 .3750 4.06 2.36 1.917 1.59 .061 ■
.3906 25/64 9,92 K222A03906 KSE03906 .4375 4.37 2.60 2.091 1.67 .063 ■
.4063 13/32 10,32 K222A04063 KSE04063 .4375 4.37 2.60 2.091 1.67 .066 ■
.4219 27/64 10,72 K222A04219 KSE04219 .4375 4.37 2.60 2.091 1.67 .068 ■
.4375 7/16 11,11 K222A04375 KSE04375 .4375 4.37 2.60 2.091 1.67 .071 ■
.4531 29/64 11,51 K222A04531 KSE04531 .5000 4.65 2.76 2.189 1.79 .073 ■
.4688 15/32 11,91 K222A04688 KSE04688 .5000 4.65 2.76 2.189 1.79 .076 ■
.4844 31/64 12,30 K222A04844 KSE04844 .5000 4.65 2.76 2.189 1.79 .078 ■
.5000 1/2 12,70 K222A05000 KSE05000 .5000 4.65 2.76 2.189 1.79 .081 ■
229
General-Purpose Solid Carbide Drills ®
Series CR100
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.0469 3/64 1,19 KWCD00337 40513900337 .0469 1.51 .33 .191 1.19 .014 ■
.0625 1/16 1,59 KWCD00338 40513900338 .0625 1.52 .77 .638 .75 .019 ■
.0781 5/64 1,98 KWCD00339 40513900339 .0781 1.77 .77 .647 1.00 .023 ■
.0938 3/32 2,38 KWCD00340 40513900340 .0938 2.03 .90 .781 1.13 .028 ■
.1094 7/64 2,78 KWCD00341 40513900341 .1094 2.28 1.03 .916 1.25 .033 ■
.1250 1/8 3,18 KWCD00342 40513900342 .1250 2.29 1.29 1.175 1.00 .038 ■
.1406 9/64 3,57 KWCD00343 40513900343 .1406 2.54 1.29 1.184 1.25 .042 ■
.1563 5/32 3,97 KWCD00344 40513900344 .1563 2.55 1.42 1.319 1.12 .047 ■
.1719 11/64 4,37 KWCD00345 40513900345 .1719 2.80 1.43 1.328 1.37 .052 ■
.1875 3/16 4,76 KWCD00346 40513900346 .1875 2.81 1.68 1.588 1.12 .056 ■
.2031 13/64 5,16 KWCD00347 40513900347 .2031 3.06 1.69 1.597 1.37 .061 ■
.2188 7/32 5,56 KWCD00348 40513900348 .2188 3.07 1.82 1.731 1.25 .066 ■
.2344 15/64 5,95 KWCD00349 40513900349 .2344 3.32 1.82 1.741 1.50 .070 ■
.2500 1/4 6,35 KWCD00350 40513900350 .2500 3.33 2.08 2.000 1.25 .075 ■
Grade Description
grade composition and application
K600 composition: An uncoated 10% cobalt, fine-grain carbide.
application: Ideal for general purpose drilling of all materials.
230
General-Purpose Solid Carbide Drills
Series CR100
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.0400 #60 1,02 KWCD00387 40513900387 .0400 1.51 3.01 2.874 1.50 .012 ■
.0410 #59 1,04 KWCD00388 40513900388 .0410 1.51 .76 .625 .75 .012 ■
.0420 #58 1,07 KWCD00389 40513900389 .0420 1.51 .76 .625 .75 .013 ■
.0430 #57 1,09 KWCD00390 40513900390 .0430 1.51 .76 .626 .75 .013 ■
.0465 #56 1,18 KWCD00391 40513900391 .0465 1.51 .76 .628 .75 .014 ■
.0520 #55 1,32 KWCD00392 40513900392 .0520 1.52 .77 .631 .75 .016 ■
.0550 #54 1,40 KWCD00393 40513900393 .0550 1.52 .77 .633 .75 .017 ■
.0595 #53 1,51 KWCD00394 40513900394 .0595 1.52 .77 .636 .75 .018 ■
.0635 #52 1,61 KWCD00395 40513900395 .0635 1.52 .77 .638 .75 .019 ■
.0670 #51 1,70 KWCD00396 40513900396 .0670 1.52 .77 .640 .75 .020 ■
.0700 #50 1,78 KWCD00397 40513900397 .0700 1.77 .90 .767 .87 .021 ■
.0730 #49 1,85 KWCD00398 40513900398 .0730 1.77 .90 .769 .87 .022 ■
.0760 #48 1,93 KWCD00399 40513900399 .0760 1.77 .90 .771 .87 .023 ■
.0785 #47 1,99 KWCD00400 40513900400 .0785 1.77 .90 .772 .88 .024 ■
.0810 #46 2,06 KWCD00401 40513900401 .0810 1.77 .90 .774 .87 .024 ■
.0820 #45 2,08 KWCD00402 40513900402 .0820 1.77 1.02 .899 .75 .025 ■
.0860 #44 2,18 KWCD00403 40513900403 .0860 2.03 1.03 .902 1.00 .026 ■
.0890 #43 2,26 KWCD00404 40513900404 .0890 2.03 1.03 .903 1.00 .027 ■
.0935 #42 2,37 KWCD00405 40513900405 .0935 2.03 1.03 .906 1.00 .028 ■
.0960 #41 2,44 KWCD00406 40513900406 .0960 2.03 1.03 .908 1.00 .029 ■
.0980 #40 2,49 KWCD00407 40513900407 .0980 2.03 1.03 .909 1.00 .029 ■
.0995 #39 2,53 KWCD00408 40513900408 .0995 2.28 1.28 1.160 1.00 .030 ■
.1015 #38 2,58 KWCD00409 40513900409 .1015 2.28 1.28 1.161 1.00 .030 ■
.1040 #37 2,64 KWCD00410 40513900410 .1040 2.28 1.28 1.162 1.00 .031 ■
.1065 #36 2,71 KWCD00411 40513900411 .1065 2.28 1.28 1.164 1.00 .032 ■
.1100 #35 2,79 KWCD00412 40513900412 .1100 2.28 1.28 1.166 1.00 .033 ■
.1110 #34 2,82 KWCD00413 40513900413 .1110 2.28 1.28 1.167 1.00 .033 ■
.1130 #33 2,87 KWCD00414 40513900414 .1130 2.28 1.28 1.168 1.00 .034 ■
.1160 #32 2,95 KWCD00415 40513900415 .1160 2.28 1.28 1.170 1.00 .035 ■
.1200 #31 3,05 KWCD00416 40513900416 .1200 2.29 1.29 1.172 1.00 .036 ■
231
General-Purpose Solid Carbide Drills ®
Series CR100
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.1285 #30 3,26 KWCD00417 40513900417 .1285 2.29 1.29 1.177 1.00 .039 ■
.1360 #29 3,45 KWCD00418 40513900418 .1360 2.54 1.42 1.307 1.13 .041 ■
.1405 #28 3,57 KWCD00419 40513900419 .1405 2.54 1.42 1.309 1.12 .042 ■
.1440 #27 3,66 KWCD00420 40513900420 .1440 2.54 1.42 1.312 1.13 .043 ■
.1470 #26 3,73 KWCD00421 40513900421 .1470 2.54 1.42 1.313 1.13 .044 ■
.1495 #25 3,80 KWCD00422 40513900422 .1495 2.54 1.42 1.315 1.12 .045 ■
.1520 #24 3,86 KWCD00423 40513900423 .1520 2.55 1.42 1.316 1.13 .046 ■
.1540 #23 3,91 KWCD00424 40513900424 .1540 2.55 1.42 1.318 1.13 .046 ■
.1570 #22 3,99 KWCD00425 40513900425 .1570 2.55 1.42 1.319 1.13 .047 ■
.1590 #21 4,04 KWCD00426 40513900426 .1590 2.55 1.42 1.321 1.13 .048 ■
.1610 #20 4,09 KWCD00427 40513900427 .1610 2.55 1.42 1.322 1.13 .048 ■
.1660 #19 4,22 KWCD00428 40513900428 .1660 2.80 1.67 1.575 1.13 .050 ■
.1695 #18 4,31 KWCD00429 40513900429 .1695 2.80 1.68 1.577 1.12 .051 ■
.1730 #17 4,39 KWCD00430 40513900430 .1730 2.80 1.68 1.579 1.13 .052 ■
.1770 #16 4,50 KWCD00431 40513900431 .1770 2.80 1.68 1.581 1.13 .053 ■
.1800 #15 4,57 KWCD00432 40513900432 .1800 2.80 1.68 1.583 1.13 .054 ■
.1820 #14 4,62 KWCD00433 40513900433 .1820 2.80 1.68 1.584 1.13 .055 ■
.1850 #13 4,70 KWCD00434 40513900434 .1850 2.81 1.68 1.586 1.13 .056 ■
.1890 #12 4,80 KWCD00435 40513900435 .1890 2.81 1.68 1.589 1.13 .057 ■
.1910 #11 4,85 KWCD00436 40513900436 .1910 2.81 1.68 1.590 1.13 .057 ■
.1935 #10 4,91 KWCD00437 40513900437 .1935 2.81 1.68 1.591 1.12 .058 ■
.1960 #9 4,98 KWCD00438 40513900438 .1960 3.06 1.81 1.718 1.25 .059 ■
.1990 #8 5,05 KWCD00439 40513900439 .1990 3.06 1.81 1.720 1.25 .060 ■
.2010 #7 5,11 KWCD00440 40513900440 .2010 3.06 1.81 1.721 1.25 .060 ■
.2040 #6 5,18 KWCD00441 40513900441 .2040 3.06 1.81 1.723 1.25 .061 ■
.2055 #5 5,22 KWCD00442 40513900442 .2055 3.06 1.81 1.723 1.25 .062 ■
.2090 #4 5,31 KWCD00443 40513900443 .2090 3.06 1.81 1.726 1.25 .063 ■
.2130 #3 5,41 KWCD00444 40513900444 .2130 3.06 1.81 1.728 1.25 .064 ■
.2210 #2 5,61 KWCD00445 40513900445 .2210 3.07 1.82 1.733 1.25 .066 ■
.2280 #1 5,79 KWCD00446 40513900446 .2280 3.07 1.82 1.737 1.25 .068 ■
232
General-Purpose Solid Carbide Drills
Series CH110
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.0469 3/64 1,19 KWCD00448 40513900448 .0469 1.51 .33 .191 1.19 .014 ■
.0625 1/16 1,59 KWCD00449 40513900449 .0625 1.52 .77 .638 .75 .019 ■
.0781 5/64 1,98 KWCD00450 40513900450 .0781 1.77 .77 .647 1.00 .023 ■
.0938 3/32 2,38 KWCD00451 40513900451 .0938 2.03 .90 .781 1.13 .028 ■
.1094 7/64 2,78 KWCD00452 40513900452 .1094 2.28 1.03 .916 1.25 .033 ■
.1250 1/8 3,18 KWCD00453 40513900453 .1250 2.29 1.29 1.175 1.00 .038 ■
.1406 9/64 3,57 KWCD00454 40513900454 .1406 2.54 1.29 1.184 1.25 .042 ■
.1563 5/32 3,97 KWCD00455 40513900455 .1563 2.55 1.42 1.319 1.12 .047 ■
.1719 11/64 4,37 KWCD00456 40513900456 .1719 2.80 1.43 1.328 1.37 .052 ■
.1875 3/16 4,76 KWCD00457 40513900457 .1875 2.81 1.68 1.588 1.12 .056 ■
.2031 13/64 5,16 KWCD00458 40513900458 .2031 3.06 1.69 1.597 1.37 .061 ■
.2188 7/32 5,56 KWCD00459 40513900459 .2188 3.07 1.82 1.731 1.25 .066 ■
.2344 15/64 5,95 KWCD00460 40513900460 .2344 3.32 1.82 1.741 1.50 .070 ■
.2500 1/4 6,35 KWCD00461 40513900461 .2500 3.33 2.08 2.000 1.25 .075 ■
233
General-Purpose Solid Carbide Drills ®
Series CH110
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.0400 #60 1,02 KWCD00498 40513900498 .0400 1.51 3.01 2.874 1.50 .012 ■
.0410 #59 1,04 KWCD00499 40513900499 .0410 1.51 .76 .625 .75 .012 ■
.0420 #58 1,07 KWCD00500 40513900500 .0420 1.51 .76 .625 .75 .013 ■
.0430 #57 1,09 KWCD00501 40513900501 .0430 1.51 .76 .626 .75 .013 ■
.0465 #56 1,18 KWCD00502 40513900502 .0465 1.51 .76 .628 .75 .014 ■
.0520 #55 1,32 KWCD00503 40513900503 .0520 1.52 .77 .631 .75 .016 ■
.0550 #54 1,40 KWCD00504 40513900504 .0550 1.52 .77 .633 .75 .017 ■
.0595 #53 1,51 KWCD00505 40513900505 .0595 1.52 .77 .636 .75 .018 ■
.0635 #52 1,61 KWCD00506 40513900506 .0635 1.52 .77 .638 .75 .019 ■
.0670 #51 1,70 KWCD00507 40513900507 .0670 1.52 .77 .640 .75 .020 ■
.0700 #50 1,78 KWCD00508 40513900508 .0700 1.77 .90 .767 .87 .021 ■
.0730 #49 1,85 KWCD00509 40513900509 .0730 1.77 .90 .769 .87 .022 ■
.0760 #48 1,93 KWCD00510 40513900510 .0760 1.77 .90 .771 .87 .023 ■
.0785 #47 1,99 KWCD00511 40513900511 .0785 1.77 .90 .772 .88 .024 ■
.0810 #46 2,06 KWCD00512 40513900512 .0810 1.77 .90 .774 .87 .024 ■
.0820 #45 2,08 KWCD00513 40513900513 .0820 1.77 1.02 .899 .75 .025 ■
.0860 #44 2,18 KWCD00514 40513900514 .0860 2.03 1.03 .902 1.00 .026 ■
.0890 #43 2,26 KWCD00515 40513900515 .0890 2.03 1.03 .903 1.00 .027 ■
.0935 #42 2,37 KWCD00516 40513900516 .0935 2.03 1.03 .906 1.00 .028 ■
.0960 #41 2,44 KWCD00517 40513900517 .0960 2.03 1.03 .908 1.00 .029 ■
.0980 #40 2,49 KWCD00518 40513900518 .0980 2.03 1.03 .909 1.00 .029 ■
.0995 #39 2,53 KWCD00519 40513900519 .0995 2.28 1.28 1.160 1.00 .030 ■
.1015 #38 2,58 KWCD00520 40513900520 .1015 2.28 1.28 1.161 1.00 .030 ■
.1040 #37 2,64 KWCD00521 40513900521 .1040 2.28 1.28 1.162 1.00 .031 ■
.1065 #36 2,71 KWCD00522 40513900522 .1065 2.28 1.28 1.164 1.00 .032 ■
.1100 #35 2,79 KWCD00523 40513900523 .1100 2.28 1.28 1.166 1.00 .033 ■
.1110 #34 2,82 KWCD00524 40513900524 .1110 2.28 1.28 1.167 1.00 .033 ■
.1130 #33 2,87 KWCD00525 40513900525 .1130 2.28 1.28 1.168 1.00 .034 ■
.1160 #32 2,95 KWCD00526 40513900526 .1160 2.28 1.28 1.170 1.00 .035 ■
.1200 #31 3,05 KWCD00527 40513900527 .1200 2.29 1.29 1.172 1.00 .036 ■
234
General-Purpose Solid Carbide Drills
Series CH110
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.1285 #30 3,26 KWCD00528 40513900528 .1285 2.29 1.29 1.177 1.00 .039 ■
.1360 #29 3,45 KWCD00529 40513900529 .1360 2.54 1.42 1.307 1.13 .041 ■
.1405 #28 3,57 KWCD00530 40513900530 .1405 2.54 1.42 1.309 1.12 .042 ■
.1440 #27 3,66 KWCD00531 40513900531 .1440 2.54 1.42 1.312 1.13 .043 ■
.1470 #26 3,73 KWCD00532 40513900532 .1470 2.54 1.42 1.313 1.13 .044 ■
.1495 #25 3,80 KWCD00533 40513900533 .1495 2.54 1.42 1.315 1.12 .045 ■
.1520 #24 3,86 KWCD00534 40513900534 .1520 2.55 1.42 1.316 1.13 .046 ■
.1540 #23 3,91 KWCD00535 40513900535 .1540 2.55 1.42 1.318 1.13 .046 ■
.1570 #22 3,99 KWCD00536 40513900536 .1570 2.55 1.42 1.319 1.13 .047 ■
.1590 #21 4,04 KWCD00537 40513900537 .1590 2.55 1.42 1.321 1.13 .048 ■
.1610 #20 4,09 KWCD00538 40513900538 .1610 2.55 1.42 1.322 1.13 .048 ■
.1660 #19 4,22 KWCD00539 40513900539 .1660 2.80 1.67 1.575 1.13 .050 ■
.1695 #18 4,31 KWCD00540 40513900540 .1695 2.80 1.68 1.577 1.12 .051 ■
.1730 #17 4,39 KWCD00541 40513900541 .1730 2.80 1.68 1.579 1.13 .052 ■
.1770 #16 4,50 KWCD00542 40513900542 .1770 2.80 1.68 1.581 1.13 .053 ■
.1800 #15 4,57 KWCD00543 40513900543 .1800 2.80 1.68 1.583 1.13 .054 ■
.1820 #14 4,62 KWCD00544 40513900544 .1820 2.80 1.68 1.584 1.13 .055 ■
.1850 #13 4,70 KWCD00545 40513900545 .1850 2.81 1.68 1.586 1.13 .056 ■
.1890 #12 4,80 KWCD00546 40513900546 .1890 2.81 1.68 1.589 1.13 .057 ■
.1910 #11 4,85 KWCD00547 40513900547 .1910 2.81 1.68 1.590 1.13 .057 ■
.1935 #10 4,91 KWCD00548 40513900548 .1935 2.81 1.68 1.591 1.12 .058 ■
.1960 #9 4,98 KWCD00549 40513900549 .1960 3.06 1.81 1.718 1.25 .059 ■
.1990 #8 5,05 KWCD00550 40513900550 .1990 3.06 1.81 1.720 1.25 .060 ■
.2010 #7 5,11 KWCD00551 40513900551 .2010 3.06 1.81 1.721 1.25 .060 ■
.2040 #6 5,18 KWCD00552 40513900552 .2040 3.06 1.81 1.723 1.25 .061 ■
.2055 #5 5,22 KWCD00553 40513900553 .2055 3.06 1.81 1.723 1.25 .062 ■
.2090 #4 5,31 KWCD00554 40513900554 .2090 3.06 1.81 1.726 1.25 .063 ■
.2130 #3 5,41 KWCD00555 40513900555 .2130 3.06 1.81 1.728 1.25 .064 ■
.2210 #2 5,61 KWCD00556 40513900556 .2210 3.07 1.82 1.733 1.25 .066 ■
.2280 #1 5,79 KWCD00557 40513900557 .2280 3.07 1.82 1.737 1.25 .068 ■
235
General-Purpose Solid Carbide Drills ®
Series CS120
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
fractional drills
.0469 3/64 1,19 KWCD00558 40513900558 .0469 1.50 .50 .103 1.00 .010 ■
.0625 1/16 1,59 KWCD00559 40513900559 .0625 1.50 .63 .138 .88 .013 ■
.0781 5/64 1,98 KWCD00560 40513900560 .0781 1.69 .69 .172 1.00 .016 ■
.0938 3/32 2,38 KWCD00561 40513900561 .0938 1.75 .75 .207 1.00 .019 ■
.1094 7/64 2,78 KWCD00562 40513900562 .1094 1.81 .81 .241 1.00 .023 ■
.1250 1/8 3,18 KWCD00563 40513900563 .1250 1.88 .88 .276 1.00 .026 ■
.1406 9/64 3,57 KWCD00564 40513900564 .1406 1.94 .94 .310 1.00 .029 ■
.1563 5/32 3,97 KWCD00565 40513900565 .1563 2.06 1.00 .345 1.06 .032 ■
.1719 11/64 4,37 KWCD00566 40513900566 .1719 2.13 1.06 .379 1.06 .036 ■
.1875 3/16 4,76 KWCD00567 40513900567 .1875 2.19 1.13 .414 1.06 .039 ■
.2031 13/64 5,16 KWCD00568 40513900568 .2031 2.25 1.19 .448 1.06 .042 ■
.2188 7/32 5,56 KWCD00569 40513900569 .2188 2.38 1.25 .483 1.13 .045 ■
.2344 15/64 5,95 KWCD00570 40513900570 .2344 2.44 1.31 .517 1.13 .049 ■
.2500 1/4 6,35 KWCD00571 40513900571 .2500 2.50 1.38 .552 1.13 .052 ■
number drills
.0400 #60 1,02 KWCD00588 40513900588 .0400 1.50 .50 .088 1.00 .008 ■
.0410 #59 1,04 KWCD00589 40513900589 .0410 1.50 .50 .090 1.00 .008 ■
.0420 #58 1,07 KWCD00590 40513900590 .0420 1.50 .50 .093 1.00 .009 ■
.0430 #57 1,09 KWCD00591 40513900591 .0430 1.50 .50 .095 1.00 .009 ■
.0465 #56 1,18 KWCD00592 40513900592 .0465 1.50 .50 .103 1.00 .010 ■
.0520 #55 1,32 KWCD00593 40513900593 .0520 1.50 .50 .115 1.00 .011 ■
.0550 #54 1,40 KWCD00594 40513900594 .0550 1.50 .50 .121 1.00 .011 ■
.0595 #53 1,51 KWCD00595 40513900595 .0595 1.50 .50 .131 1.00 .012 ■
.0635 #52 1,61 KWCD00596 40513900596 .0635 1.69 .69 .140 1.00 .013 ■
.0670 #51 1,70 KWCD00597 40513900597 .0670 1.69 .69 .148 1.00 .014 ■
.0700 #50 1,78 KWCD00598 40513900598 .0700 1.69 .69 .154 1.00 .014 ■
.0730 #49 1,85 KWCD00599 40513900599 .0730 1.69 .69 .161 1.00 .015 ■
.0760 #48 1,93 KWCD00600 40513900600 .0760 1.69 .69 .168 1.00 .016 ■
.0785 #47 1,99 KWCD00601 40513900601 .0785 1.75 .75 .173 1.00 .016 ■
.0810 #46 2,06 KWCD00602 40513900602 .0810 1.75 .75 .179 1.00 .017 ■
.0820 #45 2,08 KWCD00603 40513900603 .0820 1.75 .75 .181 1.00 .017 ■
.0860 #44 2,18 KWCD00604 40513900604 .0860 1.75 .75 .190 1.00 .018 ■
.0890 #43 2,26 KWCD00605 40513900605 .0890 1.75 .75 .196 1.00 .018 ■
.0935 #42 2,37 KWCD00606 40513900606 .0935 1.75 .75 .206 1.00 .019 ■
.0960 #41 2,44 KWCD00607 40513900607 .0960 1.81 .81 .212 1.00 .020 ■
.0980 #40 2,49 KWCD00608 40513900608 .0980 1.81 .81 .216 1.00 .020 ■
.0995 #39 2,53 KWCD00609 40513900609 .0995 1.81 .81 .220 1.00 .021 ■
.1015 #38 2,58 KWCD00610 40513900610 .1015 1.81 .81 .224 1.00 .021 ■
.1040 #37 2,64 KWCD00611 40513900611 .1040 1.81 .81 .230 1.00 .022 ■
.1065 #36 2,71 KWCD00612 40513900612 .1065 1.81 .81 .235 1.00 .022 ■
.1100 #35 2,79 KWCD00613 40513900613 .1100 1.88 .88 .243 1.00 .023 ■
.1110 #34 2,82 KWCD00614 40513900614 .1110 1.88 .88 .245 1.00 .023 ■
.1130 #33 2,87 KWCD00615 40513900615 .1130 1.88 .88 .249 1.00 .023 ■
.1160 #32 2,95 KWCD00616 40513900616 .1160 1.88 .88 .256 1.00 .024 ■
.1200 #31 3,05 KWCD00617 40513900617 .1200 1.88 .88 .265 1.00 .025 ■
236
General-Purpose Solid Carbide Drills
Series CS120
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.1285 #30 3,26 KWCD00618 40513900618 .1285 1.94 .94 .284 1.00 .027 ■
.1360 #29 3,45 KWCD00619 40513900619 .1360 1.94 .94 .300 1.00 .028 ■
.1405 #28 3,57 KWCD00620 40513900620 .1405 1.94 .94 .310 1.00 .029 ■
.1440 #27 3,66 KWCD00621 40513900621 .1440 2.06 1.00 .318 1.06 .030 ■
.1470 #26 3,73 KWCD00622 40513900622 .1470 2.06 1.00 .324 1.06 .030 ■
.1495 #25 3,80 KWCD00623 40513900623 .1495 2.06 1.00 .330 1.06 .031 ■
.1520 #24 3,86 KWCD00624 40513900624 .1520 2.06 1.00 .335 1.06 .031 ■
.1540 #23 3,91 KWCD00625 40513900625 .1540 2.06 1.00 .340 1.06 .032 ■
.1570 #22 3,99 KWCD00626 40513900626 .1570 2.13 1.06 .347 1.06 .033 ■
.1590 #21 4,04 KWCD00627 40513900627 .1590 2.13 1.06 .351 1.06 .033 ■
.1610 #20 4,09 KWCD00628 40513900628 .1610 2.13 1.06 .355 1.06 .033 ■
.1660 #19 4,22 KWCD00629 40513900629 .1660 2.13 1.06 .366 1.06 .034 ■
.1695 #18 4,31 KWCD00630 40513900630 .1695 2.13 1.06 .374 1.06 .035 ■
.1730 #17 4,39 KWCD00631 40513900631 .1730 2.19 1.13 .382 1.06 .036 ■
.1770 #16 4,50 KWCD00632 40513900632 .1770 2.19 1.13 .391 1.06 .037 ■
.1800 #15 4,57 KWCD00633 40513900633 .1800 2.19 1.13 .397 1.06 .037 ■
.1820 #14 4,62 KWCD00634 40513900634 .1820 2.19 1.13 .402 1.06 .038 ■
.1850 #13 4,70 KWCD00635 40513900635 .1850 2.19 1.13 .408 1.06 .038 ■
.1890 #12 4,80 KWCD00636 40513900636 .1890 2.19 1.13 .417 1.06 .039 ■
.1910 #11 4,85 KWCD00637 40513900637 .1910 2.19 1.13 .422 1.06 .040 ■
.1935 #10 4,91 KWCD00638 40513900638 .1935 2.19 1.13 .427 1.06 .040 ■
.1960 #9 4,98 KWCD00639 40513900639 .1960 2.25 1.19 .433 1.06 .041 ■
.1990 #8 5,05 KWCD00640 40513900640 .1990 2.25 1.19 .439 1.06 .041 ■
.2010 #7 5,11 KWCD00641 40513900641 .2010 2.25 1.19 .444 1.06 .042 ■
.2040 #6 5,18 KWCD00642 40513900642 .2040 2.38 1.25 .450 1.13 .042 ■
.2055 #5 5,22 KWCD00643 40513900643 .2055 2.38 1.25 .454 1.13 .043 ■
.2090 #4 5,31 KWCD00644 40513900644 .2090 2.38 1.25 .461 1.13 .043 ■
.2130 #3 5,41 KWCD00645 40513900645 .2130 2.38 1.25 .470 1.13 .044 ■
.2210 #2 5,61 KWCD00646 40513900646 .2210 2.44 1.31 .488 1.13 .046 ■
.2280 #1 5,79 KWCD00647 40513900647 .2280 2.44 1.31 .503 1.13 .047 ■
237
General-Purpose Solid Carbide Drills ®
Series CN130
d1 catalog number
grade
d2 l1 l2 l3 l4 l5
K600
decimal size mm new old
.0313 1/32 0,79 KWCD00648 40513900648 .0313 1.25 .19 .063 1.06 .009 ■
.0625 1/16 1,59 KWCD00649 40513900649 .0625 1.50 .31 .125 1.19 .019 ■
.0938 3/32 2,38 KWCD00650 40513900650 .0938 1.50 .38 .188 1.13 .028 ■
.1250 1/8 3,18 KWCD00651 40513900651 .1250 1.50 .44 .250 1.06 .038 ■
.1563 5/32 3,97 KWCD00652 40513900652 .1563 2.00 .47 .313 1.53 .047 ■
.1875 3/16 4,76 KWCD00653 40513900653 .1875 2.00 .56 .375 1.44 .056 ■
.2188 7/32 5,56 KWCD00654 40513900654 .2188 2.00 .59 .438 1.41 .066 ■
.2500 1/4 6,35 KWCD00655 40513900655 .2500 2.00 .69 .500 1.31 .075 ■
.3125 5/16 7,94 KWCD00657 40513900657 .3125 2.50 .88 .625 1.63 .094 ■
.3438 11/32 8,73 KWCD00658 40513900658 .3438 2.50 .94 .688 .156 .103 ■
.3750 3/8 9,53 KWCD00659 40513900659 .3750 2.50 1.00 .750 1.50 .113 ■
.4375 7/16 11,11 KWCD00661 40513900661 .4375 2.50 1.06 .875 1.44 .131 ■
.5000 1/2 12,70 KWCD00663 40513900663 .5000 2.50 1.13 1.000 1.38 .150 ■
d1
grade
catalog number d2 l1 l2 l3 l4 l5
K600
decimal size mm
.0469 3/64 1,19 CDC094DS1 .1250 1.50 .38 .075 1.13 .028 ■
.0781 5/64 1,98 CDC078DS1 .1875 2.00 .50 .106 1.50 .047 ■
.1094 7/64 2,78 CDC109DS1 .2500 2.00 .69 .138 1.31 .066 ■
.1250 1/8 3,18 CDC125DS1 .3125 2.13 .75 .153 1.38 .075 ■
.1875 3/16 4,76 CDC188DS1 .4375 2.75 1.00 .216 1.75 .113 ■
.2188 7/32 5,56 CDC218DS1 .5000 3.00 1.06 .247 1.94 .131 ■
238
High-Performance Taps
page
K-SS . . . . . . . . . . . . . . . . . . . . . . . 240-245
K-SS spiral point plug . . . . . . . . . . . . . . . . . . 240
K-SS spiral flute, modified bottom . . . . . . . . . 242
K-SS spiral flute, full bottom . . . . . . . . . . . . . . . 244
K-SS spiral flute pipe . . . . . . . . . . . . . . . . . . . . . . 245
K-NI 246-248
K-NI spiral point plug . . . . . . . . . . . . . . . . . . . . . . . . . 246
K-NI spiral flute, modified bottom . . . . . . . . . . . . . . . 247
K-NI spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . . 248
K-TI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255-257
K-TI LHS/RHC spiral flute plug. . . . . . . . . . . . . . . . . . . . . . . 255
K-TI RH spiral flute, modified bottom . . . . . . . . . . . . . . . . . 256
K-TI RH spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . . . 257
Need technical
assistance?
Call our
Tech Hotline!
800/835-3668
239
High-Performance Taps ®
240
High-Performance Taps
K-SS Spiral Point Plug
Machine Screw and Fractional Sizes
#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)
• high-vanadium premium steel Recommended Applications:
• TiN coated - low-carbon steels (<0.3% C) (<275 HB)
• for through-hole tapping - plain-carbon, alloy, and tool steels (<275 HB) (<29 HRC)
• plug chamfer: 4-5 pitches - ferritic, martensitic, and PH stainless steels
• neck design for CNC equipment (<275 HB) (<29 HRC)
• suitable for UNJ aerospace internal threading applications - austenitic stainless steels (135-275 HB) (<28 HRC)
For more technical information, see pages 680-702 of Holemaking
Catalog 0070 (A00-2).
241
High-Performance Taps ®
242
High-Performance Taps
K-SS Spiral Flute, Modified Bottom
Machine Screw and Fractional Sizes
#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
243
High-Performance Taps ®
244
High-Performance Taps
K-SS Spiral Flute Pipe
Fractional Sizes
1/16" to 1/4" (12 per package) • 3/8" (6 per package)
UIC #
nominal size threads per inch number of flutes length of thread overall length
NPT NPTF
UIC #
nominal size threads per inch number of flutes length of thread overall length
NPT NPTF
tap size and pitch number of flutes *pitch diameter limit UIC #
length of thread length of neck overall length
(mm)
246
High-Performance Taps
K-NI Spiral Flute, Modified Bottom
Metric Sizes
M2,5 to M6 (12 per package)
tap size and pitch number of flutes *pitch diameter limit UIC #
length of thread length of neck overall length
(mm)
247
High-Performance Taps ®
threads per
inch UIC #
number length length pitch diameter limits
tap of overall
NC NF of of
size length
UNC UNF flutes thread neck
H2 H3 H4 H5
UNJC UNJF
4 40 — 3 .236 .326 1 7/8 40510200359 40510200362 — 40510200365
4 — 48 3 .236 .326 1 7/8 40510200367 — — —
5 40 — 3 .236 .389 1 15/16 40510200369 — — —
6 32 — 3 .276 .411 2 40510200371 40510200373 — 40510200375
6 — 40 3 .276 .411 2 40510200378 — — —
8 32 — 3 .276 .474 2 1/8 40510200380 40510200382 — 40510200385
10 24 — 3 .354 .521 2 3/8 — 40510200389 — 40510200392
10 — 32 3 .276 .599 2 3/8 — 40510200396 — 40510200399
1/4 20 — 3 .433 .567 2 1/2 — 40510200403 — 40510200405
1/4 — 28 3 .354 .646 2 1/2 — 40510200408 40510200410 40510200412
5/16 18 — 3 .472 .653 2 23/32 — 40510200416 — 40510200418
5/16 — 24 3 .394 .731 2 23/32 — 40510200421 40510200423 40510200425
3/8 16 — 3 .551 .699 2 15/16 — 40510200429 — 40510200431
3/8 — 24 3 .394 .856 2 15/16 — 40510200434 40510200436 40510200438
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
248
High-Performance Taps
K-NI STI Spiral Point Plug
Machine Screw and Fractional Sizes for Screw Thread Inserts
#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)
threads per
inch UIC #
number length length pitch diameter limits
tap of overall
NC NF of of
size length
UNC UNF flutes thread neck
H1 H2 H3 H4 H5
UNJC UNJF
4 40 — 2 .413 .274 2 40510200466 40510200467 40510200468 — —
6 32 — 3 .531 .344 2 3/8 — 40510200469 40510200470 — 40510200471
8 32 — 3 .571 .366 2 3/8 — 40510200472 40510200473 — 40510200474
10 24 — 3 .591 .409 2 1/2 — 40510200475 40510200476 — 40510200477
10 — 32 3 .591 .409 2 1/2 — 40510200478 40510200479 — 40510200480
1/4 20 — 3 .669 .456 2 23/32 — 40510200481 40510200482 — 40510200483
1/4 — 28 3 .669 .456 2 23/32 — 40510200484 40510200485 — 40510200486
5/16 18 — 3 .748 .502 2 15/16 — — 40510200487 40510200488 40510200489
5/16 — 24 3 .748 .502 2 15/16 — 40510200490 40510200491 — 40510200492
3/8 16 — 3 .984 — 3 3/8 — — 40510200493 40510200494 40510200495
3/8 — 24 3 .866 — 3 5/32 — 40510200496 40510200497 — 40510200498
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
249
High-Performance Taps ®
threads per
inch UIC #
number length length pitch diameter limits
tap of of of overall
NC NF
size flutes thread length
UNC UNF neck
H1 H2 H3 H4 H5
UNJC UNJF
4 40 — 2 .276 .411 2 40510200507 40510200508 40510200510 — —
6 32 — 3 .354 .521 2 3/8 — 40510200512 40510200514 — 40510200516
8 32 — 3 .354 .583 2 3/8 — 40510200518 40510200520 — 40510200522
10 24 — 3 .433 .567 2 1/2 — 40510200524 40510200526 — 40510200528
10 — 32 3 .354 .646 2 1/2 — 40510200530 40510200531 — 40510200533
1/4 20 — 3 .472 .653 2 23/32 — 40510200535 40510200536 — 40510200538
1/4 — 28 3 .394 .731 2 23/32 — 40510200540 40510200541 — 40510200543
5/16 18 — 3 .551 .699 2 15/16 — — 40510200545 40510200547 40510200548
5/16 — 24 3 .394 .856 2 15/16 — 40510200550 40510200551 — 40510200553
3/8 16 — 3 .630 1.417 3 3/8 — — 40510200555 40510200557 40510200558
3/8 — 24 3 .472 1.378 3 5/32 — 40510200560 40510200561 — 40510200563
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
250
High-Performance Taps
K-NI STI Spiral Flute, Full Bottom
Machine Screw and Fractional Sizes for Screw Thread Inserts
#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)
threads per
inch UIC #
number length length pitch diameter limits
tap of of of overall
NC NF
size flutes thread length
UNC UNF neck
H1 H2 H3 H4 H5
UNJC UNJF
4 40 — 2 .276 .411 2 — 40510200509 40510200511 — —
6 32 — 3 .354 .521 2 3/8 — 40510200513 40510200515 — 40510200517
8 32 — 3 .354 .583 2 3/8 — 40510200519 40510200521 — 40510200523
10 24 — 3 .433 .567 2 1/2 — 40510200525 40510200527 — 40510200529
10 — 32 3 .354 .646 2 1/2 — — 40510200532 — 40510200534
1/4 20 — 3 .472 .653 2 23/32 — — 40510200537 — 40510200539
1/4 — 28 3 .394 .731 2 23/32 — — 40510200542 — 40510200544
5/16 18 — 3 .551 .699 2 15/16 — — 40510200546 — 40510200549
5/16 — 24 3 .394 .856 2 15/16 — — 40510200552 — 40510200554
3/8 16 — 3 .630 1.417 3 3/8 — — 40510200556 — 40510200559
3/8 — 24 3 .472 1.378 3 5/32 — — 40510200562 — 40510200564
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
251
High-Performance Taps ®
252
High-Performance Taps
K-AA Straight Flute Plug
Metric Sizes
M3 to M6 (12 per package)
tap size and pitch number of flutes *pitch diameter limit length of thread overall length UIC #
(mm)
253
High-Performance Taps ®
tap size and pitch number of flutes *pitch diameter limit length of thread overall length UIC #
(mm)
254
High-Performance Taps
K-TI LHS/RHC Spiral Flute Plug
Metric Sizes
M2,5 to M6 (12 per package)
tap size and pitch number of flutes *pitch diameter limit length of thread UIC #
length of neck overall length
(mm)
threads per
inch UIC #
number length length pitch diameter limits
tap overall
NC NF of of of
size length
UNC UNF flutes thread neck
H2 H3 H4 H5
UNJC UNJF
4 40 — 3 .335 .227 1 7/8 40510200581 — — —
5 40 — 3 .374 .251 1 15/16 40510200582 — — —
6 32 — 3 .413 .274 2 — 40510200583 — 40510200584
8 32 — 3 .453 .297 2 1/8 — 40510200585 — 40510200586
10 24 — 3 .531 .344 2 3/8 — 40510200587 — 40510200588
10 — 32 3 .531 .344 2 3/8 — 40510200589 — 40510200590
1/4 20 — 3 .591 .409 2 1/2 — 40510200591 — 40510200592
1/4 — 28 3 .591 .409 2 1/2 — 40510200593 — 40510200594
5/16 18 — 3 .669 .456 2 23/32 — 40510200595 — 40510200596
5/16 — 24 3 .669 .456 2 23/32 — 40510200597 — 40510200598
3/8 16 — 3 .748 .502 2 15/16 — 40510200599 — 40510200600
3/8 — 24 3 .748 .502 2 15/16 — 40510200601 — 40510200602
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
255
High-Performance Taps ®
tap size and pitch number of flutes *pitch diameter limit length of thread UIC #
length of neck overall length
(mm)
threads per
inch UIC #
number length length pitch diameter limits
tap overall
NC NF of of of
size length
UNC UNF flutes thread neck
H2 H3 H4 H5
UNJC UNJF
4 40 — 3 .236 .326 1 7/8 40510200611 — 40510200613 —
5 40 — 3 .236 .389 1 15/16 — 40510200614 — —
6 32 — 3 .276 .411 2 — 40510200615 — 40510200617
8 32 — 3 .276 .474 2 1/8 — 40510200618 — 40510200620
10 24 — 3 .354 .521 2 3/8 — 40510200621 — —
10 — 32 3 .276 .599 2 3/8 — 40510200623 — 40510200625
1/4 20 — 3 .433 .567 2 1/2 — 40510200626 — 40510200628
1/4 — 28 3 .354 .646 2 1/2 — 40510200630 — 40510200633
5/16 18 — 3 .472 .653 2 23/32 — 40510200634 — 40510200636
5/16 — 24 3 .394 .731 2 23/32 — 40510200638 — 40510200640
3/8 16 — 3 .551 .699 2 15/16 — 40510200641 — 40510200643
3/8 — 24 3 .394 .856 2 15/16 — 40510200645 — 40510200647
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
256
High-Performance Taps
K-TI RHS Spiral Flute, Full Bottom
Machine Screw and Fractional Sizes
#4 to 1/4" (12 per package) • 5/16" to 3/8" (6 per package)
threads per
inch UIC #
number length length pitch diameter limits
tap overall
NC NF of of of
size length
UNC UNF flutes thread neck
H2 H3 H4 H5
UNJC UNJF
4 40 — 3 .236 .326 1 7/8 — — 40510200612 —
5 40 — 3 .236 .389 1 15/16 — — — —
6 32 — 3 .276 .411 2 — 40510200616 — 40510200617
8 32 — 3 .276 .474 2 1/8 — 40510200619 — —
10 24 — 3 .354 .521 2 3/8 — 40510200622 — —
10 — 32 3 .276 .599 2 3/8 — 40510200624 — 40510200625
1/4 20 — 3 .433 .567 2 1/2 — 40510200627 — 40510200629
1/4 — 28 3 .354 .646 2 1/2 — 40510200631 — —
5/16 18 — 3 .472 .653 2 23/32 — 40510200635 — 40510200637
5/16 — 24 3 .394 .731 2 23/32 — 40510200639 — —
3/8 16 — 3 .551 .699 2 15/16 — 40510200642 — 40510200644
3/8 — 24 3 .394 .856 2 15/16 — 40510200646 — —
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
257
High-Performance Taps ®
sizes decimal inches sizes decimal inches sizes decimal inches sizes decimal inches sizes decimal inches
258
End Mills
page
Application Information . . . . . . . . . . . . . . 260
259
Application Information ®
Starting Feed and Speed Guidelines for Uncoated and TiN — Solid Carbide End Mills
cutter diameter and feed rates — chip load per tooth (ipt)
cutter speed
workpiece material grade
style (sfm) 1/16 1/8 1/4 3/8
tool steel 42-50 HRC HEC KC610M 150-250 .0001 .0002 .0005 .00075
tool steel annealed BNEC 175-275 .0005 .0006 .0015 .00175
P20 steel SLEC 275-500 .0005 .0006 .001 .002
die steel 32-42 HRC 125-200 .0002 .0005 .0015 .00175
low carbon steels annealed HEC KC610M 250-400 .0004 .0005 .001 .002
medium carbon steels BNEC 125-300 .0005 .0006 .0015 .00175
SLEC
stainless steel 400 series CHEC KC610M 400-500 .0005 .0008 .001 .0015
stainless steel 300 series BNEC 300-400 .0005 .0008 .001 .0015
SLEC
cast iron 120-220 BHN HEC K600 250-600 .0005 .001 .002 .0025
cast iron 220-320 BHN BNEC 100-300 .0002 .0004 .0008 .0014
ductile iron SLEC 100-400 .0003 .0005 .001 .0015
malleable iron 250-500 .0003 .0005 .001 .002
aluminum HHSEC K600 1000+ .0005 .001 .002 .003
high silicon aluminum 500-900 .0005 .001 .002 .003
brass, bronze and copper alloys 400-800 .0005 .001 .002 .0025
magnesium 900+ .0005 .001 .002 .003
plastics 1000+ .001 .0015 .003 .0045
Starting Feed and Speed Guidelines for TiAlN — Solid Carbide End Mills
cutter diameter and feed rates — chip load per tooth (ipt)
cutter speed
workpiece material grade
style (sfm) 1/16 1/8 1/4 3/8
tool steel 42-50 HRC HEC KC635M 200-325 .0001 .0002 .0005 .00075
tool steel annealed BNEC KC631M 225-350 .0005 .0006 .0015 .00175
P20 steel SLEC KC633M 380-650 .0005 .0006 .001 .002
die steel 32-42 HRC 160-260 .0002 .0005 .0015 .00175
die steel 52-60 HRC 70-120 .0002 .0004 .0005 .00075
low carbon steels annealed HEC KC635M 325-520 .0004 .0005 .001 .002
medium carbon steels BNEC KC631M 215-390 .0005 .0006 .0015 .00175
hardened steels 48-52 HRC, SLEC KC633M 70-130 .0001 .0002 .0005 .00075
(1045, forge steel)
stainless steel 400 series HEC KC635M 325-650 .0005 .0008 .001 .0015
stainless steel 300 series BNEC KC631M 350-520 .0005 .0008 .001 .0015
SLEC KC633M
cast iron 120-220 BHN HEC KC635M 425-780 .0005 .001 .002 .0025
cast iron 220-320 BHN BNEC KC631M 200-390 .0002 .0004 .0008 .0014
ductile iron SLEC KC633M 250-520 .0003 .0005 .001 .0015
malleable iron 375-650 .0003 .0005 .001 .002
aluminum HHSEC KC635M 1000+ .0005 .001 .002 .003
high silicon aluminum KC631M 700-1170 .0005 .001 .002 .003
brass, bronze and copper alloys KC633M 600-1050 .0005 .001 .002 .0025
magnesium 900+ .0005 .001 .002 .003
plastics 1000+ .001 .0015 .003 .0045
titanium alloys HEC KC635M 125-200 .0002 .0003 .0005 .00075
high-temp. alloys (nickel base) BNEC KC631M 65-130 .0002 .0004 .0008 .0009
Monel high nickel steels SLEC KC633M 225-325 .0003 .0005 .001 .0015
260
High-Performance Solid Carbide End Mills
High Shear – Specifically Designed for Non-Ferrous Applications
right-hand spiral/right-hand cutting/center cutting
2 flute 4 flute
KC635M
KC610M
KC635M
K600
K600
catalog number catalog number
d1 d2 l1 l2 l3
2 flute 4 flute
KC610M
K600
K600
261
High-Performance Solid Carbide End Mills ®
General Purpose
30° right-hand spiral/right-hand cutting/center cutting/square end
KC635M
KC610M
KC610M
KC635M
K600
K600
K600
catalog catalog catalog
number number number d1 d2 l1 l2 l3
262
High-Performance Solid Carbide End Mills
Double End
general purpose/right-hand cutting/right-hand spiral/center cutting
2 flute 4 flute
end mill dimensions
KC610M
KC635M
KC610M
KC635M
K600
K600
catalog number catalog number
d1 d2 l1 l2 l3
263
High-Performance Solid Carbide End Mills ®
Corner Radius
right-hand spiral/right-hand cutting/center cutting
4 flute
KC610M
KC635M
K600
catalog number corner d1 d2 l1 l2 l3
radius
264
High-Performance Solid Carbide End Mills
Ball-Nose
30° right-hand spiral/right-hand cutting/center cutting
2 flute 4 flute
KC635M
KC610M
KC635M
K600
K600
catalog number catalog number
d1 d2 l1 l2 l3
265
High-Performance Solid Carbide End Mills ®
4 flute
end mill dimensions
KC610M
KC635M
catalog number K600
d1 d2 l1 l2 l3
266
Metric High-Performance Solid Carbide End Mills
High Shear — Specially Designed for Non-Ferrous Applications
DIN 6527L, 45° Helix Angle
2 flute
end mill dimensions
KC631M
K600
catalog number
d1 d2 l1 l2 l3
F2AA0400ADL45 4 6 57 8 36
F2AA0500ADL45 5 6 57 10 36
F2AA0600ADL45 6 6 57 10 36
F2AA0800ADL45 8 8 63 16 36
F2AA1000ADL45 10 10 72 19 40
3 flute
end mill dimensions
KC631M
K600
catalog number
d1 d2 l1 l2 l3
F3AA0300AWS45 3 3 38 12 24
F3AA0400AWS45 4 4 50 12 35
F3AA0500AWS45 5 6 50 14 33
F3AA0600AWS45 6 6 50 16 30
F3AA0800AWM45 8 8 63 20 38
F3AA1000AWL45 10 10 76 22 46
267
Metric High-Performance Solid Carbide End Mills ®
General Purpose
DIN 6527L, 30° Helix Angle
KC625M
KC625M
K600
K600
K600
catalog catalog catalog l2
number number number l2
d1 d2 l1 2 and 3 l3
4 flute
flute
F2AH0250ADL30 — — 2,50 6 57 7 — 39
F2AH0300ADL30 — — 3,00 6 57 7 — 39
F2AH0400ADL30 F3AH0400ADL30 F4AJ0400ADL30 4,00 6 57 8 11 38
F2AH0450ADL30 F3AH0450ADL30 F4AJ0450ADL30 4,50 6 57 8 11 38
— F3AH0480ADL30 — 4,80 6 57 10 — 38
F2AH0500ADL30 F3AH0500ADL30 F4AJ0500ADL30 5,00 6 57 10 13 37
F2AH0550ADL30 F3AH0550ADL30 — 5,50 6 57 10 — 37
— F3AH0575ADL30 — 5,75 6 57 10 — 37
F2AH0600ADL30 F3AH0600ADL30 F4AJ0600ADL30 6,00 6 57 10 13 36
— F3AH0650ADL30 — 6,50 8 63 13 — 36
— F3AH0675ADL30 — 6,75 8 63 13 — 36
F2AH0700ADL30 F3AH0700ADL30 F4AJ0700ADL30 7,00 8 63 13 16 36
— F3AH0775ADL30 — 7,75 8 63 16 — 36
F2AH0800ADL30 F3AH0800ADL30 F4AJ0800ADL30 8,00 8 63 16 19 36
— F3AH0850ADL30 — 8,50 10 72 16 — 40
— F3AH0870ADL30 — 8,70 10 72 16 — 40
F2AH0900ADL30 F3AH0900ADL30 F4AJ0900ADL30 9,00 10 72 16 19 40
— F3AH0970ADL30 — 9,70 10 72 19 — 40
F2AH1000ADL30 F3AH1000ADL30 F4AJ1000ADL30 10,00 10 72 19 22 40
268
Metric High-Performance Solid Carbide End Mills
Ball Nose and Radiused End Mills
DIN 6528 and DIN 6527L, 30° Helix Angle
2 flute 4 flute
KC633M
K600
K600
catalog number catalog number l2 l2
d1 d2 l1 l3
2 flute 4 flute
F2AL0200ADL30 — 2 6 57 6 — 36
F2AL0300ADL30 F4AL0300ADL30 3 6 57 7 7 36
F2AL0400ADL30 F4AL0400ADL30 4 6 57 8 8 36
F2AL0500ADL30 F4AL0500ADL30 5 6 57 10 11 36
F2AL0600ADL30 F4AL0600ADL30 6 6 57 10 13 36
F2AL0800ADL30 F4AL0800ADL30 8 8 63 16 19 36
F2AL1000ADL30 F4AL1000ADL30 10 10 72 19 22 40
269
Toolholding Systems
DA Collets
• Kennametal Double Angle (DA) collet
system provides true gripping on cutting
margins of drills for greater feeds and
speeds. DA collets allow shorter projection
lengths for improved accuracy.
• Range of collapse is 1/32 (0,8 mm).
• Use these collets mainly for drilling
applications.
TG Collets
• Tremendous Grip (TG) single angle
collet system provides additional
grip with better concentricity.
• Range of collapse is 1/64 (0,4 mm).
• Use these collets in drilling, milling (TGNP),
and tapping (TGST) operations.
ER Collets
• ER collets (DIN 6499) offer flexibility
when drilling, light milling, or tapping
with or without the use of coolant.
• Three different styles of locknuts
are available.
• Range of collapse is .039 (1 mm).
270
Toolholding Systems
page
Collet Chucks
Tap Chucks
Floating Holders
Adjustable Flange
Collets
DA – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Reamer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
ER – Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
TG – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
271
271
Toolholding Systems ®
• Offers the most accurate double angle design possible; • Collets collapse 1/32", and can grip on back taper and margins of
recommended for high-speed applications. drills to allow for maximum feed rates and more accurate holes.
• Unique bearing-style nosepiece provides fixture clearance. • Unique, adjustable stop screw allows drills to be preset and
provides through-coolant capability.
Collets
See page 284.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
SS050DA301544 1/64-1/4 0,5-6 300DA .50 .87 5.44 4.00 1.44 4.25 .30
SS062DA301319 1/64-1/4 0,5-6 300DA .62 .87 3.19 1.75 1.44 2.75 .27
SS062DA301544 1/64-1/4 0,5-6 300DA .62 .87 5.44 4.00 1.44 4.25 .47
SS062DA201325 1/64-3/8 0,5-10 200DA .62 1.44 3.25 1.25 1.44 2.81 .28
SS062DA201600 1/64-3/8 0,5-10 200DA .62 1.44 6.00 4.00 1.44 4.25 .52
SS075DA301344 1/64-1/4 0,5-6 300DA .75 .87 3.44 2.00 1.44 3.00 .43
SS075DA301544 1/64-1/4 0,5-6 300DA .75 .87 5.44 4.00 1.44 5.00 .68
SS075DA201600 1/64-3/8 0,5-10 200DA .75 1.44 6.00 4.00 1.69 4.12 .75
SS075DA101650 1/32-9/16 1-14 100DA .75 1.73 6.50 4.00 1.75 5.75 .81
SS100DA301544 1/64-1/4 0,5-6 300DA 1.00 .87 5.44 4.00 1.44 4.25 1.20
SS100DA201600 1/64-3/8 0,5-10 200DA 1.00 1.44 6.00 4.00 1.69 4.12 1.33
SS100DA101650 1/32-9/16 1-14 100DA 1.00 1.73 6.50 4.00 1.88 5.62 1.44
SS100DA181638 1/32-3/4 1-20 180DA 1.00 2.02 6.38 4.00 1.75 5.62 1.41
NOTE: Coolant-fed tools require coolant caps and collets.
catalog number
locknut torque**
nosepiece* locknut* wrench* stop screw*
(ft.-lbs.)
SS050DA301544 NP301 LN301 25-30 OEW075 SS031031G
SS062DA301319 NP301 LN301 25-30 OEW075 SS031031G
SS062DA301544 NP301 LN301 25-30 OEW075 SS031031G
SS062DA201325 NP201 LN201 32-40 OEW125 SS038031G
SS062DA201600 NP201 LN201 32-40 OEW125 SS038031G
SS075DA301344 NP301 LN301 25-30 OEW075 SS031031G
SS075DA301544 NP301 LN301 25-30 OEW075 SS031031G
SS075DA201600 NP201 LN201 32-40 OEW125 SS044038G
SS075DA101650 NP101 LN101 40-50 OEW150 SS050038G
SS100DA301544 NP301 LN301 25-30 OEW075 SS031031G
SS100DA201600 NP201 LN201 32-40 OEW125 SS044038G
SS100DA101650 NP101 LN101 40-50 OEW150 SS062041G
SS100DA181638 NP181 LN181 60-75 OEW175 SS075041G
*Chuck includes locknut, nosepiece, and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
272
Toolholding Systems
Double Angle ’04 Style Collet Chucks – Straight Shank
• Small outside diameter is ideal for use with machining • Unique, adjustable stop screw allows drills to be preset and
centers and for solving close center distance and fixture provides through-coolant capability.
clearance problems.
• Collets collapse 1/32" and can grip on back taper and
margins of drills to allow for maximum feed rates.
Collets
See page 284.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
SS050DA304438 1/64-1/4 0,5-6 300DA .50 .56 4.38 3.00 1.56 3.94 .24
SS050DA304681 1/64-1/4 0,5-6 300DA .50 .56 6.81 5.42 1.50 4.25 .37
SS075DA204469 1/64-3/8 0,5-10 200DA .75 .84 4.69 3.03 1.69 4.12 .58
SS075DA204712 1/64-3/8 0,5-10 200DA .75 .84 7.12 5.50 1.69 4.74 .89
SS100DA104488 1/32-9/16 1-14 100DA 1.00 1.06 4.88 2.97 1.94 4.19 1.08
SS100DA104731 1/32-9/16 1-14 100DA 1.00 1.06 7.31 5.40 1.94 6.62 1.62
NOTE: Coolant-fed tools require coolant caps and collets.
catalog number
locknut torque**
locknut* wrench* stop screw*
(ft.-lbs.)
SS050DA304438 LNA304M 25-30 OEW050 SS031031G
SS050DA304681 LNA304M 25-30 OEW050 SS031031G
SS075DA204469 LNA204M 32-40 OEW075 SS044038G
SS075DA204712 LNA204M 32-40 OEW075 SS044038G
SS100DA104488 LNA104M 40-50 OEW094 SS062041G
SS100DA104731 LNA104M 40-50 OEW094 SS062041G
*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
273
Toolholding Systems ®
• Offers a rugged heavy-duty design. • Unique adjustable stop screw allows drills to be preset and
• Collets collapse 1/32" and can grip on back taper and margins of provides through-coolant capability.
drills to allow for maximum feed rates and more accurate holes.
Collets
See page 284.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
SS050DA308516 1/64-1/4 0,5-6 300DA .50 .79 5.16 4.00 1.50 4.25 .28
SS062DA308516 1/64-1/4 0,5-6 300DA .62 .79 5.16 4.00 1.50 4.25 .44
SS062DA208569 1/64-3/8 0,5-10 200DA .62 1.15 5.69 4.00 1.62 4.25 .49
SS075DA308516 1/64-1/4 0,5-6 300DA .75 .79 5.16 4.25 1.50 4.25 .64
SS075DA208531 1/64-3/8 0,5-10 200DA .75 1.15 5.31 4.00 1.62 4.12 .66
SS075DA108588 1/32-9/16 1-14 100DA .75 1.42 5.88 4.00 1.81 5.31 .73
SS100DA308516 1/64-1/4 0,5-6 300DA 1.00 .79 5.16 4.00 1.50 4.25 1.14
SS100DA208531 1/64-3/8 0,5-10 200DA 1.00 1.15 5.31 4.00 1.69 4.12 1.18
SS100DA108556 1/32-9/16 1-14 100DA 1.00 1.42 5.56 4.00 1.94 4.88 1.23
SS100DA188638 1/32-3/4 1-20 180DA 1.00 1.73 6.38 4.00 1.94 5.62 1.41
NOTE: Coolant-fed tools require coolant caps and collets.
catalog number
locknut torque**
locknut* wrench* stop screw*
(ft.-lbs.)
SS050DA308516 LNA308M 20-25 OEW068 SS031031G
SS062DA308516 LNA308M 20-25 OEW068 SS031031G
SS062DA208569 NPA208 32-40 OEW100 SS044038G
SS075DA308516 LNA308M 20-25 OEW069 SS031031G
SS075DA208531 NPA208 32-40 OEW100 SS044038G
SS075DA108588 LNA108M 40-50 OEW125 SS050038G
SS100DA308516 LNA308M 20-25 OEW068 SS031031G
SS100DA208531 NPA208 32-40 OEW100 SS044038G
SS100DA108556 LNA108M 40-50 OEW125 SS062041G
SS100DA188638 NPA188 60-75 OEW150 SS075041G
*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
274
Toolholding Systems
ER-Style DIN 6499 Collet Chucks – Straight Shank
Collets
See pages
287-288.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
metric
SS200ER16182M .02-.40 0,5-10,0 16ER 20 mm 0,87 7,14 5,51 1,59 6,35 1.0
inch
SS038ER08500 .02-.19 0,5-5,0 8ER .375 .47 5.00 4.14 .85 4.31 .2
SS050ER11700 .02-.27 0,5-7,0 11ER .50 .63 7.00 5.51 1.27 6.31 .4
SS075ER16700 .02-.40 0,5-10,0 16ER .75 .87 7.00 5.51 1.24 3.54 .9
SS100ER20700 .02-.51 0,5-13,0 20ER 1.00 1.38 7.00 5.51 1.42 6.31 1.6
SS100ER25750 .04-.63 1,0-16,0 25ER 1.00 1.65 7.50 5.69 1.57 6.81 1.7
catalog number
locknut torque**
locknut* wrench* stop screw*
(ft.-lbs.)
metric
SS200ER16182M LER16M 15-20 ER16WEM CSS1020M
inch
SS038ER08500 LER08M 3-4 ER08WEM S-1762
SS050ER11700 LER11M 8-10 ER11WEM SS031031G
SS075ER16700 LER16M 15-20 ER16WEM SS050038G
SS100ER20700 LNER20M 60-75 ER20WM SS062041G
SS100ER25750 LNER25M 75-95 ER25WM SS075041G
*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
275
Toolholding Systems ®
• Tremendous Grip (TG) collet chucks provide the grip and • Collets collapse 1/64" and can grip on back taper and margins of
accuracy necessary for the demands of today’s machine tools drills to allow for maximum feed rates and more accurate holes.
because of its slow collet taper and bearing-style nosepiece. • The versatility and gripping power of the TG chuck is superior to
• Unique left-hand, adjustable backup screw allows drills to be competitive designs.
preset and provides through-coolant capability.
Collets
See pages
289-294.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
SS100TG050719 1/32-17/32 1-13 50TG 1.00 1.19 7.19 5.50 1.75 6.50 1.59
SS100TG050698G 1/32-17/32 1-13 50TG 1.00 1.50 6.98 5.50 1.54 6.30 1.59
NOTE: Coolant-fed tools require coolant caps and collets.
OEW HSW
catalog number
locknut torque**
locknut* wrench* stop screw*
(ft.-lbs.)
SS100TG050719 NPA050 60-75 OEW106 SS062041G
SS100TG050698G LNA050M 60-75 HSW34M SS062041G
*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
276
Toolholding Systems
Double Angle Tapping Chucks – Straight Shank (Tension Only)
Collet Type
Key Drive – for Through-Hole Tapping on Turning Centers
*ORDERING INFORMATION:
Order by catalog number.
Order wrench separately.
Order collets by matching series
with corresponding chuck.
Collets Collets available on
See pages pages 285-286.
285-286. Locknut included.
#0-1/2
SS075TOJ712 1/16P J .50 none .75 .81 7.12 5.13 .50 .72
M1-M12
#0-5/8
SS100TOK700 1/16P-1/8P K .75 none 1.00 1.06 7.00 5.12 .48 1.86
M1-M16
#0-7/8
SS100TOL750 1/16P-1/2P L .75 none 1.00 1.31 7.56 3.75 .56 2.24
M5-M24
NOTE: Through coolant not available.
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS075TOJ712 LNA204M 32-40 OEW075
SS100TOK700 LNAK04M 40-50 OEW094
SS100TOL750 LNAL04M 60-75 OEW125
*Chuck includes locknut. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
277
Toolholding Systems ®
• Minimum diameter for close center work. • Alternative springs available to adjust tension pressure. Helps
• Tension/compression design compensates for differences control thread quality under a variety of workpiece conditions.
between machine feed and tap lead. • Positive drive collets prevent tap slippage.
• Right-hand or left-hand tapping capability. • Economical to use.
• Simple collet-type design.
Collet Type
Key Drive – for Through-Hole Tapping on Turning Centers
Collets
See pages
285-286.
#0-1/2
SS075TCJ731 1/16P J .56 .19 .75 .81 7.31 5.13 .50 .72
M1-M12
#0-5/8
SS100TCK719 1/16P-1/8P K .56 .19 1.00 1.06 7.18 5.12 .48 1.86
M1-M16
#0-7/8
SS100TCL769 1/16P-1/2P L .56 .19 1.00 1.31 7.68 3.75 .56 2.24
M5-M24
NOTE: Through-coolant not available.
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS075TCJ731 LNA204M 32-40 OEW075
SS100TCK719 LNAK04M 40-50 OEW094
SS100TCL769 LNAL04M 60-75 OEW125
*Chuck includes locknut. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
278
Toolholding Systems
TG-Style Tapping Chucks – Straight Shank (Self Releasing)
• Accurate depth control for tapping blind holes. • Solid hard start ensures that the tap will begin to cut at the same
• Overriding clutch mechanism disengages when the tap reaches point every time, whether the tap is sharp or dull.
the required depth, enabling the tap to “free-spin” until the • Dependable, rugged, and compact.
machine spindle is reversed. • Positive drive collets prevent slippage.
• Tension-only design for tapping through holes. • Right-hand or left-hand tapping capability.
Tension Only
Collets
See pages
289-294.
Ø stroke to
catalog number comp. d1 d2 l1 l2 l3
disengage tension
SS100SRTG50562 #0-5/8 50TG .125 none 1.00 1.21 2.125 5.625 2.25 2.71
1/16P-1/8P
SS100SRTG75606 #0-7/8 75TG .125 none 1.00 1.96 2.125 6.062 2.25 3.34
1/16P-1/2P
SS100SRTG100700 #0-1 1/8 100TG .125 none 1.00 2.36 2.125 7.000 2.25 4.62
1/16P-3/4P
NOTE: Through coolant not available.
OEW HSW
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS100SRTG50562 NPA050 60-75 OEW106
SS100SRTG75606 LNA075M 80-100 HSW45M
SS100SRTG100700 LNA100M 120-150 HSW58M
*Chuck includes locknut. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
279
Toolholding Systems ®
• Holder is ideal for machining centers. • Minimum outside diameter and overhang provide maximum
• It provides .004 movement in all directions to compensate for both tool clearance.
angular and parallel misalignments. • Industry-standard Double Angle collets collapse 1/32".
Collets
See page 286.
Ø
catalog number d1 d2 dia. d2 hex l1 l2
inch mm
SS050DP308403 1/64-1/4 0,5-6 300DA .50 .69 5/8 4.03 2.50 .22
SS075DP308403 1/64-1/4 0,5-6 300DA .75 .69 5/8 4.03 2.57 .50
SS075DP208448 1/64-3/8 0,5-10 200DA .75 .94 7/8 4.48 2.88 .56
SS100DP308403 1/64-1/4 0,5-6 300DA 1.00 .69 5/8 4.03 2.50 .89
SS100DP208448 1/64-3/8 0,5-10 200DA 1.00 .94 7/8 4.50 3.00 .99
SS100DP108562 1/32-9/16 1-14 100DA 1.00 1.19 1 1/8 5.62 3.50 1.24
locknut shank
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS050DP308403 NPA338 20-25 OEW062 OEW050
SS075DP308403 NPA338 20-25 OEW062 OEW050
SS075DP208448 NPA238 32-40 OEW088 OEW062
SS100DP308403 NPA338 20-25 OEW062 OEW050
SS100DP208448 NPA238 32-40 OEW088 OEW062
SS100DP108562 NPA139 40-50 OEW112 OEW088
*Chuck includes locknut. Wrenches must be purchased separately. Use of two wrenches is recommended to prevent premature wear on float mechanism.
**For maximum safety and performance, tighten the locknut to the specified torque value.
280
Toolholding Systems
Double Angle Floating Holders – Straight Shank
• Holder provides .010 float in all directions to compensate for both • Industry-standard Double Angle collets collapse 1/32".
parallel and angular misalignments. • Recommended for stationary applications.
• Hollow design allows tool overhang to be shortened. • Adjusting nut varies spring tension to compensate for
cutter weight.
Collets
See page 286.
Ø
catalog number d1 d2 d3 l1 l2
inch mm
SS075FC208644 1/64-3/8 0,5-10 200DA .75 .94 1.88 6.44 4.00 .80
SS075FC108659 1/32-9/16 1-14 100DA .75 1.42 2.06 6.59 4.00 .85
SS075FC188688 1/32-3/4 1-20 180DA .75 1.73 2.38 6.88 4.00 .86
SS100FC208644 1/64-3/8 0,5-10 200DA 1.00 .94 1.88 6.44 4.00 1.43
SS100FC108659 1/32-9/16 1-14 100DA 1.00 1.42 2.06 6.59 4.00 1.46
SS100FC188688 1/32-3/4 1-20 180DA 1.00 1.73 2.38 6.88 4.00 1.52
SS100FC188888 1/32-3/4 1-20 180DA 1.00 1.73 2.38 8.88 6.00 1.97
locknut adjusting
nut
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS075FC208644 NPA238 32-40 OEW088 AHSW075200
SS075FC108659 LNA108M 40-50 OEW125 AHSW200475
SS075FC188688 NPA188 60-75 OEW150 AHSW200475
SS100FC208644 NPA238 32-40 OEW088 AHSW075200
SS100FC108659 LNA108M 40-50 OEW125 AHSW200475
SS100FC188688 NPA188 60-75 OEW150 AHSW200475
SS100FC188888 NPA188 60-75 OEW150 AHSW200475
*Chuck includes locknut. Wrenches must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
281
Toolholding Systems ®
• Holder floats 1/32" in all directions, 1/16" total movement to • Holder is self-centering and has adjustable float tension to
compensate for parallel misalignments. compensate for cutter weight.
• Holder can be used in stationary and rotating applications. • Holder is completely sealed to eliminate contamination, thus
• Its unique design uses rollers instead of balls to provide ensuring longer holder life.
friction-free movement and prolonged holder life. • It is also available in popular NC shanks.
Collets
See pages
285-286.
Ø
catalog number d1 d2 d3 l1 l2 l3
inch mm
SS062RDJ519 1/16-13/32 0-1/2 H.T. J .62 1.15 1.50 5.19 3.00 1.38 .45
1/8 S.S.P.T.
SS075RDJ519 1/16-13/32 0-5/8 H.T. J .75 1.15 1.50 5.19 3.00 1.38 .64
1/16, 1/8 P.T.
SS075RDK519 7/64-19/32 0-5/8 H.T. K .75 1.19 1.81 5.19 3.00 1.19 .65
1/16, 1/8 P.T.
SS100RDJ519 1/16-13/32 0-1/2 H.T. J 1.00 1.15 1.50 5.19 3.00 1.38 1.15
1/8 S.S.P.T.
SS100RDK519 7/64-19/32 0-5/8 H.T. K 1.00 1.19 1.81 5.19 3.00 1.19 1.16
1/16, 1/8 P.T.
SS100RDL666 7/64-27/32 0-7/8 H.T. L 1.00 1.88 2.19 6.66 4.00 1.41 1.20
1/16-1/2 P.T.
catalog number
locknut torque**
locknut* wrench*
(ft.-lbs.)
SS062RDJ519 NPA208 32-40 OEW100
SS075RDJ519 NPA208 32-40 OEW100
SS075RDK519 NPAK08 40-50 OEW112
SS100RDJ519 NPA208 32-40 OEW100
SS100RDK519 NPAK08 40-50 OEW112
SS100RDL666 NPAF08 60-75 OEW162
*Chuck includes locknut. Locknut wrench must be purchased separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
282
Toolholding Systems
Double Angle Adjustable Flange – Straight Shank
• Adjusts for parallel misalignment to compensate for • Unique adjustable stop screw allows drills to be preset and
machine inaccuracies. provides through-coolant capability.
• Collets collapse 1/32" and can grip on back taper and • Ideal for turret lathes and automatics.
margins of drills to allow for maximum feed rates and more • Saves setup times and reduces tool breakage.
accurate holes.
Collets
See page 284.
Ø
catalog number d1 d2 l1 l2 l3 min. l3 max.
inch mm
SS062AF308200 1/64-1/4 0,5-6 300DA .62 .84 2.00 1.12 1.38 1.68 .17
SS075AF308288 1/64-1/4 0,5-6 300DA .75 .84 2.88 2.00 1.38 2.38 .36
SS075AF208305 1/64-3/8 0,5-10 200DA .75 1.16 3.05 1.93 1.47 2.50 .38
SS075AF108431 1/32-9/16 1-14 100DA .75 1.42 4.31 2.40 1.80 3.80 .53
NOTE: Coolant-fed tools require coolant caps and collets.
catalog number
locknut torque**
locknut* wrench* stop screw*
(ft.-lbs.)
SS062AF308200 NPA329 20-25 OEW075 SS031031G
SS075AF308288 NPA329 20-25 OEW075 SS038031G
SS075AF208305 NPA229 32-40 OEW100 SS044038G
SS075AF108431 LNA108M 40-50 OEW125 SS050038G
*Chuck includes locknut and stop screw. Locknut wrench must be purchased separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
283
Collets ®
Double Angle
DA (metric) Standard
DA (inch) Standard
l/d l/d l/d l/d
Ø 1.000 / .375 1.188 / .539 1.438 / .769 1.625 / 1.035 Ø
300 series 200 series 100 series 180 series
1/32 300DA0031 — — — 1/32
3/64 300DA0047 200DA0047 100DA0047 180DA0047 3/64
1/16 300DA0062 200DA0062 100DA0062 180DA0062 1/16
5/64 300DA0078 200DA0078 100DA0078 180DA0078 5/64
3/32 300DA0094 200DA0094 100DA0094 180DA0094 3/32
7/64 300DA0109 200DA0109 100DA0109 180DA0109 7/64
1/8 300DA0125 200DA0125 100DA0125 180DA0125 1/8
9/64 300DA0141 200DA0141 100DA0141 180DA0141 9/64
5/32 300DA0156 200DA0156 100DA0156 180DA0156 5/32
11/64 300DA0172 200DA0172 100DA0172 180DA0172 11/64
3/16 300DA0188 200DA0188 100DA0188 180DA0188 3/16
13/64 300DA0203 200DA0203 100DA0203 180DA0203 13/64
7/32 300DA0219 200DA0219 100DA0219 180DA0219 7/32
15/64 300DA0234 200DA0234 100DA0234 180DA0234 15/64
1/4 300DA0250 200DA0250 100DA0250 180DA0250 1/4
17/64 — 200DA0266 100DA0266 180DA0266 17/64
9/32 — 200DA0281 100DA0281 180DA0281 9/32
19/64 — 200DA0297 100DA0297 180DA0297 19/64
5/16 — 200DA0312 100DA0312 180DA0312 5/16
21/64 — 200DA0328 100DA0328 180DA0328 21/64
11/32 — 200DA0344 100DA0344 180DA0344 11/32
23/64 — 200DA0359 100DA0359 180DA0359 23/64
3/8 — 200DA0375 100DA0375 180DA0375 3/8
25/64 — 200DA0391 100DA0391 180DA0391 25/64
13/32 — — 100DA0406 180DA0406 13/32
27/64 — — 100DA0422 180DA0422 27/64
7/16 — — 100DA0438 180DA0438 7/16
29/64 — — 100DA0453 180DA0453 29/64
15/32 — — 100DA0469 180DA0469 15/32
31/64 — — 100DA0484 180DA0484 31/64
1/2 — — 100DA0500 180DA0500 1/2
284
Collets
Double Angle
J
Ø tap size d1 l1 l2
series
K
Ø tap size d1 l1 l2
series
285
Collets ®
Double Angle
L
Ø tap size d1 l1 l2
series
• Collets are designed for use with Kennametal Roller Drive floating holders.
DA (inch) J, K, and L Series Reamer Collets
286
Collets
DIN 6499 form B
ER (metric) Standard
ER (inch) Standard
l/d l/d l/d l/d l/d
Ø 13,5 / 8,5 18,5 / 11,5 27,5 / 17,0 31,5 / 21,0 34,0 / 26,0 Ø
ER8 ER11 ER16 ER20 ER25
1/16 — — 16ER0062 20ER0062 25ER0062 1/16
3/32 — — 16ER0094 — — 3/32
1/8 — — 16ER0125 20ER0125 25ER0125 1/8
5/32 — — 16ER0156 — — 5/32
3/16 — — 16ER0188 20ER0188 25ER0188 3/16
7/32 — — 16ER0219 — — 7/32
1/4 — — 16ER0250 20ER0250 25ER0250 1/4
9/32 — — 16ER0281 — — 9/32
5/16 — — 16ER0312 20ER0312 25ER0312 5/16
11/32 — — 16ER0344 — — 11/32
3/8 — — 16ER0375 20ER0375 25ER0375 3/8
13/32 — — 16ER0406 — — 13/32
7/16 — — — 20ER0438 25ER0438 7/16
1/2 — — — 20ER0500 25ER0500 1/2
9/16 — — — — 25ER0562 9/16
5/8 — — — — 25ER0625 5/8
287
Collets ®
inch
#8 H.T. 16ERTC8 20ERTC8 25ERTC8 #8 H.T.
#10 H.T. 16ERTC10 20ERTC10 25ERTC10 #10 H.T.
#12 H.T. 16ERTC12 20ERTC12 25ERTC12 #12 H.T.
1/4 H.T. 16ERTC025 20ERTC025 25ERTC025 1/4 H.T.
5/16 H.T. — 20ERTC031 25ERTC031 5/16 H.T.
3/8 H.T. — 20ERTC037 25ERTC037 3/8 H.T.
288
Collets
Single Angle – Tremendous Grip
TG (metric) Standard
TG 50 TG 75 TG 100
Ø d1 = 19,30 d1 = 26,98 d1 = 35,03 Ø
l1 = 36,53 l1 = 46,84 l1 = 60,33
1,50 50TG015M — — 1,50
2,00 50TG020M — — 2,00
2,50 50TG025M — — 2,50
3,00 50TG030M 75TG030M 100TG030M 3,00
3,50 50TG035M 75TG035M 100TG035M 3,50
4,00 50TG040M 75TG040M 100TG040M 4,00
4,50 50TG045M 75TG045M 100TG045M 4,50
5,00 50TG050M 75TG050M 100TG050M 5,00
5,50 50TG055M 75TG055M 100TG055M 5,50
6,00 50TG060M 75TG060M 100TG060M 6,00
6,50 50TG065M 75TG065M 100TG065M 6,50
7,00 50TG070M 75TG070M 100TG070M 7,00
7,50 50TG075M 75TG075M 100TG075M 7,50
8,00 50TG080M 75TG080M 100TG080M 8,00
8,50 50TG085M 75TG085M 100TG085M 8,50
9,00 50TG090M 75TG090M 100TG090M 9,00
9,50 50TG095M 75TG095M 100TG095M 9,50
10,00 50TG100M 75TG100M 100TG100M 10,00
10,50 50TG105M 75TG105M 100TG105M 10,50
11,00 50TG110M 75TG110M 100TG110M 11,00
11,50 50TG115M 75TG115M 100TG115M 11,50
12,00 50TG120M 75TG120M 100TG120M 12,00
12,50 50TG125M 75TG125M 100TG125M 12,50
TG (metric) Coolant
TG 50 TG 75 TG 100
Ø d1 = 19,30 d1 = 26,98 d1 = 35,03 Ø
l1 = 36,53 l1 = 46,84 l1 = 60,33
6,00 50TGC060M 75TGC060M — 6,00
8,00 50TGC080M 75TGC080M — 8,00
10,00 50TGC100M 75TGC100M 100TGC100M 10,00
12,00 50TGC120M 75TGC120M 100TGC120M 12,00
289
Collets ®
TG (inch) Standard
TG 50 TG 75 TG 100
Ø d1 = .760 d1 = 1.062 d1 = 1.379 Ø
l1 = 1.438 l1 = 1.844 l1 = 2.375
3/64 50TG0047 — — 3/64
1/16 50TG0062 75TG0062 — 1/16
5/64 50TG0078 75TG0078 — 5/64
3/32 50TG0094 75TG0094 100TG0094 3/32
7/64 50TG0109 75TG0109 100TG0109 7/64
1/8 50TG0125 75TG0125 100TG0125 1/8
9/64 50TG0141 75TG0141 100TG0141 9/64
5/32 50TG0156 75TG0156 100TG0156 5/32
11/64 50TG0172 75TG0172 100TG0172 11/64
3/16 50TG0188 75TG0188 100TG0188 3/16
13/64 50TG0203 75TG0203 100TG0203 13/64
7/32 50TG0219 75TG0219 100TG0219 7/32
15/64 50TG0234 75TG0234 100TG0234 15/64
1/4 50TG0250 75TG0250 100TG0250 1/4
17/64 50TG0266 75TG0266 100TG0266 17/64
9/32 50TG0281 75TG0281 100TG0281 9/32
19/64 50TG0297 75TG0297 100TG0297 19/64
5/16 50TG0312 75TG0312 100TG0312 5/16
21/64 50TG0328 75TG0328 100TG0328 21/64
11/32 50TG0344 75TG0344 100TG0344 11/32
23/64 50TG0359 75TG0359 100TG0359 23/64
3/8 50TG0375 75TG0375 100TG0375 3/8
25/64 50TG0391 75TG0391 100TG0391 25/64
13/32 50TG0406 75TG0406 100TG0406 13/32
27/64 50TG0422 75TG0422 100TG0422 27/64
7/16 50TG0438 75TG0438 100TG0438 7/16
29/64 50TG0453 75TG0453 100TG0453 29/64
15/32 50TG0469 75TG0469 100TG0469 15/32
31/64 50TG0484 75TG0484 100TG0484 31/64
1/2 50TG0500 75TG0500 100TG0500 1/2
290
Collets
Single Angle – Tremendous Grip
TG (inch) Coolant
TG 50 TG 75 TG 100
Ø d1 = .760 d1 = 1.062 d1 = 1.379 Ø
l1 = 1.438 l1 = 1.844 l1 = 2.375
1/8 50TGC0125 — — 1/8
9/64 50TGC0141 — — 9/64
5/32 50TGC0156 — — 5/32
11/64 50TGC0172 — — 11/64
3/16 50TGC0188 — — 3/16
13/64 50TGC0203 — — 13/64
7/32 50TGC0219 — — 7/32
15/64 50TGC0234 — — 15/64
1/4 50TGC0250 75TGC0250 100TGC0250 1/4
17/64 50TGC0266 75TGC0266 100TGC0266 17/64
9/32 50TGC0281 75TGC0281 100TGC0281 9/32
19/64 50TGC0297 75TGC0297 100TGC0297 19/64
5/16 50TGC0312 75TGC0312 100TGC0312 5/16
21/64 50TGC0328 75TGC0328 100TGC0328 21/64
11/32 50TGC0344 75TGC0344 100TGC0344 11/32
23/64 50TGC0359 75TGC0359 100TGC0359 23/64
3/8 50TGC0375 75TGC0375 100TGC0375 3/8
25/64 50TGC0391 75TGC0391 100TGC0391 25/64
13/32 50TGC0406 75TGC0406 100TGC0406 13/32
27/64 50TGC0422 75TGC0422 100TGC0422 27/64
7/16 50TGC0438 75TGC0438 100TGC0438 7/16
29/64 50TGC0453 75TGC0453 100TGC0453 29/64
15/32 50TGC0469 75TGC0469 100TGC0469 15/32
31/64 50TGC0484 75TGC0484 100TGC0484 31/64
1/2 50TGC0500 75TGC0500 100TGC0500 1/2
291
Collets ®
hand tap
catalog number d1 Ø l1 l2 s1
size
292
Collets
Single Angle – Tremendous Grip
hand tap
catalog number d1 Ø l1 l2 s1
size
293
Collets ®
hand tap
catalog number d1 Ø l1 l2 s1
size
294
Index
295
Index ®
296
Index
KM-STT KM Micro Cutting Unit (On-Edge Threading) . . . . . . . 153 NGP Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 106
KM-SVG KM Micro Cutting Unit Integral Cutoff . . . . . . . . . . . . 156 NJ Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75
KM-SVG KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 150 NJF Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75
KM-SVJ KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 150 NJK Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75
KM-SWL KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 151 NJP Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 75
KM-TIM KM Micro Systems Tooling (Timing Heads) . . . . . . . . 158 NKL-F Top Notch Profiling Toolholder. . . . . . . . . . . . . . . . . . 171
KRC Double Angle K-Series Reamer Collets (Inch). . . . . . 286 NP-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109
KT Torx Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 NPD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109
KTC Double Angle Tap Collet (K-Series, Inch) . . . . . . . . . 285 NPGR Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63
KWCD General Purpose Solid Carbide Drills. . . . . . . . . 230-238 NPR/L Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63
NR Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107
L NR-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107
LRC Double Angle L-Series Reamer Collets (Inch) . . . . . . 286 NRD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108
LSA LT Threading Toolholder . . . . . . . . . . . . . . . . . . . . . . 173 NRP Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108
LT-ER-60CB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 84 NT Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72
LT-ER-ISOCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 88 NT-1L Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72
LT-ER-NPTCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91 NT-K Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73
LT-ER-NPTFCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92 NTC Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 74
LT-ER-UNCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 86 NTF Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73
LT-ER-WCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 94 NTK Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 73
LT-ER/L-55 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 93 NTP Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 72
LT-ER/L-60 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 84 NU Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110
LT-ER/L-BSPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 96 NV Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110
LT-ER/L-ISO LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 88 NWC Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 76
LT-ER/L-NPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LT-ER/L-NPTF LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92 S
LT-ER/L-UN LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 86 S-CBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186
LT-ER/L-UNJ LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 90 S-CBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186
LT-ER/L-W LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 94 S-CSE Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
LT-NR-60CB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 85 S-DT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
LT-NR-ISOCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 89 S-FT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
LT-NR-NPTCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91 S-GT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
LT-NR-UNCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 87 S-HT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
LT-NR-WCB LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 95 S-KBF Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186
LT-NR/L-55 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 93 S-KBL Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 186
LT-NR/L-60 LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 85 S-LSE Laydown Threading Bar . . . . . . . . . . . . . . . . . . . . . . 197
LT-NR/L-BSPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 96 S-LT-SET Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
LT-NR/L-ISO LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 89 S-SCF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
LT-NR/L-NPT LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 91 S-SCL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
LT-NR/L-NPTF LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 92 S-SG Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
LT-NR/L-UN LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 87 S-SGR Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
LT-NR/L-UNJ LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 90 S-STF Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
LT-NR/L-W LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 95 S-STF-E Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
LTC Double Angle Tap Collet (L-Series, Inch). . . . . . . . . . 286 S-STL Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
S-STL-E Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
N S-SWU Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
NAS Top Notch Threading, Grooving, and S-TGSET Single Angle TG Collet Set . . . . . . . . . . . . . . . . . . . . 291
Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 S-TGSTSET Single Angle Tapping Collet Set . . . . . . . . . . . . . . . . 293
NB Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110 S10P Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 128
NBD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110 SCAC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 166
NDC-V (NPT) Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 76 SCGT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
NF Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108 SCLC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 166
NF-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 108 SCMT-11 Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
NFD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109 SCMT-LF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
NFD-KI Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 109 SCMT-MF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
NG Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 106 SCMT-UF Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
NG-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . 104-105 SDAC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 167
NG1L Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 105 SDJC-F Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 167
NGD Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107 SDPC Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 168
NGD-K Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 107 SLEC High-Performance Solid Carbide End Mills (Inch) . . . 261
297
Index ®
298
Metalcutting Safety
(Please read this before using consulted. Obtain from Kennametal and read the applicable
products listed in this catalog.) Material Safety Data Sheet before grinding.
Modern metalcutting operations involve high energy, high Cutting tools are only one part of the worker-machine tool
spindle or cutter speeds, and high temperatures and cutting system. Many variables exist in machining operations, including:
forces. Hot, flying chips may be projected from the workpiece metal removal rate; workpiece size, shape, strength and rigidity;
during metalcutting. Although advanced cutting tool materials chucking and fixturing; the load carrying capability of centers;
are designed and manufactured to withstand the high cutting cutter and spindle speed and torque limitations; the holder and
forces and temperatures that normally occur in these boring bar overhang; available power, and the condition of the
operations, they are susceptible to fragmentating in service, tooling and the machine. A safe metalcutting operation must
particularly if they are subjected to over-stress, severe impact or take all of these variables, and others, into consideration.
are otherwise abused. Therefore, precautions should be taken to Kennametal has no control over the end use of its products
adequately protect workers, observers and equipment against or the environment into which those products are placed.
hot, flying chips, fragmented cutting tools, broken workpieces or Kennametal urges that its customers adhere to the
other similar projectiles. Machines should be fully guarded and recommended standards of use of their metalcutting machines
personal protective equipment should be used at all times. and tools, and that they follow procedures that ensure safe
When grinding carbide or other advanced cutting tool materials, metalcutting operations. The technical information included
a suitable means for collection and disposal of dust, mist or throughout this catalog, as well as recommendations on
sludge should be provided. Overexposure to dust or mist machining practices referred to herein are only advisory in
containing metallic particles can be hazardous to health, nature and do not constitute representations or warranties and
particularly if exposure continues over an extended period of are not necessarily appropriate for any particular work
time, and may cause eye, skin and mucous membrane irritation environment or application.
and temporary or permanent respiratory disease. Certain For more information, we suggest you obtain Kennametal’s
existing pulmonary and skin conditions may be aggravated by Metalcutting Safety booklet, if you do not already have one.
exposure to dust or mist. Adequate ventilation, respiratory Quantities of safety booklets and Material Safety Data Sheets
protection and eye protection should be provided when grinding, may be obtained free from the Kennametal Corporate
and workers should avoid breathing of and prolonged skin Compliance Office at 724-539-5747, or fax 724-539-5439.
contact with dust or mist. General Industry Safety and Health For product safety and environmental inquiries, contact our
Regulations, Part 1910, U.S. Department of Labor, published Corporate Environmental Health and Safety Office at
in Title 29 of the Code of Federal Regulations should be 724-539-5631 or fax 724-539-5372.
Kennametal, the block-style K, “Kennametal.The Metalcutting Authority.”, KENNA PERFECT, Kenloc, Kendex, Top Notch, A3, A2, KENNA UNIVERSAL, KC,
KC9125, KC9110, KT, KT315, KC9040, KC9225, KC9315, KC8050, KC5010, KC9240, KC9245, KC5025, KD, KD100, KC5410, K, K313, KC730, KC9215, K68,
KD050, KD120, KC720, K420, KMF, KC5035, KT5135, KC610, KB, KB5625, KM, KM Micro, K-Lock, Kenclamp, Wedgelock, Dynapoint, TF, SE, KC7210, K10, CS5,
KC7215, K600, K-SS, K-NI, K-MS, K-AA, K-TI, KC610M, K600, KC635M, KC631M, KC633M, and KC625M are trademarks of Kennametal Inc., and are used as
such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property
rights concerning that name or logo.
299
R
PRSRT STD
AUTO
Kennametal Inc. U.S. POSTAGE PAID
Metalworking Systems Division LATROBE, PA
P.O. Box 231 PERMIT NO. 64
Latrobe, PA 15650
Customer Service
(United States and Canada) Phone
800-446-7738
R
Kennametal Ltd.
6497 Edwards Blvd.
Mississauga, Ontario L5T 2V2
Customer Service
(United States and Canada) Phone
800-446-7738
R
Kennametal Inc.
Metalworking Systems Division
P.O. Box 231
Latrobe, PA 15650