Documente Academic
Documente Profesional
Documente Cultură
HDL-MPL8-RF.16
Parameters Overview
Electrical Parameters
Working voltage DC5V (from wireless power interface)
Power consumption 55mA/DC5V
Indoor communication
30m(barrier free)
distance
RSSI Received Signal
>-80dbm
Strength Indication
Band, PSK (Suggestion: your setting
Factory frequency should not be same as the factory set-
ting)
HDL-MPL8-RF.16 8-button wireless panel is a new genera-
Environmental Conditions tion of wall-mounted switch with new design. It has 8 control
Working temperature -5℃~45℃ buttons and the left & right side of the button can be pro-
Working relative humidity Up to 90% grammed separately. 2 buttons are used for the page
Storage temperature -20℃~+60℃ switching. Each button can be displayed with an icon in the
Storage relative humidity Up to 93% LCD screen, which is customized for final user.
Approved
CE
Functions
RoHS ■ The wireless power interface provides the working
(North America) 904MHz to 928 MHz ■ Multi key mode: Invalid, Single on-off, Single on, Single
off, Combination on-off, Combination on, Combination
Default PSK HDL-SecurityKey0
off, Dbclick/single switch, Dbclick/combination switch,
Momentary, Clock, Short/Long press, Short Press/
Long jog.
Important Notes ■ Multi key control mode: Scene, Sequence, Timer
■ It must work in conjunction with wireless power interface (be switch, Universal switch, Single channel lighting con-
installed in wall-box). trol, Broadcast scene, Broadcast channel, Curtain
■ Installation - US wall box. switch, GPRS control, Panel control, Security module,
■ Check all connection, avoid any mistake. Z-audio control, Universal control, Link page, DALI
■ The subnet ID of the panel must be same as the mesh gate- area dimmer, RGB control, Logic light adjust, Logic
way. scene.
■ Supports online upgrading via HDL Buspro software.
Installation Steps
■ Mount the wireless power interface in the wall-box.
■ Put this device into wireless power interface.
Dimensions
10.5
86
LCD
Button indicator
Signal interface
Control button
116
Wireless
Keep pressing for 2S
The seventh and
at the same time
eighth buttons‘ LED
will light together
Installation
② ① 2
Panel Panel power interface wall BOX Separate panel and power interface
Installation: Hold the edge of the panel (shown as above), insert the power interface module vertically. Do not push the panel too hard.
Split: Insert a 2.5mm-screwdriver to the split gap, pry up from position 1 to 2, wiring hole will open. Then separate the panel and wireless
power interface.
Wall box: For convenience of the wiring installation, the wall box should be deeper than the power interface.
Safety Precautions
■ Mounting position: Indoor.
■ Never let liquids get into the module, it will damage this device.
Package Contents
■ Device*1 / Datasheet*1
Need help or advice? Contact us via
Professional Home and Building Automation
www.hdlautomation.com(171020) support@hdlchina.com.cn 2/ 2