Documente Academic
Documente Profesional
Documente Cultură
“EVALUACIÓN DE LA
Análisis de la
ANISOTROPÍA EN LAS
PROPIEDADES MECÁNICAS DEL
ACERO INOXIDABLE AISI 304
LAMINADO EN FRÍO”
Desarrollado por:
Ingeniería, Universidad de
Carabobo, Venezuela
Revista INGENIERÍA UC, vol. 19, núm. 1, enero-abril, 2012, pp. 7-15
Universidad de Carabobo
Valencia, Venezuela
RESUMEN
ABSTRACT
Metallic materials have unique mechanical properties, the same that can
be measured according to the direction in which they are evaluated, we
call this Anisotropy of metals. In the scientific article to be analyzed, the
anisotropic evaluation of an AISI 304 Austenitic Stainless Steel was made,
obtaining samples for evaluation in three states; delivery status (initial) and
under two cold rolling treatments. Variation in hardness, mechanical
properties, crystallographic textures was determined for each condition of
the samples. The sample in the delivery (initial) state presented a slight
anisotropy, the same that increases in the following samples in which cold
treatment was presented respectively. Also a variation in the cold
treatment crystallographic texture where fiber textures stand out in the
transverse direction.
OBJETIVOS
OBJETIVO GENERAL
OBJETIVO ESPECIFICO