Documente Academic
Documente Profesional
Documente Cultură
BLUETOOTH ADAPTERS
1. Locate the OBD-II diagnostics 5. Launch and configure the app 7. Connect to the adapter and car
connector in your car First, launch the app. Then, select ‘Extras’ from Navigate back from the settings to the Status
Search for 16-pin D-shaped connector that will the bottom navigation bar. Select ‘Connectivity’ view. Tap the connect button (link icon) at the top
match the adapter. The connector should be under the ‘Settings’ label. right corner of the view.
located in or near the interior dashboard close
(within 1 m or 3 ft) to the steering wheel. Typical If pairing code for the adapter is requested, refer
place for the socket is the compartment under to the adapter user guide for the code. Most
the driver's side dashboard. common codes are ‘0000’ and ‘1234’.