Documente Academic
Documente Profesional
Documente Cultură
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact with the primary DU.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The DUG has no contact with the primary DU.
The DUG has no contact with the primary DU.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This alarm is raised if the configuration data does not match the cabinet product data, stored internally in the RBS (in the SCU/
The VSWR at the TRU output has exceeded the limits defined in the hardware.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The VSWR at the TRU output has exceeded the limits defined in the hardware.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The VSWR at the TRU output has exceeded the limits defined in the hardware.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
For DXU:There is an internal hardware fault in the DXU.For CDU or CU:There is a fault affecting the TX on the CDU-F/CU. See re
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
The DXU has no contact with one or more TRUs/DRUs that are marked as expected in the IDB.
The DUG has no contact with the primary DU.
For DXU:There is an internal hardware fault in the DXU.For CDU or CU:There is a fault affecting the TX on the CDU-F/CU. See re
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The VSWR at the TRU output has exceeded the limits defined in the hardware.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact with the primary DU.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This alarm is raised if the configuration data does not match the cabinet product data, stored internally in the RBS (in the SCU/
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This alarm is raised if the configuration data does not match the cabinet product data, stored internally in the RBS (in the SCU/
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact with the primary DU.
The DUG has no contact with the primary DU.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DXU has no contact with one or more TRUs/DRUs that are marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
A software file in DXU or ECU flash is missing orcorrupted. Probable cause is either failed software download or connection of
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DXU has no contact with one or more TRUs/DRUs that are marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact with the primary DU.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The VSWR at the TRU output has exceeded the limits defined in the hardware.
For DXU:There is an internal hardware fault in the DXU.For CDU or CU:There is a fault affecting the TX on the CDU-F/CU. See re
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
The DUG has no contact with the primary DU.
The DUG has no contact with the primary DU.
The DUG has no contact with the primary DU.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact with the primary DU.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DXU has no contact with one or more TRUs/DRUs that are marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DXU has no contact with one or more TRUs/DRUs that are marked as expected in the IDB.
An alarm is raised if there is no contact with a unit expected to be in the RBS.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact with the primary DU.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
For DXU:There is an internal hardware fault in the DXU.For CDU or CU:There is a fault affecting the TX on the CDU-F/CU. See re
An alarm is raised if there is no contact with a unit expected to be in the RBS.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
An alarm is raised if there is no contact with a unit expected to be in the RBS.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault is raised if the difference in signal strength between two antennas in the same antenna system exceeds the limits de
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
For GPS receiver: The defined GPS receiver has a hardware fault. If no backup synchronization source (PCM) is available, fault
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
This fault indicates that the cabinet door is open. When the door is closed, the alarm will cease within a minute.
The VSWR at the TRU output has exceeded the limits defined in the hardware.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
The DUG has no contact or degraded communication with one or more RUSs/RRUSs marked as expected in the IDB.
e, fault AO TF I1B:2 is raised.
e, fault AO TF I1B:2 is raised.