Documente Academic
Documente Profesional
Documente Cultură
This Flooring Systems Product Guide will help you choose the right Corotech product
for different projects and needs. Your Benjamin Moore retailer or specialty coatings
representative can assist you further or guide you through unique project considerations,
including the most important part of the flooring process – thorough and effective preparation.
Prep & Repair
V600 Oil & Grease Emulsifier V165 Epoxy Patch V620 Concrete & Masonry Etcher
Usage: Concentrated cleaner and degreaser, Usage: A 100% solids epoxy co-polymer Usage: Concentrated acid etching solution
extremely effective in lifting, removing and matrix formulated for repairing and patching that is effective in profiling, opening and
capturing oil, grease, fats and animal by- concrete floors. It is a rapid-setting compound neutralizing concrete to improve coating
products. which can be mixed to a trowelable or a penetration and adhesion.
self-levelling slurry.
V155 100% Solids Epoxy V156 Moisture Tolerant V440 Waterborne V400 Polyamide V410 Fast Dry V160 Epoxy Mastic V430 100% Solids Epoxy V540 Waterborne Urethane V580 Moisture Cure Urethane V500/510 Aliphatic
Product
Pre-primer Quick Set Epoxy Sealer Amine Epoxy Epoxy Polyamide Epoxy Acrylic Urethane
Product Type 2-Component Epoxy 2-Component Polyamide Epoxy 2-Component Amine Adduct Epoxy 2-Component Polyamide Epoxy 2-Component Polyamide/ 2-Component Polyamide Epoxy 2-Component Cycloaliphatic 2-Component Acrylic Polyurethane 1-Component Aromatic 2-Component Aliphatic
Amine Epoxy Amine Epoxy Moisture Cure Urethane Acrylic Polyurethane
Usage A superior low-viscosity, clear pene- A fast-dry, waterborne polyamide Moderate- to heavy-duty protection A medium-build epoxy for moder- A high-build epoxy for moderate- A high-build epoxy that yields Heavy-duty protection from a 100% A durable “showroom” finish A high-solids, moisture cured urethane The ultimate in heavy-duty
trating primer that is an important first epoxy formulated to provide supe- in commercial environments exposed ate- to heavy-duty performance in to heavy-duty performance in heavy-duty protection in harsh solids epoxy for demanding industrial/ delivering performance and intended for use on floors exposed performance and appearance for
step for proper prep of bare concrete rior chemical, abrasion and impact to frequent foot traffic and occasional commercial/industrial environments commercial/industrial environments industrial/commercial environments commercial environments exposed to appearance in industrial/commercial to moderate to extreme conditions. demanding industrial and commercial
for heavy duty and moderate industri- resistance when used on concrete traffic of lightweight rubber-tired exposed to heavy foot traffic and exposed to heavy foot traffic and exposed to heavy equipment and foot heavy vehicular and pedestrian traffic, environments exposed to heavy-tired It provides excellent abrasion and environments that need a “showroom”
al/commercial flooring systems. Also floors. This product can be used as a vehicles, intermittent spillage of mild occasional traffic of lightweight occasional traffic of lightweight traffic, constant moisture, intermittent constant moisture, intermittent strong vehicle traffic, strong chemicals, and impact resistance as well as chemical finish. Stands up to constant traffic
versatile as a “barrier coat” on previous stand-alone clear finish (two coats) or chemicals, occasional steam cleaning rubber-tired vehicles, intermittent rubber-tired vehicles, intermittent strong chemical spills, and frequent chemical spills, and frequent cleaning exterior weather conditions. resistance, making it an excellent from heavy rubber-tired vehicles and
finishes to ensure bonding of subse- as a base coat for high-performance and powerwashing. spillage of mild to heavier chemicals, spillage of mild to heavier cleaning with chemicals, steam and with chemicals, steam and power choice for flooring areas in wheeled equipment, the harshest
quent recoat. floor systems. The highly cross-linked occassional steam and chemical chemicals, occasional steam power washers. washers. warehousing and processing solvents and chemicals, and exterior
formula is suited for floors subject to cleaning. and chemical cleaning. environments. weather conditions.
severe conditions.
Features - Topcoat with most products: - Quick-set formula that can tolerate - Water cleanup/low odour - Highly cross-linked film - Rapid return to service (24 hrs. - High-build film - Self-levelling 100% solids formula - Water cleanup - Single-component product - Superior chemical and solvent
epoxies, urethanes, acrylics some moisture in the masonry - Easy application with excellent - Resists many chemicals at 25 ⁰C) with high build - Suitable for immersion - Very low VOC - Low odour uses air moisture to crosslink resistance (including Skydrol
- Does not shrink - Water clean-up adhesion and solvents - Can be applied down to 0 ⁰C, - Outstanding abrasion resistance - Tenacious adhesion to concrete - Good durability - Exposure to sunlight will cause hydraulic fluid)
- Displaces moisture as it penetrates - Very good resistance to water - Suitable for immersion with 5-day cure - Outstanding durability yellowing - Outstanding gloss and colour
and seals and chemicals - Smooth gloss finish retention
- Prevents outgassing and pinholes - Fast dry - Outstanding abrasion and
impact resistance
Application Self-levelling 98% solids formula may Brush and roll, or squeegee Ideal for application following Can be applied over most existing Spray, roll or brush. Spray, roll or brush. Apply with a squeegee and spiked Spray, roll or brush Spray, roll or brush. Spray, roll or brush; no induction time
Notes be sprayed, brushed or rolled. with back roll. acid etching; tolerant of light levels industrial coatings in good condition. shoes, with back roll
of moisture. Spray, roll or brush. Spray, roll or brush.
Dry Time 25 °C To touch, 12 hrs. Recoat, To touch, 3 hrs. Recoat, 5 hrs. To touch, 2 hrs. Recoat, 8 hrs. To touch, 6 hrs. Recoat, 10-12 hrs. To touch, 3-4 hrs. Recoat, 8 hrs. To touch, 4 hrs. Recoat, 12 hrs. To touch, 6 hrs. Recoat, 12-24 hrs. To touch, 1 hr. Recoat, 3 hrs. to To touch, 1 hr. Recoat, To touch, 2 hrs. Recoat, 8 hrs. - 72 hrs.
(77 °F) 16 hrs. (max 72 hrs.). (max 72 hrs.). When used as Full cure, 3-5 days. Foot traffic, 24-48 hrs. to a maximum of 21 days. to a maximum 6 weeks. Full cure, 7 days. 28 days. Full cure, 4-7 days. 16-72 hrs. Return to service, Full service, 24-48 hrs.
stand-alone sealer: light use, 3 days; Full cure 7 days. Full cure 24 hrs. Full cure, 3-4 days. 8 hrs.
moderate to heavy use, 5-7 days.
VOC (mixed) 6 g/L (0.05 lbs./gal.) <100 g/L (0.82 lbs./gal.) < 250 g/L (2.09 lbs./gal.) <340 g/L (2.83 lbs./gal.) <250 g/L (2.09 lbs./gal.) <200 g/L (1.66 lbs./gal.) 13 g/L (0.11 lbs./gal.) <100 g/L (0.83 lbs./gal.) < 340 g/L (2.83 lbs./gal.) Gloss <250 g/L (2.09 lbs./gal.),
Semi-Gloss <340 g/L (2.83 lbs./gal.)
Custom Clear only Clear only Available (universal colorant) Available (IM colorant) White only Available (IM colorant) Ready mix colours only Clear and white only Clear only Available (IM colorant)
Colours
Vol Solids 98% 31% 42% 64% Gloss, 63% Semi-Gloss, 72% 78% 100% 53% (white) / 43% (clear) 56% V500 gloss 72% / V510 semi-gloss 62%
(mixed) 67% Hi Build
Technical Specular Gloss 60+ @ 60⁰ Specular Gloss 45-55 @ 60⁰ Specular Gloss 85+ @ 60⁰ Specular Gloss Gloss 85+ @ 60⁰ Specular Gloss Gloss 85+ @60⁰ Specular Gloss 45-55+ @ 60⁰ Specular Gloss 80+ @ 60⁰ Specular Gloss 70+ @ 60⁰ Specular Gloss 80+ @ 60⁰ Specular Gloss Gloss 85+ @ 60⁰
Data Mixing Ratio 3:1 Mixing Ratio 4.3:1 Mixing Ratio 3:1 Semi-Gloss 40-50 @ 60⁰ Mixing Ratio 1:1 Mixing Ratio 1:1 Mixing Ratio Colours 2:1 Mixing Ratio 3.75:1 Mixing Ratio none SG 55-65 @ 60⁰
Induction Time 25 ⁰C (77 ⁰F) 30 mins. Induction Time 25 ⁰C (77 ⁰F) none Induction Time 25 ⁰C (77 ⁰F) 30 mins. Hi Build 65-75 @ 60⁰ Induction Time 25 ⁰C (77 ⁰F) 30 mins. Induction Time 25 ⁰C (77 ⁰F) 15 mins. Clear 1.66:1 Induction Time 25 ⁰C (77 ⁰F) 15 mins. Induction Time 25 ⁰C (77 ⁰F) none Mixing Ratio 4:1
Pot Life 25 ⁰C (77 ⁰F) 3-4 hrs. Pot Life 25 ⁰C (77 ⁰F) 1 hr. Pot Life 25 ⁰C (77 ⁰F) 3 hrs. Mixing Ratio 1:1 Pot Life 25 ⁰C (77 ⁰F) 3 hrs. Pot Life 25 ⁰C (77 ⁰F) 2 hrs. Induction Time 25 ⁰C (77 ⁰F) None Pot Life 25 ⁰C (77 ⁰F) 1 hr. Pot Life 25 ⁰C (77 ⁰F) use within 6 hrs. after Induction Time 25 ⁰C (77 ⁰F) 15 mins.
Wet Film Thickness 1.0 - 1.5 mils Wet Film Thickness 4.5 - 5.0 mils Wet Film Thickness 3.5 - 4.5 mils Induction Time 25 °C (77 °F) 30 mins. Wet Film Thickness 3.4 - 4.3 mils Wet Film Thickness 6.4 - 10.3 mils Pot Life 25 ⁰C (77 ⁰F) 30 mins. Wet Film Thickness White 2.8 - 3.7 mils exposure to air Pot Life 25 ⁰C (77 ⁰F) 2-3 hrs.
Pot Life 25 ⁰C (77 ⁰F) 7 hrs.
Dry Film Thickness 1.0 - 1.5 mils Dry Film Thickness 1.4 - 1.6 mils Dry Film Thickness 1.5 - 1.9 mils Dry Film Thickness 1.5 - 1.9 mils Dry Film Thickness 5.0 - 8.0 mils Wet Film Thickness 8 - 15 mils Clear 3.5 - 4.6 mils Wet Film Thickness 2.7 - 3.7 mils Wet Film Thickness 3.5 - 5.0 mils
Wet Film Thickness Gloss/SG 4.0 - 5.0 mils
Practical Coverage 46.5 - 74.3 sq. m. Theoretical Coverage 27.9 - 32.5 sq. m. Theoretical Coverage 32.5 - 41.8 sq. m. Theoretical Coverage 34.8 - 39.5 sq. m. Theoretical Coverage 13.9 - 23.2 sq. m. Dry Film Thickness 8 - 15 mils Dry Film Thickness White 1.5 - 2.0 mils Dry Film Thickness 1.5 - 2.0 mils Dry Film Thickness Gloss 2.5 - 3.6 mils
Hi Build 6.0 - 8.0 mils
(masonry) (500 - 800 sq. ft.)/3.79 L (300 - 350 sq. ft.)/3.79 L (350 - 450 sq. ft.)/3.79 L Dry Film Thickness Gloss/SG 2.5 - 3.1 mils (375 - 425 sq. ft.)/3.79 L (150 - 250 sq. ft.)/3.79 L Theoretical Coverage 9.3 - 18.6 sq. m. Clear 1.5 - 2.0 mils Theoretical Coverage 41.8 - 55.7 sq. m. SG 2.2 - 3.1 mils
Hi Build 4.0 - 5.2 mils (100 - 200 sq. ft.)/3.79 L Theoretical Coverage White 39.5 - 52.6 sq. m. (450 - 600 sq. ft.)/3.79 L Theoretical Coverage 29.7 - 41.8 sq. m.
Theoretical Coverage Gloss/SG 29.7 - 37.2 sq. m. (425 - 566 sq. ft.)/3.79 L (320 - 450 sq. ft.)/3.79 L
(320 - 400 sq. ft.)/3.79 L Clear 32.0 - 42.7 sq. m.
Hi Build 18.6 - 24.6 sq. m. (345 - 460 sq. ft.)/3.79 L
(200 - 265 sq. ft.)/3.79 L
Commercial Flooring Systems
In-Person Support
- Benjamin Moore® retailers (locate the retailer nearest you at benjaminmoore.ca)
- Call 877-711-6830
Add value to commercial, industrial and select residential spaces by protecting and beautifying the
floors. From clear high-build epoxies that give depth and beauty to natural concrete, to pigment-
ed thinner films that roll on with no special tools, Benjamin Moore® Corotech® flooring products
enhance appearance and provide lasting protection.
This Flooring Systems Product Guide will help you choose the right Corotech product for your
flooring project. For additional expert guidance, talk to your Corotech retailer or reference the
tools and literature listed above.
To learn about the entire portfolio of Corotech high-performance primers, epoxies, urethanes
and more, visit benjaminmoore.ca or talk to your retailer.