Documente Academic
Documente Profesional
Documente Cultură
Operation Guide
Operation Guide Guide d’utilisation Guía de funcionamiento
Guida Operativa Betriebsanleitung Guia de Operação
Contents
iPod/iPhone dock
Play an iPhone or iPod with either a 30-pin or Lightning connector. Your music will never
have sounded so good, and your iPhone or iPod will charge at the same time.
DAB/DAB+ receiver
Digital Audio Broadcasting (DAB) is the next big thing in radio. Clarity, station choice and
ease of tuning are often cited as benefits. There are two versions, DAB and DAB+. Your
Retro DAB+ works with either. You can store up to 10 DAB/DAB+ stations as presets.
FM Radio
DAB isn’t everywhere, so there’s an FM radio in your Retro DAB+ that means you can listen
wherever DAB or FM radio is available. You can store up to 10 FM stations as presets.
Auxiliary connection
Lets you plug in and listen to an external audio source so your older devices aren’t left out.
Dual Alarms
Wake up to your favourite radio station, favourite tracks, or a beeper. Or two.
Talk to us
We would really value your feedback – how well have we succeeded in our mission to create a stylish, high-
quality sound experience? If you’d like to share anything about your Retro DAB+ – things you love, things
you’d like, or things that could be better, we’d love to hear from you. Email us at info@viewquest.co.uk.
And of course, we’re here to help you sort things out if you have any problems; email our support team
at support@viewquest.co.uk for expert help on any aspect of your Retro DAB+. Please write to us – we
have friendly people ready to help, and we really want your Retro DAB+ experience to be first class.
Please read this guide before using your unit – it contains guidance and recommendations that can
help ensure long-lasting, trouble-free, safe operation. Please keep this guide for future reference.
Be careful. Avoid:
• Liquids: don’t expose your unit to drips or splashes, and don’t put liquid containers like vases on it or near it.
• Humidity or moisture: humid or moist places like outdoors, bathrooms
and steam rooms need specially-designed equipment.
• Heat: don’t expose your unit to direct sunlight or heat from radiators or other heat
sources. Audio/video devices can generate a lot of heat; don’t put your unit on top
of such devices. Don’t use naked flames anywhere near your unit either.
• Dust and restricted airflow: make sure your unit is in free-flowing air to avoid overheating.
• Vibration: constant vibration can cause damage.
• Extreme climates: this unit is designed for operation in moderate climates.
IMPORTANT:
• DO NOT listen at high volume: High volumes can permanently damage hearing.
• DO NOT use equipment, especially headphones, when it could distract
you from activities that require attention to safety.
• DO NOT Use equipment that is not working normally or you suspect may be faulty or damaged.
• DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed
for unattended operation. Switch off using the switch on the equipment and make sure that your family
knows how to do this. Special arrangements may need to be made for infirm or handicapped people.
Always:
• Operate all controls as instructed in the manual.
• Ensure that all electrical connections (including the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug before making or changing connections.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER
SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ATTENTION The owner’s manual contains important operating and maintenance instructions, for
your safety, it is necessary to refer to the manual.
Front View
Back View
1. Aerial
2. DC in
3. AUX-IN for other devices
4. On/Off
Battery Use
Battery Removal
10
Positioning
A good place for your Retro DAB+:
- has a flat and stable surface with sufficient ventilation
- is within 1.4metres of a power socket if you are using mains power.
- has space above it for you to fully extend the telescopic aerial vertically.
- is away from bright sunlight, heat sources, humidity and dampness.
Preparing
- I f using mains power: connect the mains power lead into the socket on the back of the radio (DC IN).
Switch the mains power wall socket off. Now plug the power adaptor into the wall socket, and switch the
wall socket on.
- I f not using mains power, ensure new batteries are correctly fitted. Your Retro DAB+ can be powered by
four type ‘C’ alkaline or rechargeable batteries (not supplied). When using batteries to power the unit,
function and operation are the same as using the mains, except that a docked iPod/iPhone will not be
charged. A low power symbol will display when batteries are running low, and your Retro DAB+ will return
to standby mode when almost out of power. If operating on batteries, please switch of the mains adaptor
and remove the mains power plug from the back of the radio.
- F ully extend the radio aerial vertically for the best reception.
Switching on
-W
hen switching on for the first time, slide the power switch on the back of the radio to “ON”.
11
DAB/DAB+
1. For best reception, make sure the aerial is fully extended vertically.
2. If the display shows the clock, press (1) to switch to working mode.
3. To switch to DAB/DAB+ press MODE (7) repeatedly until the display briefly shows ‘Switch to DAB’.
a. First time use, or after Factory Reset: Your Retro DAB+ will automatically begin to quick scan for DAB/
DAB+ stations. A progress bar will show the progress of the scan, and multiplex information is shown.
Stations found will be automatically stored. The number of stations found will also be displayed at the
upper right corner of the display. The first station available will be shown on the display and played
automatically. If no DAB/DAB+ signal is detected, “No Signal” will be displayed.
b. Subsequent use: Your last selected station will be displayed, tuned and played if possible.
The display will show the Station Name and ‘DAB’ on the top line, and the Programme Type, if available, on the
second line.
6. To manually tune to DAB/DAB+ stations, press and hold (5) until ‘Manual tune’ is displayed. Now press
(4) or (6) to scroll through channel 5A-13F. Press (5) button to confirm the channel, then press
(4) or (6) to scroll through stations in this channel, and press (5) to play the selected station.
12
8. To select a preset station: press and release PRE (3). Press (4) or (6) to cycle through your presets
and press (5) to select the preset station currently displayed.
9. To display station information, repeatedly pressing INFO (8) will cycle through station
information that can include Dynamic Label Segment (DLS) or radiotext, station name,
time and date, frequency, stereo/mono, bit rate or signal quality. The information
type you select will then be displayed for the current DAB/DAB+ station.
10. To set the time: in DAB/DAB+ mode your Retro DAB+ will synchronize with the time and date of the station.
FM
1. For best reception, make sure the aerial is fully extended vertically.
2. If the display shows the clock, press (1) to switch to working mode.
3. To switch to FM press MODE (7) repeatedly until the display briefly shows ‘Switch to FM’.
a. First time use, or after Factory Reset: Your Retro DAB+ will tune to and
display 87.70MHz, the lowest point of the FM spectrum
b. Subsequent use: Your last selected station will be displayed, tuned and played if possible.
4. To autoscan stations, briefly press (2) to search for stations up the FM spectrum. Yor Retro DAB+ will
stop the scan and play the first station it finds. To search down the spectrum, long press (2).
13
5. To search for stations manually or find a specific frequency, briefly press (4) or (6) to change
frequency in 0.05MHz steps down or up. Hold (4) or (6) to tune rapidly down or up the spectrum.
Scanning will stop when the button is released.
7. To select a preset station: press and release PRE (3). Press (4) or (6) to cycle through your presets
and press (5) to select the preset station currently displayed.
8. To display station information, repeatedly pressing INFO (8) will cycle through station information that can
include radiotext, programme type, signal strength bar, date/time, frequency, stereo/mono. The information
type you select will then be displayed for the FM stations you select.
9. To switch between stereo and mono in FM mode, press (5) to switch between Stereo and Mono.
Switching to mono can improve the listening experience for weak stations.
10. To set the time: in FM mode your Retro DAB+ will synchronize with the time and date of the station.
iPod or iPhone
1. Connect your iPod/iPhone: gently push the spring-loaded panel with the View Quest logo on it. It will slide
out to reveal the iPod/iPhone connector. Dock your iPod/iPhone.
2. If the display shows the clock, press (1) to switch to working mode.
3. To switch to iPod/iPhone press MODE (7) repeatedly until the display briefly shows ‘Switch to iPod’. The
display will then show ‘iPod Connected’. If no device is docked, it will show ‘iPod Disconnected’.
14
4. To select tracks to play, use your iPod/iPhone to navigate to your music. You can then navigate using
controls on your Retro DAB+:
a. P ress (4) or (6) to play previous or next track.
b. P ress (5) to play or pause the track.
c. Press and hold (4) or (6) to search the current track using high speed rewind or fast-forward.
Play will resume when you release the button.
AUX-IN
1. If the display shows the clock, press (1) to switch to working mode.
2. To connect the auxiliary device: plug the aux-in cable into the 3.5mm AUX-IN jack at the back of the radio.
3. To switch to AUX-IN press MODE(7) repeatedly button until the display briefly shows ‘Switch to AUX-IN’.
4. To control the playback of the auxiliary device you need to use the device’s own controls. You may need to
adjust volume on your Retro DAB+ and the auxiliary device for optimum volume and clarity.
Alarm Clock
Your Retro DAB+ has dual alarms, which can operate in both working and standby mode. You can wake up to
DAB/DAB+, FM, iPod or two different beep tones.
To set an Alarm
1. In either standby or working modes press SNOOZE ( 9) to select ALARM 1. Press it again to select ALARM 2.
In either case the status of the alarm will be displayed:
2. The top line of the display shows the alarm number, and the currently selected alarm source. The default
setting is BEEPER1. The second line of the display shows flashing alarm status, and the time the alarm is set.
4. Press (5) to select OFF or ON. If you select ON the display will show ‘Alarm Time Set’, showing current
time and a flashing setting for alarm time. Hours will flash first.
15
5. Set alarm time hours by pressing (4) or (6). Press (5) to confirm hours setting and go on to
minutes.
6. Set alarm time minutes by pressing (4) or (6). Press (5) to confirm hours setting and go on to
alarm type.
9. In Standby mode your Retro DAB+ will show bell symbols and numbers to show which alarms are active.
16
Alarm Sounds
- If the alarm is set to DAB/DAB+ mode and no DAB/DAB+ stations can be received, BEEP Tone1 will sound.
- If the alarm is set to “iPod” mode and there is no iPod connected, BEEP Tone1 will sound.
- Whether “iPod” or “BEEPER” alarms are sounding, docking or removing an iPod or iPhone will turn off the
alarm.
- If two alarms are set, when ALARM 1 is sounding and ALARM 2 begins to sound, it will automatically turn
off ALARM 2.
Alarm volume
Whichever alarm mode is selected, the alarm volume will be half the maximum volume.
Sleep Timer
You can send your Retro DAB+ to sleep for up to 90 minutes time.
In working mode, press and hold SNOOZE (9) to enter sleep function setting. The display will show ‘Sleep
Timer‘ with “OFF” flashing on the lower right. Press (4) or (6) to select sleep time from 15min, 30min,
45min, 60min or 90min. Press (5) to confirm your selection.
Sleep time will be displayed as ‘Snn’ on the upper right of the screen, where ‘nn’ is the sleep time selected.
To cancel the sleep timer, follow instructions above and select ‘off’ instead of a sleep time.
Other Operations
Your Retro DAB+ has two functions that you are only likely to need in the unlikely event of a problem while in
conversation with support.
Factory Reset
[Note] Factory Reset will cancel all your presets
In working mode, press and hold “MODE” button until “Press Enter Key to Reset” is displayed. Then press
(5) to confirm. “System Reset, then System Reset OK” will display.
Software Version
In working mode, press and hold INFO to check the software version.
17
18
Electrical and electronic products displaying the crossed out wheeled bin symbol above must not be disposed of
in general household waste. Take the product to a recycling facility that accepts electrical and electronic products.
Check with your Local Authority for your nearest recycling centre.
View Quest
9-10 Mill Lane
Alton
Hampshire
GU34 2QG
UNITED KINGDOM
support@viewquest.co.uk
19
Specifications
20