Documente Academic
Documente Profesional
Documente Cultură
This download contains a file named "GS_v2_0_0.pkg". Please copy this file from your computer onto the
root of a FAT32-formatted USB storage device and follow the procedure below.
Note: USB storage devices, such as MS-DOS FAT16 or FAT32-formatted flash media or disks can be used.
Other formats, including NTFS (Windows) or HFS+ (Mac OS X), will not work. Most USB flash drives use
FAT32 by default.
Note: If a "Scanning" and "Waiting to rescan" messages are displayed repeatedly, please ensure that the
"GS_v2_0_0.pkg" file is copied correctly on the root (top level; not within a folder) of the USB storage
device, and repeat the steps. If the error persists, please try reformatting the USB storage device or try a
different USB storage device.
4) When the update is finished, the display will read “Completed, Please Turn Off”.
Note: “Factory Reset” function will reset (initialize) the favorite data and system settings data. Any edited or
newly created favorite data will be overwritten, and your data will be lost. If you want to keep your favorite
data, save the data to a USB storage device. All system settings (including calibration data) will be reset,
and you will need to make your settings and perform calibration once more.
1) Press the SYSTEM button, and select “Factory Reset” using the VARIATION knob. “[Press EDIT]” will
blink on the third line of the display.
Note: If you wish to cancel the reset to factory default settings while “[Press EDIT]” is blinking, select a
parameter using the VARIATION knob, or press the SYSTEM or EXIT button to finish system settings.
2) Press the EDIT button. The words “OK? [Press EDIT]” will blink on the third line of the display, to
reconfirm that you wish to reset the data.
4) When the reset is completed, the word “Completed” will be shown on the third line of the display.
The preload favorites are shown in the Favorite List, found in the “Grandstage Ver.2.0 Sound Name List”.
Download this manual at www.korg.com.