Documente Academic
Documente Profesional
Documente Cultură
The distinctive edge holds the With a choice of pre-assembled normal washer The protruding hammer-in pin
expansion clip in position even or large washer GS and with washer HBS in protects the thread from damage
with reinforcement hits, thus compliance with wood construction standard during setting.
ensuring safe installation. DIN 1052 (not pre-assembled).
NEW
The interaction of cone and expansion clip significantly The eight new sizes of the special cap
increases load-bearing capacity and makes minimum nut version (M10 and M12) can be
edge distance and axial spacing possible. used for the application on
sophisticated design. They are also
NEW implemented in the ETA assessment.
Approvals
ETA-05/0069
ETAG 001