Documente Academic
Documente Profesional
Documente Cultură
1104D-44T
74.5 kW / 99.9 bhp at 2200 rpm
Component Commonality
Shared front and rear ends and ‘repeated’ components - pistons, con rods and
valve gear.
Rationalised inventory, streamlined training and consistent serviceability.
Reduced Noise
Noise minimised at source - engine sound levels have been reduced by up to
With the success of their 1100 Series, 1 dBA.
single platform engines, Perkins have Reduction in noise suppression costs.
taken development further with the
introduction of the new 1100D range Lower Installation Costs
to the Series.
Virtually identical hook-up points and envelope size as the 1104C model.
Customer enjoys a seamless transition during the emissions changeover process.
The 1100D range is the ultimate
power solution and available with
mechanical or electronic control. All
Lower Operating Costs
Service intervals are 500 hours standard.
electronically controlled models in this
Perkins comprehensive warranty cover for two years (up to 3,000 hours). With
range now incorporate proven
components of Caterpillar® ACERTTM three years on major engine components.
Low usage warranty package is also available.
Technology.
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (US) standards.
Stage IIIA refers to European standards.
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1
Derating may be required for conditions outside these; consult Perkins Engines Company Limited
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No. 1835/01/08 Produced in England ©2006 Perkins Engines Company Limited
1100 Series
1104D-44T
Engine Specification 663 mm 597 mm
Engine ratings
SAE A or SAE B PTO drive
Timing case and gear driven auxiliaries
Flywheel housings
Flywheel and starter rings
Oil filter positions
Adapter plates
Starter motors
Fan drives and locations 810 mm
x
390
Exhaust manifolds 380
370
Fuel filter positions
Torque (Nm)
360
350
330
N
Engine mountings 320
A
310
85
Power (kW)
60
55
50
45
40
35
30
General Data 25
20
15
Number of cylinders 4 vertical in-line 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1835/01/08 Produced in England ©2006 Perkins Engines Company Limited