Documente Academic
Documente Profesional
Documente Cultură
The core is built with high permeability grain oriented silicon steel
laminations for low losses. The windings are copper wire with copper
plate double isolation. The concentric distribution of the coils prevents
magnetic flux leakage, achieving greater accuracy and higher capacity to
INDOOR withstand mechanical stresses in adverse operating conditions.
60 Hertz
Partial Discharge measurements exceed the IEEE, CAN/CSA and IEC
requirements.
Mechanical characteristics
Insulation Material Colors Weight (lbs.)
Resin Gray 62
4.92” (125)
10.8” (274)
11.98” (304)
H1
Sealable
cover Secondary
terminals
ONE
SECONDARY
MARKING
(Single H1 H2
Primary
Ratio)
X1 X2
Electrical characteristics
Power-Frequency
Continuous Rated Withstand Voltage
Nominal
IEEE Rated Voltage Thermal (1 min)
Primary Secondary Voltage BIL
Code Ratio Metering Voltage Factor Burden
(V) (V) System (kV) Primary & Secondary
Accuracy Factor 30 s (VA)
(kV) Secondary Winding
(Un) (Un)
(kVrms) (kVrms)
753681100 100:1 12000/20780GY 120 0.6 W,X,M 1.1 1.25 350 25 125 50 2.5
753681120 120:1 14400/24940GY 120 0.6 W,X,M 1.1 1.25 350 25 125 50 2.5
Notes: