Documente Academic
Documente Profesional
Documente Cultură
Sector : Electronics
Qualification Title : Computer Systems Servicing NC II
Unit of Competency : Set-Up Computer Networks
Module Title : Setting-up Computer Networks
Learning Outcomes:
L.0.1 Install Network Cables
L.0.2 Set Network Configuration
L.0.3 Set router/Wi-Fi/wireless access point/repeater configuration
L.0.4 Inspect and test the configured computer networks
A. INTRODUCTION
This module covers the knowledge, skills and attitudes in setting-up computer networks including such as installing network
cables, configuring network and devices such as router, wireless access-point, repeater, and testing the configured computer
networks.
B. LEARNING ACTIVITIES
LO 1: Install Network Cables
Learning Content Methods Presentation Practice Feedback Resources Time
OHS Standards and Individualized Read Information Sheet Answer Self- Compare CBLM
5S Principles Learning Method 2.1-1 on OHS Standards check 2.1-1 answers with 30
and 5S Principles the answer key mins.
2.1.1
Computer Network Individualized Read Information Sheet Answer Self- Compare CBLM 1 hrs.
Concepts Learning Method 2.1-2 in Computer check 2.1-2 answers with
Configuration Individualized Read Information Sheet Answer Self- Compare CBLM 1 hrs.
procedure for Learning Method 2.3-4 on Configuration check 2.3-4 answers with
router, access procedure for router, the answer key
Performance Test: At the end of the first module the students should be able to perform the following tasks:
1. Prepare to Install Network Cables
2. Make cable splicing
3. Install Network Cables
4. Set-up Network Configuration
5. Set-up Router & Access Point
6. Test the Computer Network