Documente Academic
Documente Profesional
Documente Cultură
No.: 1.004.9000
with elastomer joint Small, handy, compact and robust
No.: 1.004.9001 Type of protection: IP65
with ball joint
Exact switching steps
Mounted on elastomer joint - available with ball joint if
required
Double seal - continues to be waterproof and dust-tight
even if boot is damaged
Safety assured with separate directional switches in
each direction
Standard potentiometer control - electrical step control
available on request
Ergonomic control knob - suitable for installation in re-
stricted spaces
Industrial joystick for machines, robots, orthopedic
equipment, etc.
64°
55
41
12,9
3.5
6 1 2 3 4 5 6 7
left O-ring
3.5
81.2
1
5 3 2
50
3
55
44
41
right 4
5
2.54
6
4 7
7
1
27
right zero-pos.
max. 5.5
min. 2.0
left zero-pos. 2
44
3
Wiring diagramm View from below Blind taped hole M3x5
1234 5 6 7
Directional switch:
3.930.1006
Cross gate MSA2 Contact resistance < 2 kW
3.135.1001 Max. power dissipation 5 mW
Single gate MS Please use pull up or pull down resistors
3.135.1002 (10 - 22 kW) for termination
Operating conditions:
Single gate MS
Type of protection IP 65
3.135.1002
Temperature range - 20° to +70°C
H-gate MSA2 Options:
3.135.1003 Ball joint (not double sealed)
Circular-gate
Limit stop 25°
3.135.1004