Documente Academic
Documente Profesional
Documente Cultură
1.1. Price 价格
Model 型号 Directions 说明 报价
GDW-HS-7T/D Standard starch
98,750.00USD
-standard processing line
Note: Quotation is valid until June 5th, 2020
报价有效期至 2020 年 6 月 5 日。
30% of the contract value to be paid by T/T upon signature of the contract.
合同签订后,甲方将合同总价 30%的定金电汇到乙方账户,乙方收到定金后合同生效。
65% of the contract value to be paid by T/T at one time send out goods.
甲方提设备时付合同总价 65%的设备款。
Starting from the entry into force of the contract to delivery approx. 2 months.
1.4. Guarantees 保证
Provided a full set of Cassava starch processing equipment, is currently the most advanced
1.6. Secrecy 保密
Party A will not be in this contract, annex and the project-related information leaked
to any of the contract without customs units and individuals; Party B will provide the
new information of developed technology and equipment level for Party A, in order to
Party A use the updated technology.
此报价书含有我公司重要的商业信息和工程技术资料并作为内部使用,未经我公
司进行书面许可不得出版、向他人提供或用作其他目的,同时对于泄漏本报价书中任何
重要信息的行为,我公司将追究法律责任。
南阳市固德威机械装备有限公司
Contact :Iris Xu
Tel: +8618638955099
Cassava starch processing factory :
Part 2 Design basis 设计基础
A Washing unit/清洗单元
Transit pot
C4 Pc/台 1 SS
(by youself)
Concentration
SS
D1 hydro-cyclone G-XLQ-360 Pc/台 2
不锈钢
浓缩旋流器
Washing hydrocyclone SS
D3 G-XLQ-360 Pc/台 2
洗涤旋流器 不锈钢
E Dewatering unit/脱水单元
Vacuum filter SS
E1 G-TS-10 Pc/台 1 0.5 0.5
真空脱水机 不锈钢
Vacuum pump CS
E2 Pc/台 1 11 11
真空泵 碳钢
Self-sucking pump SS
E3 Pc/台 1 1.5 1.5
自吸泵 不锈钢
Filtrate tank SS
E4 Pc/台 1
滤液罐 不锈钢
Wet starch conveyor
E5 Pc/台 1 组合件 1.1 1.1
湿淀粉输送带
The gas-liquid
CS
E6 separator Pc/台 1
碳钢
气液分离器
Electromagnetic
SS
J1 flowmeter Pc/台 2
不锈钢
电磁流量计
Temperature sensor SS
J2 Pc/台 1
温度传感器 不锈钢
J3 设备连接管件阀门 若干
其它
Spare parts of one
L years For free
一年备品备件
Special tool
M For free
专用工具
Supervision of
Intallation,Commiss 100USD/
N
ioning and Training DAY
指导安装、调试和培训
TOTAL
110kw
合计
1. Hot air sucked in along with max. 40% moisture fed in.
2. Digital Control to make sure the powder can not be burnt
3. Flash speed powder go through the drying tower, more than 10 m high
4. Dry powder collected from the collector, but tailings are collected by another end to
make sure completely collection.
5. Starch powder needs to be screened again to make sure no leaves or other things got
in.
6. Connected with automatic weighing and packaging machine.
7. Aluminum or Stainless Steel can be selected
8. 24 Hours Continuous work available
9. Moisture max. 13% for the ready-to-pack powders
10. Heat resource can be built by yourself or use steam boiler.
We do not offer bags for packaging, the weighing scope is 5KG-50KG adjustable.
4 Boiler 0.7 provide
锅炉 megw by self
Packing Machine set 1 4 5300
包装机 USD
1500
Pump 泵组 USD
指导安装、调试、试运行
Seller will be responsible for dispatching the experienced technical personnel to have on site
technical supervision of installation, commissioning for the buyer.
卖方将负责派有经验的技术人员到买方合同设备现场进行指导安装调试;
Within the scope of supervision of start-up, supplier shall perform the following supervisory
service:
在指导试运行服务范围内,供货方提供下列服务:
Advising the Buyer with regard to the Buyer's personnel to be employed for the operation
and maintenance of the plant.
指导买方工作人员操作和维护车间。
Advising the Buyer on the initial production run of the plant.
指导首次生产。
Instructing and training Buyer's staff with regard to normal production conditions of the
plant, and special operating conditions and emergencies.
对工作人员进行工厂正常生产状态、特殊运行状态和紧急状态的指导和培训。
Supervision of the activities of the Buyer's operating staff up to the date, when the plant is
ready for the trial run.
当工厂准备好试运行时,指导买方操作人员的操作。
Supervision of the Buyer's operating staff during the performance run.
在性能测试期间指导买方操作人员的操作。
Seller will be responsible for giving the detailed explanations for the technical
documentations, drawings, operation manuals, equipment performance and relevant
notice for the buyer’s technical personnel, and answer & solve all technical questions.
卖方技术人员将对技术文件、图纸、操作手册、设备性能和注意事项进行详细正
确的讲解,并回答和解决买方提出有关合同方面的技术问题。
Man-day specified in this section guarantee to meet all requirements from erection of
whole production line, commissioning, test-run, performance test up to final acceptance.
Only if the delay is caused by the end user’s problem, the buyer would pay additional cost.
The daily man-rate is $100.
卖方的技术服务人员确保整条生产线安装、调度、试运行、性能测试直至最终合格
产品及验收全部工作需要。只有因项目业主或买方原因造成技术服务的延时,业主
或买方才负责支付延时的技术服务费用每人每天 100 美元。
Seller shall send the qualified technical personnel to make the guide and training plan.
The place for Technical training is the End-user’s site.
卖方派有资格的技术人员指导并制定培训内容,并对买方技术人员进行培训,技
术培训的地点为最终用户现场。
Seller will guarantee that the buyer’s technical personnel can skillfully operate & maintain
the equipment, and skillfully adjust the technology & solve the equipment problems in
time after the technical training.
通过技术培训,确保买方的技术人员能够掌握操作和维修技术,能熟练地调整工
艺和及时处理各种故障。
The trainees participate in the pre-operational activities. This includes the final erection
activities, dummy runs, start-up and plant operation, to learn the necessary practices
related to equipment and operation. This training will be done by our supervisory
personnel, during construction and commissioning.
受培训人员在安装完成、模拟运行、试运行和正常运行期间学习必要的关于设备
和操作方面的技能。此项培训工作将由卖方安装、试车和试运行总负责人在安装
和试车阶段进行。
The warranty period of the equipment and materials of the Contract plant supplied by the
Seller shall be 12 months after the date of acceptance of the Contract plant by the Buyer,
but not later than 18 month after the date of delivery.
卖方将在合同项目验收日后 1 个生产期即 12 个月内提供免费技术服务并跟踪
进行持续的技术更新服务,但日期不迟于交货后 18 个月。
Within the validity period of the Contract, the Seller answer in time the questions put
forward by the Buyer in connection with the design and technical items in the scope of the
Contract and provide free of charge the relevant technical documentation to the Buyer.
在合同质保期内,卖方应及时答复在合同范围内相关设计好技术问题等内容,并
免费提供给买方相关的技术文件。
If any defective equipment and materials are found, the Buyer is obliged to notify the
Seller within 1 week by fax and the Seller shall give a reply within 1 week.
如发现设备和材料缺陷,买方应立即在一周之内通过传真告知卖方,卖方应在一
周之内给予回复。
Technical Details:
Multi-stage cleaning :
Comprehensive use of a variety of cleaning methods to improve the
cleanliness of raw materials
"Cleaning" is one of the most important steps in the production process of
potato starch. The cleanliness of raw material cleaning is directly related to the
quality of starch and the difficulty of subsequent processing. For decades,
Goodway has created a multi-stage cleaning system through in-depth
research on cassava deep processing machinery and combined with the
actual processing experience of potato. Adopting multi-pass cleaning process,
through the unique technology of friction between raw materials, high-pressure
water flow washing, mechanical soaking and sputum, using the principle of
bionics, the raw materials are fully cleaned, and the subsequent equipment is
protected, thus prolonging the service life of the production line.
Outer tube
Overall dimensions rotating POWER PROCESS CAPACITY
Model diameter
(MM) speed(t/m) (kw) (T/H)
(MM)
Crushing& Filtering:
60% energy saving, 50% water saving, and filtration rate up to 98%
Crushing and filtration are important steps affecting the extraction rate of
tapioca starch. At the same time, it also has certain influence on the quality of
starch. Crushing and filtration is also an important part of energy consumption
and water consumption in starch processing. Therefore, the quality of crushing
and filtering machinery directly affects the processing of starch. benefit.
GOODWAY brings together the traditional milling technology, relying on the
advantages of German technology, combined with the six inventions of
GOODWAY, to improve the processing efficiency by more than 30%, while
saving 60% energy and saving 50%.
Curved net extrusion type crusher
Six inventions, international leader
1: The unique "2345" crushing and filtering technology is fully developed by
GOODWAY Black Technology. The free starch filtration rate is as high as 98%
and the performance is excellent.
2: Unique internal water circulation system to save water and reduce
consumption.
Product use: used for crushing and sieving of sweet potato, potato, cassava,
cannabis and other raw materials.
Product performance advantages:
Using "2345" pulverization filtration technology, the starch filtration rate is as
high as 98%:
Curved net extrusion type crusher combines the traditional milling technology,
relying on the advantages of German equipment, combined with the six
inventions of GOODWAY, using the two-stage smashing, 3-stage squeezing,
and 4-level scouring, independently developed by Goodway. The unique
process of sequential filtration and sequential circulation, many indicators
reach the international leading level, the starch filtration rate can be as high as
98%, which is the perfect combination of GOODWAY's leading technology and
years of practical experience.
Two-stage crushing, fully breaking the wall, saving energy and reducing
consumption:
The first stage uses honing pulverization, the second stage uses hammer
pulverization, and the combination of the two smashing methods fully
compensates for their respective defects. Combining sieving and pulverizing,
the primary honed material is first sieved to remove most of the starch and
viscous material, which can reduce the viscosity of the material and reduce the
retardation of the material during secondary pulverization. The pulverization
also acts as a powerful agitation to greatly increase the material separation
rate, thereby reducing the overall energy consumption.
The first-stage pulverization adopts the nail roller specially invented by
GOODWAY, and the lengthened roller body of up to 1100 mm is designed to
increase the contact area of materials. The sturdy and durable can
continuously produce more than 1000 tons without replacing the nails to
ensure the continuity of operation. . The secondary pulverization is carried out
by sorting hammers, and the materials that have been crushed are separated
first to avoid excessive crushing and waste of power.
Three-stage extrusion, energy saving and water saving, promoting
extraction
The starch is completely free. By prolonging the washing time and increasing
the filtration strength, the starch and the potato residue are fully released.
Multi-stage circulation of pulverization/panning/pressure filtration, the starch
liberation rate can reach over 98%, the starch extraction is more thorough, and
the moisture content of the ultimate material is low, which is convenient for the
next step.
Bionic robot feeding, improving processing efficiency by more than 30%.
The panning room is designed for the inner wall of the elastic ribs invented by
GOODWAY, which produces oscillating water waves, supplemented by
traditional mixing and three-dimensional jet water flow, triple action, deep
panning, and improved filtration rate.
Energy saving and water saving: 50% water saving compared with
traditional technology, energy saving 60%
1: Countercurrent water, squeeze filtration and internal strong water circulation,
saving 50% compared to traditional processes.
2: The equipment integrates multiple functions into one, and the pulverization
and filtration integration ensures the process time is shortened and the energy
loss during transportation is reduced. Sorting pulverization is different from
forced crushing by direct hammering or grinding. After the first-stage crushing,
the particles that do not meet the requirements are transferred to the
secondary pulverization to reduce energy consumption. The use of pressure
less percolation and extrusion filtration replaces traditional centrifugal force
filtration to ensure the filtration effect while further reducing energy
consumption. Compared to traditional processes, the overall energy
consumption is reduced by approximately 60%.
Reliable performance and stable operation:
1: Introducing advanced processing equipment and processing technology
from Germany, the production process is precise and meticulous.
2:Scientific and rigorous quality control system, “zero defect” quality
management mode.
5: Less wear and tear, less convenient maintenance.
4: Static balance, 6-point precise positioning, the running parts are corrected
by high-precision large-scale balancer to eliminate unbalanced factors, and the
dynamic balance index exceeds G2.5 level to ensure stable operation of the
equipment.
5: Except for the pulverized parts, most of the parts operate at low speed,
avoiding excessive vibration and centrifugal force, and effectively extending
the service life of the equipment.
Cassava processing type:
Model capacity(t/h) power(kw)
GD-MS-Q-660 2-3 26
GD-MS-Q-900 4-5 37
GD-MS-Q-1200 6-8 60
Fine filter :
The filtered starch is initially filtered.
Two-stage fine filtration, 120-140 mesh screen, finer filtration.
It is used to produce high purity white starch extracts and can also be used for
filtration of coarse starch processing and small scale starch processing.
size capacity power
Model
(mm) (m3/h) (kw)
Refine filter:
Sand removal:
Remove mud and clean, guarantee starch quality
In addition to sand and mud removal, it determines the taste of the finished
starch and the quality of the starch. Once the treatment is not fine enough, it
will lead to the appearance of raw starch and gums. GOODWAY invested tens
of thousands of dollars to introduce German technology, combined with
traditional technology, fully removes fine particles of starch and ensures starch
quality.
Sand remover
Remove traces of grit that are missing during the cleaning process based on
the principle of centrifugal sedimentation and density difference
Easy to install, operate, and maintain low cost
Small size, large processing capacity, saving on-site space
De-sander
German technology, strong de-silting.
starch de-silting, pulp de-sanding, river water, well water sand
removal, liquid-solid separation, etc.
Introducing German technology, multi-stage anti-high pressure coil design, fine
sediment removal thoroughly
ombine to ensure the full
removal of sediment in starch and ensure the basic quality of starch
Unique continuous sludge removal design to ensure continuous operation
Product Specifications:
Cyclone
Applicable flow motor Common series
Model specification
(m3/h) (kw) (level)
(mm)
1600×1500×160
GD-TS-03 3 1.5
0
1600×1500×160
GD-TS-05 5 1.5
0
1600×1800×190
GD-TS-06 6 3
-0.4 0
~ 约 40% 10-17 0.15-0.3
2200×1800×
GD-TS-10 10 -0.7 3
1900
4200×1900×
GD-TS-16 16 5.5
2100
4300×2800×
GD-TS-25 25 7.5
3000
Starch drying:
Low temperature and high air volume, multi-point temperature control,
quality assurance
Vertical space installation, negative pressure operation, reduce indoor pipeline,
ensure safe operation; multi-point temperature control, low temperature and
high air volume drying, effectively avoid starch gelatinization, ensure starch
quality; finished products are not in contact with the outside world, no pollution,
guarantee quality; Conical receiving hopper, 85 °large angle drop powder, to
avoid the accumulation of material to form a blockage; increase the tail powder
recovery system to fully guarantee the rate of powder collection.
product description:
Airflow drying is also called instant drying. It is the rapid removal of water
(mainly surface water) from small particles that are easily dehydrated and in
powdery wet materials. In airflow drying, the quality of the product after drying
is optimally guaranteed due to the extremely short residence time of the
material. GOODWAY integrates the most advanced technologies at home and
abroad to provide high-quality complete sets of equipment for starch, modified
starch, pharmaceutical, chemical, food and other industries.
Features:
High drying strength, small equipment investment, large evaporation
capacity, from 50 kg / h to 2000 kg / h
sensitive materials, finished products are
not in contact with the outside world, no pollution, good quality
Product Specifications:
GD-HG-1000 20 30 40-50
GD-HG-1500 30 37 60-70
GD-HG-2000 50 55 100-120
Automatic packaging machine:
Main uses of the product:
Suitable for packaging of starch, flour, glucose, alkalis, chemical raw
materials, building materials, ultra-fine powders, etc.
Product material selection:
Materials used for starch, glucose, pharmaceutical and alkali foods are
made of pure stainless steel material from the inlet to the outlet in order to
avoid corrosion and ensure absolute hygiene.
Product performance characteristics:
It integrates automatic weighing, tapping, conveying, sewing and sewing,
and has a compact structure, novel design and convenient operation.
It adopts advanced digital frequency conversion technology, adopts fast,
medium and slow three-speed feeding mode, adopts high-precision sensor,
high-speed AD sampling processing and anti-interference technology to
realize automatic error correction and compensation, accurate measurement,
energy saving and power saving. Stable and reliable.
It has multi-function display functions such as display weight, accumulated
number of packages, working status, etc., and is equipped with RS485/RS232
communication interface, which is convenient for remote monitoring.
technical parameter:
技术参数:
型号 称量范围 产量 精度 电源 气源 功率
Ac380v±10%
100—240 0.4MPam
GD-D25-A 型 20—40kg OIMR61×(0.2) Ac220v±10% 2.2Kw
袋/小时 ³/h
Ac50HZ±10%
OUR CASSAVA STARCH PROJECT IN AFRICA:
Nigeria 200Tons day Input Cassava Starch Processing Plant:
Zambia 100Tons per day Input Cassava Starch Processing Line
Gambia 30Tons per day Input Tapioca Starch Processing Plant