Documente Academic
Documente Profesional
Documente Cultură
1. Aim/Overview of the practical: to design and study the basic amplifier using OP-
Amp
2. Task to be done: to design an inverting circuit using inverting OP-Amp, and to analyze
its waveforms.
3. Apparatus:
resistors-10 ohm and 100 ohm
CRO
Voltage supply
One OP-Amp IC 741
4. Steps for experiment/practical:
1. Click on the canvas.
2. Click on the drop down button of the desired component.
3. Now, place that component on the canvas on the required position.
4. Repeat step 2 and 3 till all the required components are placed on the canvas.
5. Make connections using wires and Y connectors.
6. Click on “START” button to start the simulation.
7. The wires will change their colour to green if the connections are correct, so now take
readings.
5. Observations chart:
S.NO INPUT FREQUENCY INPUT FEEDBACK OUTPUT
VOLTAGE / RESISTOR RESISTOR VOLTAGE
TYPE
1 1 100 10 100 -10
2 1.2 100 10 100 -12
3 1.5 100 10 100 -15
6 Calculations:
Gains=-(Rf/Ri)=-(100/10)=-10
No
8. Results :
9. Graphs (If Any): Image /Soft copy of graph paper to be attached here
Learning outcomes (What I have learnt):